When userspace issues commands to a freeze listener, it identifies it
using a cookie. Normally this cookie uniquely identifies a freeze
listener, but when userspace clears a listener with the intent of
deleting it, it's allowed to "regret" clearing it and create a new
freeze listener for the same node using the same cookie. (IMO this was
an API mistake, but userspace relies on it.)
Currently if the active freeze listener gets fully deleted while there
are still pending duplicates, then the code incorrectly deletes the
pending duplicates too. To fix this, do not delete the entry if there
are still pending duplicates.
Since the current data structure requires a main freeze listener, we
convert one pending duplicate into the primary listener in this
scenario.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Consider the following scenario:
1. A freeze notification is delivered to thread 1.
2. The process becomes frozen or unfrozen.
3. The message for step 2 is delivered to thread 2 and ignored because
there is already a pending notification from step 1.
4. Thread 1 acknowledges the notification from step 1.
In this case, step 4 should ensure that the message ignored in step 3 is
resent as it can now be delivered.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clippy reports:
error: replacing a value of type `T` with `T::default()` is better expressed using `core::mem::take`
--> drivers/android/binder/node.rs:690:32
|
690 | _unused_capacity = mem::replace(&mut inner.freeze_list, KVVec::new());
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider using: `core::mem::take(&mut inner.freeze_list)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#mem_replace_with_default
= note: `-D clippy::mem-replace-with-default` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::mem_replace_with_default)]`
The suggestion seems fine, thus apply it.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fmh_gpib driver contains a device reference count leak in
fmh_gpib_attach_impl() where driver_find_device() increases the
reference count of the device by get_device() when matching but this
reference is not properly decreased. Add put_device() in
fmh_gpib_detach(), which ensures that the reference count of the
device is correctly managed.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 8e4841a088 ("staging: gpib: Add Frank Mori Hess FPGA PCI GPIB driver")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the ATN (Attention) line is asserted during a read we get a
NIUSB_ATN_STATE_ERROR during a read. For the controller to send a
device clear it asserts ATN. Normally this is an error but in the case
of a device clear it should be regarded as an interrupt.
Return -EINTR when the Device Clear Active State (DCAS) is entered
else signal an error with dev_dbg with status instead of just dev_err.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver was not sending device clear or trigger events when the
board entered the DCAS or DTAS state respectively in device mode.
DCAS is the Device Clear Active State which is entered on receiving a
selective device clear message (SDC) or universal device clear message
(DCL) from the controller in charge.
DTAS is the Device Trigger Active State which is entered on receiving
a group execute trigger (GET) message from the controller.
In order for an application, implementing a particular device, to
detect when one of these states is entered the driver needs to send
the appropriate event.
Send the appropriate gpib_event when DCAS or DTAS is set in the
reported status word. This sets the DCAS or DTAS bits in the board's
status word which can be monitored by the application.
Fixes: 4e127de14f ("staging: gpib: Add National Instruments USB GPIB driver")
Cc: stable <stable@kernel.org>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EOI (End Or Identify) is a hardware line on the GPIB bus that can be
asserted with the last byte of a message to indicate the end of the
transfer to the receiving device.
In this driver, a write with send_eoi true is done in 3 parts:
Send first byte directly
Send remaining but 1 bytes using the fifo
Send the last byte directly with EOI asserted
The first byte in a write is always sent by writing to the tms9914
chip directly to setup for the subsequent fifo transfer. We were not
checking for a 1 byte write with send_eoi true resulting in EOI not
being asserted. Since the fifo transfer was not executed
(fifotransfersize == 0) the retval in the test after the fifo transfer
code was still 1 from the preceding direct write. This caused it to
return without executing the final direct write which would have sent
an unsollicited extra byte.
For a 2 byte message the first byte was sent directly. But since the
fifo transfer was not executed (fifotransfersize == 1) and the retval
in the test after the fifo transfer code was still 1 from the
preceding first byte write it returned before the final direct byte
write with send_eoi true. The second byte was then sent as a separate
1 byte write to complete the 2 byte write count again without EOI
being asserted as above.
Only send the first byte directly if more than 1 byte is to be
transferred with send_eoi true.
Also check for retval < 0 for the error return in case the fifo code
is not used (1 or 2 byte message with send_eoi true).
Fixes: 09a4655ee1 ("staging: gpib: Add HP/Agilent/Keysight 8235xx PCI GPIB driver")
Cc: stable <stable@kernel.org>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The software reset for TAS5825 is different form other chips, as it will
set as 0x11 instead of 0x1 during reset in the tasdevice_reset(). So set
tas2781_hda::tasdevice_priv::chip_id as TAS5825, tasdevice_reset() can
work correctly.
Fixes: 7ceb69ca82 ("ASoC: tas2781: Add tas2118, tas2x20, tas5825 support")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the missing multiport controller binding to target list.
Fix minItems for interrupt-names to avoid the following error on High
Speed controller:
usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 6e762f7b8e ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Cc: stable@vger.kernel.org
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intel USBIO driver is x86 only, other architectures have ACPI
so add an appropriate depenecy plus compile test.
Fixes: 121a0f839d ("usb: misc: Add Intel USBIO bridge driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ports definition currently defined in the usb-switch.yaml
fits standards devices which are either recipient of altmode
muxing and orientation switching events or an element of the
USB Super Speed data lanes.
This doesn't necessarely fit combo PHYs like the Qualcomm
USB3/DP Combo which has a different ports representation.
Move the ports definition to a separate usb-switch-ports.yaml
and reference it next to the usb-switch.yaml, except for
the Qualcomm USB3/DP Combo PHY bindings.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
Fixes: 3bad7fe227 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_clk_bulk_get_all_enabled() is used in the probe, so
clk_bulk_disable_unprepare() should not be called explicitly in the remove
function.
Fixes: e0b6dc00c7 ("usb: dwc3: add generic driver to support flattened")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6d4405b16d ("ata: libata-core: Cache the general purpose log
directory") introduced caching of a device general purpose log directory
to avoid repeated access to this log page during device scan. This
change also added a check on this log page to verify that the log page
version is 0x0001 as mandated by the ACS specifications.
And it turns out that some devices do not bother reporting this version,
instead reporting a version 0, resulting in error messages such as:
ata6.00: Invalid log directory version 0x0000
and to the device being marked as not supporting the general purpose log
directory log page.
Since before commit 6d4405b16d the log page version check did not
exist and things were still working correctly for these devices, relax
ata_read_log_directory() version check and only warn about the invalid
log page version number without disabling access to the log directory
page.
Fixes: 6d4405b16d ("ata: libata-core: Cache the general purpose log directory")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220635
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Fadump allocates memory to pass additional kernel command-line argument
to the fadump kernel. However, this allocation is not needed when fadump
is disabled. So avoid allocating memory for the additional parameter
area in such cases.
Fixes: f4892c68ec ("powerpc/fadump: allocate memory for additional parameters early")
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Fixes: f4892c68ec ("powerpc/fadump: allocate memory for additional parameters early")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251008032934.262683-1-sourabhjain@linux.ibm.com
Commit cc0cc23bab ("powerpc/xive: Untangle xive from child interrupt
controller drivers") changed xive_irq_data to be stashed to chip_data
instead of handler_data. However, multiple places are still attempting to
read xive_irq_data from handler_data and get a NULL pointer deference bug.
Update them to read xive_irq_data from chip_data.
Non-XIVE files which touch xive_irq_data seem quite strange to me,
especially the ocxl driver. I think there ought to be an alternative
platform-independent solution, instead of touching XIVE's data directly.
Therefore, I think this whole thing should be cleaned up. But perhaps I
just misunderstand something. In any case, this cleanup would not be
trivial; for now, just get things working again.
Fixes: cc0cc23bab ("powerpc/xive: Untangle xive from child interrupt controller drivers")
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Closes: https://lore.kernel.org/linuxppc-dev/68e48df8.170a0220.4b4b0.217d@mx.google.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251008081359.1382699-1-namcao@linutronix.de
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
Convert remaining __init__ files similar to what we did in
commit b615879dbf ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no error handling for `dma_map_single()` failures.
Add error handling by checking `dma_mapping_error()` and freeing
the `skb` using `dev_kfree_skb()` (process context) when it fails.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Tested-on: D-Link DGE-550T Rev-A3
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Limit tx/rx buffer address to 32-bit address space for board with more
than 4GB DRAM.
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Fixes: 6757d345dd ("net: ethernet: mtk_wed: introduce hw_rro support for MT7988")
Tested-by: Daniel Pawlik <pawlik.dan@gmail.com>
Tested-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
write timeout errors (-ETIMEDOUT). In the timeout fallthrough path, it first
attempted to restore the pin configuration for LED outputs and then
returned only the status of that restore operation, discarding the
original timeout error saved in ret.
As a result, callers could mistakenly treat EEPROM write operation as
successful even though the EEPROM write had actually timed out with no
or partial data write.
To fix this, handle errors in restoring the LED pin configuration separately.
If the restore succeeds, return any prior EEPROM write timeout error saved
in ret to the caller.
Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 8b1b2ca83b ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
cc: stable@vger.kernel.org
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
Pull slab fix from Vlastimil Babka:
"A NULL pointer deref hotfix"
* tag 'slab-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: fix barn NULL pointer dereference on memoryless nodes
Pull more updates from Andrew Morton:
"Just one series here - Mike Rappoport has taught KEXEC handover to
preserve vmalloc allocations across handover"
* tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/test_kho: use kho_preserve_vmalloc instead of storing addresses in fdt
kho: add support for preserving vmalloc allocations
kho: replace kho_preserve_phys() with kho_preserve_pages()
kho: check if kho is finalized in __kho_preserve_order()
MAINTAINERS, .mailmap: update Umang's email address
Pull misc fixes from Andrew Morton:
"7 hotfixes. All 7 are cc:stable and all 7 are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hugetlb: avoid soft lockup when mprotect to large memory area
fsnotify: pass correct offset to fsnotify_mmap_perm()
mm/ksm: fix flag-dropping behavior in ksm_madvise
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
mm/rmap: fix soft-dirty and uffd-wp bit loss when remapping zero-filled mTHP subpage to shared zeropage
mm/thp: fix MTE tag mismatch when replacing zero-filled subpages
memcg: skip cgroup_file_notify if spinning is not allowed
There is now a new LT9211 rev. U5, which reports chip ID 0x18 0x01 0xe4 .
The previous LT9211 reported chip ID 0x18 0x01 0xe3 , which is what the
driver checks for right now. Since there is a possibility there will be
yet another revision of the LT9211 in the future, drop the last version
nibble check to allow all future revisions of the chip to work with this
driver.
This fix makes LT9211 rev. U5 work with this driver.
Fixes: 8ce4129e3d ("drm/bridge: lt9211: Add Lontium LT9211 bridge driver")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251011110017.12521-1-marek.vasut@mailbox.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
There're several different actual hardwares sold by Huawei, using the
same USB ID 12d1:3a07.
The first one we found, having a volume control named "Headset Playback
Volume", reports a min value -15360, and will mute iff setting it to
-15360. It can be simply fixed by quirk flag MIXER_PLAYBACK_MIN_MUTE,
which we have already submitted previously.[1]
The second one we found today, having a volume control named "PCM
Playback Volume", reports its min -11520 and res 256, and will mute
when less than -11008. Because of the already existing quirk flag, we
can just set its min to -11264, and the new minimum value will still
not be available to userspace, so that userspace's minimum will be the
correct -11008.
1. https://lore.kernel.org/all/20250903-sound-v1-3-d4ca777b8512@uniontech.com/
Tested-by: Guoli An <anguoli@uniontech.com>
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This motherboard uses USB audio instead, causing this driver to complain
about "no codecs found!".
Add it to the denylist to silence the warning.
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ae7abe36e3 ("ALSA: hda/realtek: Add CS35L41 support for Thinkpad laptops")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return value of a function acpi_evaluate_dsm() is dereferenced without
checking for NULL, but it is usually checked for this function.
acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns
acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 447106e92a ("ALSA: hda: cs35l41: Support mute notifications for CS35L41 HDA")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fix to use a per CPU buffer to read user space tested only the writes
to trace_marker. But it appears that the selftests are missing tests to
the trace_maker_raw file. The trace_maker_raw file is used by applications
that writes data structures and not strings into the file, and the tools
read the raw ring buffer to process the structures it writes.
The fix that reads the per CPU buffers passes the new per CPU buffer to
the trace_marker file writes, but the update to the trace_marker_raw write
read the data from user space into the per CPU buffer, but then still used
then passed the user space address to the function that records the data.
Pass in the per CPU buffer and not the user space address.
TODO: Add a test to better test trace_marker_raw.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20251011035243.386098147@kernel.org
Fixes: 64cf7d058a ("tracing: Have trace_marker use per-cpu data to read user space")
Reported-by: syzbot+9a2ede1643175f350105@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e973f5.050a0220.1186a4.0010.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After commit 5ab23c7923 ("modpost: Create modalias for builtin
modules"), relocatable RISC-V kernels with CONFIG_KASAN=y start failing
when attempting to strip the module device table symbols:
riscv64-linux-objcopy: not stripping symbol `__mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table' because it is named in a relocation
make[4]: *** [scripts/Makefile.vmlinux:97: vmlinux] Error 1
The relocation appears to come from .LASANLOC5 in .data.rel.local:
$ llvm-objdump --disassemble-symbols=.LASANLOC5 --disassemble-all -r drivers/irqchip/irq-starfive-jh8100-intc.o
drivers/irqchip/irq-starfive-jh8100-intc.o: file format elf64-littleriscv
Disassembly of section .data.rel.local:
0000000000000180 <.LASANLOC5>:
...
1d0: 0000 unimp
00000000000001d0: R_RISCV_64 __mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table
...
This section appears to come from GCC for including additional
information about global variables that may be protected by KASAN.
There appears to be no way to opt out of the generation of these symbols
through either a flag or attribute. Attempting to remove '.LASANLOC*'
with '--strip-symbol' results in the same error as above because these
symbols may refer to (thus have relocation between) each other.
Avoid this build breakage by switching to '--strip-unneeded-symbol' for
removing __mod_device_table__ symbols, as it will only remove the symbol
when there is no relocation pointing to it. While this may result in a
little more bloat in the symbol table in certain configurations, it is
not as bad as outright build failures.
Fixes: 5ab23c7923 ("modpost: Create modalias for builtin modules")
Reported-by: Charles Mirabile <cmirabil@redhat.com>
Closes: https://lore.kernel.org/20251007011637.2512413-1-cmirabil@redhat.com/
Suggested-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Alice Ryhl
Miguel Ojeda
Ma Ke
Dave Penkler
Shenghao Ding
Krishna Kurapati
Peter Robinson
Neil Armstrong
Christophe JAILLET
Xu Yang
Takashi Iwai
Damien Le Moal
Sourabh Jain
Nam Cao
Markus Elfring
Nicolas Dichtel
Linus Torvalds
Jakub Kicinski
Yeounsu Moon
Rex Lu
Bhanu Seshu Kumar Valluri
Wolfram Sang
Marek Vasut
Steven Rostedt
Cryolitia PukNgae
Vlastimil Babka
Stuart Hayhurst
Denis Arefev
Paul Walmsley
Nathan Chancellor
Sean Christopherson