linux-stable-mirror

mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2026-06-21 15:43:21 +02:00

Author	SHA1	Message	Date
Ilya Leoshkevich	45c709f8c7	bpf: Clear zext_dst of dead insns "access skb fields ok" verifier test fails on s390 with the "verifier bug. zext_dst is set, but no reg is defined" message. The first insns of the test prog are ... 0: 61 01 00 00 00 00 00 00 ldxw %r0,[%r1+0] 8: 35 00 00 01 00 00 00 00 jge %r0,0,1 10: 61 01 00 08 00 00 00 00 ldxw %r0,[%r1+8] ... and the 3rd one is dead (this does not look intentional to me, but this is a separate topic). sanitize_dead_code() converts dead insns into "ja -1", but keeps zext_dst. When opt_subreg_zext_lo32_rnd_hi32() tries to parse such an insn, it sees this discrepancy and bails. This problem can be seen only with JITs whose bpf_jit_needs_zext() returns true. Fix by clearning dead insns' zext_dst. The commits that contributed to this problem are: 1. `5aa5bd14c5` ("bpf: add initial suite for selftests"), which introduced the test with the dead code. 2. `5327ed3d44` ("bpf: verifier: mark verified-insn with sub-register zext flag"), which introduced the zext_dst flag. 3. `83a2881903` ("bpf: Account for BPF_FETCH in insn_has_def32()"), which introduced the sanity check. 4. `9183671af6` ("bpf: Fix leakage under speculation on mispredicted branches"), which bisect points to. It's best to fix this on stable branches that contain the second one, since that's the point where the inconsistency was introduced. Fixes: `5327ed3d44` ("bpf: verifier: mark verified-insn with sub-register zext flag") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210812151811.184086-2-iii@linux.ibm.com	2021-08-13 17:43:43 +02:00
Daniel Borkmann	2039f26f3a	bpf: Fix leakage due to insufficient speculative store bypass mitigation Spectre v4 gadgets make use of memory disambiguation, which is a set of techniques that execute memory access instructions, that is, loads and stores, out of program order; Intel's optimization manual, section 2.4.4.5: A load instruction micro-op may depend on a preceding store. Many microarchitectures block loads until all preceding store addresses are known. The memory disambiguator predicts which loads will not depend on any previous stores. When the disambiguator predicts that a load does not have such a dependency, the load takes its data from the L1 data cache. Eventually, the prediction is verified. If an actual conflict is detected, the load and all succeeding instructions are re-executed. `af86ca4e30` ("bpf: Prevent memory disambiguation attack") tried to mitigate this attack by sanitizing the memory locations through preemptive "fast" (low latency) stores of zero prior to the actual "slow" (high latency) store of a pointer value such that upon dependency misprediction the CPU then speculatively executes the load of the pointer value and retrieves the zero value instead of the attacker controlled scalar value previously stored at that location, meaning, subsequent access in the speculative domain is then redirected to the "zero page". The sanitized preemptive store of zero prior to the actual "slow" store is done through a simple ST instruction based on r10 (frame pointer) with relative offset to the stack location that the verifier has been tracking on the original used register for STX, which does not have to be r10. Thus, there are no memory dependencies for this store, since it's only using r10 and immediate constant of zero; hence `af86ca4e30` /assumed/ a low latency operation. However, a recent attack demonstrated that this mitigation is not sufficient since the preemptive store of zero could also be turned into a "slow" store and is thus bypassed as well: [...] // r2 = oob address (e.g. scalar) // r7 = pointer to map value 31: (7b) (u64 )(r10 -16) = r2 // r9 will remain "fast" register, r10 will become "slow" register below 32: (bf) r9 = r10 // JIT maps BPF reg to x86 reg: // r9 -> r15 (callee saved) // r10 -> rbp // train store forward prediction to break dependency link between both r9 // and r10 by evicting them from the predictor's LRU table. 33: (61) r0 = (u32 )(r7 +24576) 34: (63) (u32 )(r7 +29696) = r0 35: (61) r0 = (u32 )(r7 +24580) 36: (63) (u32 )(r7 +29700) = r0 37: (61) r0 = (u32 )(r7 +24584) 38: (63) (u32 )(r7 +29704) = r0 39: (61) r0 = (u32 )(r7 +24588) 40: (63) (u32 )(r7 +29708) = r0 [...] 543: (61) r0 = (u32 )(r7 +25596) 544: (63) (u32 )(r7 +30716) = r0 // prepare call to bpf_ringbuf_output() helper. the latter will cause rbp // to spill to stack memory while r13/r14/r15 (all callee saved regs) remain // in hardware registers. rbp becomes slow due to push/pop latency. below is // disasm of bpf_ringbuf_output() helper for better visual context: // // ffffffff8117ee20: 41 54 push r12 // ffffffff8117ee22: 55 push rbp // ffffffff8117ee23: 53 push rbx // ffffffff8117ee24: 48 f7 c1 fc ff ff ff test rcx,0xfffffffffffffffc // ffffffff8117ee2b: 0f 85 af 00 00 00 jne ffffffff8117eee0 <-- jump taken // [...] // ffffffff8117eee0: 49 c7 c4 ea ff ff ff mov r12,0xffffffffffffffea // ffffffff8117eee7: 5b pop rbx // ffffffff8117eee8: 5d pop rbp // ffffffff8117eee9: 4c 89 e0 mov rax,r12 // ffffffff8117eeec: 41 5c pop r12 // ffffffff8117eeee: c3 ret 545: (18) r1 = map[id:4] 547: (bf) r2 = r7 548: (b7) r3 = 0 549: (b7) r4 = 4 550: (85) call bpf_ringbuf_output#194288 // instruction 551 inserted by verifier \ 551: (7a) (u64 )(r10 -16) = 0 \| /both/ are now slow stores here // storing map value pointer r7 at fp-16 \| since value of r10 is "slow". 552: (7b) (u64 )(r10 -16) = r7 / // following "fast" read to the same memory location, but due to dependency // misprediction it will speculatively execute before insn 551/552 completes. 553: (79) r2 = (u64 )(r9 -16) // in speculative domain contains attacker controlled r2. in non-speculative // domain this contains r7, and thus accesses r7 +0 below. 554: (71) r3 = (u8 )(r2 +0) // leak r3 As can be seen, the current speculative store bypass mitigation which the verifier inserts at line 551 is insufficient since /both/, the write of the zero sanitation as well as the map value pointer are a high latency instruction due to prior memory access via push/pop of r10 (rbp) in contrast to the low latency read in line 553 as r9 (r15) which stays in hardware registers. Thus, architecturally, fp-16 is r7, however, microarchitecturally, fp-16 can still be r2. Initial thoughts to address this issue was to track spilled pointer loads from stack and enforce their load via LDX through r10 as well so that /both/ the preemptive store of zero /as well as/ the load use the /same/ register such that a dependency is created between the store and load. However, this option is not sufficient either since it can be bypassed as well under speculation. An updated attack with pointer spill/fills now _all_ based on r10 would look as follows: [...] // r2 = oob address (e.g. scalar) // r7 = pointer to map value [...] // longer store forward prediction training sequence than before. 2062: (61) r0 = (u32 )(r7 +25588) 2063: (63) (u32 )(r7 +30708) = r0 2064: (61) r0 = (u32 )(r7 +25592) 2065: (63) (u32 )(r7 +30712) = r0 2066: (61) r0 = (u32 )(r7 +25596) 2067: (63) (u32 )(r7 +30716) = r0 // store the speculative load address (scalar) this time after the store // forward prediction training. 2068: (7b) (u64 )(r10 -16) = r2 // preoccupy the CPU store port by running sequence of dummy stores. 2069: (63) (u32 )(r7 +29696) = r0 2070: (63) (u32 )(r7 +29700) = r0 2071: (63) (u32 )(r7 +29704) = r0 2072: (63) (u32 )(r7 +29708) = r0 2073: (63) (u32 )(r7 +29712) = r0 2074: (63) (u32 )(r7 +29716) = r0 2075: (63) (u32 )(r7 +29720) = r0 2076: (63) (u32 )(r7 +29724) = r0 2077: (63) (u32 )(r7 +29728) = r0 2078: (63) (u32 )(r7 +29732) = r0 2079: (63) (u32 )(r7 +29736) = r0 2080: (63) (u32 )(r7 +29740) = r0 2081: (63) (u32 )(r7 +29744) = r0 2082: (63) (u32 )(r7 +29748) = r0 2083: (63) (u32 )(r7 +29752) = r0 2084: (63) (u32 )(r7 +29756) = r0 2085: (63) (u32 )(r7 +29760) = r0 2086: (63) (u32 )(r7 +29764) = r0 2087: (63) (u32 )(r7 +29768) = r0 2088: (63) (u32 )(r7 +29772) = r0 2089: (63) (u32 )(r7 +29776) = r0 2090: (63) (u32 )(r7 +29780) = r0 2091: (63) (u32 )(r7 +29784) = r0 2092: (63) (u32 )(r7 +29788) = r0 2093: (63) (u32 )(r7 +29792) = r0 2094: (63) (u32 )(r7 +29796) = r0 2095: (63) (u32 )(r7 +29800) = r0 2096: (63) (u32 )(r7 +29804) = r0 2097: (63) (u32 )(r7 +29808) = r0 2098: (63) (u32 )(r7 +29812) = r0 // overwrite scalar with dummy pointer; same as before, also including the // sanitation store with 0 from the current mitigation by the verifier. 2099: (7a) (u64 )(r10 -16) = 0 \| /both/ are now slow stores here 2100: (7b) (u64 )(r10 -16) = r7 \| since store unit is still busy. // load from stack intended to bypass stores. 2101: (79) r2 = (u64 )(r10 -16) 2102: (71) r3 = (u8 )(r2 +0) // leak r3 [...] Looking at the CPU microarchitecture, the scheduler might issue loads (such as seen in line 2101) before stores (line 2099,2100) because the load execution units become available while the store execution unit is still busy with the sequence of dummy stores (line 2069-2098). And so the load may use the prior stored scalar from r2 at address r10 -16 for speculation. The updated attack may work less reliable on CPU microarchitectures where loads and stores share execution resources. This concludes that the sanitizing with zero stores from `af86ca4e30` ("bpf: Prevent memory disambiguation attack") is insufficient. Moreover, the detection of stack reuse from `af86ca4e30` where previously data (STACK_MISC) has been written to a given stack slot where a pointer value is now to be stored does not have sufficient coverage as precondition for the mitigation either; for several reasons outlined as follows: 1) Stack content from prior program runs could still be preserved and is therefore not "random", best example is to split a speculative store bypass attack between tail calls, program A would prepare and store the oob address at a given stack slot and then tail call into program B which does the "slow" store of a pointer to the stack with subsequent "fast" read. From program B PoV such stack slot type is STACK_INVALID, and therefore also must be subject to mitigation. 2) The STACK_SPILL must not be coupled to register_is_const(&stack->spilled_ptr) condition, for example, the previous content of that memory location could also be a pointer to map or map value. Without the fix, a speculative store bypass is not mitigated in such precondition and can then lead to a type confusion in the speculative domain leaking kernel memory near these pointer types. While brainstorming on various alternative mitigation possibilities, we also stumbled upon a retrospective from Chrome developers [0]: [...] For variant 4, we implemented a mitigation to zero the unused memory of the heap prior to allocation, which cost about 1% when done concurrently and 4% for scavenging. Variant 4 defeats everything we could think of. We explored more mitigations for variant 4 but the threat proved to be more pervasive and dangerous than we anticipated. For example, stack slots used by the register allocator in the optimizing compiler could be subject to type confusion, leading to pointer crafting. Mitigating type confusion for stack slots alone would have required a complete redesign of the backend of the optimizing compiler, perhaps man years of work, without a guarantee of completeness. [...] From BPF side, the problem space is reduced, however, options are rather limited. One idea that has been explored was to xor-obfuscate pointer spills to the BPF stack: [...] // preoccupy the CPU store port by running sequence of dummy stores. [...] 2106: (63) (u32 )(r7 +29796) = r0 2107: (63) (u32 )(r7 +29800) = r0 2108: (63) (u32 )(r7 +29804) = r0 2109: (63) (u32 )(r7 +29808) = r0 2110: (63) (u32 )(r7 +29812) = r0 // overwrite scalar with dummy pointer; xored with random 'secret' value // of 943576462 before store ... 2111: (b4) w11 = 943576462 2112: (af) r11 ^= r7 2113: (7b) (u64 )(r10 -16) = r11 2114: (79) r11 = (u64 )(r10 -16) 2115: (b4) w2 = 943576462 2116: (af) r2 ^= r11 // ... and restored with the same 'secret' value with the help of AX reg. 2117: (71) r3 = (u8 )(r2 +0) [...] While the above would not prevent speculation, it would make data leakage infeasible by directing it to random locations. In order to be effective and prevent type confusion under speculation, such random secret would have to be regenerated for each store. The additional complexity involved for a tracking mechanism that prevents jumps such that restoring spilled pointers would not get corrupted is not worth the gain for unprivileged. Hence, the fix in here eventually opted for emitting a non-public BPF_ST \| BPF_NOSPEC instruction which the x86 JIT translates into a lfence opcode. Inserting the latter in between the store and load instruction is one of the mitigations options [1]. The x86 instruction manual notes: [...] An LFENCE that follows an instruction that stores to memory might complete before the data being stored have become globally visible. [...] The latter meaning that the preceding store instruction finished execution and the store is at minimum guaranteed to be in the CPU's store queue, but it's not guaranteed to be in that CPU's L1 cache at that point (globally visible). The latter would only be guaranteed via sfence. So the load which is guaranteed to execute after the lfence for that local CPU would have to rely on store-to-load forwarding. [2], in section 2.3 on store buffers says: [...] For every store operation that is added to the ROB, an entry is allocated in the store buffer. This entry requires both the virtual and physical address of the target. Only if there is no free entry in the store buffer, the frontend stalls until there is an empty slot available in the store buffer again. Otherwise, the CPU can immediately continue adding subsequent instructions to the ROB and execute them out of order. On Intel CPUs, the store buffer has up to 56 entries. [...] One small upside on the fix is that it lifts constraints from `af86ca4e30` where the sanitize_stack_off relative to r10 must be the same when coming from different paths. The BPF_ST \| BPF_NOSPEC gets emitted after a BPF_STX or BPF_ST instruction. This happens either when we store a pointer or data value to the BPF stack for the first time, or upon later pointer spills. The former needs to be enforced since otherwise stale stack data could be leaked under speculation as outlined earlier. For non-x86 JITs the BPF_ST \| BPF_NOSPEC mapping is currently optimized away, but others could emit a speculation barrier as well if necessary. For real-world unprivileged programs e.g. generated by LLVM, pointer spill/fill is only generated upon register pressure and LLVM only tries to do that for pointers which are not used often. The program main impact will be the initial BPF_ST \| BPF_NOSPEC sanitation for the STACK_INVALID case when the first write to a stack slot occurs e.g. upon map lookup. In future we might refine ways to mitigate the latter cost. [0] https://arxiv.org/pdf/1902.05178.pdf [1] https://msrc-blog.microsoft.com/2018/05/21/analysis-and-mitigation-of-speculative-store-bypass-cve-2018-3639/ [2] https://arxiv.org/pdf/1905.05725.pdf Fixes: `af86ca4e30` ("bpf: Prevent memory disambiguation attack") Fixes: `f7cf25b202` ("bpf: track spill/fill of constants") Co-developed-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-07-29 00:27:52 +02:00
Daniel Borkmann	e042aa532c	bpf: Fix pointer arithmetic mask tightening under state pruning In `7fedb63a83` ("bpf: Tighten speculative pointer arithmetic mask") we narrowed the offset mask for unprivileged pointer arithmetic in order to mitigate a corner case where in the speculative domain it is possible to advance, for example, the map value pointer by up to value_size-1 out-of- bounds in order to leak kernel memory via side-channel to user space. The verifier's state pruning for scalars leaves one corner case open where in the first verification path R_x holds an unknown scalar with an aux->alu_limit of e.g. 7, and in a second verification path that same register R_x, here denoted as R_x', holds an unknown scalar which has tighter bounds and would thus satisfy range_within(R_x, R_x') as well as tnum_in(R_x, R_x') for state pruning, yielding an aux->alu_limit of 3: Given the second path fits the register constraints for pruning, the final generated mask from aux->alu_limit will remain at 7. While technically not wrong for the non-speculative domain, it would however be possible to craft similar cases where the mask would be too wide as in `7fedb63a83`. One way to fix it is to detect the presence of unknown scalar map pointer arithmetic and force a deeper search on unknown scalars to ensure that we do not run into a masking mismatch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-07-16 16:57:07 +02:00
Daniel Borkmann	59089a189e	bpf: Remove superfluous aux sanitation on subprog rejection Follow-up to `fe9a5ca7e3` ("bpf: Do not mark insn as seen under speculative path verification"). The sanitize_insn_aux_data() helper does not serve a particular purpose in today's code. The original intention for the helper was that if function-by-function verification fails, a given program would be cleared from temporary insn_aux_data[], and then its verification would be re-attempted in the context of the main program a second time. However, a failure in do_check_subprogs() will skip do_check_main() and propagate the error to the user instead, thus such situation can never occur. Given its interaction is not compatible to the Spectre v1 mitigation (due to comparing aux->seen with env->pass_cnt), just remove sanitize_insn_aux_data() to avoid future bugs in this area. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-07-16 16:57:07 +02:00
Daniel Borkmann	5dd0a6b858	bpf: Fix tail_call_reachable rejection for interpreter when jit failed During testing of `f263a81451` ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from `e411901c0b` ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit `ebf7d1f508` ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's func[i]->aux->tail_call_reachable. However, in the case of the rejection check upon JIT failure, env->prog->aux->tail_call_reachable is used. func[0]->aux->tail_call_reachable which represents the main program's information did not propagate this to the outer env->prog->aux, though. Add this propagation into check_max_stack_depth() where it needs to belong so that the check can be done reliably. Fixes: `ebf7d1f508` ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Fixes: `e411901c0b` ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") Co-developed-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/618c34e3163ad1a36b1e82377576a6081e182f25.1626123173.git.daniel@iogearbox.net	2021-07-13 08:19:13 -07:00
John Fastabend	f263a81451	bpf: Track subprog poke descriptors correctly and fix use-after-free Subprograms are calling map_poke_track(), but on program release there is no hook to call map_poke_untrack(). However, on program release, the aux memory (and poke descriptor table) is freed even though we still have a reference to it in the element list of the map aux data. When we run map_poke_run(), we then end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run(): [...] [ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e [ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337 [ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399 [ 402.824715] Call Trace: [ 402.824719] dump_stack+0x93/0xc2 [ 402.824727] print_address_description.constprop.0+0x1a/0x140 [ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824744] kasan_report.cold+0x7c/0xd8 [ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824757] prog_array_map_poke_run+0xc2/0x34e [ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0 [...] The elements concerned are walked as follows: for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; [...] The access to size_poke_tab is a 4 byte read, verified by checking offsets in the KASAN dump: [ 402.825004] The buggy address belongs to the object at ffff8881905a7800 which belongs to the cache kmalloc-1k of size 1024 [ 402.825008] The buggy address is located 320 bytes inside of 1024-byte region [ffff8881905a7800, ffff8881905a7c00) The pahole output of bpf_prog_aux: struct bpf_prog_aux { [...] /* --- cacheline 5 boundary (320 bytes) --- / u32 size_poke_tab; / 320 4 */ [...] In general, subprograms do not necessarily manage their own data structures. For example, BTF func_info and linfo are just pointers to the main program structure. This allows reference counting and cleanup to be done on the latter which simplifies their management a bit. The aux->poke_tab struct, however, did not follow this logic. The initial proposed fix for this use-after-free bug further embedded poke data tracking into the subprogram with proper reference counting. However, Daniel and Alexei questioned why we were treating these objects special; I agree, its unnecessary. The fix here removes the per subprogram poke table allocation and map tracking and instead simply points the aux->poke_tab pointer at the main programs poke table. This way, map tracking is simplified to the main program and we do not need to manage them per subprogram. This also means, bpf_prog_free_deferred(), which unwinds the program reference counting and kfrees objects, needs to ensure that we don't try to double free the poke_tab when free'ing the subprog structures. This is easily solved by NULL'ing the poke_tab pointer. The second detail is to ensure that per subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do this, we add a pointer in the poke structure to point at the subprogram value so JITs can easily check while walking the poke_tab structure if the current entry belongs to the current program. The aux pointer is stable and therefore suitable for such comparison. On the jit_subprogs() error path, we omit cleaning up the poke->aux field because these are only ever referenced from the JIT side, but on error we will never make it to the JIT, so its fine to leave them dangling. Removing these pointers would complicate the error path for no reason. However, we do need to untrack all poke descriptors from the main program as otherwise they could race with the freeing of JIT memory from the subprograms. Lastly, `a748c6975d` ("bpf: propagate poke descriptors to subprograms") had an off-by-one on the subprogram instruction index range check as it was testing 'insn_idx >= subprog_start && insn_idx <= subprog_end'. However, subprog_end is the next subprogram's start instruction. Fixes: `a748c6975d` ("bpf: propagate poke descriptors to subprograms") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210707223848.14580-2-john.fastabend@gmail.com	2021-07-09 12:08:27 +02:00
Jakub Kicinski	b6df00789e	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2021-06-29 15:45:27 -07:00
John Fastabend	7506d211b9	bpf: Fix null ptr deref with mixed tail calls and subprogs The sub-programs prog->aux->poke_tab[] is populated in jit_subprogs() and then used when emitting 'BPF_JMP\|BPF_TAIL_CALL' insn->code from the individual JITs. The poke_tab[] to use is stored in the insn->imm by the code adding it to that array slot. The JIT then uses imm to find the right entry for an individual instruction. In the x86 bpf_jit_comp.c this is done by calling emit_bpf_tail_call_direct with the poke_tab[] of the imm value. However, we observed the below null-ptr-deref when mixing tail call programs with subprog programs. For this to happen we just need to mix bpf-2-bpf calls and tailcalls with some extra calls or instructions that would be patched later by one of the fixup routines. So whats happening? Before the fixup_call_args() -- where the jit op is done -- various code patching is done by do_misc_fixups(). This may increase the insn count, for example when we patch map_lookup_up using map_gen_lookup hook. This does two things. First, it means the instruction index, insn_idx field, of a tail call instruction will move by a 'delta'. In verifier code, struct bpf_jit_poke_descriptor desc = { .reason = BPF_POKE_REASON_TAIL_CALL, .tail_call.map = BPF_MAP_PTR(aux->map_ptr_state), .tail_call.key = bpf_map_key_immediate(aux), .insn_idx = i + delta, }; Then subprog start values subprog_info[i].start will be updated with the delta and any poke descriptor index will also be updated with the delta in adjust_poke_desc(). If we look at the adjust subprog starts though we see its only adjusted when the delta occurs before the new instructions, /* NOTE: fake 'exit' subprog should be updated as well. */ for (i = 0; i <= env->subprog_cnt; i++) { if (env->subprog_info[i].start <= off) continue; Earlier subprograms are not changed because their start values are not moved. But, adjust_poke_desc() does the offset + delta indiscriminately. The result is poke descriptors are potentially corrupted. Then in jit_subprogs() we only populate the poke_tab[] when the above insn_idx is less than the next subprogram start. From above we corrupted our insn_idx so we might incorrectly assume a poke descriptor is not used in a subprogram omitting it from the subprogram. And finally when the jit runs it does the deref of poke_tab when emitting the instruction and crashes with below. Because earlier step omitted the poke descriptor. The fix is straight forward with above context. Simply move same logic from adjust_subprog_starts() into adjust_poke_descs() and only adjust insn_idx when needed. [ 82.396354] bpf_testmod: version magic '5.12.0-rc2alu+ SMP preempt mod_unload ' should be '5.12.0+ SMP preempt mod_unload ' [ 82.623001] loop10: detected capacity change from 0 to 8 [ 88.487424] ================================================================== [ 88.487438] BUG: KASAN: null-ptr-deref in do_jit+0x184a/0x3290 [ 88.487455] Write of size 8 at addr 0000000000000008 by task test_progs/5295 [ 88.487471] CPU: 7 PID: 5295 Comm: test_progs Tainted: G I 5.12.0+ #386 [ 88.487483] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019 [ 88.487490] Call Trace: [ 88.487498] dump_stack+0x93/0xc2 [ 88.487515] kasan_report.cold+0x5f/0xd8 [ 88.487530] ? do_jit+0x184a/0x3290 [ 88.487542] do_jit+0x184a/0x3290 ... [ 88.487709] bpf_int_jit_compile+0x248/0x810 ... [ 88.487765] bpf_check+0x3718/0x5140 ... [ 88.487920] bpf_prog_load+0xa22/0xf10 Fixes: `a748c6975d` ("bpf: propagate poke descriptors to subprograms") Reported-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>	2021-06-22 14:46:39 -07:00
Jakub Kicinski	adc2e56ebe	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2021-06-18 19:47:02 -07:00
David S. Miller	a52171ae7b	Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-17 The following pull-request contains BPF updates for your net-next tree. We've added 50 non-merge commits during the last 25 day(s) which contain a total of 148 files changed, 4779 insertions(+), 1248 deletions(-). The main changes are: 1) BPF infrastructure to migrate TCP child sockets from a listener to another in the same reuseport group/map, from Kuniyuki Iwashima. 2) Add a provably sound, faster and more precise algorithm for tnum_mul() as noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan. 3) Streamline error reporting changes in libbpf as planned out in the 'libbpf: the road to v1.0' effort, from Andrii Nakryiko. 4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu. 5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek. 6) Support new LLVM relocations in libbpf to make them more linker friendly, also add a doc to describe the BPF backend relocations, from Yonghong Song. 7) Silence long standing KUBSAN complaints on register-based shifts in interpreter, from Daniel Borkmann and Eric Biggers. 8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when target arch cannot be determined, from Lorenz Bauer. 9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson. 10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi. 11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF programs to bpf_helpers.h header, from Florent Revest. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>	2021-06-17 11:54:56 -07:00
Daniel Borkmann	9183671af6	bpf: Fix leakage under speculation on mispredicted branches The verifier only enumerates valid control-flow paths and skips paths that are unreachable in the non-speculative domain. And so it can miss issues under speculative execution on mispredicted branches. For example, a type confusion has been demonstrated with the following crafted program: // r0 = pointer to a map array entry // r6 = pointer to readable stack slot // r9 = scalar controlled by attacker 1: r0 = (u64 )(r0) // cache miss 2: if r0 != 0x0 goto line 4 3: r6 = r9 4: if r0 != 0x1 goto line 6 5: r9 = (u8 )(r6) 6: // leak r9 Since line 3 runs iff r0 == 0 and line 5 runs iff r0 == 1, the verifier concludes that the pointer dereference on line 5 is safe. But: if the attacker trains both the branches to fall-through, such that the following is speculatively executed ... r6 = r9 r9 = (u8 )(r6) // leak r9 ... then the program will dereference an attacker-controlled value and could leak its content under speculative execution via side-channel. This requires to mistrain the branch predictor, which can be rather tricky, because the branches are mutually exclusive. However such training can be done at congruent addresses in user space using different branches that are not mutually exclusive. That is, by training branches in user space ... A: if r0 != 0x0 goto line C B: ... C: if r0 != 0x0 goto line D D: ... ... such that addresses A and C collide to the same CPU branch prediction entries in the PHT (pattern history table) as those of the BPF program's lines 2 and 4, respectively. A non-privileged attacker could simply brute force such collisions in the PHT until observing the attack succeeding. Alternative methods to mistrain the branch predictor are also possible that avoid brute forcing the collisions in the PHT. A reliable attack has been demonstrated, for example, using the following crafted program: // r0 = pointer to a [control] map array entry // r7 = (u64 )(r0 + 0), training/attack phase // r8 = (u64 )(r0 + 8), oob address // [...] // r0 = pointer to a [data] map array entry 1: if r7 == 0x3 goto line 3 2: r8 = r0 // crafted sequence of conditional jumps to separate the conditional // branch in line 193 from the current execution flow 3: if r0 != 0x0 goto line 5 4: if r0 == 0x0 goto exit 5: if r0 != 0x0 goto line 7 6: if r0 == 0x0 goto exit [...] 187: if r0 != 0x0 goto line 189 188: if r0 == 0x0 goto exit // load any slowly-loaded value (due to cache miss in phase 3) ... 189: r3 = (u64 )(r0 + 0x1200) // ... and turn it into known zero for verifier, while preserving slowly- // loaded dependency when executing: 190: r3 &= 1 191: r3 &= 2 // speculatively bypassed phase dependency 192: r7 += r3 193: if r7 == 0x3 goto exit 194: r4 = (u8 )(r8 + 0) // leak r4 As can be seen, in training phase (phase != 0x3), the condition in line 1 turns into false and therefore r8 with the oob address is overridden with the valid map value address, which in line 194 we can read out without issues. However, in attack phase, line 2 is skipped, and due to the cache miss in line 189 where the map value is (zeroed and later) added to the phase register, the condition in line 193 takes the fall-through path due to prior branch predictor training, where under speculation, it'll load the byte at oob address r8 (unknown scalar type at that point) which could then be leaked via side-channel. One way to mitigate these is to 'branch off' an unreachable path, meaning, the current verification path keeps following the is_branch_taken() path and we push the other branch to the verification stack. Given this is unreachable from the non-speculative domain, this branch's vstate is explicitly marked as speculative. This is needed for two reasons: i) if this path is solely seen from speculative execution, then we later on still want the dead code elimination to kick in in order to sanitize these instructions with jmp-1s, and ii) to ensure that paths walked in the non-speculative domain are not pruned from earlier walks of paths walked in the speculative domain. Additionally, for robustness, we mark the registers which have been part of the conditional as unknown in the speculative path given there should be no assumptions made on their content. The fix in here mitigates type confusion attacks described earlier due to i) all code paths in the BPF program being explored and ii) existing verifier logic already ensuring that given memory access instruction references one specific data structure. An alternative to this fix that has also been looked at in this scope was to mark aux->alu_state at the jump instruction with a BPF_JMP_TAKEN state as well as direction encoding (always-goto, always-fallthrough, unknown), such that mixing of different always-* directions themselves as well as mixing of always-* with unknown directions would cause a program rejection by the verifier, e.g. programs with constructs like 'if ([...]) { x = 0; } else { x = 1; }' with subsequent 'if (x == 1) { [...] }'. For unprivileged, this would result in only single direction always-* taken paths, and unknown taken paths being allowed, such that the former could be patched from a conditional jump to an unconditional jump (ja). Compared to this approach here, it would have two downsides: i) valid programs that otherwise are not performing any pointer arithmetic, etc, would potentially be rejected/broken, and ii) we are required to turn off path pruning for unprivileged, where both can be avoided in this work through pushing the invalid branch to the verification stack. The issue was originally discovered by Adam and Ofek, and later independently discovered and reported as a result of Benedict and Piotr's research work. Fixes: `b2157399cc` ("bpf: prevent out-of-bounds speculation") Reported-by: Adam Morrison <mad@cs.tau.ac.il> Reported-by: Ofek Kirzner <ofekkir@gmail.com> Reported-by: Benedict Schlueter <benedict.schlueter@rub.de> Reported-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Benedict Schlueter <benedict.schlueter@rub.de> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-06-14 23:06:10 +02:00
Daniel Borkmann	fe9a5ca7e3	bpf: Do not mark insn as seen under speculative path verification ... in such circumstances, we do not want to mark the instruction as seen given the goal is still to jmp-1 rewrite/sanitize dead code, if it is not reachable from the non-speculative path verification. We do however want to verify it for safety regardless. With the patch as-is all the insns that have been marked as seen before the patch will also be marked as seen after the patch (just with a potentially different non-zero count). An upcoming patch will also verify paths that are unreachable in the non-speculative domain, hence this extension is needed. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Benedict Schlueter <benedict.schlueter@rub.de> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-06-14 23:06:06 +02:00
Daniel Borkmann	d203b0fd86	bpf: Inherit expanded/patched seen count from old aux data Instead of relying on current env->pass_cnt, use the seen count from the old aux data in adjust_insn_aux_data(), and expand it to the new range of patched instructions. This change is valid given we always expand 1:n with n>=1, so what applies to the old/original instruction needs to apply for the replacement as well. Not relying on env->pass_cnt is a prerequisite for a later change where we want to avoid marking an instruction seen when verified under speculative execution path. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Benedict Schlueter <benedict.schlueter@rub.de> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-06-14 23:06:00 +02:00
Jakub Kicinski	5ada57a9a6	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2021-05-27 09:55:10 -07:00
Daniel Borkmann	a703619127	bpf: No need to simulate speculative domain for immediates In `801c6058d1` ("bpf: Fix leakage of uninitialized bpf stack under speculation") we replaced masking logic with direct loads of immediates if the register is a known constant. Given in this case we do not apply any masking, there is also no reason for the operation to be truncated under the speculative domain. Therefore, there is also zero reason for the verifier to branch-off and simulate this case, it only needs to do it for unknown but bounded scalars. As a side-effect, this also enables few test cases that were previously rejected due to simulation under zero truncation. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-05-25 22:08:53 +02:00
Daniel Borkmann	bb01a1bba5	bpf: Fix mask direction swap upon off reg sign change Masking direction as indicated via mask_to_left is considered to be calculated once and then used to derive pointer limits. Thus, this needs to be placed into bpf_sanitize_info instead so we can pass it to sanitize_ptr_alu() call after the pointer move. Piotr noticed a corner case where the off reg causes masking direction change which then results in an incorrect final aux->alu_limit. Fixes: `7fedb63a83` ("bpf: Tighten speculative pointer arithmetic mask") Reported-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-05-25 22:08:53 +02:00
Daniel Borkmann	3d0220f686	bpf: Wrap aux data inside bpf_sanitize_info container Add a container structure struct bpf_sanitize_info which holds the current aux info, and update call-sites to sanitize_ptr_alu() to pass it in. This is needed for passing in additional state later on. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-05-25 22:08:53 +02:00
Zhen Lei	8fb33b6055	bpf: Fix spelling mistakes Fix some spelling mistakes in comments: aother ==> another Netiher ==> Neither desribe ==> describe intializing ==> initializing funciton ==> function wont ==> won't and move the word 'the' at the end to the next line accross ==> across pathes ==> paths triggerred ==> triggered excute ==> execute ether ==> either conervative ==> conservative convetion ==> convention markes ==> marks interpeter ==> interpreter Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210525025659.8898-2-thunder.leizhen@huawei.com	2021-05-24 21:13:05 -07:00
Yinjun Zhang	ceb11679d9	bpf, offload: Reorder offload callback 'prepare' in verifier Commit `4976b718c3` ("bpf: Introduce pseudo_btf_id") switched the order of resolve_pseudo_ldimm(), in which some pseudo instructions are rewritten. Thus those rewritten instructions cannot be passed to driver via 'prepare' offload callback. Reorder the 'prepare' offload callback to fix it. Fixes: `4976b718c3` ("bpf: Introduce pseudo_btf_id") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210520085834.15023-1-simon.horman@netronome.com	2021-05-20 23:51:52 +02:00
Alexei Starovoitov	387544bfa2	bpf: Introduce fd_idx Typical program loading sequence involves creating bpf maps and applying map FDs into bpf instructions in various places in the bpf program. This job is done by libbpf that is using compiler generated ELF relocations to patch certain instruction after maps are created and BTFs are loaded. The goal of fd_idx is to allow bpf instructions to stay immutable after compilation. At load time the libbpf would still create maps as usual, but it wouldn't need to patch instructions. It would store map_fds into __u32 fd_array[] and would pass that pointer to sys_bpf(BPF_PROG_LOAD). Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210514003623.28033-9-alexei.starovoitov@gmail.com	2021-05-19 00:33:40 +02:00
Alexei Starovoitov	af2ac3e13e	bpf: Prepare bpf syscall to be used from kernel and user space. With the help from bpfptr_t prepare relevant bpf syscall commands to be used from kernel and user space. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210514003623.28033-4-alexei.starovoitov@gmail.com	2021-05-19 00:33:40 +02:00
Alexei Starovoitov	79a7f8bdb1	bpf: Introduce bpf_sys_bpf() helper and program type. Add placeholders for bpf_sys_bpf() helper and new program type. Make sure to check that expected_attach_type is zero for future extensibility. Allow tracing helper functions to be used in this program type, since they will only execute from user context via bpf_prog_test_run. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210514003623.28033-2-alexei.starovoitov@gmail.com	2021-05-19 00:33:39 +02:00
Jiri Olsa	35e3815fa8	bpf: Add deny list of btf ids check for tracing programs The recursion check in __bpf_prog_enter and __bpf_prog_exit leaves some (not inlined) functions unprotected: In __bpf_prog_enter: - migrate_disable is called before prog->active is checked In __bpf_prog_exit: - migrate_enable,rcu_read_unlock_strict are called after prog->active is decreased When attaching trampoline to them we get panic like: traps: PANIC: double fault, error_code: 0x0 double fault: 0000 [#1] SMP PTI RIP: 0010:__bpf_prog_enter+0x4/0x50 ... Call Trace: <IRQ> bpf_trampoline_6442466513_0+0x18/0x1000 migrate_disable+0x5/0x50 __bpf_prog_enter+0x9/0x50 bpf_trampoline_6442466513_0+0x18/0x1000 migrate_disable+0x5/0x50 __bpf_prog_enter+0x9/0x50 bpf_trampoline_6442466513_0+0x18/0x1000 migrate_disable+0x5/0x50 __bpf_prog_enter+0x9/0x50 bpf_trampoline_6442466513_0+0x18/0x1000 migrate_disable+0x5/0x50 ... Fixing this by adding deny list of btf ids for tracing programs and checking btf id during program verification. Adding above functions to this list. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210429114712.43783-1-jolsa@kernel.org	2021-05-11 14:00:53 -07:00
Daniel Borkmann	049c4e1371	bpf: Fix alu32 const subreg bound tracking on bitwise operations Fix a bug in the verifier's scalar32_min_max_() functions which leads to incorrect tracking of 32 bit bounds for the simulation of and/or/xor bitops. When both the src & dst subreg is a known constant, then the assumption is that scalar_min_max_() will take care to update bounds correctly. However, this is not the case, for example, consider a register R2 which has a tnum of 0xffffffff00000000, meaning, lower 32 bits are known constant and in this case of value 0x00000001. R2 is then and'ed with a register R3 which is a 64 bit known constant, here, 0x100000002. What can be seen in line '10:' is that 32 bit bounds reach an invalid state where {u,s}32_min_value > {u,s}32_max_value. The reason is scalar32_min_max_() delegates 32 bit bounds updates to scalar_min_max_(), however, that really only takes place when both the 64 bit src & dst register is a known constant. Given scalar32_min_max_() is intended to be designed as closely as possible to scalar_min_max_(), update the 32 bit bounds in this situation through __mark_reg32_known() which will set all {u,s}32_{min,max}_value to the correct constant, which is 0x00000000 after the fix (given 0x00000001 & 0x00000002 in 32 bit space). This is possible given var32_off already holds the final value as dst_reg->var_off is updated before calling scalar32_min_max_*(). Before fix, invalid tracking of R2: [...] 9: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=-9223372036854775807 (0x8000000000000001),smax_value=9223372032559808513 (0x7fffffff00000001),umin_value=1,umax_value=0xffffffff00000001,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_min_value=1,u32_max_value=1) R3_w=inv4294967298 R10=fp0 9: (5f) r2 &= r3 10: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=0,smax_value=4294967296 (0x100000000),umin_value=0,umax_value=0x100000000,var_off=(0x0; 0x100000000),s32_min_value=1,s32_max_value=0,u32_min_value=1,u32_max_value=0) R3_w=inv4294967298 R10=fp0 [...] After fix, correct tracking of R2: [...] 9: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=-9223372036854775807 (0x8000000000000001),smax_value=9223372032559808513 (0x7fffffff00000001),umin_value=1,umax_value=0xffffffff00000001,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_min_value=1,u32_max_value=1) R3_w=inv4294967298 R10=fp0 9: (5f) r2 &= r3 10: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=0,smax_value=4294967296 (0x100000000),umin_value=0,umax_value=0x100000000,var_off=(0x0; 0x100000000),s32_min_value=0,s32_max_value=0,u32_min_value=0,u32_max_value=0) R3_w=inv4294967298 R10=fp0 [...] Fixes: `3f50f132d8` ("bpf: Verifier, do explicit ALU32 bounds tracking") Fixes: `2921c90d47` ("bpf: Fix a verifier failure with xor") Reported-by: Manfred Paul (@_manfp) Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-05-11 08:55:53 +02:00
Lorenz Bauer	c9e73e3d2b	bpf: verifier: Allocate idmap scratch in verifier env func_states_equal makes a very short lived allocation for idmap, probably because it's too large to fit on the stack. However the function is called quite often, leading to a lot of alloc / free churn. Replace the temporary allocation with dedicated scratch space in struct bpf_verifier_env. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/bpf/20210429134656.122225-4-lmb@cloudflare.com	2021-05-10 16:13:01 -07:00
Lorenz Bauer	06ab6a5055	bpf: verifier: Use copy_array for jmp_history Eliminate a couple needless kfree / kmalloc cycles by using copy_array for jmp_history. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210429134656.122225-3-lmb@cloudflare.com	2021-05-10 16:13:01 -07:00
Lorenz Bauer	c69431aab6	bpf: verifier: Improve function state reallocation Resizing and copying stack and reference tracking state currently does a lot of kfree / kmalloc when the size of the tracked set changes. The logic in copy__state and realloc__state is also hard to follow. Refactor this into two core functions. copy_array copies from a source into a destination. It avoids reallocation by taking the allocated size of the destination into account via ksize(). The function is essentially krealloc_array, with the difference that the contents of dst are not preserved. realloc_array changes the size of an array and zeroes newly allocated items. Contrary to krealloc both functions don't free the destination if the size is zero. Instead we rely on free_func_state to clean up. realloc_stack_state is renamed to grow_stack_state to better convey that it never shrinks the stack state. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210429134656.122225-2-lmb@cloudflare.com	2021-05-10 16:13:01 -07:00
Daniel Borkmann	801c6058d1	bpf: Fix leakage of uninitialized bpf stack under speculation The current implemented mechanisms to mitigate data disclosure under speculation mainly address stack and map value oob access from the speculative domain. However, Piotr discovered that uninitialized BPF stack is not protected yet, and thus old data from the kernel stack, potentially including addresses of kernel structures, could still be extracted from that 512 bytes large window. The BPF stack is special compared to map values since it's not zero initialized for every program invocation, whereas map values /are/ zero initialized upon their initial allocation and thus cannot leak any prior data in either domain. In the non-speculative domain, the verifier ensures that every stack slot read must have a prior stack slot write by the BPF program to avoid such data leaking issue. However, this is not enough: for example, when the pointer arithmetic operation moves the stack pointer from the last valid stack offset to the first valid offset, the sanitation logic allows for any intermediate offsets during speculative execution, which could then be used to extract any restricted stack content via side-channel. Given for unprivileged stack pointer arithmetic the use of unknown but bounded scalars is generally forbidden, we can simply turn the register-based arithmetic operation into an immediate-based arithmetic operation without the need for masking. This also gives the benefit of reducing the needed instructions for the operation. Given after the work in `7fedb63a83` ("bpf: Tighten speculative pointer arithmetic mask"), the aux->alu_limit already holds the final immediate value for the offset register with the known scalar. Thus, a simple mov of the immediate to AX register with using AX as the source for the original instruction is sufficient and possible now in this case. Reported-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-05-03 11:56:23 +02:00
Daniel Borkmann	b9b34ddbe2	bpf: Fix masking negation logic upon negative dst register The negation logic for the case where the off_reg is sitting in the dst register is not correct given then we cannot just invert the add to a sub or vice versa. As a fix, perform the final bitwise and-op unconditionally into AX from the off_reg, then move the pointer from the src to dst and finally use AX as the source for the original pointer arithmetic operation such that the inversion yields a correct result. The single non-AX mov in between is possible given constant blinding is retaining it as it's not an immediate based operation. Fixes: `979d63d50c` ("bpf: prevent out of bounds speculation on pointer arithmetic") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-05-03 11:56:16 +02:00
Florent Revest	48cac3f4a9	bpf: Implement formatted output helpers with bstr_printf BPF has three formatted output helpers: bpf_trace_printk, bpf_seq_printf and bpf_snprintf. Their signatures specify that all arguments are provided from the BPF world as u64s (in an array or as registers). All of these helpers are currently implemented by calling functions such as snprintf() whose signatures take a variable number of arguments, then placed in a va_list by the compiler to call vsnprintf(). "d9c9e4db bpf: Factorize bpf_trace_printk and bpf_seq_printf" introduced a bpf_printf_prepare function that fills an array of u64 sanitized arguments with an array of "modifiers" which indicate what the "real" size of each argument should be (given by the format specifier). The BPF_CAST_FMT_ARG macro consumes these arrays and casts each argument to its real size. However, the C promotion rules implicitely cast them all back to u64s. Therefore, the arguments given to snprintf are u64s and the va_list constructed by the compiler will use 64 bits for each argument. On 64 bit machines, this happens to work well because 32 bit arguments in va_lists need to occupy 64 bits anyway, but on 32 bit architectures this breaks the layout of the va_list expected by the called function and mangles values. In "88a5c690b6 bpf: fix bpf_trace_printk on 32 bit archs", this problem had been solved for bpf_trace_printk only with a "horrid workaround" that emitted multiple calls to trace_printk where each call had different argument types and generated different va_list layouts. One of the call would be dynamically chosen at runtime. This was ok with the 3 arguments that bpf_trace_printk takes but bpf_seq_printf and bpf_snprintf accept up to 12 arguments. Because this approach scales code exponentially, it is not a viable option anymore. Because the promotion rules are part of the language and because the construction of a va_list is an arch-specific ABI, it's best to just avoid variadic arguments and va_lists altogether. Thankfully the kernel's snprintf() has an alternative in the form of bstr_printf() that accepts arguments in a "binary buffer representation". These binary buffers are currently created by vbin_printf and used in the tracing subsystem to split the cost of printing into two parts: a fast one that only dereferences and remembers values, and a slower one, called later, that does the pretty-printing. This patch refactors bpf_printf_prepare to construct binary buffers of arguments consumable by bstr_printf() instead of arrays of arguments and modifiers. This gets rid of BPF_CAST_FMT_ARG and greatly simplifies the bpf_printf_prepare usage but there are a few gotchas that change how bpf_printf_prepare needs to do things. Currently, bpf_printf_prepare uses a per cpu temporary buffer as a generic storage for strings and IP addresses. With this refactoring, the temporary buffers now holds all the arguments in a structured binary format. To comply with the format expected by bstr_printf, certain format specifiers also need to be pre-formatted: %pB and %pi6/%pi4/%pI4/%pI6. Because vsnprintf subroutines for these specifiers are hard to expose, we pre-format these arguments with calls to snprintf(). Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210427174313.860948-3-revest@chromium.org	2021-04-27 15:56:31 -07:00
Daniel Borkmann	10bf4e8316	bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds Similarly as `b02709587e` ("bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds."), we also need to fix the propagation of 32 bit unsigned bounds from 64 bit counterparts. That is, really only set the u32_{min,max}_value when /both/ {umin,umax}_value safely fit in 32 bit space. For example, the register with a umin_value == 1 does /not/ imply that u32_min_value is also equal to 1, since umax_value could be much larger than 32 bit subregister can hold, and thus u32_min_value is in the interval [0,1] instead. Before fix, invalid tracking result of R2_w=inv1: [...] 5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0 5: (35) if r2 >= 0x1 goto pc+1 [...] // goto path 7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0 7: (b6) if w2 <= 0x1 goto pc+1 [...] // goto path 9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smin_value=-9223372036854775807,smax_value=9223372032559808513,umin_value=1,umax_value=18446744069414584321,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_max_value=1) R10=fp0 9: (bc) w2 = w2 10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv1 R10=fp0 [...] After fix, correct tracking result of R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)): [...] 5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0 5: (35) if r2 >= 0x1 goto pc+1 [...] // goto path 7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0 7: (b6) if w2 <= 0x1 goto pc+1 [...] // goto path 9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smax_value=9223372032559808513,umax_value=18446744069414584321,var_off=(0x0; 0xffffffff00000001),s32_min_value=0,s32_max_value=1,u32_max_value=1) R10=fp0 9: (bc) w2 = w2 10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)) R10=fp0 [...] Thus, same issue as in `b02709587e` holds for unsigned subregister tracking. Also, align __reg64_bound_u32() similarly to __reg64_bound_s32() as done in `b02709587e` to make them uniform again. Fixes: `3f50f132d8` ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Manfred Paul (@_manfp) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-04-27 17:13:49 +02:00
David S. Miller	5f6c2f536d	Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-04-23 The following pull-request contains BPF updates for your net-next tree. We've added 69 non-merge commits during the last 22 day(s) which contain a total of 69 files changed, 3141 insertions(+), 866 deletions(-). The main changes are: 1) Add BPF static linker support for extern resolution of global, from Andrii. 2) Refine retval for bpf_get_task_stack helper, from Dave. 3) Add a bpf_snprintf helper, from Florent. 4) A bunch of miscellaneous improvements from many developers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>	2021-04-25 18:02:32 -07:00
Florent Revest	a8fad73e33	bpf: Remove unnecessary map checks for ARG_PTR_TO_CONST_STR reg->type is enforced by check_reg_type() and map should never be NULL (it would already have been dereferenced anyway) so these checks are unnecessary. Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210422235543.4007694-3-revest@chromium.org	2021-04-23 09:58:21 -07:00
Florent Revest	8e8ee109b0	bpf: Notify user if we ever hit a bpf_snprintf verifier bug In check_bpf_snprintf_call(), a map_direct_value_addr() of the fmt map should never fail because it has already been checked by ARG_PTR_TO_CONST_STR. But if it ever fails, it's better to error out with an explicit debug message rather than silently fail. Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210422235543.4007694-2-revest@chromium.org	2021-04-23 09:58:21 -07:00
Dave Marchevsky	fd0b88f73f	bpf: Refine retval for bpf_get_task_stack helper Verifier can constrain the min/max bounds of bpf_get_task_stack's return value more tightly than the default tnum_unknown. Like bpf_get_stack, return value is num bytes written into a caller-supplied buf, or error, so do_refine_retval_range will work. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210416204704.2816874-2-davemarchevsky@fb.com	2021-04-19 18:23:33 -07:00
Florent Revest	7b15523a98	bpf: Add a bpf_snprintf helper The implementation takes inspiration from the existing bpf_trace_printk helper but there are a few differences: To allow for a large number of format-specifiers, parameters are provided in an array, like in bpf_seq_printf. Because the output string takes two arguments and the array of parameters also takes two arguments, the format string needs to fit in one argument. Thankfully, ARG_PTR_TO_CONST_STR is guaranteed to point to a zero-terminated read-only map so we don't need a format string length arg. Because the format-string is known at verification time, we also do a first pass of format string validation in the verifier logic. This makes debugging easier. Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210419155243.1632274-4-revest@chromium.org	2021-04-19 15:27:36 -07:00
Florent Revest	fff13c4bb6	bpf: Add a ARG_PTR_TO_CONST_STR argument type This type provides the guarantee that an argument is going to be a const pointer to somewhere in a read-only map value. It also checks that this pointer is followed by a zero character before the end of the map value. Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210419155243.1632274-3-revest@chromium.org	2021-04-19 15:27:36 -07:00
Jakub Kicinski	8203c7ce4e	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2021-04-17 11:08:07 -07:00
Daniel Borkmann	7fedb63a83	bpf: Tighten speculative pointer arithmetic mask This work tightens the offset mask we use for unprivileged pointer arithmetic in order to mitigate a corner case reported by Piotr and Benedict where in the speculative domain it is possible to advance, for example, the map value pointer by up to value_size-1 out-of-bounds in order to leak kernel memory via side-channel to user space. Before this change, the computed ptr_limit for retrieve_ptr_limit() helper represents largest valid distance when moving pointer to the right or left which is then fed as aux->alu_limit to generate masking instructions against the offset register. After the change, the derived aux->alu_limit represents the largest potential value of the offset register which we mask against which is just a narrower subset of the former limit. For minimal complexity, we call sanitize_ptr_alu() from 2 observation points in adjust_ptr_min_max_vals(), that is, before and after the simulated alu operation. In the first step, we retieve the alu_state and alu_limit before the operation as well as we branch-off a verifier path and push it to the verification stack as we did before which checks the dst_reg under truncation, in other words, when the speculative domain would attempt to move the pointer out-of-bounds. In the second step, we retrieve the new alu_limit and calculate the absolute distance between both. Moreover, we commit the alu_state and final alu_limit via update_alu_sanitation_state() to the env's instruction aux data, and bail out from there if there is a mismatch due to coming from different verification paths with different states. Reported-by: Piotr Krysiuk <piotras@gmail.com> Reported-by: Benedict Schlueter <benedict.schlueter@rub.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Benedict Schlueter <benedict.schlueter@rub.de>	2021-04-16 23:52:01 +02:00
Daniel Borkmann	f528819334	bpf: Move sanitize_val_alu out of op switch Add a small sanitize_needed() helper function and move sanitize_val_alu() out of the main opcode switch. In upcoming work, we'll move sanitize_ptr_alu() as well out of its opcode switch so this helps to streamline both. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-04-16 23:51:57 +02:00
Daniel Borkmann	073815b756	bpf: Refactor and streamline bounds check into helper Move the bounds check in adjust_ptr_min_max_vals() into a small helper named sanitize_check_bounds() in order to simplify the former a bit. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-04-16 23:51:54 +02:00
Daniel Borkmann	a6aaece00a	bpf: Improve verifier error messages for users Consolidate all error handling and provide more user-friendly error messages from sanitize_ptr_alu() and sanitize_val_alu(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-04-16 23:51:48 +02:00
Daniel Borkmann	b658bbb844	bpf: Rework ptr_limit into alu_limit and add common error path Small refactor with no semantic changes in order to consolidate the max ptr_limit boundary check. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-04-16 23:51:43 +02:00
Daniel Borkmann	24c109bb15	bpf: Ensure off_reg has no mixed signed bounds for all types The mixed signed bounds check really belongs into retrieve_ptr_limit() instead of outside of it in adjust_ptr_min_max_vals(). The reason is that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer types that we handle in retrieve_ptr_limit() and given errors from the latter propagate back to adjust_ptr_min_max_vals() and lead to rejection of the program, it's a better place to reside to avoid anything slipping through for future types. The reason why we must reject such off_reg is that we otherwise would not be able to derive a mask, see details in `9d7eceede7` ("bpf: restrict unknown scalars of mixed signed bounds for unprivileged"). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-04-16 23:51:39 +02:00
Daniel Borkmann	6f55b2f2a1	bpf: Move off_reg into sanitize_ptr_alu Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can use off_reg for generalizing some of the checks for all pointer types. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-04-16 23:51:36 +02:00
Daniel Borkmann	9601148392	bpf: Use correct permission flag for mixed signed bounds arithmetic We forbid adding unknown scalars with mixed signed bounds due to the spectre v1 masking mitigation. Hence this also needs bypass_spec_v1 flag instead of allow_ptr_leaks. Fixes: `2c78ee898d` ("bpf: Implement CAP_BPF") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>	2021-04-16 23:51:21 +02:00
Jakub Kicinski	8859a44ea0	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2021-04-09 20:48:35 -07:00
Martin KaFai Lau	e6ac2450d6	bpf: Support bpf program calling kernel function This patch adds support to BPF verifier to allow bpf program calling kernel function directly. The use case included in this set is to allow bpf-tcp-cc to directly call some tcp-cc helper functions (e.g. "tcp_cong_avoid_ai()"). Those functions have already been used by some kernel tcp-cc implementations. This set will also allow the bpf-tcp-cc program to directly call the kernel tcp-cc implementation, For example, a bpf_dctcp may only want to implement its own dctcp_cwnd_event() and reuse other dctcp_() directly from the kernel tcp_dctcp.c instead of reimplementing (or copy-and-pasting) them. The tcp-cc kernel functions mentioned above will be white listed for the struct_ops bpf-tcp-cc programs to use in a later patch. The white listed functions are not bounded to a fixed ABI contract. Those functions have already been used by the existing kernel tcp-cc. If any of them has changed, both in-tree and out-of-tree kernel tcp-cc implementations have to be changed. The same goes for the struct_ops bpf-tcp-cc programs which have to be adjusted accordingly. This patch is to make the required changes in the bpf verifier. First change is in btf.c, it adds a case in "btf_check_func_arg_match()". When the passed in "btf->kernel_btf == true", it means matching the verifier regs' states with a kernel function. This will handle the PTR_TO_BTF_ID reg. It also maps PTR_TO_SOCK_COMMON, PTR_TO_SOCKET, and PTR_TO_TCP_SOCK to its kernel's btf_id. In the later libbpf patch, the insn calling a kernel function will look like: insn->code == (BPF_JMP \| BPF_CALL) insn->src_reg == BPF_PSEUDO_KFUNC_CALL / <- new in this patch / insn->imm == func_btf_id / btf_id of the running kernel */ [ For the future calling function-in-kernel-module support, an array of module btf_fds can be passed at the load time and insn->off can be used to index into this array. ] At the early stage of verifier, the verifier will collect all kernel function calls into "struct bpf_kfunc_desc". Those descriptors are stored in "prog->aux->kfunc_tab" and will be available to the JIT. Since this "add" operation is similar to the current "add_subprog()" and looking for the same insn->code, they are done together in the new "add_subprog_and_kfunc()". In the "do_check()" stage, the new "check_kfunc_call()" is added to verify the kernel function call instruction: 1. Ensure the kernel function can be used by a particular BPF_PROG_TYPE. A new bpf_verifier_ops "check_kfunc_call" is added to do that. The bpf-tcp-cc struct_ops program will implement this function in a later patch. 2. Call "btf_check_kfunc_args_match()" to ensure the regs can be used as the args of a kernel function. 3. Mark the regs' type, subreg_def, and zext_dst. At the later do_misc_fixups() stage, the new fixup_kfunc_call() will replace the insn->imm with the function address (relative to __bpf_call_base). If needed, the jit can find the btf_func_model by calling the new bpf_jit_find_kfunc_model(prog, insn). With the imm set to the function address, "bpftool prog dump xlated" will be able to display the kernel function calls the same way as it displays other bpf helper calls. gpl_compatible program is required to call kernel function. This feature currently requires JIT. The verifier selftests are adjusted because of the changes in the verbose log in add_subprog_and_kfunc(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015142.1544736-1-kafai@fb.com	2021-03-26 20:41:51 -07:00
Martin KaFai Lau	34747c4120	bpf: Refactor btf_check_func_arg_match This patch moved the subprog specific logic from btf_check_func_arg_match() to the new btf_check_subprog_arg_match(). The core logic is left in btf_check_func_arg_match() which will be reused later to check the kernel function call. The "if (!btf_type_is_ptr(t))" is checked first to improve the indentation which will be useful for a later patch. Some of the "btf_kind_str[]" usages is replaced with the shortcut "btf_type_str(t)". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015136.1544504-1-kafai@fb.com	2021-03-26 20:41:50 -07:00
Martin KaFai Lau	e16301fbe1	bpf: Simplify freeing logic in linfo and jited_linfo This patch simplifies the linfo freeing logic by combining "bpf_prog_free_jited_linfo()" and "bpf_prog_free_unused_jited_linfo()" into the new "bpf_prog_jit_attempt_done()". It is a prep work for the kernel function call support. In a later patch, freeing the kernel function call descriptors will also be done in the "bpf_prog_jit_attempt_done()". "bpf_prog_free_linfo()" is removed since it is only called by "__bpf_prog_put_noref()". The kvfree() are directly called instead. It also takes this chance to s/kcalloc/kvcalloc/ for the jited_linfo allocation. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015130.1544323-1-kafai@fb.com	2021-03-26 20:41:50 -07:00

1 2 3 4 5 ...

716 Commits