These #defines have been removed from the kernel headers in favour of
the string based PMU format attributes. Usages were previously removed
from the recording side of cs-etm in Perf. Finish the removal by
removing usages from the decode side too.
It's a straight replacement of the old #defines with the new register
bit definitions. Except cs_etm__setup_timeless_decoding() which wasn't
looking at the saved metadata and was instead hard coding an access to
'attr.config'. This was vulnerable to the same issue of .config being
moved to .config2 etc that the original removal of ETM_OPT_* tried to
fix. So fix that too.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking up the changes from these csets:
2153b2e891 ("sparc: Add architecture support for clone3")
99d2592023 ("rseq: Implement sys_rseq_slice_yield()")
4ac286c4a8 ("s390/syscalls: Switch to generic system call table generation")
This makes 'perf trace' support it, now its possible, for instance, to
do:
# perf trace -e rseq_slice_yield --max-stack=16
Here is an example with the 'sendmmsg' syscall:
root@x1:~# perf trace -e sendmmsg --max-stack 16 --max-events=1
0.000 ( 0.062 ms): dbus-broker/1012 sendmmsg(fd: 150, mmsg: 0x7ffef57cca50, vlen: 1, flags: DONTWAIT|NOSIGNAL) = 1
syscall_exit_to_user_mode_prepare ([kernel.kallsyms])
syscall_exit_to_user_mode_prepare ([kernel.kallsyms])
syscall_exit_to_user_mode ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64 ([kernel.kallsyms])
[0x117ce7] (/usr/lib64/libc.so.6 (deleted))
root@x1:~#
To do a system wide tracing of the new 'rseq_slice_yield' syscall with a
backtrace of at most 16 entries.
This addresses these perf tools build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/scripts/syscall.tbl scripts/syscall.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
diff -u tools/perf/arch/arm/entry/syscalls/syscall.tbl arch/arm/tools/syscall.tbl
diff -u tools/perf/arch/sh/entry/syscalls/syscall.tbl arch/sh/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/sparc/entry/syscalls/syscall.tbl arch/sparc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/xtensa/entry/syscalls/syscall.tbl arch/xtensa/kernel/syscalls/syscall.tbl
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, some architecture-specific perf-regs functions, such as
arch__intr_reg_mask() and arch__user_reg_mask(), are defined with the
__weak attribute.
This approach ensures that only functions matching the architecture of
the build/run host are compiled and executed, reducing build time and
binary size.
However, this __weak attribute restricts these functions to be called
only on the same architecture, preventing cross-architecture
functionality.
For example, a perf.data file captured on x86 cannot be parsed on an ARM
platform.
To address this limitation, this patch removes the __weak attribute from
these perf-regs functions.
The architecture-specific code is moved from the arch/ directory to the
util/perf-regs-arch/ directory.
The appropriate architectural functions are then called based on the
EM_HOST.
No functional changes are intended.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xudong Hao <xudong.hao@intel.com>
Cc: Zide Chen <zide.chen@intel.com>
[ Fixed up somme fuzz with s390 and riscv Build files wrt removing perf_regs.o ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up changes from:
b36d4b6aa8 ("arch: hookup listns() system call")
This should be used to beautify the syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/scripts/syscall.tbl scripts/syscall.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
diff -u tools/perf/arch/arm/entry/syscalls/syscall.tbl arch/arm/tools/syscall.tbl
diff -u tools/perf/arch/sh/entry/syscalls/syscall.tbl arch/sh/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/sparc/entry/syscalls/syscall.tbl arch/sparc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/xtensa/entry/syscalls/syscall.tbl arch/xtensa/kernel/syscalls/syscall.tbl
Please see tools/include/uapi/README.
Note that s390 syscall table is still out of sync as it switches to use the
generic table. But I'd like to minimize the change in this commit.
Cc: linux-arch@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Pull perf tools updates from Namhyung Kim:
"Perf event/metric description:
Unify all event and metric descriptions in JSON format. Now event
parsing and handling is greatly simplified by that.
From users point of view, perf list will provide richer information
about hardware events like the following.
$ perf list hw
List of pre-defined events (to be used in -e or -M):
legacy hardware:
branch-instructions
[Retired branch instructions [This event is an alias of branches]. Unit: cpu]
branch-misses
[Mispredicted branch instructions. Unit: cpu]
branches
[Retired branch instructions [This event is an alias of branch-instructions]. Unit: cpu]
bus-cycles
[Bus cycles,which can be different from total cycles. Unit: cpu]
cache-misses
[Cache misses. Usually this indicates Last Level Cache misses; this is intended to be used in conjunction with the
PERF_COUNT_HW_CACHE_REFERENCES event to calculate cache miss rates. Unit: cpu]
cache-references
[Cache accesses. Usually this indicates Last Level Cache accesses but this may vary depending on your CPU. This may include
prefetches and coherency messages; again this depends on the design of your CPU. Unit: cpu]
cpu-cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cycles]. Unit: cpu]
cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cpu-cycles]. Unit: cpu]
instructions
[Retired instructions. Be careful,these can be affected by various issues,most notably hardware interrupt counts. Unit: cpu]
ref-cycles
[Total cycles; not affected by CPU frequency scaling. Unit: cpu]
But most notable changes would be in the perf stat. On the right side,
the default metrics are better named and aligned. :)
$ perf stat -- perf test -w noploop
Performance counter stats for 'perf test -w noploop':
11 context-switches # 10.8 cs/sec cs_per_second
0 cpu-migrations # 0.0 migrations/sec migrations_per_second
3,612 page-faults # 3532.5 faults/sec page_faults_per_second
1,022.51 msec task-clock # 1.0 CPUs CPUs_utilized
110,466 branch-misses # 0.0 % branch_miss_rate (88.66%)
6,934,452,104 branches # 6781.8 M/sec branch_frequency (88.66%)
4,657,032,590 cpu-cycles # 4.6 GHz cycles_frequency (88.65%)
27,755,874,218 instructions # 6.0 instructions insn_per_cycle (89.03%)
TopdownL1 # 0.3 % tma_backend_bound
# 9.3 % tma_bad_speculation (89.05%)
# 9.7 % tma_frontend_bound (77.86%)
# 80.7 % tma_retiring (88.81%)
1.025318171 seconds time elapsed
1.013248000 seconds user
0.012014000 seconds sys
Deferred unwinding support:
With the kernel support (commit c69993ecdd: "perf: Support deferred
user unwind"), perf can use deferred callchains for userspace stack
trace with frame pointers like below:
$ perf record --call-graph fp,defer ...
This will be transparent to users when it comes to other commands like
perf report and perf script. They will merge the deferred callchains
to the previous samples as if they were collected together.
ARM SPE updates
- Extensive enhancements to support various kinds of memory
operations including GCS, MTE allocation tags, memcpy/memset,
register access, and SIMD operations.
- Add inverted data source filter (inv_data_src_filter) support to
exclude certain data sources.
- Improve documentation.
Vendor event updates:
- Intel: Updated event files for Sierra Forest, Panther Lake, Meteor
Lake, Lunar Lake, Granite Rapids, and others.
- Arm64: Added metrics for i.MX94 DDR PMU and Cortex-A720AE
definitions.
- RISC-V: Added JSON support for T-HEAD C920V2.
Misc:
- Improve pointer tracking in data type profiling. It'd give better
output when the variable is using container_of() to convert type.
- Annotation support for perf c2c report in TUI. Press 'a' key to
enter annotation view from cacheline browser window. This will show
which instruction is causing the cacheline contention.
- Lots of fixes and test coverage improvements!"
* tag 'perf-tools-for-v6.19-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (214 commits)
libperf: Use 'extern' in LIBPERF_API visibility macro
perf stat: Improve handling of termination by signal
perf tests stat: Add test for error for an offline CPU
perf stat: When no events, don't report an error if there is none
perf tests stat: Add "--null" coverage
perf cpumap: Add "any" CPU handling to cpu_map__snprint_mask
libperf cpumap: Fix perf_cpu_map__max for an empty/NULL map
perf stat: Allow no events to open if this is a "--null" run
perf test kvm: Add some basic perf kvm test coverage
perf tests evlist: Add basic evlist test
perf tests script dlfilter: Add a dlfilter test
perf tests kallsyms: Add basic kallsyms test
perf tests timechart: Add a perf timechart test
perf tests top: Add basic perf top coverage test
perf tests buildid: Add purge and remove testing
perf tests c2c: Add a basic c2c
perf c2c: Clean up some defensive gets and make asan clean
perf jitdump: Fix missed dso__put
perf mem-events: Don't leak online CPU map
perf hist: In init, ensure mem_info is put on error paths
...
errno.h isn't used in auxtrace.h so remove it and fix build failures
caused by transitive dependencies through auxtrace.h on errno.h.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The NO_AUXTRACE build option was used when the __get_cpuid feature
test failed or if it was provided on the command line. The option no
longer avoids a dependency on a library and so having the option is
just adding complexity to the code base. Remove the option
CONFIG_AUXTRACE from Build files and HAVE_AUXTRACE_SUPPORT by assuming
it is always defined.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rather than having a feature test and include of <cpuid.h> for the
__get_cpuid function, use the cpuid function provided by
tools/perf/arch/x86/util/cpuid.h.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick the changes in this cset:
56101b69c9 ("uprobes/x86: Add uprobe syscall to speed up uprobe")
That add support for this new 'uprobe' syscall in tools such as 'perf trace'.
Now it is possible to do a system wide 'perf trace' to look if this new
syscall is being used:
root@number:~# perf trace -v -e uprobe
<SNIP>
event qualifier tracepoint filter: (common_pid != 33989) && (id == 336)
^C
root@number#
$ grep -w uprobe tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
336 common uprobe sys_uprobe
$
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Please see tools/include/uapi/README for further details.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When tracking variable types, instructions that modify a pointer value
in an untracked way can lead to incorrect type propagation. To prevent
this, invalidate the register state when encountering such instructions.
This change invalidates pointer types for various arithmetic and bitwise
operations that current pointer offset tracking doesn't support, like
imul, shl, and, inc, etc.
A special case is added for 'xor reg, reg', which is a common idiom for
zeroing a register. For this, the register state is updated to be a
constant with a value of 0.
This could introduce slight regressions if a variable is zeroed and then
reused. This can be addressed in the future by using all DWARF locations
for instruction tracking instead of only the first one.
Signed-off-by: Zecheng Li <zecheng@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The tracked pointer offset was not being preserved in the stack state,
which could lead to incorrect type analysis. This change adds a
ptr_offset field to the type_state_stack struct and passes it to
set_stack_state and findnew_stack_state to ensure the offset is
preserved after the pointer is loaded from a stack location. It improves
the type annotation coverage and quality.
Signed-off-by: Zecheng Li <zecheng@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Track the arithmetic operations on registers with pointer types. We
handle only add, sub and lea instructions. The original pointer
information needs to be preserved for getting outermost struct types.
For example, reg0 points to a struct cfs_rq, when we add 0x10 to reg0,
it should preserve the information of struct cfs_rq + 0x10 in the
register instead of a pointer type to the child field at 0x10.
Details:
1. struct type_state_reg now includes an offset, indicating if the
register points to the start or an internal part of its associated
type. This offset is used in mem to reg and reg to stack mem
transfers, and also applied to the final type offset.
2. lea offset(%sp/%fp), reg is now treated as taking the address of a
stack variable. It worked fine in most cases, but an issue with this
approach is the pointer type may not exist.
3. lea offset(%base), reg is handled by moving the type from %base and
adding an offset, similar to an add operation followed by a mov reg
to reg.
4. Non-stack variables from DWARF with non-zero offsets in their
location expressions are now accepted with register offset tracking.
Multi-register addressing modes in LEA are not supported.
Signed-off-by: Zecheng Li <zecheng@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Introduce TSR_KIND_POINTER to improve the data type profiler's ability
to track pointer-based memory accesses and address register variables.
TSR_KIND_POINTER represents that the location holds a pointer type to
the type in the type state. The semantics match the `breg` registers
that describe a memory location.
This change implements handling for this new kind in mov instructions
and in the check_matching_type() function. When a TSR_KIND_POINTER is
moved to the stack, the stack state size is set to the architecture's
pointer size.
Signed-off-by: Zecheng Li <zecheng@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now the events file isn't directly parsed from a FILE but stored in a
string prior to parsing, remove the FILE argument to the associated
scanner functions as they only ever pass NULL.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
After KVM supports PEBS for guest on Intel platforms
(https://lore.kernel.org/all/20220411101946.20262-1-likexu@tencent.com/),
host loses the capability to sample guest with PEBS since all PEBS related
MSRs are switched to guest value after vm-entry, like IA32_DS_AREA MSR is
switched to guest GVA at vm-entry. This would lead to "perf kvm record"
fails to sample guest on Intel platforms since "cycles:P" event is used to
sample guest by default as below case shows.
sudo perf kvm record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data.guest ]
So to ensure guest record can be sampled successfully, use "cycles"
instead of "cycles:P" to sample guest record by default on Intel
platforms. With this patch, the guest record can be sampled
successfully.
sudo perf kvm record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.783 MB perf.data.guest (23 samples) ]
Fixes: cf8e55fe50 ("KVM: x86/pmu: Expose CPUIDs feature bits PDCM, DS, DTES64")
Reported-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The powerpc PMU collecting Dispatch Trace Log (DTL) entries makes use of
AUX support in perf infrastructure.
The PMU driver has the functionality to collect trace entries in the aux
buffer.
On the tools side, this data is made available as PERF_RECORD_AUXTRACE
records.
This record is generated by "perf record" command.
To enable the creation of PERF_RECORD_AUXTRACE, add functions to
initialize auxtrace records ie "auxtrace_record__init()".
Fill in fields for other callbacks like info_priv_size, info_fill, free,
recording options etc.
Define auxtrace_type as PERF_AUXTRACE_VPA_DTL. Add header file to
define vpa dtl pmu specific details.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's an environment that caused the following build error. Include
"debug.h" (under util directory) to fix it.
arch/x86/tests/topdown.c: In function 'event_cb':
arch/x86/tests/topdown.c:53:25: error: implicit declaration of function 'pr_debug'
[-Werror=implicit-function-declaration]
53 | pr_debug("Broken topdown information for '%s'\n", evsel__name(evsel));
| ^~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/20250815164122.289651-1-namhyung@kernel.org
Fixes: 5b546de9cc ("perf topdown: Use attribute to see an event is a topdown metic or slots")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Pull perf tools updates from Namhyung Kim:
"Build-ID processing goodies:
Build-IDs are content based hashes to link regions of memory to ELF
files in post processing. They have been available in distros for
quite a while:
$ file /bin/bash
/bin/bash: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=707a1c670cd72f8e55ffedfbe94ea98901b7ce3a,
for GNU/Linux 3.2.0, stripped
It is possible to ask the kernel to get it from mmap executable
backing storage at time they are being put in place and send it as
metadata at that moment to have in perf.data.
Prefer that across the board to speed up 'record' time - it post
processes the samples to find binaries touched by any samples and
to save them with build-ID. It can skip reading build-ID in
userspace if it comes from the kernel.
perf record:
* Make --buildid-mmap default. The kernel can generate MMAP2 events
with a build-ID from ELF header. Use that by default instead of using
inode and device ID to identify binaries. It also can be disabled
with --no-buildid-mmap.
* Use BPF for -u/--uid option to sample processes belong to a user.
BPF can track user processes more accurately and the existing logic
often fails to get the list of processes due to race with reading the
/proc filesystem.
* Generate PERF_RECORD_BPF_METADATA when it profiles BPF programs and
they have variables starting with "bpf_metadata_". This will help to
identify BPF objects used in the profile. This has been supported in
bpftool for some time and allows the recording of metadata such as
commit hashes, versions, etc, that now gets recorded in perf.data as
well.
* Collect list of DSOs touched in the sample callchains as well as in
the sample itself. This would increase the processing time at the end
of record, but can improve the data quality.
perf stat:
* Add a new 'drm' pseudo-PMU support like in 'hwmon'. It can collect
DRM usage stats using fdinfo in /proc.
On my Intel laptop, it shows like below:
$ perf list drm
...
drm:
drm-active-stolen-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-active-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-engine-capacity-video
[Engine capacity. Unit: drm_i915]
drm-engine-copy
[Utilization in ns. Unit: drm_i915]
drm-engine-render
[Utilization in ns. Unit: drm_i915]
drm-engine-video
[Utilization in ns. Unit: drm_i915]
...
$ sudo perf stat -a -e drm-engine-render,drm-engine-video,drm-engine-capacity-video sleep 1
Performance counter stats for 'system wide':
48,137,316,988,873 ns drm-engine-render
34,452,696,746 ns drm-engine-video
20 capacity drm-engine-capacity-video
1.002086194 seconds time elapsed
perf list
* Add description for software events. The description is in JSON format
and the event parser now can handle the software events like others
(for example, it's case-insensitive and subject to wildcard matching).
$ perf list software
List of pre-defined events (to be used in -e or -M):
software:
alignment-faults
[Number of kernel handled memory alignment faults. Unit: software]
bpf-output
[An event used by BPF programs to write to the perf ring buffer. Unit: software]
cgroup-switches
[Number of context switches to a task in a different cgroup. Unit: software]
context-switches
[Number of context switches [This event is an alias of cs]. Unit: software]
cpu-clock
[Per-CPU high-resolution timer based event. Unit: software]
cpu-migrations
[Number of times a process has migrated to a new CPU [This event is an alias of migrations]. Unit: software]
cs
[Number of context switches [This event is an alias of context-switches]. Unit: software]
dummy
[A placeholder event that doesn't count anything. Unit: software]
emulation-faults
[Number of kernel handled unimplemented instruction faults handled through emulation. Unit: software]
faults
[Number of page faults [This event is an alias of page-faults]. Unit: software]
major-faults
[Number of major page faults. Major faults require I/O to handle. Unit: software]
migrations
[Number of times a process has migrated to a new CPU [This event is an alias of cpu-migrations]. Unit: software]
minor-faults
[Number of minor page faults. Minor faults don't require I/O to handle. Unit: software]
page-faults
[Number of page faults [This event is an alias of faults]. Unit: software]
task-clock
[Per-task high-resolution timer based event. Unit: software]
perf ftrace:
* Add -e/--events option to perf ftrace latency to measure latency
between the two events instead of a function.
$ sudo perf ftrace latency -ab -e i915_request_wait_begin,i915_request_wait_end --hide-empty -- sleep 1
# DURATION | COUNT | GRAPH |
256 - 512 us | 4 | ###### |
2 - 4 ms | 2 | ### |
4 - 8 ms | 12 | ################### |
8 - 16 ms | 10 | ################ |
# statistics (in usec)
total time: 194915
avg time: 6961
max time: 12855
min time: 373
count: 28
* Add new function graph tracer options (--graph-opts) to display more
info like arguments and return value. They will be passed to the
kernel ftrace directly.
$ sudo perf ftrace -G vfs_write --graph-opts retval,retaddr
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
...
5) | mutex_unlock() { /* <-rb_simple_write+0xda/0x150 */
5) 0.188 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cf90e */
5) | rt_mutex_slowunlock() { /* <-rb_simple_write+0xda/0x150 */
5) | _raw_spin_lock_irqsave() { /* <-rt_mutex_slowunlock+0x4f/0x200 */
5) 0.123 us | preempt_count_add(); /* <-_raw_spin_lock_irqsave+0x23/0x90 ret=0x0 */
5) 0.128 us | local_clock(); /* <-__lock_acquire.isra.0+0x17a/0x740 ret=0x3bf2a3cfc8b */
5) 0.086 us | do_raw_spin_trylock(); /* <-_raw_spin_lock_irqsave+0x4a/0x90 ret=0x1 */
5) 0.845 us | } /* _raw_spin_lock_irqsave ret=0x292 */
...
Misc:
* Add perf archive --exclude-buildids <FILE> option to skip some binaries.
The format of the FILE should be same as an output of perf buildid-list.
* Get rid of dependency of libcrypto. It was just to get SHA-1 hash so
implement it directly like in the kernel. A side effect is that it
needs -fno-strict-aliasing compiler option (again, like in the kernel).
* Convert all shell script tests to use bash"
* tag 'perf-tools-for-v6.17-2025-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
perf record: Cache build-ID of hit DSOs only
perf test: Ensure lock contention using pipe mode
perf python: Stop using deprecated PyUnicode_AsString()
perf list: Skip ABI PMUs when printing pmu values
perf list: Remove tracepoint printing code
perf tp_pmu: Add event APIs
perf tp_pmu: Factor existing tracepoint logic to new file
perf parse-events: Remove non-json software events
perf jevents: Add common software event json
perf tools: Remove libtraceevent in .gitignore
perf test: Fix comment ordering
perf sort: Use perf_env to set arch sort keys and header
perf test: Move PERF_SAMPLE_WEIGHT_STRUCT parsing to common test
perf sample: Remove arch notion of sample parsing
perf env: Remove global perf_env
perf trace: Avoid global perf_env with evsel__env
perf auxtrace: Pass perf_env from session through to mmap read
perf machine: Explicitly pass in host perf_env
perf bench synthesize: Avoid use of global perf_env
perf top: Make perf_env locally scoped
...
Previously arch_support_sort_key and arch_perf_header_entry used a
weak symbol to compile as appropriate for x86 and powerpc. A
limitation to this is that the handling of a data file could vary in
cross-platform development. Change to using the perf_env of the
current session to determine the architecture kind and set the sort
key and header entries as appropriate.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-23-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
By definition arch sample parsing and synthesis will inhibit certain
kinds of cross-platform record then analysis (report, script,
etc.). Remove arch_perf_parse_sample_weight and
arch_perf_synthesize_sample_weight replacing with a common
implementation. Combine perf_sample p_stage_cyc and retire_lat as
weight3 to capture the differing uses regardless of compiled for
architecture.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-21-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Topdown metric events require grouping with a slots event. In perf
metrics this is currently achieved by metrics adding an unnecessary
"0 * tma_info_thread_slots". New TMA metrics trigger optimizations of
the metric expression that removes the event and breaks the metric due
to the missing but required event. Add a pass immediately before
sorting and fixing parsed events, that insert a slots event if one is
missing. Update test expectations to match this.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250719030517.1990983-15-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
James Clark
Arnaldo Carvalho de Melo
Dapeng Mi
Ian Rogers
Leo Yan
Shimin Guo
Namhyung Kim
Linus Torvalds
Zecheng Li
Thomas Falcon
Athira Rajeev
Yunseong Kim
Quan Zhou