Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=001f, idProduct=0b23
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB17X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20241228172028
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/PUZPR06MB6224CA59AD2B26054120B276D249A@PUZPR06MB6224.apcprd06.prod.outlook.com
The Focusrite Scarlett 2i2 1st Gen (1235:8006) produces
distorted/silent audio when QUIRK_FLAG_SKIP_IFACE_SETUP is active, as
that flag causes the feedback format to be detected as 17.15 instead
of 16.16.
Add a DEVICE_FLG entry for this device before the Focusrite VENDOR_FLG
entry so that it gets no quirk flags, overriding the vendor-wide
SKIP_IFACE_SETUP. This device doesn't have the internal mixer, Air, or
Safe modes that the quirk was designed to protect.
Fixes: 38c322068a ("ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUP")
Reported-by: pairomaniac [https://github.com/geoffreybennett/linux-fcp/issues/54]
Tested-by: pairomaniac [https://github.com/geoffreybennett/linux-fcp/issues/54]
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/abmsTjKmQMKbhYtK@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0666, idProduct=0880
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB Audio
usb 1-1: Manufacturer: SPACETOUCH
usb 1-1: SerialNumber: 000000000
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217ACC80B70BE25D87456B0D247A@TYUPR06MB6217.apcprd06.prod.outlook.com
Merge series from Sen Wang <sen@ti.com>:
Just two minor patches that aim to tidy up the code a little bit,
as well as fix the aux_div selection in davinci_mcasp_calc_clk_div()
for mid-range dividers (33 <= div <= 4096).
Sen Wang (2):
ASoC: ti: davinci-mcasp: extract mcasp_is_auxclk_enabled() helper
ASoC: ti: davinci-mcasp: improve aux_div selection for mid-range dividers
sound/soc/ti/davinci-mcasp.c | 45 +++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 14 deletions(-)
--
2.43.0
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Similarly, USB core holds a reference to all interfaces in the active
configuration so there is no need for a driver to take a reference to a
sibling interface only to release it at disconnect either.
Drop the redundant references to reduce cargo culting, make it easier to
spot drivers where extra references are needed, and reduce the risk of
memory leaks when drivers fail to release them.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111810.18688-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, we set a predefined codec component name in a DAI link. But
the codec name may contain an index which is not fixed. This series
suggest using partial match the codec name to fix the issue.
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0624, idProduct=3d3f
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB621795D087BF2D594027C235D273A@TYUPR06MB6217.apcprd06.prod.outlook.com
At fixing the memory leak of xfer buffer, we forgot to update the
corresponding comment, too. This resulted in a kernel-doc warning
with W=1. Let's correct it.
Fixes: 5c7ef50012 ("ALSA: qc_audio_offload: avoid leaking xfer_buf allocation")
Link: https://patch.msgid.link/20260226154414.1081568-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jun Seo <jun.seo.93@proton.me>
Link: https://patch.msgid.link/20260226010820.36529-1-jun.seo.93@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although DIYINHK USB Audio 2.0 (ID 20b1:2009) shows the implicit
feedback source for the capture stream, this would cause several
problems for the playback. Namely, the device can get wMaxPackSize
1024 for 24/32 bit format with 6 channels, and when a high sample rate
like 352.8kHz or 384kHz is played, the packet size overflows the max
limit. Also, the device has another two playback altsets, and those
aren't properly handled with the implicit feedback.
Since the device has been working well even before introducing the
implicit feedback, we can assume that it works fine in the async mode.
This patch adds the explicit skip of the implicit fb detection to make
the playback running in the async mode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We calculate the possible packet sizes beforehand for adaptive and
synchronous endpoints, but we didn't take care of the max frame size
for those pre-calculated values. When a device or a bus limits the
packet size, a high sample rate or a high number of channels may lead
to the packet sizes that are larger than the given limit, which
results in an error from the USB core at submitting URBs.
As a simple workaround, just add the sanity checks of pre-calculated
packet sizes to have the upper boundary of ep->maxframesize.
Fixes: f0bd62b640 ("ALSA: usb-audio: Improve frames size computation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add QUIRK_FLAG_SKIP_CLOCK_SELECTOR for Focusrite devices.
During interface parsing, snd_usb_clock_find_source() reads the clock
selector value then writes it back unchanged. On Focusrite devices
this redundant write results in a ~300ms delay per altsetting, adding
~1.8s to probe time on a typical device with 6 altsettings.
Enabling SKIP_CLOCK_SELECTOR skips the redundant write-back.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/00e53ae0a508b41516b41833daa17823381a649c.1771594828.git.g@b4.vu
Add a quirk flag to skip the usb_set_interface(),
snd_usb_init_pitch(), and snd_usb_init_sample_rate() calls in
__snd_usb_parse_audio_interface(). These are redundant with
snd_usb_endpoint_prepare() at stream-open time.
Enable the quirk for Focusrite devices, as init_sample_rate(rate_max)
sets 192kHz during probing, which disables the internal mixer and Air
and Safe modes.
Fixes: 16f1f83844 ("Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing"")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/65a7909b15f9feb76c2a6f4f8814c240ddc50737.1771594828.git.g@b4.vu
Remove QUIRK_FLAG_VALIDATE_RATES for Focusrite. With the previous
commit, focusrite_valid_sample_rate() produces correct rate tables
without USB probing.
QUIRK_FLAG_VALIDATE_RATES sends SET_CUR requests for each rate (~25ms
each) and leaves the device at 192kHz. This is a problem because that
rate: 1) disables the internal mixer, so outputs are silent until an
application opens the PCM and sets a lower rate, and 2) the Air and
Safe modes get disabled.
Fixes: 5963e52621 ("ALSA: usb-audio: Enable rate validation for Scarlett devices")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/09b9c012024c998c4ca14bd876ef0dce0d0b6101.1771594828.git.g@b4.vu
Replace the bLength == 10 max_rate check in
focusrite_valid_sample_rate() with filtering that also examines the
bmControls VAL_ALT_SETTINGS bit.
When VAL_ALT_SETTINGS is readable, the device uses strict
per-altsetting rate filtering (only the highest rate pair for that
altsetting is valid). When it is not readable, all rates up to
max_rate are valid.
For devices without the bLength == 10 Format Type descriptor extension
but with VAL_ALT_SETTINGS readable and multiple altsettings (only seen
in Scarlett 18i8 3rd Gen playback), fall back to the Focusrite
convention: alt 1 = 48kHz, alt 2 = 96kHz, alt 3 = 192kHz.
This produces correct rate tables for all tested Focusrite devices
(all Scarlett 2nd, 3rd, and 4th Gen, Clarett+, and Vocaster) using
only USB descriptors, allowing QUIRK_FLAG_VALIDATE_RATES to be removed
for Focusrite in the next commit.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/7e18c1f393a6ecb6fc75dd867a2c4dbe135e3e22.1771594828.git.g@b4.vu
scarlett2_add_dsp_ctls() was incorrectly storing the precomp and PEQ
filter coefficient control pointers into the precomp_flt_switch_ctls
and peq_flt_switch_ctls arrays instead of the intended targets
precomp_flt_ctls and peq_flt_ctls. Pass NULL instead, as the filter
coefficient control pointers are not used, and remove the unused
precomp_flt_ctls and peq_flt_ctls arrays from struct scarlett2_data.
Additionally, scarlett2_update_filter_values() was reading
dsp_input_count * peq_flt_count values for
SCARLETT2_CONFIG_PEQ_FLT_SWITCH, but the peq_flt_switch array is
indexed only by dsp_input_count (one switch per DSP input, not per
filter). Fix the read count.
Fixes: b64678eb4e ("ALSA: scarlett2: Add DSP controls")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/86497b71db060677d97c38a6ce5f89bb3b25361b.1771581197.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull sound fixes from Takashi Iwai:
"Here are a bunch of updates, but there should be no big surprises;
mostly device-specific quirks and fix-ups or non-code changes:
- Quirks for ASoC AMD, HD-audio and USB-audio
- Fixes in ASoC fsl, rockchip, renesas, aw codecs
- Fixes for USB-audio packet handling in the implicit feedback mode
- Updates of SPDX license IDs in some files"
* tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclk
ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6
ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names
ASoC: dt-bindings: asahi-kasei,ak4458: Fix the supply names
ASoC: dt-bindings: asahi-kasei,ak4458: set unevaluatedProperties:false
ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models
ASoC: amd: acp: Add ACP7.0 match entries for Realtek parts
ALSA: echoaudio: Add SPDX ids to some files
ALSA: isa: Add SPDX id lines to some files
ALSA: core: Add SPDX license id to files
ASoC: tas2783A: add explicit port prepare handling
ASoC: renesas: rz-ssi: Fix playback and capture
ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 UX3405MA
ALSA: hda/conexant: Fix headphone jack handling on Acer Swift SF314
ASoC: qcom: sm8250: Add quinary MI2S support
ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 15X M6501RR
ALSA: usb-audio: Avoid potentially repeated XRUN error messages
ALSA: usb-audio: Add sanity check for OOB writes at silencing
ALSA: usb-audio: Optimize the copy of packet sizes for implicit fb handling
ALSA: usb-audio: Update the number of packets properly at receiving
...
Some XRUN-related error messages may repeat themselves, because there
can be multiple pending packets. Modify notify_xrun() function to
return whether it's being stopped or not, and show the error message
only once when the XRUN is actually handled.
Along with it, fix a typo of word package to packet in the error
message.
Link: https://patch.msgid.link/20260216141209.1849200-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size. But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.
For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows. Also, report back the transfer error properly from there,
too.
Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Link: https://patch.msgid.link/20260216141209.1849200-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We did manual copies over loop for the packet data update of the
implicit feedback, but this can be optimized with a simple memcpy().
Along with it, change the data type of snd_usb_packet_info struct to
align with other (from uint32_t to int).
No functional changes but only code optimizations.
Link: https://patch.msgid.link/20260216141209.1849200-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At receiving the packets from the implicit feedback source, we didn't
update ctx->packets field but only the ctx->packet_size[] data.
In exceptional cases, this might lead to unexpectedly superfluous data
transfer (although this won't happen usually due to the nature of USB
isochronous transfer). Fix it to update the field properly.
Link: https://patch.msgid.link/20260216141209.1849200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0020, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: GHW-123P
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB62176831E47899AB98902012D260A@TYUPR06MB6217.apcprd06.prod.outlook.com
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the support for the Sound Blaster X-Fi Surround 5.1 Pro was added,
the existing logic for the X-Fi Surround 5.1 in snd_audigy2nx_led_put()
was broken due to missing *else* before the added *if*: snd_usb_ctl_msg()
became incorrectly called twice and an error from first snd_usb_ctl_msg()
call ignored. As the added snd_usb_ctl_msg() call was totally identical
to the existing one for the "plain" X-Fi Surround 5.1, just merge those
two *if* statements while fixing the broken logic...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 7cdd8d7313 ("ALSA: usb-audio - Add support for USB X-Fi S51 Pro")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Link: https://patch.msgid.link/20260203161558.18680-1-s.shtylyov@auroraos.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add mixer control support for the Focusrite Forte (USB ID 0x1235:0x8010),
an older USB audio interface that predates the Scarlett 2nd generation.
The Forte uses UAC2_CS_MEM (bRequest=0x03) for its input controls rather
than the standard UAC2_CS_CUR (0x01) used by Scarlett devices. This patch
adds Forte-specific control handlers that use the correct USB protocol.
Features implemented:
- Input source selection (Mic/Line/Inst) for both channels
- High pass filter switch
- 48V phantom power switch
- Phase invert switch
- Pad switch
- Preamp gain control (0-42 range, ~0-75dB)
- Matrix mixer controls (6 inputs x 4 outputs)
- Output volume and mute controls
The device is registered via mixer_quirks.c and uses the existing
mixer_scarlett.c infrastructure with Forte-specific additions.
Credit: This work builds on prior reverse-engineering by alastair-dm.
Link: https://github.com/alastair-dm/forte-mixer/wiki
Link: https://github.com/alastair-dm/forte-mixer
Link: https://github.com/jopdorp/forte-mixer
Signed-off-by: Jegor van Opdorp <jegorvanopdorp@gmail.com>
Link: https://patch.msgid.link/20260127081541.219669-1-jegorvanopdorp@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent fix commit for addressing the OOB access of PCM URB data
buffer caused a regression on Behringer UMC2020HD device, resulting in
choppy sound. The fix used ep->max_urb_frames for the upper limit
check, and this is no right value to be referred.
Use the actual buffer size (ctx->buffer_size) as the upper limit
instead, which also avoids the regression on the device above.
Fixes: ef5749ef8b ("ALSA: usb-audio: Prevent excessive number of frames")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220997
Link: https://patch.msgid.link/20260121082025.718748-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees
mixer->id_elems but the controls already added to the card still
reference the freed memory. Later when snd_card_register() runs,
the OSS mixer layer calls their callbacks and hits a use-after-free read.
Call trace:
get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411
get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241
mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381
snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887
...
snd_card_register+0x4ed/0x6d0 sound/core/init.c:923
usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025
Fix by calling snd_ctl_remove() for all mixer controls before freeing
id_elems. We save the next pointer first because snd_ctl_remove()
frees the current element.
Fixes: 6639b6c236 ("[ALSA] usb-audio - add mixer control notifications")
Cc: stable@vger.kernel.org
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Berk Cem Goksel <berkcgoksel@gmail.com>
Link: https://patch.msgid.link/20260120102855.7300-1-berkcgoksel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=2fc6, idProduct=f06b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: MOONDROP Moonriver2 Ti
usb 1-1: Manufacturer: MOONDROP
usb 1-1: SerialNumber: MOONDROP Moonriver2 Ti
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Reviewed-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217911EFC7E9224935FA507D28DA@TYUPR06MB6217.apcprd06.prod.outlook.com
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type.
Fixes: ac34df733d ("ALSA: usb-audio: scarlett2: Update get_config to do endian conversion")
Cc: stable@vger.kernel.org
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20260117012706.1715574-1-samasth.norway.ananda@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown
Lianqin Hu
Geoffrey D. Bennett
Daniel Lezcano
Frank Zhang
Takashi Iwai
Johan Hovold
Jun Seo
Tim Bird
Kees Cook
Linus Torvalds
Qihang Guo
Sergey Shtylyov
Jegor van Opdorp
Randy Dunlap
Berk Cem Goksel
Samasth Norway Ananda
Arun Raghavan