mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-05-14 21:38:46 +02:00
bf94dea7fd4e6708d1a784be23db65eff84d82f1
1702 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Andrey Albershteyn
|
4dd5b5ac08 |
Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP"
This reverts commit
|
||
 Linus Torvalds
|
6238729bfc |
Merge tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi: - Extend copy_file_range interface to be fully 64bit capable (Miklos) - Add selftest for fusectl (Chen Linxuan) - Move fuse docs into a separate directory (Bagas Sanjaya) - Allow fuse to enter freezable state in some cases (Sergey Senozhatsky) - Clean up writeback accounting after removing tmp page copies (Joanne) - Optimize virtiofs request handling (Li RongQing) - Add synchronous FUSE_INIT support (Miklos) - Allow server to request prune of unused inodes (Miklos) - Fix deadlock with AIO/sync release (Darrick) - Add some prep patches for block/iomap support (Darrick) - Misc fixes and cleanups * tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (26 commits) fuse: move CREATE_TRACE_POINTS to a separate file fuse: move the backing file idr and code into a new source file fuse: enable FUSE_SYNCFS for all fuseblk servers fuse: capture the unique id of fuse commands being sent fuse: fix livelock in synchronous file put from fuseblk workers mm: fix lockdep issues in writeback handling fuse: add prune notification fuse: remove redundant calls to fuse_copy_finish() in fuse_notify() fuse: fix possibly missing fuse_copy_finish() call in fuse_notify() fuse: remove FUSE_NOTIFY_CODE_MAX from <uapi/linux/fuse.h> fuse: remove fuse_readpages_end() null mapping check fuse: fix references to fuse.rst -> fuse/fuse.rst fuse: allow synchronous FUSE_INIT fuse: zero initialize inode private data fuse: remove unused 'inode' parameter in fuse_passthrough_open virtio_fs: fix the hash table using in virtio_fs_enqueue_req() mm: remove BDI_CAP_WRITEBACK_ACCT fuse: use default writeback accounting virtio_fs: Remove redundant spinlock in virtio_fs_request_complete() fuse: remove unneeded offset assignment when filling write pages ... |
||
|
Linus Torvalds
|
829745b75a |
Merge tag 'pull-finish_no_open' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull finish_no_open updates from Al Viro: "finish_no_open calling conventions change to simplify callers" * tag 'pull-finish_no_open' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: slightly simplify nfs_atomic_open() simplify gfs2_atomic_open() simplify fuse_atomic_open() simplify nfs_atomic_open_v23() simplify vboxsf_dir_atomic_open() simplify cifs_atomic_open() 9p: simplify v9fs_vfs_atomic_open_dotl() 9p: simplify v9fs_vfs_atomic_open() allow finish_no_open(file, ERR_PTR(-E...)) |
||
|
Linus Torvalds
|
8804d970fa |
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
||
|
Linus Torvalds
|
5832d26433 |
Merge tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Store ring provided buffers locally for the users, rather than stuff
them into struct io_kiocb.
These types of buffers must always be fully consumed or recycled in
the current context, and leaving them in struct io_kiocb is hence not
a good ideas as that struct has a vastly different life time.
Basically just an architecture cleanup that can help prevent issues
with ring provided buffers in the future.
- Support for mixed CQE sizes in the same ring.
Before this change, a CQ ring either used the default 16b CQEs, or it
was setup with 32b CQE using IORING_SETUP_CQE32. For use cases where
a few 32b CQEs were needed, this caused everything else to use big
CQEs. This is wasteful both in terms of memory usage, but also memory
bandwidth for the posted CQEs.
With IORING_SETUP_CQE_MIXED, applications may use request types that
post both normal 16b and big 32b CQEs on the same ring.
- Add helpers for async data management, to make it harder for opcode
handlers to mess it up.
- Add support for multishot for uring_cmd, which ublk can use. This
helps improve efficiency, by providing a persistent request type that
can trigger multiple CQEs.
- Add initial support for ring feature querying.
We had basic support for probe operations, but the API isn't great.
Rather than expand that, add support for QUERY which is easily
expandable and can cover a lot more cases than the existing probe
support. This will help applications get a better idea of what
operations are supported on a given host.
- zcrx improvements from Pavel:
- Improve refill entry alignment for better caching
- Various cleanups, especially around deduplicating normal
memory vs dmabuf setup.
- Generalisation of the niov size (Patch 12). It's still hard
coded to PAGE_SIZE on init, but will let the user to specify
the rx buffer length on setup.
- Syscall / synchronous bufer return. It'll be used as a slow
fallback path for returning buffers when the refill queue is
full. Useful for tolerating slight queue size misconfiguration
or with inconsistent load.
- Accounting more memory to cgroups.
- Additional independent cleanups that will also be useful for
mutli-area support.
- Various fixes and cleanups
* tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
io_uring: fix nvme's 32b cqes on mixed cq
io_uring/query: cap number of queries
io_uring/query: prevent infinite loops
io_uring/zcrx: account niov arrays to cgroup
io_uring/zcrx: allow synchronous buffer return
io_uring/zcrx: introduce io_parse_rqe()
io_uring/zcrx: don't adjust free cache space
io_uring/zcrx: use guards for the refill lock
io_uring/zcrx: reduce netmem scope in refill
io_uring/zcrx: protect netdev with pp_lock
io_uring/zcrx: rename dma lock
io_uring/zcrx: make niov size variable
io_uring/zcrx: set sgt for umem area
io_uring/zcrx: remove dmabuf_offset
io_uring/zcrx: deduplicate area mapping
io_uring/zcrx: pass ifq to io_zcrx_alloc_fallback()
io_uring/zcrx: check all niovs filled with dma addresses
io_uring/zcrx: move area reg checks into io_import_area
io_uring/zcrx: don't pass slot to io_zcrx_create_area
...
|
||
|
Linus Torvalds
|
b786405685 |
Merge tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs workqueue updates from Christian Brauner: "This contains various workqueue changes affecting the filesystem layer. Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This replaces the use of system_wq and system_unbound_wq. system_wq is a per-CPU workqueue which isn't very obvious from the name and system_unbound_wq is to be used when locality is not required. So this renames system_wq to system_percpu_wq, and system_unbound_wq to system_dfl_wq. This also adds a new WQ_PERCPU flag to allow the fs subsystem users to explicitly request the use of per-CPU behavior. Both WQ_UNBOUND and WQ_PERCPU flags coexist for one release cycle to allow callers to transition their calls. WQ_UNBOUND will be removed in a next release cycle" * tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: WQ_PERCPU added to alloc_workqueue users fs: replace use of system_wq with system_percpu_wq fs: replace use of system_unbound_wq with system_dfl_wq |
||
|
Linus Torvalds
|
b7ce6fa90f |
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
|
||
 Darrick J. Wong
|
cb40359470 |
fuse: move CREATE_TRACE_POINTS to a separate file
Before we start adding new tracepoints for fuse+iomap, move the tracepoint creation itself to a separate source file so that we don't have to start pulling iomap dependencies into dev.c just for the iomap structures. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Darrick J. Wong
|
c4331e19a6 |
fuse: move the backing file idr and code into a new source file
iomap support for fuse is also going to want the ability to attach backing files to a fuse filesystem. Move the fuse_backing code into a separate file so that both can use it. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Darrick J. Wong
|
d3906d8f3c |
fuse: enable FUSE_SYNCFS for all fuseblk servers
Turn on syncfs for all fuseblk servers so that the ones in the know can flush cached intermediate data and logs to disk. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Darrick J. Wong
|
0d375a1385 |
fuse: capture the unique id of fuse commands being sent
The fuse_request_{send,end} tracepoints capture the value of
req->in.h.unique in the trace output. It would be really nice if we
could use this to match a request to its response for debugging and
latency analysis, but the call to trace_fuse_request_send occurs before
the unique id has been set:
fuse_request_send: connection 8388608 req 0 opcode 1 (FUSE_LOOKUP) len 107
fuse_request_end: connection 8388608 req 6 len 16 error -2
(Notice that req moves from 0 to 6)
Move the callsites to trace_fuse_request_send to after the unique id has
been set by introducing a helper to do that for standard fuse_req
requests. FUSE_FORGET requests are not covered by this because they
appear to be synthesized into the event stream without a fuse_req
object and are never replied to.
Requests that are aborted without ever having been submitted to the fuse
server retain the behavior that only the fuse_request_end tracepoint
shows up in the trace record, and with req==0.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
||
|
Darrick J. Wong
|
26e5c67deb |
fuse: fix livelock in synchronous file put from fuseblk workers
I observed a hang when running generic/323 against a fuseblk server.
This test opens a file, initiates a lot of AIO writes to that file
descriptor, and closes the file descriptor before the writes complete.
Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for
responses from the fuseblk server:
# cat /proc/372265/task/372313/stack
[<0>] request_wait_answer+0x1fe/0x2a0 [fuse]
[<0>] __fuse_simple_request+0xd3/0x2b0 [fuse]
[<0>] fuse_do_getattr+0xfc/0x1f0 [fuse]
[<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse]
[<0>] aio_read+0x130/0x1e0
[<0>] io_submit_one+0x542/0x860
[<0>] __x64_sys_io_submit+0x98/0x1a0
[<0>] do_syscall_64+0x37/0xf0
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
But the /weird/ part is that the fuseblk server threads are waiting for
responses from itself:
# cat /proc/372210/task/372232/stack
[<0>] request_wait_answer+0x1fe/0x2a0 [fuse]
[<0>] __fuse_simple_request+0xd3/0x2b0 [fuse]
[<0>] fuse_file_put+0x9a/0xd0 [fuse]
[<0>] fuse_release+0x36/0x50 [fuse]
[<0>] __fput+0xec/0x2b0
[<0>] task_work_run+0x55/0x90
[<0>] syscall_exit_to_user_mode+0xe9/0x100
[<0>] do_syscall_64+0x43/0xf0
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
The fuseblk server is fuse2fs so there's nothing all that exciting in
the server itself. So why is the fuse server calling fuse_file_put?
The commit message for the fstest sheds some light on that:
"By closing the file descriptor before calling io_destroy, you pretty
much guarantee that the last put on the ioctx will be done in interrupt
context (during I/O completion).
Aha. AIO fgets a new struct file from the fd when it queues the ioctx.
The completion of the FUSE_WRITE command from userspace causes the fuse
server to call the AIO completion function. The completion puts the
struct file, queuing a delayed fput to the fuse server task. When the
fuse server task returns to userspace, it has to run the delayed fput,
which in the case of a fuseblk server, it does synchronously.
Sending the FUSE_RELEASE command sychronously from fuse server threads
is a bad idea because a client program can initiate enough simultaneous
AIOs such that all the fuse server threads end up in delayed_fput, and
now there aren't any threads left to handle the queued fuse commands.
Fix this by only using asynchronous fputs when closing files, and leave
a comment explaining why.
Cc: stable@vger.kernel.org # v2.6.38
Fixes:
|
||
 Caleb Sander Mateos
|
ef9f603fd3 |
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
Commit
|
||
 Marco Crivellari
|
4ef64db060 |
fs: replace use of system_wq with system_percpu_wq
Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. system_wq is a per-CPU worqueue, yet nothing in its name tells about that CPU affinity constraint, which is very often not required by users. Make it clear by adding a system_percpu_wq to all the fs subsystem. The old wq will be kept for a few release cylces. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Link: https://lore.kernel.org/20250916082906.77439-3-marco.crivellari@suse.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
 Al Viro
|
1d7b343785 |
simplify fuse_atomic_open()
Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
 Mateusz Guzik
|
f99b391778 |
fs: rename generic_delete_inode() and generic_drop_inode()
generic_delete_inode() is rather misleading for what the routine is doing. inode_just_drop() should be much clearer. The new naming is inconsistent with generic_drop_inode(), so rename that one as well with inode_ as the suffix. No functional changes. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
 Matthew Wilcox (Oracle)
|
53fbef56e0 |
mm: introduce memdesc_flags_t
Patch series "Add and use memdesc_flags_t". At some point struct page will be separated from struct slab and struct folio. This is a step towards that by introducing a type for the 'flags' word of all three structures. This gives us a certain amount of type safety by establishing that some of these unsigned longs are different from other unsigned longs in that they contain things like node ID, section number and zone number in the upper bits. That lets us have functions that can be easily called by anyone who has a slab, folio or page (but not easily by anyone else) to get the node or zone. There's going to be some unusual merge problems with this as some odd bits of the kernel decide they want to print out the flags value or something similar by writing page->flags and now they'll need to write page->flags.f instead. That's most of the churn here. Maybe we should be removing these things from the debug output? This patch (of 11): Wrap the unsigned long flags in a typedef. In upcoming patches, this will provide a strong hint that you can't just pass a random unsigned long to functions which take this as an argument. [willy@infradead.org: s/flags/flags.f/ in several architectures] Link: https://lkml.kernel.org/r/aKMgPRLD-WnkPxYm@casper.infradead.org [nicola.vetrini@gmail.com: mips: fix compilation error] Link: https://lore.kernel.org/lkml/CA+G9fYvkpmqGr6wjBNHY=dRp71PLCoi2341JxOudi60yqaeUdg@mail.gmail.com/ Link: https://lkml.kernel.org/r/20250825214245.1838158-1-nicola.vetrini@gmail.com Link: https://lkml.kernel.org/r/20250805172307.1302730-1-willy@infradead.org Link: https://lkml.kernel.org/r/20250805172307.1302730-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Zi Yan <ziy@nvidia.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
 Haiyue Wang
|
e1bf212d06 |
fuse: virtio_fs: fix page fault for DAX page address
The commit |
||
 Miklos Szeredi
|
3f29d59e92 |
fuse: add prune notification
Some fuse servers need to prune their caches, which can only be done if the
kernel's own dentry/inode caches are pruned first to avoid dangling
references.
Add FUSE_NOTIFY_PRUNE, which takes an array of node ID's to try and get rid
of. Inodes with active references are skipped.
A similar functionality is already provided by FUSE_NOTIFY_INVAL_ENTRY with
the FUSE_EXPIRE_ONLY flag. Differences in the interface are
FUSE_NOTIFY_INVAL_ENTRY:
- can only prune one dentry
- dentry is determined by parent ID and name
- if inode has multiple aliases (cached hard links), then they would have
to be invalidated individually to be able to get rid of the inode
FUSE_NOTIFY_PRUNE:
- can prune multiple inodes
- inodes determined by their node ID
- aliases are taken care of automatically
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
||
|
Miklos Szeredi
|
60e1579a0d |
fuse: remove redundant calls to fuse_copy_finish() in fuse_notify()
Remove tail calls of fuse_copy_finish(), since it's now done from fuse_dev_do_write(). No functional change. Reviewed-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Miklos Szeredi
|
0b563aad1c |
fuse: fix possibly missing fuse_copy_finish() call in fuse_notify()
In case of FUSE_NOTIFY_RESEND and FUSE_NOTIFY_INC_EPOCH fuse_copy_finish() isn't called. Fix by always calling fuse_copy_finish() after fuse_notify(). It's a no-op if called a second time. Fixes: |
||
 Joanne Koong
|
02d47e213d |
fuse: remove fuse_readpages_end() null mapping check
Remove extra logic in fuse_readpages_end() that checks against null folio mappings. This was added in commit |
||
|
Miklos Szeredi
|
b3c7ab1d25 |
fuse: fix references to fuse.rst -> fuse/fuse.rst
Commit |
||
|
Miklos Szeredi
|
dfb84c3307 |
fuse: allow synchronous FUSE_INIT
FUSE_INIT has always been asynchronous with mount. That means that the server processed this request after the mount syscall returned. This means that FUSE_INIT can't supply the root inode's ID, hence it currently has a hardcoded value. There are other limitations such as not being able to perform getxattr during mount, which is needed by selinux. To remove these limitations allow server to process FUSE_INIT while initializing the in-core super block for the fuse filesystem. This can only be done if the server is prepared to handle this, so add FUSE_DEV_IOC_SYNC_INIT ioctl, which a) lets the server know whether this feature is supported, returning ENOTTY othewrwise. b) lets the kernel know to perform a synchronous initialization The implementation is slightly tricky, since fuse_dev/fuse_conn are set up only during super block creation. This is solved by setting the private data of the fuse device file to a special value ((struct fuse_dev *) 1) and waiting for this to be turned into a proper fuse_dev before commecing with operations on the device file. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Miklos Szeredi
|
3ca1b31118 |
fuse: zero initialize inode private data
This is slightly tricky, since the VFS uses non-zeroing allocation to preserve some fields that are left in a consistent state. Reported-by: Chunsheng Luo <luochunsheng@ustc.edu> Closes: https://lore.kernel.org/all/20250818083224.229-1-luochunsheng@ustc.edu/ Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
 Chunsheng Luo
|
8c14f2086b |
fuse: remove unused 'inode' parameter in fuse_passthrough_open
The 'inode' parameter in fuse_passthrough_open() is never referenced in the function implementation. Signed-off-by: Chunsheng Luo <luochunsheng@ustc.edu> Reviewed-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
 Edward Adam Davis
|
9d81ba6d49 |
fuse: Block access to folio overlimit
syz reported a slab-out-of-bounds Write in fuse_dev_do_write.
When the number of bytes to be retrieved is truncated to the upper limit
by fc->max_pages and there is an offset, the oob is triggered.
Add a loop termination condition to prevent overruns.
Fixes:
|
||
 Li RongQing
|
7dbe644248 |
virtio_fs: fix the hash table using in virtio_fs_enqueue_req()
The original commit
|
||
|
Joanne Koong
|
494d2f5088 |
fuse: use default writeback accounting
commit
|
||
|
Li RongQing
|
b4da63cea1 |
virtio_fs: Remove redundant spinlock in virtio_fs_request_complete()
Since clear_bit is an atomic operation, the spinlock is redundant and can be removed, reducing lock contention is good for performance. Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Joanne Koong
|
6fd26f5085 |
fuse: remove unneeded offset assignment when filling write pages
With the change in aee03ea7ff98 ("fuse: support large folios for
writethrough writes"), this old line for setting ap->descs[0].offset is
now obsolete and unneeded. This should have been removed as part of
aee03ea7ff98.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes: aee03ea7ff98 ("fuse: support large folios for writethrough writes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
||
 Sergey Senozhatsky
|
14cbb72d75 |
fuse: use freezable wait in fuse_get_req()
Use freezable wait in fuse_get_req() so that it won't block the system from entering suspend: Freezing user space processes failed after 20.009 seconds Call trace: __switch_to+0xcc/0x168 schedule+0x57c/0x1138 fuse_get_req+0xd0/0x2b0 fuse_simple_request+0x120/0x620 fuse_getxattr+0xe4/0x158 fuse_xattr_get+0x2c/0x48 __vfs_getxattr+0x160/0x1d8 get_vfs_caps_from_disk+0x74/0x1a8 __audit_inode+0x244/0x4d8 user_path_at_empty+0x2e0/0x390 __arm64_sys_faccessat+0xdc/0x260 Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Miklos Szeredi
|
7a37f55af7 |
fuse: add COPY_FILE_RANGE_64 that allows large copies
The FUSE protocol uses struct fuse_write_out to convey the return value of copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE interface supports a 64-bit size copies and there's no reason why copies should be limited to 32-bit. Introduce a new op COPY_FILE_RANGE_64, which is identical, except the number of bytes copied is returned in a 64-bit value. If the fuse server does not support COPY_FILE_RANGE_64, fall back to COPY_FILE_RANGE. Reported-by: Florian Weimer <fweimer@redhat.com> Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/ Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Joanne Koong
|
bd24d2108e |
fuse: fix fuseblk i_blkbits for iomap partial writes
On regular fuse filesystems, i_blkbits is set to PAGE_SHIFT which means
any iomap partial writes will mark the entire folio as uptodate. However
fuseblk filesystems work differently and allow the blocksize to be less
than the page size. As such, this may lead to data corruption if fuseblk
sets its blocksize to less than the page size, uses the writeback cache,
and does a partial write, then a read and the read happens before the
write has undergone writeback, since the folio will not be marked
uptodate from the partial write so the read will read in the entire
folio from disk, which will overwrite the partial write.
The long-term solution for this, which will also be needed for fuse to
enable large folios with the writeback cache on, is to have fuse also
use iomap for folio reads, but until that is done, the cleanest
workaround is to use the page size for fuseblk's internal kernel inode
blksize/blkbits values while maintaining current behavior for stat().
This was verified using ntfs-3g:
$ sudo mkfs.ntfs -f -c 512 /dev/vdd1
$ sudo ntfs-3g /dev/vdd1 ~/fuseblk
$ stat ~/fuseblk/hi.txt
IO Block: 512
Fixes:
|
||
|
Joanne Koong
|
7956994650 |
fuse: reflect cached blocksize if blocksize was changed
As pointed out by Miklos[1], in the fuse_update_get_attr() path, the
attributes returned to stat may be cached values instead of fresh ones
fetched from the server. In the case where the server returned a
modified blocksize value, we need to cache it and reflect it back to
stat if values are not re-fetched since we now no longer directly change
inode->i_blkbits.
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguCOxeVX88_zPd1hqziB_C+tmfuDhZP5qO2nKmnb-dTUA@mail.gmail.com/ [1]
Fixes:
|
||
|
Miklos Szeredi
|
1e08938c36 |
fuse: prevent overflow in copy_file_range return value
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies.
Currently the number of bytes copied is silently truncated to 32-bit, which
may result in poor performance or even failure to copy in case of
truncation to zero.
Reported-by: Florian Weimer <fweimer@redhat.com>
Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/
Fixes:
|
||
|
Miklos Szeredi
|
e5203209b3 |
fuse: check if copy_file_range() returns larger than requested size
Just like write(), copy_file_range() should check if the return value is
less or equal to the requested number of bytes.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250807062425.694-1-luochunsheng@ustc.edu/
Fixes:
|
||
 Amir Goldstein
|
e9c8da670e |
fuse: do not allow mapping a non-regular backing file
We do not support passthrough operations other than read/write on
regular file, so allowing non-regular backing files makes no sense.
Fixes:
|
||
|
Joanne Koong
|
542ede096e |
fuse: keep inode->i_blkbits constant
With fuse now using iomap for writeback handling, inode blkbits changes
are problematic because iomap relies on inode->i_blkbits for its
internal bitmap logic. Currently we change inode->i_blkbits in fuse to
match the attr->blksize value passed in by the server.
This commit keeps inode->i_blkbits constant in fuse. Any attr->blksize
values passed in by the server will not update inode->i_blkbits. The
client-side behavior for stat is unaffected, stat will still reflect the
blocksize passed in by the server.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/20250807175015.515192-1-joannelkoong@gmail.com
Fixes:
|
||
|
Linus Torvalds
|
beace86e61 |
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
||
|
Linus Torvalds
|
6e11664f14 |
Merge tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
||
|
Joanne Koong
|
595d7ebeaf |
fuse: remove page alignment check for writeback len
Remove incorrect page alignment check for the writeback len arg in
fuse_iomap_writeback_range(). len will always be block-aligned as
passed in by iomap.
On regular fuse filesystems, i_blkbits is set to PAGE_SHIFT so this is
not a problem but for fuseblk filesystems, the block size is set to a
default of 512 bytes or a block size passed in at mount time.
Please note that non-page-aligned lengths are fine for the logic in
fuse_iomap_writeback_range(). The check was originally added as a
safeguard to detect conspicuously wrong ranges.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes:
|
||
|
Linus Torvalds
|
b5d760d53a |
Merge tag 'vfs-6.17-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iomap updates from Christian Brauner: - Refactor the iomap writeback code and split the generic and ioend/bio based writeback code. There are two methods that define the split between the generic writeback code, and the implemementation of it, and all knowledge of ioends and bios now sits below that layer. - Add fuse iomap support for buffered writes and dirty folio writeback. This is needed so that granular uptodate and dirty tracking can be used in fuse when large folios are enabled. This has two big advantages. For writes, instead of the entire folio needing to be read into the page cache, only the relevant portions need to be. For writeback, only the dirty portions need to be written back instead of the entire folio. * tag 'vfs-6.17-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fuse: refactor writeback to use iomap_writepage_ctx inode fuse: hook into iomap for invalidating and checking partial uptodateness fuse: use iomap for folio laundering fuse: use iomap for writeback fuse: use iomap for buffered writes iomap: build the writeback code without CONFIG_BLOCK iomap: add read_folio_range() handler for buffered writes iomap: improve argument passing to iomap_read_folio_sync iomap: replace iomap_folio_ops with iomap_write_ops iomap: export iomap_writeback_folio iomap: move folio_unlock out of iomap_writeback_folio iomap: rename iomap_writepage_map to iomap_writeback_folio iomap: move all ioend handling to ioend.c iomap: add public helpers for uptodate state manipulation iomap: hide ioends from the generic writeback code iomap: refactor the writeback interface iomap: cleanup the pending writeback tracking in iomap_writepage_map_blocks iomap: pass more arguments using the iomap writeback context iomap: header diet |
||
|
Linus Torvalds
|
57fcb7d930 |
Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fileattr updates from Christian Brauner: "This introduces the new file_getattr() and file_setattr() system calls after lengthy discussions. Both system calls serve as successors and extensible companions to the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have started to show their age in addition to being named in a way that makes it easy to conflate them with extended attribute related operations. These syscalls allow userspace to set filesystem inode attributes on special files. One of the usage examples is the XFS quota projects. XFS has project quotas which could be attached to a directory. All new inodes in these directories inherit project ID set on parent directory. The project is created from userspace by opening and calling FS_IOC_FSSETXATTR on each inode. This is not possible for special files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left with empty project ID. Those inodes then are not shown in the quota accounting but still exist in the directory. This is not critical but in the case when special files are created in the directory with already existing project quota, these new inodes inherit extended attributes. This creates a mix of special files with and without attributes. Moreover, special files with attributes don't have a possibility to become clear or change the attributes. This, in turn, prevents userspace from re-creating quota project on these existing files. In addition, these new system calls allow the implementation of additional attributes that we couldn't or didn't want to fit into the legacy ioctls anymore" * tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: tighten a sanity check in file_attr_to_fileattr() tree-wide: s/struct fileattr/struct file_kattr/g fs: introduce file_getattr and file_setattr syscalls fs: prepare for extending file_get/setattr() fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP selinux: implement inode_file_[g|s]etattr hooks lsm: introduce new hooks for setting/getting inode fsxattr fs: split fileattr related helpers into separate file |
||
|
Linus Torvalds
|
7879d7aff0 |
Merge tag 'vfs-6.17-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc VFS updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add ext4 IOCB_DONTCACHE support
This refactors the address_space_operations write_begin() and
write_end() callbacks to take const struct kiocb * as their first
argument, allowing IOCB flags such as IOCB_DONTCACHE to propagate
to the filesystem's buffered I/O path.
Ext4 is updated to implement handling of the IOCB_DONTCACHE flag
and advertises support via the FOP_DONTCACHE file operation flag.
Additionally, the i915 driver's shmem write paths are updated to
bypass the legacy write_begin/write_end interface in favor of
directly calling write_iter() with a constructed synchronous kiocb.
Another i915 change replaces a manual write loop with
kernel_write() during GEM shmem object creation.
Cleanups:
- don't duplicate vfs_open() in kernel_file_open()
- proc_fd_getattr(): don't bother with S_ISDIR() check
- fs/ecryptfs: replace snprintf with sysfs_emit in show function
- vfs: Remove unnecessary list_for_each_entry_safe() from
evict_inodes()
- filelock: add new locks_wake_up_waiter() helper
- fs: Remove three arguments from block_write_end()
- VFS: change old_dir and new_dir in struct renamedata to dentrys
- netfs: Remove unused declaration netfs_queue_write_request()
Fixes:
- eventpoll: Fix semi-unbounded recursion
- eventpoll: fix sphinx documentation build warning
- fs/read_write: Fix spelling typo
- fs: annotate data race between poll_schedule_timeout() and
pollwake()
- fs/pipe: set FMODE_NOWAIT in create_pipe_files()
- docs/vfs: update references to i_mutex to i_rwsem
- fs/buffer: remove comment about hard sectorsize
- fs/buffer: remove the min and max limit checks in __getblk_slow()
- fs/libfs: don't assume blocksize <= PAGE_SIZE in
generic_check_addressable
- fs_context: fix parameter name in infofc() macro
- fs: Prevent file descriptor table allocations exceeding INT_MAX"
* tag 'vfs-6.17-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
netfs: Remove unused declaration netfs_queue_write_request()
eventpoll: fix sphinx documentation build warning
ext4: support uncached buffered I/O
mm/pagemap: add write_begin_get_folio() helper function
fs: change write_begin/write_end interface to take struct kiocb *
drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter
drm/i915: Use kernel_write() in shmem object create
eventpoll: Fix semi-unbounded recursion
vfs: Remove unnecessary list_for_each_entry_safe() from evict_inodes()
fs/libfs: don't assume blocksize <= PAGE_SIZE in generic_check_addressable
fs/buffer: remove the min and max limit checks in __getblk_slow()
fs: Prevent file descriptor table allocations exceeding INT_MAX
fs: Remove three arguments from block_write_end()
fs/ecryptfs: replace snprintf with sysfs_emit in show function
fs: annotate suspected data race between poll_schedule_timeout() and pollwake()
docs/vfs: update references to i_mutex to i_rwsem
fs/buffer: remove comment about hard sectorsize
fs_context: fix parameter name in infofc() macro
VFS: change old_dir and new_dir in struct renamedata to dentrys
proc_fd_getattr(): don't bother with S_ISDIR() check
...
|
||
|
Linus Torvalds
|
1959e18cc0 |
Merge tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull simple_recursive_removal() update from Al Viro: "Removing subtrees of kernel filesystems is done in quite a few places; unfortunately, it's easy to get wrong. A number of open-coded attempts are out there, with varying amount of bogosities. simple_recursive_removal() had been introduced for doing that with all precautions needed; it does an equivalent of rm -rf, with sufficient locking, eviction of anything mounted on top of the subtree, etc. This series converts a bunch of open-coded instances to using that" * tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: functionfs, gadgetfs: use simple_recursive_removal() kill binderfs_remove_file() fuse_ctl: use simple_recursive_removal() pstore: switch to locked_recursive_removal() binfmt_misc: switch to locked_recursive_removal() spufs: switch to locked_recursive_removal() add locked_recursive_removal() better lockdep annotations for simple_recursive_removal() simple_recursive_removal(): saner interaction with fsnotify |
||
|
Linus Torvalds
|
11fe69fbd5 |
Merge tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dentry d_flags updates from Al Viro:
"The current exclusion rules for dentry->d_flags stores are rather
unpleasant. The basic rules are simple:
- stores to dentry->d_flags are OK under dentry->d_lock
- stores to dentry->d_flags are OK in the dentry constructor, before
becomes potentially visible to other threads
Unfortunately, there's a couple of exceptions to that, and that's
where the headache comes from.
The main PITA comes from d_set_d_op(); that primitive sets ->d_op of
dentry and adjusts the flags that correspond to presence of individual
methods. It's very easy to misuse; existing uses _are_ safe, but proof
of correctness is brittle.
Use in __d_alloc() is safe (we are within a constructor), but we might
as well precalculate the initial value of 'd_flags' when we set the
default ->d_op for given superblock and set 'd_flags' directly instead
of messing with that helper.
The reasons why other uses are safe are bloody convoluted; I'm not
going to reproduce it here. See [1] for gory details, if you care. The
critical part is using d_set_d_op() only just prior to
d_splice_alias(), which makes a combination of d_splice_alias() with
setting ->d_op, etc a natural replacement primitive.
Better yet, if we go that way, it's easy to take setting ->d_op and
modifying 'd_flags' under ->d_lock, which eliminates the headache as
far as 'd_flags' exclusion rules are concerned. Other exceptions are
minor and easy to deal with.
What this series does:
- d_set_d_op() is no longer available; instead a new primitive
(d_splice_alias_ops()) is provided, equivalent to combination of
d_set_d_op() and d_splice_alias().
- new field of struct super_block - 's_d_flags'. This sets the
default value of 'd_flags' to be used when allocating dentries on
this filesystem.
- new primitive for setting 's_d_op': set_default_d_op(). This
replaces stores to 's_d_op' at mount time.
All in-tree filesystems converted; out-of-tree ones will get caught
by the compiler ('s_d_op' is renamed, so stores to it will be
caught). 's_d_flags' is set by the same primitive to match the
's_d_op'.
- a lot of filesystems had sb->s_d_op->d_delete equal to
always_delete_dentry; that is equivalent to setting
DCACHE_DONTCACHE in 'd_flags', so such filesystems can bloody well
set that bit in 's_d_flags' and drop 'd_delete()' from
dentry_operations.
In quite a few cases that results in empty dentry_operations, which
means that we can get rid of those.
- kill simple_dentry_operations - not needed anymore
- massage d_alloc_parallel() to get rid of the other exception wrt
'd_flags' stores - we can set DCACHE_PAR_LOOKUP as soon as we
allocate the new dentry; no need to delay that until we commit to
using the sucker.
As the result, 'd_flags' stores are all either under ->d_lock or done
before the dentry becomes visible in any shared data structures"
Link: https://lore.kernel.org/all/20250224010624.GT1977892@ZenIV/ [1]
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits)
configfs: use DCACHE_DONTCACHE
debugfs: use DCACHE_DONTCACHE
efivarfs: use DCACHE_DONTCACHE instead of always_delete_dentry()
9p: don't bother with always_delete_dentry
ramfs, hugetlbfs, mqueue: set DCACHE_DONTCACHE
kill simple_dentry_operations
devpts, sunrpc, hostfs: don't bother with ->d_op
shmem: no dentry retention past the refcount reaching zero
d_alloc_parallel(): set DCACHE_PAR_LOOKUP earlier
make d_set_d_op() static
simple_lookup(): just set DCACHE_DONTCACHE
tracefs: Add d_delete to remove negative dentries
set_default_d_op(): calculate the matching value for ->d_flags
correct the set of flags forbidden at d_set_d_op() time
split d_flags calculation out of d_set_d_op()
new helper: set_default_d_op()
fuse: no need for special dentry_operations for root dentry
switch procfs from d_set_d_op() to d_splice_alias_ops()
new helper: d_splice_alias_ops()
procfs: kill ->proc_dops
...
|
||
|
Joanne Koong
|
6e2f4d8a61 |
fuse: refactor writeback to use iomap_writepage_ctx inode
struct iomap_writepage_ctx includes a pointer to the file inode. In writeback, use that instead of also passing the inode into fuse_fill_wb_data. No functional changes. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/20250715202122.2282532-6-joannelkoong@gmail.com Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Joanne Koong
|
707c5d3471 |
fuse: hook into iomap for invalidating and checking partial uptodateness
Hook into iomap_invalidate_folio() so that if the entire folio is being invalidated during truncation, the dirty state is cleared and the folio doesn't get written back. As well the folio's corresponding ifs struct will get freed. Hook into iomap_is_partially_uptodate() since iomap tracks uptodateness granularly when it does buffered writes. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/20250715202122.2282532-5-joannelkoong@gmail.com Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Joanne Koong
|
1097a87dcb |
fuse: use iomap for folio laundering
Use iomap for folio laundering, which will do granular dirty writeback when laundering a large folio. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/20250715202122.2282532-4-joannelkoong@gmail.com Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |