Handling of errors when reading status, temperature, and humidity returns
the error number as negative attribute value. Fix it up by returning
the error as return value.
Fixes: a0ac418c60 ("hwmon: (sht3x) convert some of sysfs interface to hwmon")
Cc: JuenKit Yip <JuenKit_Yip@hotmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver allocates memory for sensor data using devm_kzalloc(), but
did not check if the allocation succeeded. In case of memory allocation
failure, dereferencing the NULL pointer would lead to a kernel crash.
Add a NULL pointer check and return -ENOMEM to handle allocation failure
properly.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Fixes: 08ebc9def7 ("hwmon: Add Congatec Board Controller monitoring driver")
Reviewed-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20251017063414.1557447-1-liqiang01@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Removing this match entry ensures that a PTL system comprising of a
cs42l43 codec on link3 will use function topologies.
Previously the behaviour would be use the monolithic topology associated
with this codec match table entry in preference to function topologies
and if the system had a number of smart amplifiers then they would not
be instantiated.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251016112601.187020-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The filter configuration register(0x26) has AHPF(bit6) for primary record
path, which is common in max98090 and max98091 and has been defined as
DAPM suppy widget as "AHPF" in
"struct snd_soc_dapm_widget max98090_dapm_widget[]".
It is the DC-Blocking filter for the primary record path.
But the same functionality for secondary record path in the configuration
register(0x26) is DMIC2_HPF(bit2). It is not present as a DAPM supply
widget in the current code. With this patch adding it as a DAPM supply
widget. In the current code, the mics on secondary record path in
code are named as "DMIC3" and "DMIC4", so accordingly naming
DMIC2_HPF(bit2) as "DMIC34_HPF", and declaring it as a DAPM supply
widget in "struct snd_soc_dapm_widget max98091_dapm_widget[]". Also it
is specific to max98091, and should be visible or working only when
max98091 codec chip is used. Therefore, written in
"max98091_dapm_widget[]". As "AHPF" is not part
of secondary record path, replacing it with "DMIC34_HPF" in the
ALSA routes to "DMIC3" and "DMIC4" in "max98091_dapm_routes[]".
Signed-off-by: Sharique Mohammad <sharq0406@gmail.com>
Link: https://patch.msgid.link/20251016151152.1107083-1-sharq0406@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds some match entries for a few system configurations:
cs42l43 link 0 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs42l43 link 1 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251016150837.320886-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull scheduler fixes from Borislav Petkov:
- Make sure the check for lost pelt idle time is done unconditionally
to have correct lost idle time accounting
- Stop the deadline server task before a CPU goes offline
* tag 'sched_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix pelt lost idle time detection
sched/deadline: Stop dl_server before CPU goes offline
Pull perf fixes from Borislav Petkov:
- Make sure perf reporting works correctly in setups using
overlayfs or FUSE
- Move the uprobe optimization to a better location logically
* tag 'perf_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix MMAP2 event device with backing files
perf/core: Fix MMAP event path names with backing files
perf/core: Fix address filter match with backing files
uprobe: Move arch_uprobe_optimize right after handlers execution
Pull x86 fixes from Borislav Petkov:
- Reset the why-the-system-rebooted register on AMD to avoid stale bits
remaining from previous boots
- Add a missing barrier in the TLB flushing code to prevent erroneously
not flushing a TLB generation
- Make sure cpa_flush() does not overshoot when computing the end range
of a flush region
- Fix resctrl bandwidth counting on AMD systems when the amount of
monitoring groups created exceeds the number the hardware can track
* tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Prevent reset reasons from being retained across reboot
x86/mm: Fix SMP ordering in switch_mm_irqs_off()
x86/mm: Fix overflow in __cpa_addr()
x86/resctrl: Fix miscount of bandwidth event when reactivating previously unavailable RMID
In `UVERBS_METHOD_CQ_CREATE`, umem should be released if anything goes
wrong. Currently, if `create_cq_umem` fails, umem would not be
released or referenced, causing a possible leak.
In this patch, we release umem at `UVERBS_METHOD_CQ_CREATE`, the driver
should not release umem if it returns an error code.
Fixes: 1a40c362ae ("RDMA/uverbs: Add a common way to create CQ with umem")
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Link: https://patch.msgid.link/aOh1le4YqtYwj-hH@osx.local
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The driver maintains a CQ table that is used to ensure that a CQ is
still valid when processing CQ related AEs. When a CQ is destroyed,
the table entry is cleared, using irdma_cq.cq_num as the index. This
field was never being set, so it was just always clearing out entry
0.
Additionally, the cq_num field size was increased to accommodate HW
supporting more than 64K CQs.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923142439.943930-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In some cases, it is possible for pble_rsrc->next_fpm_addr to be
larger than u32, so remove the u32 cast to avoid unintentional
truncation.
This fixes the following error that can be observed when registering
massive memory regions:
[ 447.227494] (NULL ib_device): cqp opcode = 0x1f maj_err_code = 0xffff min_err_code = 0x800c
[ 447.227505] (NULL ib_device): [Update PE SDs Cmd Error][op_code=21] status=-5 waiting=1 completion_err=1 maj=0xffff min=0x800c
Fixes: e8c4dbc2fc ("RDMA/irdma: Add PBLE resource manager")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923190850.1022773-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The current error handling path in bnxt_re_destroy_gsi_sqp() could lead
to a resource leak. When bnxt_qplib_destroy_qp() fails, the function
jumps to the 'fail' label and returns immediately, skipping the call
to bnxt_qplib_free_qp_res().
Continue the resource teardown even if bnxt_qplib_destroy_qp() fails,
which aligns with the driver's general error handling strategy and
prevents the potential leak.
Fixes: 8dae419f9e ("RDMA/bnxt_re: Refactor queue pair creation code")
Signed-off-by: YanLong Dai <daiyanlong@kylinos.cn>
Link: https://patch.msgid.link/20250924061444.11288-1-daiyanlong@kylinos.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pull rustfmt fixes from Miguel Ojeda:
"Rust 'rustfmt' cleanup
'rustfmt', by default, formats imports in a way that is prone to
conflicts while merging and rebasing, since in some cases it condenses
several items into the same line.
Document in our guidelines that we will handle this for the moment
with the trailing empty comment workaround and make the tree
'rustfmt'-clean again"
* tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: bitmap: fix formatting
rust: cpufreq: fix formatting
rust: alloc: employ a trailing comment to keep vertical layout
docs: rust: add section on imports formatting
Pull tpm fix from Jarkko Sakkinen:
"Correct the state transitions for ARM FF-A to match the spec and how
tpm_crb behaves on other platforms"
* tag 'tpmdd-next-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb: Add idle support for the Arm FF-A start method
Pull pci fixes from Bjorn Helgaas:
- Search for MSI Capability with correct ID to fix an MSI regression on
platforms with Cadence IP (Hans Zhang)
- Revert early bridge resource set up to fix resource assignment
failures that broke at least alpha boot and Snapdragon ath12k WiFi
(Ilpo Järvinen)
- Implement VMD .irq_startup()/.irq_shutdown() to fix IRQ issues that
caused boot crashes and broken devices below VMD (Inochi Amaoto)
- Select CONFIG_SCREEN_INFO on X86 to fix black screen on boot when
SCREEN_INFO not selected (Mario Limonciello)
* tag 'pci-v6.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/VGA: Select SCREEN_INFO on X86
PCI: vmd: Override irq_startup()/irq_shutdown() in vmd_init_dev_msi_info()
PCI: Revert early bridge resource set up
PCI: cadence: Search for MSI Capability with correct ID
Pull Compute Express Link fixes from Dave Jiang:
"A small collection of CXL fixes. In addition to some misc fixes for
the CXL subsystem, a number of fixes for CXL extended linear cache
support are included to make it functional again.
- Avoid missing port component registers setup due to dport
enumeration failure
- Add check for no entries in cxl_feature_info to address accessing
invalid pointer.
- Use %pa printk format to emit resource_size_t in
validate_region_offset()
CXL extended linear cache support fixes:
- Fix setup of memory resource in cxl_acpi_set_cache_size()
- Set range param for region_res_match_cxl_range() as const
(addresses a compile warning for match_region_by_range() fix)
- Fix match_region_by_range() to use region_res_match_cxl_range()
- Subtract to find an hpa_alias0 in cxl_poison events to correct the
alias math calculation"
* tag 'cxl-fixes-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/trace: Subtract to find an hpa_alias0 in cxl_poison events
cxl/region: Use %pa printk format to emit resource_size_t
cxl: Fix match_region_by_range() to use region_res_match_cxl_range()
cxl: Set range param for region_res_match_cxl_range() as const
cxl/acpi: Fix setup of memory resource in cxl_acpi_set_cache_size()
cxl/features: Add check for no entries in cxl_feature_info
cxl/port: Avoid missing port component registers setup
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
Pull exfat fixes from Namjae Jeon:
- Fix out-of-bounds in FS_IOC_SETFSLABEL
- Add validation for stream entry size to prevent infinite loop
* tag 'exfat-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix out-of-bounds in exfat_nls_to_ucs2()
exfat: fix improper check of dentry.stream.valid_size
Pull NFS client fixes from Anna Schumaker:
- Fix for FlexFiles mirror->dss allocation
- Apply delay_retrans to async operations
- Check if suid/sgid is cleared after a write when needed
- Fix setting the state renewal timer for early mounts after a reboot
* tag 'nfs-for-6.18-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS4: Fix state renewals missing after boot
NFS: check if suid/sgid was cleared after a write as needed
NFS4: Apply delay_retrans to async operations
NFSv4/flexfiles: fix to allocate mirror->dss before use
Pull smb client fixes from Steve French:
"smb client fixes, security and smbdirect improvements, and some minor cleanup:
- Important OOB DFS fix
- Fix various potential tcon refcount leaks
- smbdirect (RDMA) fixes (following up from test event a few weeks
ago):
- Fixes to improve and simplify handling of memory lifetime of
smbdirect_mr_io structures, when a connection gets disconnected
- Make sure we really wait to reach SMBDIRECT_SOCKET_DISCONNECTED
before destroying resources
- Make sure the send/recv submission/completion queues are large
enough to avoid ib_post_send() from failing under pressure
- convert cifs.ko to use the recommended crypto libraries (instead of
crypto_shash), this also can improve performance
- Three small cleanup patches"
* tag '6.18-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
smb: client: Consolidate cmac(aes) shash allocation
smb: client: Remove obsolete crypto_shash allocations
smb: client: Use HMAC-MD5 library for NTLMv2
smb: client: Use MD5 library for SMB1 signature calculation
smb: client: Use MD5 library for M-F symlink hashing
smb: client: Use HMAC-SHA256 library for SMB2 signature calculation
smb: client: Use HMAC-SHA256 library for key generation
smb: client: Use SHA-512 library for SMB3.1.1 preauth hash
cifs: parse_dfs_referrals: prevent oob on malformed input
smb: client: Fix refcount leak for cifs_sb_tlink
smb: client: let smbd_destroy() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: move some duplicate definitions to common/cifsglob.h
smb: client: let destroy_mr_list() keep smbdirect_mr_io memory if registered
smb: client: let destroy_mr_list() call ib_dereg_mr() before ib_dma_unmap_sg()
smb: client: call ib_dma_unmap_sg if mr->sgt.nents is not 0
smb: client: improve logic in smbd_deregister_mr()
smb: client: improve logic in smbd_register_mr()
smb: client: improve logic in allocate_mr_list()
smb: client: let destroy_mr_list() remove locked from the list
smb: client: let destroy_mr_list() call list_del(&mr->list)
...
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
Pull powerpc fixes from Madhavan Srinivasan:
- Fix to handle NULL pointer dereference at irq domain teardown
- Fix for handling extraction of struct xive_irq_data
- Fix to skip parameter area allocation when fadump disabled
Thanks to Ganesh Goudar, Hari Bathini, Nam Cao, Ritesh Harjani (IBM),
Sourabh Jain, and Venkat Rao Bagalkote,
* tag 'powerpc-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/fadump: skip parameter area allocation when fadump is disabled
powerpc, ocxl: Fix extraction of struct xive_irq_data
powerpc/pseries/msi: Fix NULL pointer dereference at irq domain teardown
Pull slab fixes from Vlastimil Babka:
- Fixes for two bugs that can be triggered when debugging options are
enabled (Hao Ge, Vlastimil Babka)
* tag 'slab-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: reset slab->obj_ext when freeing and it is OBJEXTS_ALLOC_FAIL
slab: fix clearing freelist in free_deferred_objects()
This laptop requires the same quirk as Lenovo Yoga9 14IAP7 for
fixing the bass speaker problems.
Use HDA_CODEC_QUIRK to match on the codec SSID to avoid conflict with
the Lenovo Legion Slim 7 16IRH8, which has the same PCI SSID.
Signed-off-by: J-Donald Tournier <jdtournier@gmail.com>
Link: https://patch.msgid.link/20251018145322.39119-1-jdournier@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Resolve this smatch warning:
arch/riscv/kernel/sys_hwprobe.c:50 hwprobe_arch_id() error: uninitialized symbol 'cpu_id'.
This could happen if hwprobe_arch_id() was called with a key ID of
something other than MVENDORID, MIMPID, and MARCHID. This does not
happen in the current codebase. The only caller of hwprobe_arch_id()
is a function that only passes one of those three key IDs.
For the sake of reducing static analyzer warning noise, and in the
unlikely event that hwprobe_arch_id() is someday called with some
other key ID, validate hwprobe_arch_id()'s input to ensure that
'cpu_id' is always initialized before use.
Fixes: ea3de9ce8a ("RISC-V: Add a syscall for HW probing")
Cc: Evan Green <evan@rivosinc.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Link: https://lore.kernel.org/r/cf5a13ec-19d0-9862-059b-943f36107bf3@kernel.org
In has_thead_homogeneous_vlenb(), smatch detected that the vlenb variable
could be used while uninitialized. It appears that this could happen if
no CPUs described in DT have the "thead,vlenb" property.
Fix by initializing vlenb to 0, which will keep thead_vlenb_of set to 0
(as it was statically initialized). This in turn will cause
riscv_v_setup_vsize() to fall back to CSR probing - the desired result if
thead,vlenb isn't provided in the DT data.
While here, fix a nearby comment typo.
Cc: stable@vger.kernel.org
Cc: Charlie Jenkins <charlie@rivosinc.com>
Fixes: 377be47f90 ("riscv: vector: Use vlenb from DT for thead")
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Link: https://lore.kernel.org/r/22674afb-2fe8-2a83-1818-4c37bd554579@kernel.org
Pull amd-pstate 6.18 content (10/15/25) from Mario Limonciello:
"Fix for EPP value in wrong state after S4"
* tag 'amd-pstate-v6.18-2025-10-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
According to the CRB over FF-A specification [1], a TPM that implements
the ABI must comply with the TCG PTP specification. This requires support
for the Idle and Ready states.
This patch implements CRB control area requests for goIdle and
cmdReady on FF-A based TPMs.
The FF-A message used to notify the TPM of CRB updates includes a
locality parameter, which provides a hint to the TPM about which
locality modified the CRB. This patch adds a locality parameter
to __crb_go_idle() and __crb_cmd_ready() to support this.
[1] https://developer.arm.com/documentation/den0138/latest/
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
The hwprobe vDSO data for some keys, like MISALIGNED_VECTOR_PERF,
is determined by an asynchronous kthread. This can create a race
condition where the kthread finishes after the vDSO data has
already been populated, causing userspace to read stale values.
To fix this race, a new 'ready' flag is added to the vDSO data,
initialized to 'false' during arch_initcall_sync. This flag is
checked by both the vDSO's user-space code and the riscv_hwprobe
syscall. The syscall serves as a one-time gate, using a completion
to wait for any pending probes before populating the data and
setting the flag to 'true', thus ensuring userspace reads fresh
values on its first request.
Reported-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Closes: https://lore.kernel.org/linux-riscv/760d637b-b13b-4518-b6bf-883d55d44e7f@irq.a4lg.com/
Fixes: e7c9d66e31 ("RISC-V: Report vector unaligned access speed hwprobe")
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Co-developed-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Jingwei Wang <wangjingwei@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250811142035.105820-1-wangjingwei@iscas.ac.cn
[pjw@kernel.org: fix checkpatch issues]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The pgprot_dmacoherent() is used when allocating memory for
non-coherent devices and by default pgprot_dmacoherent() is
same as pgprot_noncached() unless architecture overrides it.
Currently, there is no pgprot_dmacoherent() definition for
RISC-V hence non-coherent device memory is being mapped as
IO thereby making CPU access to such memory slow.
Define pgprot_dmacoherent() to be same as pgprot_writecombine()
for RISC-V so that CPU access non-coherent device memory as
NOCACHE which is better than accessing it as IO.
Fixes: ff689fd21c ("riscv: add RISC-V Svpbmt extension support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Han Gao <rabenda.cn@gmail.com>
Tested-by: Guo Ren (Alibaba DAMO Academy) <guoren@kernel.org>
Link: https://lore.kernel.org/r/20250820152316.1012757-1-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When splitting the RTL8221B-VM-CG into C22 and C45 variants, the name was
accidentally changed to RTL8221B-VN-CG. This patch brings back the previous
part number.
Fixes: ad5ce743a6 ("net: phy: realtek: Add driver instances for rtl8221b via Clause 45")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016192325.2306757-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guenter Roeck
Li Qiang
Erick Karanja
Harshit Mogalapalli
Alexis Czezar Torreno
Srinivas Kandagatla
Simon Trimmer
Sharique Mohammad
Richard Fitzgerald
Linus Torvalds
Dan Carpenter
Shuhao Fu
Jacob Moroni
YanLong Dai
Roy Vegard Ovesen
J-Donald Tournier
Paul Walmsley
Rafael J. Wysocki
Stuart Yoder
Paolo Bonzini
Jingwei Wang
Anup Patel
Samuel Holland
Sunil V L
Aleksander Jan Bajkowski