If two competing threads enter alloc_slab_obj_exts(), and the one that
allocates the vector wins the cmpxchg(), the other thread that failed
allocation mistakenly assumes that slab->obj_exts is still empty due to
its own allocation failure. This will then trigger warnings with
CONFIG_MEM_ALLOC_PROFILING_DEBUG checks in the subsequent free path.
Therefore, let's check the result of cmpxchg() to see if marking the
allocation as failed was successful. If it wasn't, check whether the
winning side has succeeded its allocation (it might have been also
marking it as failed) and if yes, return success.
Suggested-by: Harry Yoo <harry.yoo@oracle.com>
Fixes: f7381b9116 ("slab: mark slab->obj_exts allocation failures unconditionally")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://patch.msgid.link/20251023143313.1327968-1-hao.ge@linux.dev
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
The DSD little endian format requires the msb first, the previous
understanding is not correct. The issue is found by testing with
pipewire.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Small set of patches two of which fix problems observed during shutdown
and XRUN scenarios for PCM streaming. These ensure HDAudio HOST stream
is reset and re-setup during XRUNs and synchronize avs_dai_fe_shutdown()
and period-elapsed work (thread) so that no slab-use-after-free panics
occur.
The last change makes the 'format' parameter provided by a
compress-application taken into account - currently its ignored. Such
approach helps us increase the coverage of data probing (debug)
functionality.
During DT-binding review for extending the V4L2 camera sensor privacy LED
support to systems using devicetree, it has come up that having a "-led"
suffix for the LED name / con_id is undesirable since it already is clear
that it is a LED.
Drop the "-led" suffix from the con_id in both the lookup table in
the int3472 code, as well as from the con_id led_get() argument in
the v4l2-subdev code.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Device-managed resources are cleaned up when the driver unbinds from
the underlying device. In our case this is the platform device as this
driver is a platform driver. Registering device-managed resources on
the associated ACPI device will thus result in a resource leak when
this driver unbinds.
Ensure that any device-managed resources are only registered on the
platform device to ensure that they are cleaned up during removal.
Fixes: 35c50d853a ("ACPI: fan: Add hwmon support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+
Link: https://patch.msgid.link/20251007234149.2769-4-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Usage of the ACPI device should be phased out in the future, as
the driver itself is now using the platform bus.
Replace any usage of struct acpi_device in acpi_fan_get_fst() to
allow users to drop usage of struct acpi_device.
Also extend the integer check to all three package elements.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251007234149.2769-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some systems, e.g. Rock 4D, have a pluggable UFS module. Link startup
fails systematically on these systems. If no UFS module has been plugged
in, more than fourty lines are logged after the "link startup failed"
message. Avoid this by reducing link startup failure logging.
An intended side effect of this patch is that scsi_host_busy() is not
called before scsi_add_host() is called.
Commit 995412e23b ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced a regression - the warning shown below is
triggered during every boot. This patch fixes that regression.
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufs_sysfs_add_nodes() is called concurrently with ufs_get_device_desc().
This may cause the following code to be called before
ufs_sysfs_add_nodes():
sysfs_update_group(&hba->dev->kobj, &ufs_sysfs_hid_group);
If this happens, ufs_sysfs_add_nodes() triggers a kernel warning and
fails. Fix this by calling ufs_sysfs_add_nodes() before SCSI LUNs are
scanned since the sysfs_update_group() call happens from the context of
thread that executes ufshcd_async_scan(). This patch fixes the following
kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Fixes: bb7663dec6 ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to UFS specifications, the power-off sequence for a UFS device
includes:
- Sending an SSU command with Power_Condition=3 and await a response.
- Asserting RST_N low.
- Turning off REF_CLK.
- Turning off VCC.
- Turning off VCCQ/VCCQ2.
As part of ufs shutdown, after the SSU command completion, asserting
hardware reset (HWRST) triggers the device firmware to wake up and
execute its reset routine. This routine initializes hardware blocks and
takes a few milliseconds to complete. During this time, the ICCQ draws a
large current.
This large ICCQ current may cause issues for the regulator which is
supplying power to UFS, because the turn off request from UFS driver to
the regulator framework will be immediately followed by low power
mode(LPM) request by regulator framework. This is done by framework
because UFS which is the only client is requesting for disable. So if
the rail is still in the process of shutting down while ICCQ exceeds LPM
current thresholds, and LPM mode is activated in hardware during this
state, it may trigger an overcurrent protection (OCP) fault in the
regulator.
To prevent this, a 10ms delay is added after asserting HWRST. This
allows the reset operation to complete while power rails remain active
and in high-power mode.
Currently there is no way for Host to query whether the reset is
completed or not and hence this the delay is based on experiments with
Qualcomm UFS controllers across multiple UFS vendors.
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251012173828.9880-1-nitin.rawat@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED!
At least on the client side (with similar code)
wait_event_interruptible() often returns with -ERESTARTSYS instead of
waiting for SMBDIRECT_SOCKET_DISCONNECTED.
We should use wait_event() here too, which makes the code be identical
in client and server, which will help when moving to common functions.
Fixes: b31606097d ("smb: server: move smb_direct_disconnect_rdma_work() into free_transport()")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 620a50c927 ("io_uring: uring_cmd: add multishot support") added
multishot uring_cmd support with explicit buffer upfront commit via
io_uring_mshot_cmd_post_cqe(). However, the buffer selection path in
io_ring_buffer_select() was auto-committing buffers for non-pollable files,
which conflicts with uring_cmd's explicit upfront commit model.
This way consumes the whole selected buffer immediately, and causes
failure on the following buffer selection.
Fix this by checking uring_cmd to identify operations that handle buffer
commit explicitly, and skip auto-commit for these operations.
Cc: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 620a50c927 ("io_uring: uring_cmd: add multishot support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In virtio-net, we have not yet supported multi-buffer XDP packet in
zerocopy mode when there is a binding XDP program. However, in that
case, when receiving multi-buffer XDP packet, we skip the XDP program
and return XDP_PASS. As a result, the packet is passed to normal network
stack which is an incorrect behavior (e.g. a XDP program for packet
count is installed, multi-buffer XDP packet arrives and does go through
XDP program. As a result, the packet count does not increase but the
packet is still received from network stack).This commit instead returns
XDP_ABORTED in that case.
Fixes: 99c861b44e ("virtio_net: xsk: rx: support recv merge mode")
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20251022155630.49272-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The root cause of this issue are:
1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0);
put the kevent work in global workqueue. However, the kevent has not yet
been scheduled when the usbnet device is unregistered. Therefore, executing
free_netdev() results in the "free active object (kevent)" error reported
here.
2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(),
if the usbnet device is up, ndo_stop() is executed to cancel the kevent.
However, because the device is not up, ndo_stop() is not executed.
The solution to this problem is to cancel the kevent before executing
free_netdev().
Fixes: a69e617e53 ("usbnet: Fix linkwatch use-after-free on disconnect")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
First set of fixes:
- brcmfmac: long-standing crash when used w/o P2P
- iwlwifi: fix for a use-after-free bug
- mac80211: key tailroom accounting bug could leave
allocation overhead and cause a warning
- ath11k: add a missing platform,
fix key flag operations
- bcma: skip devices disabled in OF/DT
- various (potential) memory leaks
* tag 'wireless-2025-10-23' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: call kfree without a NULL check
wifi: mac80211: fix key tailroom accounting leak
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
MAINTAINERS: wcn36xx: Add linux-wireless list
bcma: don't register devices disabled in OF
wifi: mac80211: reset FILS discovery and unsol probe resp intervals
wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()
wifi: ath11k: avoid bit operation on key flags
wifi: ath12k: free skb during idr cleanup callback
wifi: ath11k: Add missing platform IDs for quirk table
wifi: ath10k: Fix memory leak on unsupported WMI command
====================
Link: https://patch.msgid.link/20251023180604.626946-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark has been kindly helping fill in when I have been unavailable over
the past several years. He has also put his hand up to take over
linux-next maintenance when I finally decide to stop (which may be some
time yet ;-) ).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both mt8195-afe-pcm and mt8365-afe-pcm drivers use devm_pm_runtime_enable()
in probe function, which automatically calls pm_runtime_disable() on device
removal via devres mechanism. However, the remove callbacks explicitly call
pm_runtime_disable() again, resulting in double pm_runtime_disable() calls.
Fix by removing the redundant pm_runtime_disable() calls from remove
functions, letting the devres framework handle it automatically.
Fixes: 2ca0ec01d4 ("ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe")
Fixes: e1991d102b ("ASoC: mediatek: mt8365: Add the AFE driver support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251020170440.585-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
Masahiro Yamada stepped down as Kbuild and Kconfig maintainer in
commit 8d6841d5cb ("MAINTAINERS: hand over Kbuild maintenance"),
leaving Kconfig officially orphaned and handing Kbuild over to Nicolas
and myself. Since then, there have been a few simple patches to Kconfig
that have ended up on the linux-kbuild mailing list without clear
direction on who will take them, as they are not really sent to anybody
officially, although the list is obviously watched by the Kbuild
maintainers.
Make Nicolas and I official maintainers of Kconfig in "Odd Fixes"
status, similar to Kbuild, so that the subsystem has clear points of
contact for contributors, even if significant contributions may not be
accepted.
Additionally, add the Kbuild tree to this section.
Acked-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251023-update-kconfig-maintainers-v1-1-0ebd5b4ecced@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.18, please pull the following:
- Peter describes the VGIC interrupt line such that KVM can be used on
Raspberry Pi 5 systems.
* tag 'arm-soc/for-6.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.18, please pull the following:
- Stefan switches the V3D block to use the firmware clock, rather than
the bare metal clock. This fixes hangs on boot after recent changes to
the V3D driver clocking went in.
* tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm FF-A fix for v6.18
The FF-A driver was updated to support specification version 1.2 but omitted
support for the 16-byte implementation-defined (IMPDEF) field introduced in
FF-A v1.2 within the Endpoint Memory Access Descriptor (EMAD). This omission
breaks all memory interfaces.
This change updates the EMAD sizing and offset logic to correctly handle the
FF-A v1.2 layout while preserving backward compatibility with older versions.
* tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull arm64 fixes from Catalin Marinas:
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
The switch_brightness_work delayed work accesses device->brightness
and device->backlight, freed by acpi_video_dev_unregister_backlight()
during device removal.
If the work executes after acpi_video_bus_unregister_backlight()
frees these resources, it causes a use-after-free when
acpi_video_switch_brightness() dereferences device->brightness or
device->backlight.
Fix this by calling cancel_delayed_work_sync() for each device's
switch_brightness_work in acpi_video_bus_remove_notify_handler()
after removing the notify handler that queues the work. This ensures
the work completes before the memory is freed.
Fixes: 8ab58e8e7e ("ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Yuhao Jiang <danisjiang@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
[ rjw: Changelog edit ]
Link: https://patch.msgid.link/20251022200704.2655507-1-danisjiang@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Pull ACPI fixes from Rafael Wysocki:
"These fix a fallout of a recent ACPI properties management update and
work around a compiler bug in ACPICA:
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)"
* tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Work around bogus -Wstringop-overread warning since GCC 11
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Pull power management fixes from Rafael Wysocki:
"These revert a cpuidle menu governor commit leading to a performance
regression, fix an amd-pstate driver regression introduced recently,
and fix new conditional guard definitions for runtime PM.
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)"
* tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix conditional guard definitions
Revert "cpuidle: menu: Avoid discarding useful information"
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
Since commit af92793e52 ("slab: Introduce kmalloc_nolock() and
kfree_nolock().") there's a possibility in alloc_single_from_new_slab()
that we discard the newly allocated slab if we can't spin and we fail to
trylock. As a result we don't perform inc_slabs_node() later in the
function. Instead we perform a deferred deactivate_slab() which can
either put the unacounted slab on partial list, or discard it
immediately while performing dec_slabs_node(). Either way will cause an
accounting imbalance.
Fix this by not marking the slab as frozen, and using free_slab()
instead of deactivate_slab() for non-frozen slabs in
free_deferred_objects(). For CONFIG_SLUB_TINY, that's the only possible
case. By not using discard_slab() we avoid dec_slabs_node().
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Link: https://patch.msgid.link/20251023-fix-slab-accounting-v2-1-0e62d50986ea@suse.cz
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Commit 4e65bda827 ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:
Unable to handle kernel paging request at virtual address ffff8000847cbad4
...
CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
Hardware name: Thundercomm Dragonboard 845c (DT)
...
Call trace:
slim_xfer_msg+0x24/0x1ac [slimbus] (P)
slim_read+0x48/0x74 [slimbus]
regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
_regmap_raw_read+0xe8/0x174
_regmap_bus_read+0x44/0x80
_regmap_read+0x60/0xd8
_regmap_update_bits+0xf4/0x140
_regmap_select_page+0xa8/0x124
_regmap_raw_write_impl+0x3b8/0x65c
_regmap_bus_raw_write+0x60/0x80
_regmap_write+0x58/0xc0
regmap_write+0x4c/0x80
wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
__soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
snd_pcm_hw_params+0x124/0x464 [snd_pcm]
snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
snd_pcm_ioctl+0x34/0x4c [snd_pcm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xf0
el0t_64_sync+0x198/0x19c
The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.
While at this, also correct the same argument in __regmap_init_slimbus().
Fixes: 4e65bda827 ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 7d6f7fb053 ("regmap: add SLIMbus support")
Cc: stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022201013.1740211-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP
clock gets actually set, otherwise the function will return before setting
it.
This is an issue as shared->phydev is unconditionally being used when IRQ
is being handled, especially in lan8814_gpio_process_cap and since it was
not set it will cause a NULL pointer exception and crash the kernel.
So, simply always set shared->phydev to avoid the NULL pointer exception.
Fixes: b3f1a08fcf ("net: phy: micrel: Add support for PTP_PF_EXTTS for lan8814")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20251021132034.983936-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not block PCI config accesses through pci_cfg_access_lock() when
executing the s390 variant of PCI error recovery: Acquire just
device_lock() instead of pci_dev_lock() as powerpc's EEH and
generig PCI AER processing do.
During error recovery testing a pair of tasks was reported to be hung:
mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working
INFO: task kmcheck:72 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<000000065256f572>] schedule_preempt_disabled+0x22/0x30
[<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8
[<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core]
[<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core]
[<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398
[<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0
INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000
Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<0000000652172e28>] pci_wait_cfg+0x80/0xe8
[<0000000652172f94>] pci_cfg_access_lock+0x74/0x88
[<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core]
[<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core]
[<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core]
[<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168
[<0000000652513212>] devlink_health_report+0x19a/0x230
[<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]
No kernel log of the exact same error with an upstream kernel is
available - but the very same deadlock situation can be constructed there,
too:
- task: kmcheck
mlx5_unload_one() tries to acquire devlink lock while the PCI error
recovery code has set pdev->block_cfg_access by way of
pci_cfg_access_lock()
- task: kworker
mlx5_crdump_collect() tries to set block_cfg_access through
pci_cfg_access_lock() while devlink_health_report() had acquired
the devlink lock.
A similar deadlock situation can be reproduced by requesting a
crdump with
> devlink health dump show pci/<BDF> reporter fw_fatal
while PCI error recovery is executed on the same <BDF> physical function
by mlx5_core's pci_error_handlers. On s390 this can be injected with
> zpcictl --reset-fw <BDF>
Tests with this patch failed to reproduce that second deadlock situation,
the devlink command is rejected with "kernel answers: Permission denied" -
and we get a kernel log message of:
mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5
because the config read of VSC_SEMAPHORE is rejected by the underlying
hardware.
Two prior attempts to address this issue have been discussed and
ultimately rejected [see link], with the primary argument that s390's
implementation of PCI error recovery is imposing restrictions that
neither powerpc's EEH nor PCI AER handling need. Tests show that PCI
error recovery on s390 is running to completion even without blocking
access to PCI config space.
Link: https://lore.kernel.org/all/20251007144826.2825134-1-gbayer@linux.ibm.com/
Cc: stable@vger.kernel.org
Fixes: 4cdf2f4e24 ("s390/pci: implement minimal PCI error recovery")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Simona Vetter
Hao Ge
Mark Brown
Charles Keepax
Marek Szyprowski
Ricardo Ribalda
Hans de Goede
Armin Wolf
Matthew Brost
Bart Van Assche
Nitin Rawat
Stefan Metzmacher
Ming Lei
Bjorn Helgaas
Takashi Sakamoto
Bui Quang Minh
Lizhi Xu
Jakub Kicinski
Stephen Rothwell
Haotian Zhang
Linus Torvalds
Nathan Chancellor
Arnd Bergmann
Yuhao Jiang
Andrii Nakryiko
Catalin Marinas
Vlastimil Babka
Alexey Klimov
Patrisious Haddad
Alexei Lazar
Jason Wang
Robert Marko
Gerd Bayer