Accessing the transmit queue without owning the msk socket lock is
inherently racy, hence __mptcp_check_push() could actually quit early
even when there is pending data.
That in turn could cause unexpected tx lock and timeout.
Dropping the early check avoids the race, implicitly relaying on later
tests under the relevant lock. With such change, all the other
mptcp_send_head() call sites are now under the msk socket lock and we
can additionally drop the now unneeded annotation on the transmit head
pointer accesses.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-1-38ffff5a9ec8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The update_userdata() function constructs the complete userdata string
in nt->extradata_complete and updates nt->userdata_length. This data
is then read by write_msg() and write_ext_msg() when sending netconsole
messages. However, update_userdata() was not holding target_list_lock
during this process, allowing concurrent message transmission to read
partially updated userdata.
This race condition could result in netconsole messages containing
incomplete or inconsistent userdata - for example, reading the old
userdata_length with new extradata_complete content, or vice versa,
leading to truncated or corrupted output.
Fix this by acquiring target_list_lock with spin_lock_irqsave() before
updating extradata_complete and userdata_length, and releasing it after
both fields are fully updated. This ensures that readers see a
consistent view of the userdata, preventing corruption during concurrent
access.
The fix aligns with the existing locking pattern used throughout the
netconsole code, where target_list_lock protects access to target
fields including buf[] and msgcounter that are accessed during message
transmission.
Also get rid of the unnecessary variable complete_idx, which makes it
easier to bail out of update_userdata().
Fixes: df03f830d0 ("net: netconsole: cache userdata formatted string in netconsole_target")
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20251028-netconsole-fix-race-v4-1-63560b0ae1a0@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
tcp: fix receive autotune again
Neal Cardwell found that recent kernels were having RWIN limited
issues, even when net.ipv4.tcp_rmem[2] was set to a very big value like
512MB.
He suspected that tcp_stream default buffer size (64KB) was triggering
heuristic added in ea33537d82 ("tcp: add receive queue awareness
in tcp_rcv_space_adjust()").
After more testing, it turns out the bug was added earlier
with commit 65c5287892 ("tcp: fix sk_rcvbuf overshoot").
I forgot once again that DRS has one RTT latency.
MPTCP also got the same issue.
This series :
- Prevents calling tcp_rcvbuf_grow() on some MPTCP subflows.
- adds rcv_ssthresh, window_clamp and rcv_wnd to trace_tcp_rcvbuf_grow().
- Refactors code in a patch with no functional changes.
- Fixes the issue in the final patch.
====================
Link: https://patch.msgid.link/20251028-net-tcp-recv-autotune-v3-0-74b43ba4c84c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-10-28 (ice, ixgbe, igb, igc)
For ice, Grzegorz fixes setting of PHY lane number and logical PF ID for
E82x devices. He also corrects access of CGU (Clock Generation Unit) on
dual complex devices.
Kohei Enju resolves issues with error path cleanup for probe when in
recovery mode on ixgbe and ensures PHY is powered on for link testing
on igc. Lastly, he converts incorrect use of -ENOTSUPP to -EOPNOTSUPP
on igb, igc, and ixgbe.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: use EOPNOTSUPP instead of ENOTSUPP in ixgbe_ptp_feature_enable()
igc: use EOPNOTSUPP instead of ENOTSUPP in igc_ethtool_get_sset_count()
igb: use EOPNOTSUPP instead of ENOTSUPP in igb_get_sset_count()
igc: power up the PHY before the link test
ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
ice: fix usage of logical PF id
ice: fix destination CGU for dual complex E825
ice: fix lane number calculation
====================
Link: https://patch.msgid.link/20251028202515.675129-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update Rae's email address for the KUnit entry. Also add an entry to
.mailmap to map former google email to current gmail address.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow pm_restrict_gfp_mask() to be called many times in a row to avoid
issues with calling dpm_suspend_start() when the GFP mask has been
already restricted.
Only the first invocation of pm_restrict_gfp_mask() will actually
restrict the GFP mask and the subsequent calls will warn if there is
a mismatch between the expected allowed GFP mask and the actual one.
Moreover, if pm_restrict_gfp_mask() is called many times in a row,
pm_restore_gfp_mask() needs to be called matching number of times in
a row to actually restore the GFP mask. Calling it when the GFP mask
has not been restricted will cause it to warn.
This is necessary for the GFP mask restriction starting in
hibernation_snapshot() to continue throughout the entire hibernation
flow until it completes or it is aborted (either by a wakeup event or
by an error).
Fixes: 449c9c0253 ("PM: hibernate: Restrict GFP mask in hibernation_snapshot()")
Fixes: 469d80a371 ("PM: hibernate: Fix hybrid-sleep")
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/linux-pm/20251025050812.421905-1-safinaskar@gmail.com/
Link: https://lore.kernel.org/linux-pm/20251028111730.2261404-1-safinaskar@gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/5935682.DvuYhMxLoT@rafael.j.wysocki
When the driver supports DMA, it enqueues four DMA descriptors per
substream before the substream is started. New descriptors are enqueued in
the DMA completion callback, and each time a new descriptor is queued, the
dma_buffer_pos is incremented.
During suspend, the DMA transactions are terminated. There might be cases
where the four extra enqueued DMA descriptors are not completed and are
instead canceled on suspend. However, the cancel operation does not take
into account that the dma_buffer_pos was already incremented.
Previously, the suspend code reinitialized dma_buffer_pos to zero, but this
is not always correct.
To avoid losing any audio periods during suspend/resume and to prevent
clip sound, save the completed DMA buffer position in the DMA callback and
reinitialize dma_buffer_pos on resume.
Cc: stable@vger.kernel.org
Fixes: 1fc778f7c8 ("ASoC: renesas: rz-ssi: Add suspend to RAM support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251029141134.2556926-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sequence adjustment may be required for FTP traffic with PASV/EPSV modes.
due to need to re-write packet payload (IP, port) on the ftp control
connection. This can require changes to the TCP length and expected
seq / ack_seq.
The easiest way to reproduce this issue is with PASV mode.
Example ruleset:
table inet ftp_nat {
ct helper ftp_helper {
type "ftp" protocol tcp
l3proto inet
}
chain prerouting {
type filter hook prerouting priority 0; policy accept;
tcp dport 21 ct state new ct helper set "ftp_helper"
}
}
table ip nat {
chain prerouting {
type nat hook prerouting priority -100; policy accept;
tcp dport 21 dnat ip prefix to ip daddr map {
192.168.100.1 : 192.168.13.2/32 }
}
chain postrouting {
type nat hook postrouting priority 100 ; policy accept;
tcp sport 21 snat ip prefix to ip saddr map {
192.168.13.2 : 192.168.100.1/32 }
}
}
Note that the ftp helper gets assigned *after* the dnat setup.
The inverse (nat after helper assign) is handled by an existing
check in nf_nat_setup_info() and will not show the problem.
Topoloy:
+-------------------+ +----------------------------------+
| FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 |
+-------------------+ +----------------------------------+
|
+-----------------------+
| Client: 192.168.100.2 |
+-----------------------+
ftp nat changes do not work as expected in this case:
Connected to 192.168.100.1.
[..]
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> ls
227 Entering passive mode (192,168,100,1,209,129).
421 Service not available, remote server has closed connection.
Kernel logs:
Missing nfct_seqadj_ext_add() setup call
WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41
[..]
__nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]
nf_nat_ftp+0x142/0x280 [nf_nat_ftp]
help+0x4d1/0x880 [nf_conntrack_ftp]
nf_confirm+0x122/0x2e0 [nf_conntrack]
nf_hook_slow+0x3c/0xb0
..
Fix this by adding the required extension when a conntrack helper is assigned
to a connection that has a nat binding.
Fixes: 1a64edf54f ("netfilter: nft_ct: add helper set support")
Signed-off-by: Andrii Melnychenko <a.melnychenko@vyos.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_connlimit_eval() reads priv->list->count to check if the connection
limit has been exceeded. This value is being read without a lock and can
be modified by a different process. Use READ_ONCE() for correctness.
Fixes: df4a902509 ("netfilter: nf_conncount: merge lookup and add functions")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
conntrack labels can only be set when the conntrack has been created
with the "ctlabel" extension.
For older iptables (connlabel match), adding an "-m connlabel" rule
turns on the ctlabel extension allocation for all future conntrack
entries.
For nftables, its only enabled for 'ct label set foo', but not for
'ct label foo' (i.e. check).
But users could have a ruleset that only checks for presence, and rely
on userspace to set a label bit via ctnetlink infrastructure.
This doesn't work without adding a dummy 'ct label set' rule.
We could also enable extension infra for the first (failing) ctnetlink
request, but unlike ruleset we would not be able to disable the
extension again.
Therefore turn on ctlabel extension allocation if an nftables ruleset
checks for a connlabel too.
Fixes: 1ad8f48df6 ("netfilter: nftables: add connlabel set support")
Reported-by: Antonio Ojea <aojea@google.com>
Closes: https://lore.kernel.org/netfilter-devel/aPi_VdZpVjWujZ29@strlen.de/
Signed-off-by: Florian Westphal <fw@strlen.de>
The function has a memory leak when kvrealloc() fails.
The function directly assigns NULL to the markers pointer, losing the
reference to the previously allocated memory. This causes kvfree() in
pt_dump_init() to free NULL instead of the leaked memory.
Fix by:
1. Using kvrealloc() uniformly for all allocations
2. Using a temporary variable to preserve the original pointer until
allocation succeeds
3. Removing the error path that sets markers_cnt=0 to keep
consistency between markers and markers_cnt
Found via static analysis and this is similar to commit 42378a9ca5
("bpf, verifier: Fix memory leak in array reallocation for stack state")
Fixes: d0e7915d2a ("s390/mm/ptdump: Generate address marker array dynamically")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When running "perf mem record" command on CWF, the below KASAN
global-out-of-bounds warning is seen.
==================================================================
BUG: KASAN: global-out-of-bounds in cmt_latency_data+0x176/0x1b0
Read of size 4 at addr ffffffffb721d000 by task dtlb/9850
Call Trace:
kasan_report+0xb8/0xf0
cmt_latency_data+0x176/0x1b0
setup_arch_pebs_sample_data+0xf49/0x2560
intel_pmu_drain_arch_pebs+0x577/0xb00
handle_pmi_common+0x6c4/0xc80
The issue is caused by below code in __grt_latency_data(). The code
tries to access x86_hybrid_pmu structure which doesn't exist on
non-hybrid platform like CWF.
WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big)
So add is_hybrid() check before calling this WARN_ON_ONCE to fix the
global-out-of-bounds access issue.
Fixes: 090262439f ("perf/x86/intel: Rename model-specific pebs_latency_data functions")
Reported-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251028064214.1451968-1-dapeng1.mi@linux.intel.com
Jijie Shao says:
====================
bug fixes for the hibmcge ethernet driver
This patch set is intended to fix several issues for hibmcge driver:
1. Patch1 fixes the issue where buf avl irq is disabled after irq_handle.
2. Patch2 eliminates the error logs in scenarios without phy.
3. Patch3 fixes the issue where the network port becomes unusable
after a PCIe RAS event.
====================
Link: https://patch.msgid.link/20251025014642.265259-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
current, driver will call netif_device_detach() in
pci_error_handlers.error_detected() and do reset in
pci_error_handlers.slot_reset().
However, if pci_error_handlers.slot_reset() is not called
after pci_error_handlers.error_detected(),
driver will be detached and unable to recover.
drivers/pci/pcie/err.c/report_error_detected() says:
If any device in the subtree does not have an error_detected
callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
error callbacks of any device in the subtree, and will
exit in the disconnected error state.
Therefore, when the hibmcge device and other devices that do not
support the error_detected callback are under the same subtree,
hibmcge will be unable to do slot_reset even for non-fatal errors.
This path move netif_device_detach() from error_detected() to slot_reset(),
ensuring that detach and reset are always executed together.
Fixes: fd394a334b ("net: hibmcge: Add support for abnormal irq handling feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20251025014642.265259-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hibmcge driver uses fixed_phy to configure scenarios without PHY,
where the driver is always in a linked state. However,
there might be no link in hardware, so the np_link error
is detected in hbg_hw_adjust_link(), which can cause abnormal logs.
Therefore, in scenarios without a PHY, the driver no longer
checks the np_link status.
Fixes: 1d7cd7a9c6 ("net: hibmcge: support scenario without PHY")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20251025014642.265259-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
irq initialized with the macro HBG_ERR_IRQ_I will automatically
be re-enabled, whereas those initialized with the macro HBG_IRQ_I
will not be re-enabled.
Since the rx buf avl irq is initialized using the macro HBG_IRQ_I,
it needs to be actively re-enabled;
otherwise priv->stats.rx_fifo_less_empty_thrsld_cnt cannot be
correctly incremented.
Fixes: fd394a334b ("net: hibmcge: Add support for abnormal irq handling feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251025014642.265259-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the signal format of an associated output is not considered
during output pin registration. As a result, the driver registers output
pins that are disabled by the signal format configuration.
Fix this by calling zl3073x_output_pin_is_enabled() to check whether
a given output pin should be registered or not.
Fixes: 75a71ecc24 ("dpll: zl3073x: Register DPLL devices and pins")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251027140912.233152-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ch_ipsec_xfrm_add_state() there is not check of try_module_get
return value. It is very unlikely, but try_module_get() could return
false value, which could cause use-after-free error.
Conditions: The module count must be zero, and a module unload in
progress. The thread doing the unload is blocked somewhere.
Another thread makes a callback into the module for some request
that (for instance) would need to create a kernel thread.
It tries to get a reference for the thread.
So try_module_get(THIS_MODULE) is the right call - and will fail here.
This fix adds checking the result of try_module_get call
Fixes: 6dad4e8ab3 ("chcr: Add support for Inline IPSec")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Link: https://patch.msgid.link/20251024161304.724436-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull smb server fixes from Steve French:
- Improve check for malformed payload
- Fix free transport smbdirect potential race
- Fix potential race in credit allocation during smbdirect negotiation
* tag 'v6.18-rc3-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let smb_direct_cm_handler() call ib_drain_qp() after smb_direct_disconnect_rdma_work()
smb: server: call smb_direct_post_recv_credits() when the negotiation is done
ksmbd: transport_ipc: validate payload size before reading handle
The device-id-get and pin-id-get handlers were ignoring errors from
the find functions and sending empty replies instead of returning
error codes to userspace.
When dpll_device_find_from_nlattr() or dpll_pin_find_from_nlattr()
returned an error (e.g., -EINVAL for "multiple matches" or -ENODEV
for "not found"), the handlers checked `if (!IS_ERR(ptr))` and
skipped adding the device/pin handle to the message, but then still
sent the empty message as a successful reply.
This caused userspace tools to receive empty responses with id=0
instead of proper netlink errors with extack messages like
"multiple matches".
The bug is visible via strace, which shows the kernel sending TWO
netlink messages in response to a single request:
1. Empty reply (20 bytes, just header, no attributes):
recvfrom(3, [{nlmsg_len=20, nlmsg_type=dpll, nlmsg_flags=0, ...},
{cmd=0x7, version=1}], ...)
2. NLMSG_ERROR ACK with extack (because of NLM_F_ACK flag):
recvfrom(3, [{nlmsg_len=60, nlmsg_type=NLMSG_ERROR,
nlmsg_flags=NLM_F_CAPPED|NLM_F_ACK_TLVS, ...},
[{error=0, msg={...}},
[{nla_type=NLMSGERR_ATTR_MSG}, "multiple matches"]]], ...)
The C YNL library parses the first message, sees an empty response,
and creates a result object with calloc() which zero-initializes all
fields, resulting in id=0.
The Python YNL library parses both messages and displays the extack
from the second NLMSG_ERROR message.
Fix by checking `if (IS_ERR(ptr))` first and returning the error
code immediately, so that netlink properly sends only NLMSG_ERROR with
the extack message to userspace. After this fix, both C and Python
YNL tools receive only the NLMSG_ERROR and behave consistently.
This affects:
- DPLL_CMD_DEVICE_ID_GET: now properly returns error when multiple
devices match the criteria (e.g., same module-name + clock-id)
- DPLL_CMD_PIN_ID_GET: now properly returns error when multiple pins
match the criteria (e.g., same module-name)
Before fix:
$ dpll pin id-get module-name ice
0 (wrong - should be error, there are 17 pins with module-name "ice")
After fix:
$ dpll pin id-get module-name ice
Error: multiple matches
(correct - kernel reports the ambiguity via extack)
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251024190733.364101-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dpu_plane_virtual_assign_resources function might fail if there is
no suitable SSPP(s) for the plane. This leaves sspp field in plane
state uninitialized and later leads to NULL dereference during commit:
Call trace:
_dpu_crtc_blend_setup+0x194/0x620 [msm] (P)
dpu_crtc_atomic_begin+0xe4/0x240 [msm]
drm_atomic_helper_commit_planes+0x88/0x358
msm_atomic_commit_tail+0x1b4/0x8b8 [msm]
commit_tail+0xa8/0x1b0
drm_atomic_helper_commit+0x180/0x1a0
drm_atomic_commit+0x94/0xe0
drm_mode_atomic_ioctl+0xa88/0xd60
drm_ioctl_kernel+0xc4/0x138
drm_ioctl+0x364/0x4f0
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x48/0x100
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x30/0xe0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
Fixes: 3ed12a3664 ("drm/msm/dpu: allow sharing SSPP between planes")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/681916/
Link: https://lore.kernel.org/r/20251017-b4-dpu-fixes-v1-2-40ce5993eeb6@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When in bonded DSI mode, only one PLL in one DSI PHY is used for both
DSI PHYs, meaning that parents of the secondary DSI PHY will use the
primary DSI PHY PLL as parent.
In this case the primary DSI PHY PLL will be set even if the primary
DSI PHY is not yet enabled. The DSI PHY code has support for this
particular use-case and will handle the fact the PLL was already
set when initializing the primary DSI PHY.
By introducing a protected variable pll_enable_cnt in the commit
cb55f39bf7 ("drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared"),
this variable is only initially set to 1 when the DSI PHY is initialized
making it impossible to set the PLL before, breaking the bonded DSI
use case by returning 0 when setting the PLL from the secondary DSI
PHY driver and skipping the correct clocks initialization.
But since it was already possible to set the PLL without enabling
the DSI PHY, just drop the pll_enable_cnt setting from the PHY
enable/disable and simply increment/decrement the pll_enable_cnt
variable from the dsi_pll_enable/disable_pll_bias to make sure any
PLL operation is done with the PLL BIAS enabled.
Fixes: cb55f39bf7 ("drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared")
Closes: https://lore.kernel.org/all/50a49d72-2b1e-471d-b0c4-d5a0b38b2a21@linaro.org/
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/683688/
Link: https://lore.kernel.org/r/20251027-topic-sm8x50-fix-dsi-bonded-v1-1-a477cd3f907d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Actually check the return value from pll_ops->init_pll()
as it can return an error.
If the card's BIOS didn't run because it's not the primary VGA card
the fact that the xclk source is unsupported is printed as shown
below but the driver continues on regardless and on my machine causes
a hard lock up.
[ 61.470088] atyfb 0000:03:05.0: enabling device (0080 -> 0083)
[ 61.476191] atyfb: using auxiliary register aperture
[ 61.481239] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
[ 61.487569] atyfb: 512K SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
[ 61.496112] atyfb: Unsupported xclk source: 5.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL.
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Commit e24cca19ba ("sh: Kill off MAX_DMA_ADDRESS leftovers.") removed
the define ONCHIP_NR_DMA_CHANNELS. So that the leftover reference needs
to be replaced by CONFIG_NR_ONCHIP_DMA_CHANNELS to compile successfully
with CONFIG_PVR2_DMA enabled.
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
The of_find_node_by_name() function returns a device tree node with its
reference count incremented. The caller is responsible for calling
of_node_put() to release this reference when done.
Found via static analysis.
Fixes: cc5d0189b9 ("[PATCH] powerpc: Remove device_node addrs/n_addr")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Paolo Abeni
Gustavo Luiz Duarte
Bagas Sanjaya
Abdun Nihaal
Jakub Kicinski
Eric Dumazet
Rae Moar
Sebastian Fleer
Sebastian Reichel
Matthew Brost
Rafael J. Wysocki
Thomas Hellström
Miaoqing Pan
Srinivas Kandagatla
Claudiu Beznea
Andrii Melnychenko
Fernando Fernandez Mancera
Florian Westphal
Miaoqian Lin
Heikki Krogerus
dongsheng
Dapeng Mi
Qinxin Xia
Jijie Shao
Ivan Vecera
Pavel Zhigulin
Linus Torvalds
Petr Oros
Jessica Zhang
Vladimir Lypak
Neil Armstrong
Daniel Palmer
Quanmin Yan
Junjie Cao
Florian Fuchs