Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI, there's been a bit of cleanup
to the core from Uwe but nothing functionality wise.
We have added several new drivers, Cadence XSPI, Ingenic JZ47xx,
Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI"
* tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits)
spi: Convert NXP flexspi to json schema
spi: spi-geni-qcom: Add support for GPI dma
spi: fsi: Fix contention in the FSI2SPI engine
spi: spi-rpc-if: Check return value of rpcif_sw_init()
spi: tegra210-quad: Put device into suspend on driver removal
spi: tegra20-slink: Put device into suspend on driver removal
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
spi: at91-usart: replacing legacy gpio interface for gpiod
spi: replace snprintf in show functions with sysfs_emit
spi: cadence: Add of_node_put() before return
spi: orion: Add of_node_put() before goto
spi: cadence-quadspi: fix dma_unmap_single() call
spi: tegra20: fix build with CONFIG_PM_SLEEP=n
spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
spi: Make several public functions private to spi.c
spi: Reorder functions to simplify the next commit
spi: Remove unused function spi_busnum_to_master()
spi: Move comment about chipselect check to the right place
spi: fsi: Print status on error
...
Pull hardening fixes and cleanups from Gustavo A. R. Silva:
"Various hardening fixes and cleanups that I've been collecting during
the last development cycle:
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic
helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments
(Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len
Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
(Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len
Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R.
Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)"
* tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
firewire: Remove function callback casts
nouveau/svm: Use kvcalloc() instead of kvzalloc()
firmware/psci: fix application of sizeof to pointer
dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
KVM: PPC: Replace zero-length array with flexible array member
aio: Prefer struct_size over open coded arithmetic
writeback: prefer struct_size over open coded arithmetic
xfs: Use kvcalloc() instead of kvzalloc()
assoc_array: Avoid open coded arithmetic in allocator arguments
Pull EFI updates from Borislav Petkov:
"The last EFI pull request which is forwarded through the tip tree, for
v5.16. From now on, Ard will be sending stuff directly.
Disable EFI runtime services by default on PREEMPT_RT, while adding
the ability to re-enable them on demand by passing efi=runtime on the
command line"
* tag 'efi-next-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Allow efi=runtime
efi: Disable runtime services on RT
This reverts commits 55845f46df and c50031f03d, since this still
causes a build failure when QCOM_SCM is a loadable module, or when
CONFIG_SMP is disabled:
ERROR: modpost: "cpu_logical_map" [drivers/firmware/qcom-scm.ko] undefined!
This be done better for 5.17, but it's too late now to rework
properly.
Fixes: c50031f03d ("firmware: qcom: scm: Don't break compile test on non-ARM platforms")
Fixes: 55845f46df ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sizeof when applied to a pointer typed expression gives the size of
the pointer.
./drivers/firmware/psci/psci_checker.c:158:41-47: ERROR application of sizeof to pointer
This issue was detected with the help of Coccinelle.
Fixes: 7401056de5 ("drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests")
Cc: stable@vger.kernel.org
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Arm FF-A updates for v5.16
Just couple of minor updates:
- Adding support for MEMORY_LEND API
- Handling compatibility with different firmware versions(especially
dealing with newer/higher versions than the one supported by the driver)
* tag 'arm-ffa-updates-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Remove unused 'compat_version' variable
firmware: arm_ffa: Add support for MEM_LEND
firmware: arm_ffa: Handle compatibility with different firmware versions
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
Link: https://lore.kernel.org/r/20211026141535.1920602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Qualcomm driver updates for v5.16
This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.
The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.
The socinfo driver learns about a few new PMICs.
SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.
Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop
* tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: qcom: smp2p: add feature negotiation and ssr ack feature support
soc: qcom: Add Sleep stats driver
dt-bindings: Introduce QCOM Sleep stats bindings
soc: qcom: socinfo: add two missing PMIC IDs
soc: qcom: rpmhpd: Make power_on actually enable the domain
soc: qcom: smem: Support reserved-memory description
dt-bindings: soc: smem: Make indirection optional
dt-bindings: sram: Document qcom,rpm-msg-ram
Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The newly added ffa_compatible_version_find() function causes a
build warning because of a variable that is never used:
drivers/firmware/arm_ffa/driver.c:180:6: error: unused variable 'compat_version' [-Werror,-Wunused-variable]
u32 compat_version;
Link: https://lore.kernel.org/r/20211026083400.3444946-1-arnd@kernel.org
Fixes: 8e3f9da608 ("firmware: arm_ffa: Handle compatibility with different firmware versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The introduction of __qcom_scm_set_boot_addr_mc() relies on
cpu_logical_map() and MPIDR_AFFINITY_LEVEL() from smp_plat.h, but only
ARM and ARM64 has this include file, so the introduction of this
dependency broke compile testing on e.g. x86_64.
Make the inclusion of smp_plat.h and the affected function depend on
ARM || ARM64 to allow the code to still be compiled.
Fixes: 55845f46df ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211025025816.2937465-1-bjorn.andersson@linaro.org
It looks like the old QCOM_SCM_BOOT_SET_ADDR API is broken on some
MSM8916 firmware versions that implement the newer SMC32 calling
convention. It just returns -EINVAL no matter which arguments are
being passed.
This does not cause any problems downstream because it first tries
to use the new multi-cluster API replacement which is working fine.
Implement support for the multi-cluster variant of the SCM call
by attempting it first but still fallback to the old call in case
of an error. Also, to be absolutely sure only use the multi-cluster
variant with the SMC calling convention since older platforms should
not need this.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-12-stephan@gerhold.net
As part of the FF-A spec, an endpoint is allowed to transfer access of,
or lend, a memory region to one or more borrowers.
Extend the existing memory sharing implementation to support
FF-A MEM_LEND functionality and expose this to other kernel drivers.
Note that upon a successful MEM_LEND request the caller must ensure that
the memory region specified is not accessed until a successful
MEM_RECALIM call has been made. On systems with a hypervisor present
this will been enforced, however on systems without a hypervisor the
responsibility falls to the calling kernel driver to prevent access.
Link: https://lore.kernel.org/r/20211015165742.2513065-1-marc.bonnici@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The driver currently just support v1.0 of Arm FFA specification. It also
expects the firmware implementation to match the same and bail out if it
doesn't match. This is causing issue when running with higher version of
firmware implementation(e.g. v1.1 which will released soon).
In order to support compatibility with different firmware versions, let
us add additional checks and find the compatible version the driver can
work with.
Link: https://lore.kernel.org/r/20211013091127.990992-1-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull EFI fixes from Borislav Petkov:
"Forwarded from Ard Biesheuvel through the tip tree. Ard will send
stuff directly in the near future.
Low priority fixes but fixes nonetheless:
- update stub diagnostic print that is no longer accurate
- avoid statically allocated buffer for CPER error record decoding
- avoid sleeping on the efi_runtime semaphore when calling the
ResetSystem EFI runtime service"
* tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
efi/cper: use stack buffer for error record decoding
efi/libstub: Simplify "Exiting bootservices" message
Qualcomm driver updates for v5.16
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: apr: Add GPR support
soc: dt-bindings: qcom: add gpr bindings
soc: qcom: apr: make code more reuseable
soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
soc: dt-bindings: qcom: apr: convert to yaml
dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
dt-bindings: msm/dp: Remove aoss-qmp header
soc: qcom: aoss: Drop power domain support
dt-bindings: soc: qcom: aoss: Drop the load state power-domain
soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
dt-bindings: soc: qcom: aoss: Add SM6350 compatible
soc: qcom: llcc: Disable MMUHWT retention
soc: qcom: smd-rpm: Add QCM2290 compatible
dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
firmware: qcom_scm: Add compatible for MSM8953 SoC
dt-bindings: firmware: qcom-scm: Document msm8953 bindings
soc: qcom: pdr: Prefer strscpy over strcpy
soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
...
Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm FF-A driver fixes for v5.15
Couple of fixes addressing issues when FFA driver is build as a module.
One adds the device unregistration which was missing and causes issue
when loading the module second time after unloading once. Another one
adds the missing remove callback on the ffa bus which was missing due
to which modules depending on FFA(e.g. OPTEE) will fail to remove the
device and faults next time that module is loaded again.
* tag 'ffa-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
Link: https://lore.kernel.org/r/20211006153231.4061789-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull asm-generic fixes from Arnd Bergmann:
"There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The fix we
agreed on in the end is to make this symbol selected by any driver
using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in
v5.15.
Finally, the branch also includes a small unrelated build fix for
NOMMU architectures"
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
qcom_scm: hide Kconfig symbol
firmware: include drivers/firmware/Kconfig unconditionally
SCMI fixes for v5.15
A few fixes addressing:
- Kconfig dependency between VIRTIO and ARM_SCMI_PROTOCOL
- Link-time error with __exit annotation for virtio_scmi_exit
- Unnecessary nested irqsave/irqrestore spinlocks in virtio transport
- Missing SMP barriers to protect accesses to SCMI virtio device
* tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add proper barriers to scmi virtio device
firmware: arm_scmi: Simplify spinlocks in virtio transport
firmware: arm_scmi: Remove __exit annotation
firmware: arm_scmi: Fix virtio transport Kconfig dependency
Link: https://lore.kernel.org/r/20211007102822.27886-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Building the bpmp-debugfs driver for Arm results in a warning for stack usage:
drivers/firmware/tegra/bpmp-debugfs.c:321:16: error: stack frame size of 1224 bytes in function 'bpmp_debug_store' [-Werror,-Wframe-larger-than=]
static ssize_t bpmp_debug_store(struct file *file, const char __user *buf,
It should be possible to rearrange the code to not require two separate
buffers for the file name, but the easiest workaround is to use dynamic
allocation.
Fixes: 5e37b9c137 ("firmware: tegra: Add support for in-band debug")
Link: https://lore.kernel.org/all/20201204193714.3134651-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[treding@nvidia.com: consistently return NULL on failure]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now that SCM can be a loadable module, we have to add another
dependency to avoid link failures when ipa or adreno-gpu are
built-in:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':
ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'
ld.lld: error: undefined symbol: qcom_scm_is_available
>>> referenced by adreno_gpu.c
>>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a
This can happen when CONFIG_ARCH_QCOM is disabled and we don't select
QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd
use a similar dependency here to what we have for QCOM_RPROC_COMMON,
but that causes dependency loops from other things selecting QCOM_SCM.
This appears to be an endless problem, so try something different this
time:
- CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on'
but that is simply selected by all of its users
- All the stubs in include/linux/qcom_scm.h can go away
- arm-smccc.h needs to provide a stub for __arm_smccc_smc() to
allow compile-testing QCOM_SCM on all architectures.
- To avoid a circular dependency chain involving RESET_CONTROLLER
and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement.
According to my testing this still builds fine, and the QCOM
platform selects this symbol already.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Only one single SCMI Virtio device is currently supported by this driver
and it is referenced using a static global variable which is initialized
once for all during probing and nullified at virtio device removal.
Add proper SMP barriers to protect accesses to such device reference to
ensure that the initialzation state of such device is correctly observed by
all PEs at any time.
Return -EBUSY, instead of -EINVAL, and a descriptive error message if more
than one SCMI Virtio device is ever found and probed.
Link: https://lore.kernel.org/r/20210916103336.7243-3-cristian.marussi@arm.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
While reboot the system by sysrq, the following bug will be occur.
BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:90
in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 10052, name: rc.shutdown
CPU: 3 PID: 10052 Comm: rc.shutdown Tainted: G W O 5.10.0 #1
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x18/0x28
dump_stack+0xd0/0x110
___might_sleep+0x14c/0x160
__might_sleep+0x74/0x88
down_interruptible+0x40/0x118
virt_efi_reset_system+0x3c/0xd0
efi_reboot+0xd4/0x11c
machine_restart+0x60/0x9c
emergency_restart+0x1c/0x2c
sysrq_handle_reboot+0x1c/0x2c
__handle_sysrq+0xd0/0x194
write_sysrq_trigger+0xbc/0xe4
proc_reg_write+0xd4/0xf0
vfs_write+0xa8/0x148
ksys_write+0x6c/0xd8
__arm64_sys_write+0x18/0x28
el0_svc_common.constprop.3+0xe4/0x16c
do_el0_svc+0x1c/0x2c
el0_svc+0x20/0x30
el0_sync_handler+0x80/0x17c
el0_sync+0x158/0x180
The reason for this problem is that irq has been disabled in
machine_restart() and then it calls down_interruptible() in
virt_efi_reset_system(), which would occur sleep in irq context,
it is dangerous! Commit 99409b935c9a("locking/semaphore: Add
might_sleep() to down_*() family") add might_sleep() in
down_interruptible(), so the bug info is here. down_trylock()
can solve this problem, cause there is no might_sleep.
--------
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Joe reports that using a statically allocated buffer for converting CPER
error records into human readable text is probably a bad idea. Even
though we are not aware of any actual issues, a stack buffer is clearly
a better choice here anyway, so let's move the buffer into the stack
frames of the two functions that refer to it.
Cc: <stable@vger.kernel.org>
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The message
"Exiting boot services and installing virtual address map...\n"
is even shown if we have efi=novamap on the command line or the firmware
does not provide EFI_RT_SUPPORTED_SET_VIRTUAL_ADDRESS_MAP.
To avoid confusion just print
"Exiting boot services...\n"
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When arm_ffa firmware driver module is unloaded or removed we call
__ffa_devices_unregister on all the devices on the ffa bus. It must
unregister all the devices instead it is currently just releasing the
devices without unregistering. That is pure wrong as when we try to
load the module back again, it will result in the kernel crash something
like below.
-->8
CPU: 2 PID: 232 Comm: modprobe Not tainted 5.15.0-rc2+ #169
Hardware name: FVP Base RevC (DT)
Call trace:
dump_backtrace+0x0/0x1cc
show_stack+0x18/0x64
dump_stack_lvl+0x64/0x7c
dump_stack+0x18/0x38
sysfs_create_dir_ns+0xe4/0x140
kobject_add_internal+0x170/0x358
kobject_add+0x94/0x100
device_add+0x178/0x5f0
device_register+0x20/0x30
ffa_device_register+0x80/0xcc [ffa_module]
ffa_setup_partitions+0x7c/0x108 [ffa_module]
init_module+0x290/0x2dc [ffa_module]
do_one_initcall+0xbc/0x230
do_init_module+0x58/0x304
load_module+0x15e0/0x1f68
__arm64_sys_finit_module+0xb8/0xf4
invoke_syscall+0x44/0x140
el0_svc_common+0xb4/0xf0
do_el0_svc+0x24/0x80
el0_svc+0x20/0x50
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x1a0/0x1a4
kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
register things with the same name in the same directory.
----
Fix the issue by calling device_unregister in __ffa_devices_unregister
which will also take care of calling device_release(which is mapped to
ffa_release_device)
Link: https://lore.kernel.org/r/20210924092859.3057562-2-sudeep.holla@arm.com
Fixes: e781858488 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently the arm_ffa firmware driver can be built as module and hence
all the users of FFA driver. If any driver on the ffa bus is removed or
unregistered, the remove callback on all the device bound to the driver
being removed should be callback. For that to happen, we must register
a remove callback on the ffa_bus which is currently missing. This results
in the probe getting called again without the previous remove callback
on a device which may result in kernel crash.
Fix the issue by registering the remove callback on the FFA bus.
Link: https://lore.kernel.org/r/20210924092859.3057562-1-sudeep.holla@arm.com
Fixes: e781858488 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In case the command line option "efi=noruntime" is default at built-time, the user
could overwrite its state by `efi=runtime' and allow it again.
This is useful on PREEMPT_RT where "efi=noruntime" is default and the
user might need to alter the boot order for instance.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Based on measurements the EFI functions get_variable /
get_next_variable take up to 2us which looks okay.
The functions get_time, set_time take around 10ms. These 10ms are too
much. Even one ms would be too much.
Ard mentioned that SetVariable might even trigger larger latencies if
the firmware will erase flash blocks on NOR.
The time-functions are used by efi-rtc and can be triggered during
run-time (either via explicit read/write or ntp sync).
The variable write could be used by pstore.
These functions can be disabled without much of a loss. The poweroff /
reboot hooks may be provided by PSCI.
Disable EFI's runtime wrappers on PREEMPT_RT.
This was observed on "EFI v2.60 by SoftIron Overdrive 1000".
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
wm_adsp originally provided firmware loading on some audio DSP and was
implemented as an ASoC codec driver. However, the firmware loading now
covers a wider range of DSP cores and peripherals containing them,
beyond just audio. So it needs to be available to non-audio drivers. All
the core firmware loading support has been moved into a new driver
cs_dsp, leaving only the ASoC-specific parts in wm_adsp.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-17-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
virtio_scmi_exit() is only called from __exit function, so the annotation
is correct, but when the driver is built-in, the section gets discarded
and the reference from a callback pointer causes a link-time error:
`virtio_scmi_exit' referenced in section `.rodata' of drivers/firmware/arm_scmi/virtio.o:
defined in discarded section `.exit.text' of drivers/firmware/arm_scmi/virtio.o
I could not figure out a better workaround, so let's just remove that
annotation even if it wastes a couple of bytes in .text.
Link: https://lore.kernel.org/r/20210920100301.1466486-2-arnd@kernel.org
Fixes: 46abe13b5e ("firmware: arm_scmi: Add virtio transport")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ARM_SCMI_TRANSPORT_VIRTIO is a 'bool' Kconfig used to include support for
the SCMI virtio transport inside the core SCMI stack; a bare transport
dependency attached here to this option, though, cannot be properly
propagated to the parent ARM_SCMI_PROTOCOL option and, as a result, it is
currently possible to configure a Kernel where SCMI core is builtin
and includes support for virtio while VirtIO core is =m.
This allowed combination breaks linking:
ARM_SCMI_PROTOCOL=y
ARM_SCMI_TRANSPORT_VIRTIO=y
VIRTIO=m
Bind the dependency in ARM_SCMI_TRANSPORT_VIRTIO to the chosen kind of
compilation of ARM_SCMI_PROTOCOL.
Link: https://lore.kernel.org/r/20210816141609.41751-1-cristian.marussi@arm.com
Fixes: 46abe13b5e ("firmware: arm_scmi: Add virtio transport")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Qualcomm Secure Channel Manager (SCM) is only present on Qualcomm
SoCs. All drivers using it select QCOM_SCM, and depend on ARCH_QCOM.
Until recently, QCOM_SCM was an invisible symbol, but this was changed
by adding loadable module support, exposing it to all ARM and ARM64
users. Hence add a dependency on ARCH_QCOM, to prevent asking the user
about this driver when configuring a kernel without Qualcomm SoC
support.
While at it, drop the dependency on ARM || ARM64, as that is implied by
HAVE_ARM_SMCCC.
Fixes: b42000e4b8 ("firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module")
Fixes: 2954a6f12f ("firmware: qcom-scm: Fix QCOM_SCM configuration")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/5cda77085c07dc2e8d2195507b287457cb2f09e9.1629807831.git.geert+renesas@glider.be
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
Pull dmi fix from Jean Delvare.
Unbreak some existing udev/hwdb modalias matches due to misplaced
product_sku field.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Move product_sku info to the end of the modalias
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
The isa_bus_to_virt is only needed under X86 and in fact the code
that sets the ibft_phys_addr is only compiled under X86.
As such lets just ifdef the code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com>
CC: Maurizio Lombardi <mlombard@redhat.com>
CC: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
v2: Remove the ibft_phys_addr as it is defined in iscsi_ibft.h
Commit e26f023e01 ("firmware/dmi: Include product_sku info to modalias")
added a new field to the modalias in the middle of the modalias, breaking
some existing udev/hwdb matches on the whole modalias without a wildcard
('*') in between the pvr and rvn fields.
All modalias matches in e.g. :
https://github.com/systemd/systemd/blob/main/hwdb.d/60-sensor.hwdb
deliberately end in ':*' so that new fields can be added at *the end* of
the modalias, but adding a new field in the middle like this breaks things.
Move the new sku field to the end of the modalias to fix some hwdb
entries no longer matching.
The new sku field has already been put to use in 2 new hwdb entries:
sensor:modalias:platform:HID-SENSOR-200073:dmi:*svnDell*:sku0A3E:*
ACCEL_LOCATION=base
sensor:modalias:platform:HID-SENSOR-200073:dmi:*svnDell*:sku0B0B:*
ACCEL_LOCATION=base
The wildcard use before and after the sku in these matches means that they
should keep working with the sku moved to the end.
Note that there is a second instance of in essence the same problem,
commit f5152f4ded ("firmware/dmi: Report DMI Bios & EC firmware release")
Added 2 new br and efr fields in the middle of the modalias. This too
breaks some hwdb modalias matches, but this has gone unnoticed for over
a year. So some newer hwdb modalias matches actually depend on these
fields being in the middle of the string. Moving these to the end now
would break 3 hwdb entries, while fixing 8 entries.
Since there is no good answer for the new br and efr fields I have chosen
to leave these as is. Instead I'll submit a hwdb update to put a wildcard
at the place where these fields may or may not be present depending on the
kernel version.
BugLink: https://github.com/systemd/systemd/issues/20550
Link: https://github.com/systemd/systemd/pull/20562
Fixes: e26f023e01 ("firmware/dmi: Include product_sku info to modalias")
Cc: stable@vger.kernel.org
Cc: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com>
Cc: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
Pull ibft updates from Konrad Rzeszutek Wilk:
"A fix for iBFT parsing code badly interfacing when KASLR is enabled"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: fix warning in reserve_ibft_region()
iscsi_ibft: fix crash due to KASLR physical memory remapping
Linus Torvalds
Arnd Bergmann
jing yangyang
Bjorn Andersson
Stephan Gerhold
Guru Das Srinagesh
Mark Brown
Marc Bonnici
Sudeep Holla
Cai Huoqing
Cristian Marussi
Zhang Jianhua
Ard Biesheuvel
Heinrich Schuchardt
Sai Krishna Potthuri
Sebastian Andrzej Siewior
Simon Trimmer
Vladimir Lypak
Geert Uytterhoeven
Konrad Rzeszutek Wilk
Hans de Goede