Pull vfs fixes from Christian Brauner:
- Handle inode number mismatches in nsfs file handles
- Update the comment to init_file()
- Add documentation link for EBADF in the rust file code
- Skip read lock assertion for read-only filesystems when using dax
- Don't leak disconnected dentries during umount
- Fix new coredump input pattern validation
- Handle ENOIOCTLCMD conversion in vfs_fileattr_{g,s}et() correctly
- Remove redundant IOCB_DIO_CALLER_COMP clearing in overlayfs
* tag 'vfs-6.18-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: remove redundant IOCB_DIO_CALLER_COMP clearing
fs: return EOPNOTSUPP from file_setattr/file_getattr syscalls
Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP"
coredump: fix core_pattern input validation
vfs: Don't leak disconnected dentries on umount
dax: skip read lock assertion for read-only filesystems
rust: file: add intra-doc link for 'EBADF'
fs: update comment in init_file()
nsfs: handle inode number mismatches gracefully in file handles
When performing memory error injection on a THP (Transparent Huge Page)
mapped to userspace on an x86 server, the kernel panics with the following
trace. The expected behavior is to terminate the affected process instead
of panicking the kernel, as the x86 Machine Check code can recover from an
in-userspace #MC.
mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134
mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0}
mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db
mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The root cause of this panic is that handling a memory failure triggered
by an in-userspace #MC necessitates splitting the THP. The splitting
process employs a mechanism, implemented in
try_to_map_unused_to_zeropage(), which reads the pages in the THP to
identify zero-filled pages. However, reading the pages in the THP results
in a second in-kernel #MC, occurring before the initial memory_failure()
completes, ultimately leading to a kernel panic. See the kernel panic
call trace on the two #MCs.
First Machine Check occurs // [1]
memory_failure() // [2]
try_to_split_thp_page()
split_huge_page()
split_huge_page_to_list_to_order()
__folio_split() // [3]
remap_page()
remove_migration_ptes()
remove_migration_pte()
try_to_map_unused_to_zeropage() // [4]
memchr_inv() // [5]
Second Machine Check occurs // [6]
Kernel panic
[1] Triggered by accessing a hardware-poisoned THP in userspace, which is
typically recoverable by terminating the affected process.
[2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page().
[3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page().
[4] Try to map the unused THP to zeropage.
[5] Re-access pages in the hw-poisoned THP in the kernel.
[6] Triggered in-kernel, leading to a panic kernel.
In Step[2], memory_failure() sets the poisoned flag on the page in the THP
by TestSetPageHWPoison() before calling try_to_split_thp_page().
As suggested by David Hildenbrand, fix this panic by not accessing to the
poisoned page in the THP during zeropage identification, while continuing
to scan unaffected pages in the THP for possible zeropage mapping. This
prevents a second in-kernel #MC that would cause kernel panic in Step[4].
Thanks to Andrew Zaborowski for his initial work on fixing this issue.
Link: https://lkml.kernel.org/r/20251015064926.1887643-1-qiuxu.zhuo@intel.com
Link: https://lkml.kernel.org/r/20251011075520.320862-1-qiuxu.zhuo@intel.com
Fixes: b1f202060a ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reported-by: Farrah Chen <farrah.chen@intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 370645f41e ("dma-mapping: force bouncing if the kmalloc() size is
not cache-line-aligned") introduced DMA_BOUNCE_UNALIGNED_KMALLOC feature
and permitted architecture specific code configure kmalloc slabs with
sizes smaller than the value of dma_get_cache_alignment().
When that feature is enabled, the physical address of some small
kmalloc()-ed buffers might be not aligned to the CPU cachelines, thus not
really suitable for typical DMA. To properly handle that case a SWIOTLB
buffer bouncing is used, so no CPU cache corruption occurs. When that
happens, there is no point reporting a false-positive DMA-API warning that
the buffer is not properly aligned, as this is not a client driver fault.
[m.szyprowski@samsung.com: replace is_swiotlb_allocated() with is_swiotlb_active(), per Catalin]
Link: https://lkml.kernel.org/r/20251010173009.3916215-1-m.szyprowski@samsung.com
Link: https://lkml.kernel.org/r/20251009141508.2342138-1-m.szyprowski@samsung.com
Fixes: 370645f41e ("dma-mapping: force bouncing if the kmalloc() size is not cache-line-aligned")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Inki Dae <m.szyprowski@samsung.com>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: "Isaac J. Manjarres" <isaacmanjarres@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation".
DAMON sysfs interface dynamically allocates and uses a damon_ctx object
for testing if given inputs for online DAMON parameters update is valid.
The object is being used without an allocation failure check, and leaked
when the test succeeds. Fix the two bugs.
This patch (of 2):
The damon_ctx for testing online DAMON parameters commit inputs is used
without its allocation failure check. This could result in an invalid
memory access. Fix it by directly returning an error when the allocation
failed.
Link: https://lkml.kernel.org/r/20251003201455.41448-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251003201455.41448-2-sj@kernel.org
Fixes: 4c9ea539ad ("mm/damon/sysfs: validate user inputs from damon_sysfs_commit_input()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both the read and write side use kiocb_done() to finish a request, and
kiocb_done() will call io_put_kbuf() in case a provided buffer was used
for the request. Provided buffers are not supported for writes, hence
NULL is being passed in. This normally works fine, as io_put_kbuf()
won't actually use the value unless REQ_F_BUFFER_RING or
REQ_F_BUFFER_SELECTED is set in the request flags. But depending on
compiler (or whether or not CONFIG_CC_OPTIMIZE_FOR_SIZE is set), that
may be done even though the value is never used. This will then cause a
NULL pointer dereference.
Make it a bit more obvious and check for a NULL io_br_sel, and don't
even bother calling io_put_kbuf() for that case.
Fixes: 5fda512554 ("io_uring/kbuf: switch to storing struct io_buffer_list locally")
Reported-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The S5_RESET_STATUS register is parsed on boot and printed to kmsg.
However, this could sometimes be misleading and lead to users wasting a
lot of time on meaningless debugging for two reasons:
* Some bits are never cleared by hardware. It's the software's
responsibility to clear them as per the Processor Programming Reference
(see [1]).
* Some rare hardware-initiated platform resets do not update the
register at all.
In both cases, a previous reboot could leave its trace in the register,
resulting in users seeing unrelated reboot reasons while debugging random
reboots afterward.
Write the read value back to the register in order to clear all reason bits
since they are write-1-to-clear while the others must be preserved.
[1]: https://bugzilla.kernel.org/show_bug.cgi?id=206537#attach_303991
[ bp: Massage commit message. ]
Fixes: ab81310287 ("x86/CPU/AMD: Print the reason for the last reset")
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/all/20250913144245.23237-1-i@rong.moe/
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference.
Fixes: cb8ea62e64 ("ASoC: amd/sdw_utils: add sof based soundwire generic machine driver")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://patch.msgid.link/20251015075530.146851-1-liqiang01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Haibo Chen <haibo.chen@nxp.com>:
PATCH 1: different operations maybe require different max frequency, so
add flexspi to handle such case, re-config the clock rate when
new coming operation require new clock frequency.
Patch 2: add workaround for erratum ERR050272. Since only add 4us dealy
in nxp_fspi_dll_calibration(), so do not distinguish different
platforms.
Patch 3: add max frequency limitation for different sample clock source
selection. Datasheet give max 66MHz for mode 0 and 166MHz for
mode 3. And IC suggest to add this limitation on all SoCs for
safety and stability.
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED,
it turns out that (at least running some xfstests e.g. cifs/001)
often triggers the case where wait_event_interruptible() returns
with -ERESTARTSYS instead of waiting for SMBDIRECT_SOCKET_DISCONNECTED
to be reached.
Or we are already in SMBDIRECT_SOCKET_DISCONNECTING and never wait
for SMBDIRECT_SOCKET_DISCONNECTED.
Fixes: 050b8c3740 ("smbd: Make upper layer decide when to destroy the transport")
Fixes: e8b3bfe9bc ("cifs: smbd: Don't destroy transport on RDMA disconnect")
Fixes: b0aa92a229 ("smb: client: make sure smbd_disconnect_rdma_work() doesn't run after smbd_destroy() took over")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a simple test for the corner case not currently covered by the
sticky fingers quirk. Because it's a corner case test, we only test this
on a couple of devices, not on all of them because the value of adding
the same test over and over is rather moot.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.
This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.
Fixes: 4f4001bc76 ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by
commit c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN").
However, on multitouch devices, these suffixes may be overridden. Before
that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after
that, multitouch would override them to have an "UNKNOWN" suffix. Just add
HID_DG_PEN to the list of non-overriden suffixes in multitouch.
Before this fix:
[ 0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 UNKNOWN
After this fix:
[ 0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 Stylus
Fixes: c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit 581c448476 ("HID: input: map digitizer battery usage") added
handling of battery events for digitizers (typically for batteries
presented in stylii). Digitizers typically report correct battery levels
only when stylus is actively touching the surface, and in other cases
they may report battery level of 0. To avoid confusing consumers of the
battery information the code was added to filer out reports with 0
battery levels.
However there exist other kinds of devices that may legitimately report
0 battery levels. Fix this by filtering out 0-level reports only for
digitizer usages, and continue reporting them for other kinds of devices
(Smart Batteries, etc).
Reported-by: 卢国宏 <luguohong@xiaomi.com>
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert test_cpu to use the newly added values_close_report() helper
to print detailed diagnostics when a tolerance check fails. This
provides clearer insight into deviations while run in the CI.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some cgroup selftests, such as test_cpu, occasionally fail by a very
small margin and if run in the CI context, it is useful to have detailed
diagnostic output to understand the deviation.
Introduce a values_close_report() helper which performs the same
comparison as values_close(), but prints detailed information when the
values differ beyond the allowed tolerance.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Inspired by commit c065b6046b ("Use CONFIG_EXT4_FS instead of
CONFIG_EXT3_FS in all of the defconfigs") I looked around for any other
left-over EXT3 config options, and found some old defconfig files still
mentioned CONFIG_EXT3_DEFAULTS_TO_ORDERED.
That config option was removed a decade ago in commit c290ea01ab ("fs:
Remove ext3 filesystem driver"). It had a good run, but let's remove it
for good.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
Like many other Rockchip drivers, rockchip-dfi brings with it its own
HIWORD_UPDATE macro. This variant doesn't shift the value (and like the
others, doesn't do any checking).
Remove it, and replace instances of it with hw_bitfield.h's
FIELD_PREP_WM16. Since FIELD_PREP_WM16 requires contiguous masks and
shifts the value for us, some reshuffling of definitions needs to
happen.
This gives us better compile-time error checking, and in my opinion,
nicer code.
Tested on an RK3568 ODROID-M1 board (LPDDR4X at 1560 MHz, an RK3588
Radxa ROCK 5B board (LPDDR4X at 2112 MHz) and an RK3588 Radxa ROCK 5T
board (LPDDR5 at 2400 MHz). perf measurements were consistent with the
measurements of stress-ng --stream in all cases.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
The SCMI_XFER_FLAG_IS_RAW flag was being cleared prematurely in
scmi_xfer_raw_put() before the transfer completion was properly
acknowledged by the raw message handlers.
Move the clearing of SCMI_XFER_FLAG_IS_RAW and SCMI_XFER_FLAG_CHAN_SET
from scmi_xfer_raw_put() to __scmi_xfer_put() to ensure the flags remain
set throughout the entire raw message processing pipeline until the
transfer is returned to the free pool.
Fixes: 3095a3e25d ("firmware: arm_scmi: Add xfer helpers to provide raw access")
Suggested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251008091057.1969260-1-a.shimko.dev@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the SCMI debug subsystem fails to initialize, the related debug root
will be missing, and the underlying descriptor will be NULL.
Handle this fault condition in the SCMI debug helpers that maintain
metrics counters.
Fixes: 0b3d48c472 ("firmware: arm_scmi: Track basic SCMI communication debug metrics")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251014115346.2391418-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There might be many reasons why a user is resizing a ring, e.g. moving
to huge pages or for some memory compaction using IORING_SETUP_NO_MMAP.
Don't bypass resizing, the user will definitely be surprised seeing 0
while the rings weren't actually moved to a new place.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_create_region_mmap_safe() protects publishing of a region against
concurrent mmap calls, however we should also protect against it when
removing a region. There is a gap io_register_mem_region() where it
safely publishes a region, but then copy_to_user goes wrong and it
unsafely frees the region.
Cc: stable@vger.kernel.org
Fixes: 087f997870 ("io_uring/memmap: implement mmap for regions")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the acquisition and release of q->elevator_lock in the
blkg_conf_open_bdev_frozen() and blkg_conf_exit_frozen() functions. The
elevator lock is no longer needed in these code paths since commit
78c271344b ("block: move wbt_enable_default() out of queue freezing
from sched ->exit()") which introduces `disk->rqos_state_mutex` for
protecting wbt state change, and not necessary to abuse elevator_lock
for this purpose.
This change helps to solve the lockdep warning reported from Yu Kuai[1].
Pass blktests/throtl with lockdep enabled.
Links: https://lore.kernel.org/linux-block/e5e7ac3f-2063-473a-aafb-4d8d43e5576e@yukuai.org.cn/ [1]
Fixes: commit 78c271344b ("block: move wbt_enable_default() out of queue freezing from sched ->exit()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After resuming from S4, all CPUs except the boot CPU have the wrong EPP
hint programmed. This is because when the CPUs were offlined the EPP value
was reset to 0.
This is a similar problem as fixed by
commit ba3319e590 ("cpufreq/amd-pstate: Fix a regression leading to EPP
0 after resume") and the solution is also similar. When offlining rather
than reset the values to zero, reset them to match those chosen by the
policy. When the CPUs are onlined again these values will be restored.
Closes: https://community.frame.work/t/increased-power-usage-after-resuming-from-suspend-on-ryzen-7040-kernel-6-15-regression/74531/20?u=mario_limonciello
Fixes: 608a76b652 ("cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
If a smbdirect_mr_io structure if still visible to callers of
smbd_register_mr() we can't free the related memory when the
connection is disconnected! Otherwise smbd_deregister_mr()
will crash.
Now we use a mutex and refcounting in order to keep the
memory around if the connection is disconnected.
It means smbd_deregister_mr() can be called at any later time to free
the memory, which is no longer referenced by nor referencing the
connection.
It also means smbd_destroy() no longer needs to wait for
mr_io.used.count to become 0.
Fixes: 050b8c3740 ("smbd: Make upper layer decide when to destroy the transport")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 305853cce3 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
Fixes: 305853cce3 ("ksmbd: Fix race condition in RPC handle list access")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The following kmemleak splat:
[ 8.105530] kmemleak: Trying to color unknown object at 0xff11000100e918c0 as Black
[ 8.106521] Call Trace:
[ 8.106521] <TASK>
[ 8.106521] dump_stack_lvl+0x4b/0x70
[ 8.106521] kvfree_call_rcu+0xcb/0x3b0
[ 8.106521] ? hrtimer_cancel+0x21/0x40
[ 8.106521] bpf_obj_free_fields+0x193/0x200
[ 8.106521] htab_map_update_elem+0x29c/0x410
[ 8.106521] bpf_prog_cfc8cd0f42c04044_overwrite_cb+0x47/0x4b
[ 8.106521] bpf_prog_8c30cd7c4db2e963_overwrite_timer+0x65/0x86
[ 8.106521] bpf_prog_test_run_syscall+0xe1/0x2a0
happens due to the combination of features and fixes, but mainly due to
commit 6d78b4473c ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
It's using __GFP_HIGH, which instructs slub/kmemleak internals to skip
kmemleak_alloc_recursive() on allocation, so subsequent kfree_rcu()->
kvfree_call_rcu()->kmemleak_ignore() complains with the above splat.
To fix this imbalance, replace bpf_map_kmalloc_node() with
kmalloc_nolock() and kfree_rcu() with call_rcu() + kfree_nolock() to
make sure that the objects allocated with kmalloc_nolock() are freed
with kfree_nolock() rather than the implicit kfree() that kfree_rcu()
uses internally.
Note, the kmalloc_nolock() happens under bpf_spin_lock_irqsave(), so
it will always fail in PREEMPT_RT. This is not an issue at the moment,
since bpf_timers are disabled in PREEMPT_RT. In the future
bpf_spin_lock will be replaced with state machine similar to
bpf_task_work.
Fixes: 6d78b4473c ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/bpf/20251015000700.28988-1-alexei.starovoitov@gmail.com
Since the len argument value passed to exfat_ioctl_set_volume_label()
from exfat_nls_to_utf16() is passed 1 too large, an out-of-bounds read
occurs when dereferencing p_cstring in exfat_nls_to_ucs2() later.
And because of the NLS_NAME_OVERLEN macro, another error occurs when
creating a file with a period at the end using utf8 and other iocharsets.
So to avoid this, you should remove the code that uses NLS_NAME_OVERLEN
macro and make the len argument value be the length of the label string,
but with a maximum length of FSLABEL_MAX - 1.
Reported-by: syzbot+98cc76a76de46b3714d4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=98cc76a76de46b3714d4
Fixes: d01579d590 ("exfat: Add support for FS_IOC_{GET,SET}FSLABEL")
Suggested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Alexey Simakov
Justin Iurman
Linus Torvalds
Qiuxu Zhuo
Deepanshu Kartikey
Alexei Starovoitov
Marek Szyprowski
SeongJae Park
Lance Yang
Jens Axboe
Rong Zhang
Li Qiang
Sharique Mohammad
Frank Li
Mark Brown
Ankan Biswas
Stefan Metzmacher
Tim Hostetler
Benjamin Tissoires
Thadeu Lima de Souza Cascardo
Dmitry Torokhov
Sebastian Chlad
Nicolas Frattaroli
Miguel Ojeda
Artem Shimko
Cristian Marussi
Jouni Högander
Pavel Begunkov
Ming Lei
Yu Kuai
Mario Limonciello (AMD)
Xianwei Zhao
ZhangGuoDong
Marios Makassikis
Srinivas Kandagatla
Shuming Fan
Jeongjun Park