The vmapped pages shall be pinned in memory and previously get/put_pages()
were implicitly hard-pinning/unpinning the pages. This will no longer be
the case with addition of memory shrinker because pages_use_count > 0 won't
determine anymore whether pages are hard-pinned (they will be soft-pinned),
while the new pages_pin_count will do the hard-pinning. Switch the
vmap/vunmap() to use pin/unpin() functions in a preparation of addition
of the memory shrinker support to drm-shmem.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-10-dmitry.osipenko@collabora.com
With the bridges switching over to drm_bridge_connector, the direct
association between a bridge driver and its connector was lost.
This is mitigated for atomic bridge drivers by the fact you can access
the encoder, and then call drm_atomic_get_old_connector_for_encoder() or
drm_atomic_get_new_connector_for_encoder() with drm_atomic_state.
This was also made easier by providing drm_atomic_state directly to all
atomic hooks bridges can implement.
However, bridge drivers don't have a way to access drm_atomic_state
outside of the modeset path, like from the hotplug interrupt path or any
interrupt handler.
Let's introduce a function to retrieve the connector currently assigned
to an encoder, without using drm_atomic_state, to make these drivers'
life easier.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Co-developed-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-4-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Importing dma-bufs via PRIME requires a DMA-capable device. Devices on
peripheral busses, such as USB, often cannot perform DMA by themselves.
Without DMA-capable device PRIME import fails. DRM drivers for USB
devices already use a separate DMA device for dma-buf imports. Make the
mechanism generally available.
Besides the case of USB, there are embedded DRM devices without DMA
capability. DMA is performed by a separate controller. DRM drivers should
set this accordingly.
Add the field dma_dev to struct drm_device to refer to the device's DMA
device. For USB this should be the USB controller. Use dma_dev in the
PRIME import helpers, if set.
v2:
- acquire internal reference on dma_dev (Jani)
- add DMA-controller usecase to docs (Maxime)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307080836.42848-2-tzimmermann@suse.de
drm_sched_backend_ops.timedout_job()'s documentation is outdated. It
mentions the deprecated function drm_sched_resubmit_jobs(). Furthermore,
it does not point out the important distinction between hardware and
firmware schedulers.
Since firmware schedulers typically only use one entity per scheduler,
timeout handling is significantly more simple because the entity the
faulted job came from can just be killed without affecting innocent
processes.
Update the documentation with that distinction and other details.
Reformat the docstring to work to a unified style with the other
handles.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305130551.136682-5-phasta@kernel.org
The documentation for drm_sched_backend_ops.run_job() mentions a certain
function called drm_sched_job_recovery(). This function does not exist.
What's actually meant is drm_sched_resubmit_jobs(), which is by now also
deprecated.
Furthermore, the scheduler expects to "inherit" a reference on the fence
from the run_job() callback. This, so far, is also not documented.
Remove the mention of the removed function.
Discourage the behavior of drm_sched_backend_ops.run_job() being called
multiple times for the same job.
Document the necessity of incrementing the refcount in run_job().
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305130551.136682-3-phasta@kernel.org
Add drm_gem_is_imported() that tests if a GEM object's buffer has
been imported. Update the GEM code accordingly.
GEM code usually tests for imports if import_attach has been set
in struct drm_gem_object. But attaching a dma-buf on import requires
a DMA-capable importer device, which is not the case for many serial
busses like USB or I2C. The new helper tests if a GEM object's dma-buf
has been created from the GEM object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-2-tzimmermann@suse.de
Following the design direction communicated here:
https://lore.kernel.org/linux-mm/b7491378-defd-4f1c-31e2-29e4c77e2d67@amd.com/T/#ma918844aa8a6efe8768fdcda0c6590d5c93850c9
Export a LRU walker for driver shrinker use. The walker
initially supports only trylocking, since that's the
method used by shrinkes. The walker makes use of
scoped_guard() to allow exiting from the LRU walk loop
without performing any explicit unlocking or
cleanup.
v8:
- Split out from another patch.
- Use a struct for bool arguments to increase readability (Matt Brost).
- Unmap user-space cpu-mappings before shrinking pages.
- Explain non-fatal error codes (Matt Brost)
v10:
- Instead of using the existing helper, Wrap the interface inside out and
provide a loop to de-midlayer things the LRU iteration (Christian König).
- Removing the R-B by Matt Brost since the patch was significantly changed.
v11:
- Split the patch up to include just the LRU walk helper.
v12:
- Indent after scoped_guard() (Matt Brost)
v15:
- Adapt to new definition of scoped_guard()
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-5-thomas.hellstrom@linux.intel.com
Provide a helper to shrink ttm_tt page-vectors on a per-page
basis. A ttm_backup backend could then in theory get away with
allocating a single temporary page for each struct ttm_tt.
This is accomplished by splitting larger pages before trying to
back them up.
In the future we could allow ttm_backup to handle backing up
large pages as well, but currently there's no benefit in
doing that, since the shmem backup backend would have to
split those anyway to avoid allocating too much temporary
memory, and if the backend instead inserts pages into the
swap-cache, those are split on reclaim by the core.
Due to potential backup- and recover errors, allow partially swapped
out struct ttm_tt's, although mark them as swapped out stopping them
from being swapped out a second time. More details in the ttm_pool.c
DOC section.
v2:
- A couple of cleanups and error fixes in ttm_pool_back_up_tt.
- s/back_up/backup/
- Add a writeback parameter to the exported interface.
v8:
- Use a struct for flags for readability (Matt Brost)
- Address misc other review comments (Matt Brost)
v9:
- Update the kerneldoc for the ttm_tt::backup field.
v10:
- Rebase.
v13:
- Rebase on ttm_backup interface change. Update kerneldoc.
- Rebase and adjust ttm_tt_is_swapped().
v15:
- Rebase on ttm_backup return value change.
- Rebase on previous restructuring of ttm_pool_alloc()
- Rework the ttm_pool backup interface (Christian König)
- Remove cond_resched() (Christian König)
- Get rid of the need to allocate an intermediate page array
when restoring a multi-order page (Christian König)
- Update documentation.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-3-thomas.hellstrom@linux.intel.com
Provide a standalone shmem backup implementation.
Given the ttm_backup interface, this could
later on be extended to providing other backup
implementation than shmem, with one use-case being
GPU swapout to a user-provided fd.
v5:
- Fix a UAF. (kernel test robot, Dan Carptenter)
v6:
- Rename ttm_backup_shmem_copy_page() function argument
(Matthew Brost)
- Add some missing documentation
v8:
- Use folio_file_page to get to the page we want to writeback
instead of using the first page of the folio.
v13:
- Remove the base class abstraction (Christian König)
- Include ttm_backup_bytes_avail().
v14:
- Fix kerneldoc for ttm_backup_bytes_avail() (0-day)
- Work around casting of __randomize_layout struct pointer (0-day)
v15:
- Return negative error code from ttm_backup_backup_page()
(Christian König)
- Doc fixes. (Christian König).
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-2-thomas.hellstrom@linux.intel.com
According to the DisplayPort standard, LTTPRs have two operating
modes:
- non-transparent - it replies to DPCD LTTPR field specific AUX
requests, while passes through all other AUX requests
- transparent - it passes through all AUX requests.
Switching between this two modes is done by the DPTX by issuing
an AUX write to the DPCD PHY_REPEATER_MODE register.
Add a generic helper that allows switching between these modes.
Also add a generic wrapper for the helper that handles the explicit
disabling of non-transparent mode and its disable->enable sequence
mentioned in the DP Standard v2.0 section 3.6.6.1. Do this in order
to move this handling out of the vendor specific driver implementation
into the generic framework.
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-1-c865d0e56d6e@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
User-space cursor-image data is encoded in ARBG8888, while hardware
supports ARGB4444. Implement the format conversion as part of the
format-helper framework, so that other drivers can benefit.
This allows to respect the damage area of the cursor update. In
previous code, all cursor image data had to be converted on each
update. Now, only the changed areas require an update. The hardware
image is always updated completely, as it is required for the
checksum update.
The format-conversion helper still contains the old implementation's
optimization of writing 2 output pixels at the same time.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-3-tzimmermann@suse.de
Lyude Paul
Andy Yan
Anusha Srivatsa
Aradhya Bhatia
Dmitry Osipenko
Dmitry Baryshkov
Thomas Zimmermann
Maxime Ripard
Luca Ceresoli
Philipp Stanner
Thomas Hellström
Jani Nikula
Kerem Karabay
Abel Vesa
Tejas Vipin
Dave Airlie
Tvrtko Ursulin