[ Upstream commit a7ac22d53d ]
If two drivers were calling gpiochip_add_data_with_key(), one may be
traversing the srcu-protected list in gpio_name_to_desc(), meanwhile
other has just added its gdev in gpiodev_add_to_list_unlocked().
This creates a non-mutexed and non-protected timeframe, when one
instance is dereferencing and using &gdev->srcu, before the other
has initialized it, resulting in crash:
[ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000
[ 4.943396] Mem abort info:
[ 4.943400] ESR = 0x0000000096000005
[ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.943407] SET = 0, FnV = 0
[ 4.943410] EA = 0, S1PTW = 0
[ 4.943413] FSC = 0x05: level 1 translation fault
[ 4.943416] Data abort info:
[ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000
[ 4.961449] [ffff800272bcc000] pgd=0000000000000000
[ 4.969203] , p4d=1000000039739003
[ 4.979730] , pud=0000000000000000
[ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset"
[ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
...
[ 5.121359] pc : __srcu_read_lock+0x44/0x98
[ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0
[ 5.153671] sp : ffff8000833bb430
[ 5.298440]
[ 5.298443] Call trace:
[ 5.298445] __srcu_read_lock+0x44/0x98
[ 5.309484] gpio_name_to_desc+0x60/0x1a0
[ 5.320692] gpiochip_add_data_with_key+0x488/0xf00
5.946419] ---[ end trace 0000000000000000 ]---
Move initialization code for gdev fields before it is added to
gpio_devices, with adjacent initialization code.
Adjust goto statements to reflect modified order of operations
Fixes: 47d8b4c1d8 ("gpio: add SRCU infrastructure to struct gpio_device")
Reviewed-by: Jakub Lewalski <jakub.lewalski@nokia.com>
Signed-off-by: Paweł Narewski <pawel.narewski@nokia.com>
[Bartosz: fixed a build issue, removed stray newline]
Link: https://lore.kernel.org/r/20251224082641.10769-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
[missing commit fcc8b637c5 ("gpiolib: switch the line state notifier
to atomic"), commit dcb73cbaae ("gpio: cdev: use raw notifier for
line state events") and commit d4f335b410 ("gpiolib: rename GPIO chip
printk macros") in 6.12.y.
Both notifiers as well as both srcu inits are moved before the
scoped_guard, following same logic as in a7ac22d53d.
Rest is changes to git context only.]
Cc: stable@vger.kernel.org # 6.12
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e18533b023 ]
Use module_platform_driver() to replace module_platform_driver_probe().
The former utilizes platform_driver_register(), which allows the driver to
defer probing when it doesn't acquire the necessary resources due to probe
order. In contrast, the latter uses __platform_driver_probe(), which
includes the comment "Note that this is incompatible with deferred
probing." Since our SGPIO driver requires access to the clock resource, the
former is more suitable.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-1-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 730e5ebff4 upstream.
Commit 11a78b7944 ("ARM: OMAP: MPUIO wake updates") registers the
omap_mpuio_driver from omap_mpuio_init(), which is called from
omap_gpio_probe().
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c ("driver core: enforce
device_lock for driver_match_device()") leading to a potential deadlock
condition described in [1].
Additionally, the omap_mpuio_driver is never unregistered from the
driver core, even if the module is unloaded.
Hence, register the omap_mpuio_driver from the module initcall and
unregister it in module_exit().
Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Fixes: dc23806a7c ("driver core: enforce device_lock for driver_match_device()")
Fixes: 11a78b7944 ("ARM: OMAP: MPUIO wake updates")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260127201725.35883-1-dakr@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e64d1cb21a upstream.
GPIO Address Space handler gets a pointer to the in or out value.
This value is supposed to be at least 64-bit, but it's not limited
to be exactly 64-bit. When ACPI tables are being parsed, for
the bigger Connection():s ACPICA creates a Buffer instead of regular
Integer object. The Buffer exists as long as Namespace holds
the certain Connection(). Hence we can access the necessary bits
without worrying. On the other hand, the left shift, used in
the code, is limited by 31 (on 32-bit platforms) and otherwise
considered to be Undefined Behaviour. Also the code uses only
the first 64-bit word for the value, and anything bigger than 63
will be also subject to UB. Fix all this by modifying the code
to correctly set or clear the respective bit in the bitmap constructed
of 64-bit words.
Fixes: 59084c564c41 ("gpiolib: acpi: use BIT_ULL() for u64 mask in address space handler")
Fixes: 2c4d00cb8f ("gpiolib: acpi: Use BIT() macro to increase readability")
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095918.4157491-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ca497be00 upstream.
Marking the whole controller as sleeping due to the pinctrl calls in the
.direction_{input,output} callbacks has the unfortunate side effect that
legitimate invocations of .get and .set, which cannot themselves sleep,
in atomic context now spew WARN()s from gpiolib.
However, as Heiko points out, the driver doing this is a bit silly to
begin with, as the pinctrl .gpio_set_direction hook doesn't even care
about the direction, the hook is only used to claim the mux. And sure
enough, the .gpio_request_enable hook exists to serve this very purpose,
so switch to that and remove the problematic business entirely.
Cc: stable@vger.kernel.org
Fixes: 20cf2aed89 ("gpio: rockchip: mark the GPIO controller as sleeping")
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53ad4a948a ]
The gpio-virtuser configfs release path uses guard(mutex) to protect
the device structure. However, the device is freed before the guard
cleanup runs, causing mutex_unlock() to operate on freed memory.
Specifically, gpio_virtuser_device_config_group_release() destroys
the mutex and frees the device while still inside the guard(mutex)
scope. When the function returns, the guard cleanup invokes
mutex_unlock(&dev->lock), resulting in a slab use-after-free.
Limit the mutex lifetime by using a scoped_guard() only around the
activation check, so that the lock is released before mutex_destroy()
and kfree() are called.
Fixes: 91581c4b3f ("gpio: virtuser: new virtual testing driver for the GPIO API")
Signed-off-by: Yuhao Huang <nekowong743@gmail.com>
Link: https://lore.kernel.org/r/20260126040348.11167-1-yuhaohuang@YuhaodeMacBook-Pro.local
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0ae43d303 ]
The BIT() macro uses unsigned long, which is 32 bits on 32-bit
architectures. When iterating over GPIO pins with index >= 32,
the expression (*value & BIT(i)) causes undefined behavior due
to shifting by a value >= type width.
Since 'value' is a pointer to u64, use BIT_ULL() to ensure correct
64-bit mask on all architectures.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 2c4d00cb8f ("gpiolib: acpi: Use BIT() macro to increase readability")
Signed-off-by: Denis Sergeev <denserg.edu@gmail.com>
Reviewed-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20260126035914.16586-1-denserg.edu@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 014a17deb4 ]
GPIO drivers with latch input support may miss short pulses on input
pins even when input latching is enabled. The generic interrupt logic in
the pca953x driver reports interrupts by comparing the current input
value against the previously sampled one and only signals an event when
a level change is observed between two reads.
For short pulses, the first edge is captured when the input register is
read, but if the signal returns to its previous level before the read,
the second edge is not observed. As a result, successive pulses can
produce identical input values at read time and no level change is
detected, causing interrupts to be missed. Below timing diagram shows
this situation where the top signal is the input pin level and the
bottom signal indicates the latched value.
─────┐ ┌──*───────────────┐ ┌──*─────────────────┐ ┌──*───
│ │ . │ │ . │ │ .
│ │ │ │ │ │ │ │ │
└──*──┘ │ └──*──┘ │ └──*──┘ │
Input │ │ │ │ │ │
▼ │ ▼ │ ▼ │
IRQ │ IRQ │ IRQ │
. . .
─────┐ .┌──────────────┐ .┌────────────────┐ .┌──
│ │ │ │ │ │
│ │ │ │ │ │
└────────*┘ └────────*┘ └────────*┘
Latched │ │ │
▼ ▼ ▼
READ 0 READ 0 READ 0
NO CHANGE NO CHANGE
PCAL variants provide an interrupt status register that records which
pins triggered an interrupt, but the status and input registers cannot
be read atomically. The interrupt status is only cleared when the input
port is read, and the input value must also be read to determine the
triggering edge. If another interrupt occurs on a different line after
the status register has been read but before the input register is
sampled, that event will not be reflected in the earlier status
snapshot, so relying solely on the interrupt status register is also
insufficient.
Support for input latching and interrupt status handling was previously
added by [1], but the interrupt status-based logic was reverted by [2]
due to these issues. This patch addresses the original problem by
combining both sources of information. Events indicated by the interrupt
status register are merged with events detected through the existing
level-change logic. As a result:
* short pulses, whose second edges are invisible, are detected via the
interrupt status register, and
* interrupts that occur between the status and input reads are still
caught by the generic level-change logic.
This significantly improves robustness on devices that signal interrupts
as short pulses, while avoiding the issues that led to the earlier
reversion. In practice, even if only the first edge of a pulse is
observable, the interrupt is reliably detected.
This fixes missed interrupts from an Ilitek touch controller with its
interrupt line connected to a PCAL6416A, where active-low pulses are
approximately 200 us long.
[1] commit 44896beae6 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
[2] commit d6179f6c62 ("gpio: pca953x: Improve interrupt support")
Fixes: d6179f6c62 ("gpio: pca953x: Improve interrupt support")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251217153050.142057-1-ernestvanhoecke@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 417b0f8d08 ]
Adds support for level-triggered interrupts in the PCA953x GPIO
expander driver. Previously, the driver only supported edge-triggered
interrupts, which could lead to missed events in scenarios where an
interrupt condition persists until it is explicitly cleared.
By enabling level-triggered interrupts, the driver can now detect and
respond to sustained interrupt conditions more reliably.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20250409-gpio-pca953x-level-triggered-irq-v3-1-7f184d814934@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 014a17deb4 ("gpio: pca953x: handle short interrupt pulses on PCAL devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ab29ed505 ]
It is reported that on Acer Nitro V15 suspend only works properly if the
keyboard backlight is turned off. In looking through the issue Acer Nitro
V15 has a GPIO (#8) specified in _AEI but it has no matching notify device
in _EVT. The values for GPIO #8 change as keyboard backlight is turned on
and off.
This makes it seem that GPIO #8 is actually supposed to be solely for
keyboard backlight. Turning off the interrupt for this GPIO fixes the issue.
Add a quirk that does just that.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4169
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5666a8777a ]
Add acpi_gpio_need_run_edge_events_on_boot() getter which moves
towards isolating the GPIO ACPI and quirk APIs. It will helps
splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a594877663 ]
Introduce a new API and handle deferred list via it which moves
towards isolating the GPIO ACPI and quirk APIs. It will helps
splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b24fd5bc8e ]
Switch to use enum instead of pointers in acpi_gpio_in_ignore_list()
which moves towards isolating the GPIO ACPI and quirk APIs. It will
helps splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 00aaae60fa ]
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 2ba5772e53 ("gpio: idio-16: Define fixed direction of the GPIO lines")
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4c4e6ea4a1 ]
The generic_handle_domain_irq() function resolves the hardware IRQ
internally. The driver performed a duplicative mapping by calling
irq_find_mapping() first, which could lead to an RCU stall.
Delete the redundant irq_find_mapping() call and pass the hardware IRQ
directly to generic_handle_domain_irq().
Fixes: c5a4b6fd31 ("gpio: Add support for Intel LJCA USB GPIO driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251023070231.1305-1-vulab@iscas.ac.cn
[Bartosz: remove unused variable]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5f8aa8d4b ]
The slimbus regmap passed to the GPIO driver down from MFD does not use
fast_io. This means a mutex is used for locking and thus this GPIO chip
must not be used in atomic context. Change the can_sleep switch in
struct gpio_chip to true.
Fixes: 59c3246834 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c6ccc4dde1 upstream.
When a software-node gets added to a device which already has another
fwnode as primary node it will become the secondary fwnode for that
device.
Currently if a software-node with GPIO properties ends up as the secondary
fwnode then gpiod_find_by_fwnode() will fail to find the GPIOs.
Add a new gpiod_fwnode_lookup() helper which falls back to calling
gpiod_find_by_fwnode() with the secondary fwnode if the GPIO was not
found in the primary fwnode.
Fixes: e7f9ff5dc9 ("gpiolib: add support for software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250920200955.20403-1-hansg@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 10af0273a3 ]
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not attempt to get an IRQ
resource when probing device instance 1, otherwise the following
error is logged:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Fixes: cd33f216d2 ("gpio: mlxbf3: Add gpio driver support")
Link: https://lore.kernel.org/r/20250613163443.1065217-1-davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3e38f94606 upstream.
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
