mac80211 converts 802.3 multicast packets to 802.11 format
before driver TX, even when Ethernet encapsulation offload
is enabled. This prevents drivers that support multicast
Ethernet encapsulation offload from receiving frames in
native 802.3 format.
Introduce the IEEE80211_OFFLOAD_ENCAP_MCAST flag to bypass the
802.11 encapsulation step and pass the multicast packet to the
driver in 802.3 format. Drivers that support multicast Ethernet
encapsulation offload can advertise this flag.
Disable multicast encapsulation offload in MLO case for drivers not
advertising MLO_MCAST_MULTI_LINK_TX support for AP mode and for
3-address AP_VLAN multicast packets.
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604162403.1563729-4-tamizh.raja@oss.qualcomm.com
[fix unlikely(), indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 already supports multicast-to-unicast conversion for
native 802.11 TX paths, but this handling is missing for the
802.3 transmit path. Due to that the packet never converted to
unicast and directly pass it to 802.11 Tx path by checking the
destination address as multicast.
Extend ieee80211_subif_start_xmit_8023() to honor the
multicast_to_unicast setting by cloning and converting multicast
Ethernet frames into per-station unicast transmissions, following
the same behavior of the native 802.11 TX path and allow it
to take 802.3 path.
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604162403.1563729-3-tamizh.raja@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently ieee80211_8023_xmit() accesses the sta pointer without any
sanity check, assuming that only unicast packets for an authorized
station are processed. But the sta pointer could become NULL when
a framework to support 802.3 offload for the multicast packets is
added in the follow-up patches. Add the valid sta pointer sanity
check to avoid the invalid pointer access.
This aligns with some of the subordinate functions called by
ieee80211_8023_xmit() that already NULL-check 'sta' such as
ieee80211_select_queue() and ieee80211_aggr_check().
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604162403.1563729-2-tamizh.raja@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Convert the separately-allocated reorder_buf pointer to a C99 flexible
array member at the end of struct tid_ampdu_rx, with both the
sk_buff_head and the jiffies timestamp in each array element. This
collapses three allocations into one and removes the corresponding
kfree() pairs from the error and free paths.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260605005627.317194-1-rosenp@gmail.com
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When building with a version of clang that supports
'-fms-anonymous-structs' (which will be used by the kernel instead of
the wider '-fms-extensions'), there are a couple warnings after some
recent mesg_hwmp.c changes:
net/mac80211/mesh_hwmp.c:373:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
373 | struct ieee80211_mesh_hwmp_preq_top *preq_elem_top =
| ^
net/mac80211/mesh_hwmp.c:390:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
390 | struct ieee80211_mesh_hwmp_prep_top *prep_elem_top =
| ^
2 errors generated.
Enclose the switch case blocks in braces to clear up the warning.
Fixes: a91c65cb99 ("wifi: mac80211: Use struct instead of macro for PREP frame")
Fixes: 4ac20bd40b ("wifi: mac80211: Use struct instead of macro for PREQ frame")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260604-mac80211-mesh_hwmp-fix-c23-extensions-v1-1-25a64d6ce541@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit d594cc6f2c ("wifi: mac80211: restore non-chanctx injection
behaviour") restored the monitor injection fallback for drivers using
chanctx emulation but explicitly deferred drivers that transitioned
to real chanctx ops. mt76 falls in that category and still drops
every injected frame when monitor coexists with another interface.
When the monitor has no chanctx of its own, fall back to the only
chanctx in flight if there is exactly one. Refuse if multiple are
present: picking arbitrarily would inject on an unrelated channel.
Emulated and real chanctx drivers both flow through this fallback,
since emulation always presents zero or one chanctx in
local->chanctx_list.
Reran the airgeddon evil-twin flow (hostapd AP + coexisting monitor
VIF on the same phy + aireplay-ng deauth from the monitor) on
mt7921e PCIe and mt7921u USB across 2.4 GHz and 5 GHz, and on a
Kali VM with MT7921U passthrough as the closest match to the
original reporter's setup. None reproduced the hang seen against
the earlier attempt at this fix
(<20251216111909.25076-2-johannes@sipsolutions.net>) or against v1
on lore in March.
Cc: <stable+noautosel@kernel.org> # causes some older drivers to crash
Reported-by: Oscar Alfonso Diaz <oscar.alfonso.diaz@gmail.com>
Closes: https://github.com/morrownr/USB-WiFi/issues/682
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: 傅继晗 <fjhhz1997@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/5c2760bd9bc34616bf7892848872522254dd1ce5.1780513445.git.lucid_duck@justthetip.ca
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are multiple cases where interface links are removed
and the station links need to be removed with them, e.g.
in mlme.c we have both received and transmitted multi-link
reconfiguration, doing the two things in different order,
the former deleting STA links when the vif link change may
still fail.
It's also not clear that userspace (hostapd) couldn't, at
least in theory, remove a link from an interface without
removing the station links first, or even leave stations
that aren't MLO-capable, using that link.
Unify this code into ieee80211_vif_update_links() so that
it always happens, always happens in the right order and
is transactional (i.e. failures are handled correctly.)
Link: https://patch.msgid.link/20260529102644.c352f73a4658.I7219a5d72dab2abcecea9b5c52e7eb7a50e68d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce basic rate encoding/decoding for S1G stas such that the
usermode rx reporting is relevant as it currently uses VHT calculations
which are obviously wildy different to S1G. Sample iw output (with the
associated iw patches applied):
Connected to 0c:bf:74:00:21:c4 (on wlan0)
SSID: wifi_halow
freq: 923.500
RX: 7325230 bytes (4756 packets)
TX: 190044 bytes (2238 packets)
signal: -38 dBm
rx bitrate: 43.3 MBit/s S1G-MCS 9 8MHz short GI S1G-NSS 1
tx bitrate: 43.3 MBit/s S1G-MCS 9 8MHz short GI S1G-NSS 1
bss flags:
dtim period: 1
beacon int: 100
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260602062224.1792985-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the AF flag is enabled, hwmp_prep_frame_process() overreads orig_addr
by 2 bytes. Since this occurs within the socket buffer, it does not read
across memory boundaries and therefore poses no security risk; however, we
will fix it as a precaution.
In this fix, a new function mesh_path_parse_reply_frame() is established to
separate the implementation of frame format validation and the check for
unsupported features. This is intended to facilitate future work when
implementing the currently unsupported parts.
Assisted-by: Claude:Sonnet 4.6
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-5-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the AF flag is enabled, hwmp_preq_frame_process() overreads
target_addr by 2 bytes. Since this occurs within the socket buffer, it does
not read across memory boundaries and therefore poses no security risk;
however, we will fix it as a precaution.
In this fix, a new function mesh_path_parse_request_frame() is established
to separate the implementation of frame format validation and the check for
unsupported features. This is intended to facilitate future work when
implementing the currently unsupported parts.
Assisted-by: Claude:Sonnet 4.6
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-4-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing PERR_IE_* macros access HWMP PERR frame fields via hardcoded
byte offsets. Each PERR destination entry contains an optional 6-byte AE
(Address Extension) address followed by a reason code, making offset-based
access error-prone.
Introduce typed packed C structs to represent the PERR frame layout:
- ieee80211_mesh_hwmp_perr: top-level frame containing TTL and
destination count
- ieee80211_mesh_hwmp_perr_dst: per-destination entry with optional AE
address and variable-position reason code
Add ieee80211_mesh_hwmp_perr_get_rcode() to locate the reason code in
each destination entry depending on whether the AE flag is set.
This refactoring makes the PERR processing code consistent with the
struct-based approach adopted for PREQ and PREP in preceding patches.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-3-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing PREP_IE_* macros access HWMP PREP frame fields via hardcoded
byte offsets. When the AE (Address Extension) flag is set, an additional
6 bytes appear mid-frame, making the offset arithmetic error-prone.
Introduce typed packed C structs to represent the PREP frame layout:
- ieee80211_mesh_hwmp_prep_top: fixed fields before the optional AE
address
- ieee80211_mesh_hwmp_prep_bottom: fields after the optional AE address
Add ieee80211_mesh_hwmp_prep_get_bottom() to locate the bottom struct
correctly based on whether the AE flag is set.
This preparatory refactoring is needed to fix a 2-byte overread of
orig_addr in hwmp_prep_frame_process() when AE is enabled, which is
addressed in a subsequent patch.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-2-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing PREQ_IE_* macros access HWMP PREQ frame fields via hardcoded
byte offsets. When the AE (Address Extension) flag is set, an additional
6 bytes appear mid-frame, and the macros handle this with conditional
arithmetic (e.g., AE_F_SET(x) ? x + N+6 : x + N). This approach
obscures the frame layout and is prone to miscalculation.
Introduce typed packed C structs to represent the PREQ frame layout:
- ieee80211_mesh_hwmp_preq_top: fixed fields before the optional AE
address
- ieee80211_mesh_hwmp_preq_bottom: fields after the optional AE address
- ieee80211_mesh_hwmp_preq_target: per-target fields
Add ieee80211_mesh_hwmp_preq_get_bottom() to locate the bottom struct
correctly based on whether the AE flag is set.
This preparatory refactoring is needed to fix a 2-byte overread of
target_addr in hwmp_preq_frame_process() when AE is enabled, which is
addressed in a subsequent patch.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-1-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a non-MLD station associates with an MLD AP, it does so on a
specific link. However, sta_set_sinfo() never sets mlo_params_valid,
so nl80211 never emits NL80211_ATTR_MLO_LINK_ID in get_station /
dump_station responses. Userspace has no way to determine which link
a non-MLD STA is associated on.
Set mlo_params_valid to 1 and assoc_link_id to sta->deflink.link_id,
when valid_links is set.
Also set the mld_addr copy only for MLD STAs, so that non-MLD STAs
get a zeroed mld_addr as documented.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260528105042.835284-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When parsing the radiotap header of an injected frame,
ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value
directly as a shift count:
info->control.antennas |= BIT(*iterator.this_arg);
*iterator.this_arg is an 8-bit value taken straight from the frame
supplied by userspace, so BIT() can be asked to shift by up to 255. That
is undefined behaviour on the unsigned long and is reported by UBSAN:
UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30
shift exponent 235 is too large for 64-bit type 'unsigned long'
Call Trace:
ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174
ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451
...
packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109
info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna
indices 0 and 1 can ever be represented. Ignore any larger value instead
of shifting out of bounds.
Reported-by: syzbot+8e0622f6d9446420271f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8e0622f6d9446420271f
Fixes: ef246a1480 ("wifi: mac80211: support antenna control in injection")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260531011721.102941-1-kartikey406@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we try to assign a chanctx to a link, if
ieee80211_find_or_create_chanctx() failed, we try to evacuate a NAN
channel and call it again.
This logic is broken:
In case there are not enough chanctxs we will fail earlier,
when we check ieee80211_check_combinations().
To fix this, do the following in case ieee80211_check_combinations()
failed:
- check if there is a NAN channel that can be evacuated
- make ieee80211_check_combinations() not consider the chanctx of that NAN
channel, so we pretend that it was already evacuated
- If now ieee80211_check_combinations() is successful, we know that it
helped, and we can remove that NAN channel for real.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260527224745.5f7b10505145.I1712bc64f9eec9c99f05994208ad124624a29f1c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes, ieee80211_check_combinations fails, but it is hard to know
why exactly. We will have to return an array of reasons, one per
combination.
In cases where we want to check if it failed because there are not
enough chanctxs (and maybe remove one if needed), we can just not fill
in that chanctx(s) in iface_combination_params::num_different_channels
in ieee80211_fill_ifcomb_params, so that chanctx(s) won't be taken into
account.
To allow that, add an option to pass a callback to
ieee80211_fill_ifcomb_params. This callback will be called for each
chanctx we consider to count in num_different_channels and will return
whether or not this chanctx should be skipped and not counted.
This mechanism will be used later.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260527224745.0042232f996e.I5d323125e34f3b253510e85ceb7a770d59f689fb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add KUnit coverage for ieee80211_parse_neg_ttlm() to lock the sparse
link_map_presence layout against future regressions.
The sparse_presence_no_oob_read case crafts a negotiated TTLM element
with link_map_presence = BIT(0) | BIT(7) and bm_size = 2 in a buffer
sized exactly to the validated element length. Without the parser
fix this would read 14 bytes past the buffer when processing TID 7;
under KASAN that is a slab-out-of-bounds report.
The dense_presence_baseline case crafts a fully populated
link_map_presence = 0xff element to confirm that the cursor-advance
fix does not regress the path that was already correct.
Export ieee80211_parse_neg_ttlm via VISIBLE_IF_MAC80211_KUNIT so the
test can call it directly.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260515151719.1317659-3-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Not much going on here right now:
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
* tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
ARM: dts: omap2: add stlc4560 spi-wireless node
p54spi: convert to devicetree
dt-bindings: net: add st,stlc4560/p54spi binding
wifi: mac80211: allow cipher change on NAN_DATA interfaces
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
wifi: cfg80211: add a function to parse UHR DBE
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
wifi: mac80211: Allow per station GTK for NAN Data interfaces
wifi: mac80211_hwsim: advertise NPCA capability
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
wifi: plfxlc: use module_usb_driver() macro
wifi: mac80211: don't recalc min def for S1G chan ctx
wifi: mac80211: skip NSS and BW init for S1G sta
wifi: mac80211: check stations are removed before MLD change
wifi: rt2x00: allocate anchor with rt2x00dev
====================
Link: https://patch.msgid.link/20260521153519.380276-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513182548.6a25f3a0a6ec.I83d1f2a7eed20200a78a62757c6b193e3bab892b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
__ieee80211_recalc_chanctx_min_def() currently does not attempt
to find the min def for S1G widths, meaning the BW will never change.
However, the following call into ieee80211_chan_bw_change() will
lead to a WARN within ieee80211_chan_width_to_rx_bw(). Not only that,
this entire path is geared towards 20MHz based channels, so it doesn't
make sense anyway. For now, return early when calculating the mindef
for S1G channels.
Fixes: d879d4da45 ("wifi: mac80211: clean up initial STA NSS/bandwidth handling")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260506131925.2088353-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no S1G STA bandwidth support throughout mac80211
as existing support is all based on 20MHz widths. With the recent
STA NSS/BW handling rework, S1G associations now hit the new WARN within
ieee80211_chan_width_to_rx_bw() as the chandef is not a 20MHz based
width. For now, skip initialisating link_sta->pub->bandwidth for
S1G chandefs to avoid the WARN though this should at some point be
properly implemented since there are vendors that offer differing
maximum bandwidths.
Additionally, currently all S1G hardware out there is 1SS so rather
then introducing new parsing code which wouldn't be used anyway, just
initialise the NSS related fields to 1 and skip initialising the STA
bandwidth for S1G chandefs within ieee80211_sta_init_nss_bw_capa().
Fixes: d879d4da45 ("wifi: mac80211: clean up initial STA NSS/bandwidth handling")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260506131925.2088353-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If an interface changes to/from MLD, then all stations related
to it must have been removed first. This is just natural since
we go from having links to not (or vice versa), but not doing
so also causes crashes in debugfs since vif changing to/from
MLD removes the entire debugfs for the vif, including stations.
Delete all stations but warn in this case, other code should
be handling it, in effect fail fast rather than doing a double
free or use-after-free in debugfs.
Link: https://patch.msgid.link/20260505151731.3d7cbb8b952c.I4ce7b536e8af26d7b115e82fd733734446cc56a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present.
Fixes: 8f500fbc6c ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260515151719.1317659-2-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory.
Fixes: 3468e1e0c6 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260509043427.60322-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When parsing a beacon, mac80211 erroneously inherits any
reconfiguration or EPCS multi-link elements from the outer
elements into the multi-BSSID profile that's requested, if
connected to a non-transmitted BSS, unless that profile
has a non-inheritance element.
This also happens if parsing a multi-BSSID profile that
doesn't have a non-inheritance element.
Fix this by having an empty non-inheritance element so
cfg80211_is_element_inherited() is invoked in these cases
and causes the parser to skip the elements that should
never be inherited.
Fixes: cf36cdef10 ("wifi: mac80211: Add support for parsing Reconfiguration Multi Link element")
Fixes: 24711d60f8 ("wifi: mac80211: Support parsing EPCS ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260508091032.92184c0a3f08.I3c43b0b63d2cef8a4ddddaef1c2faaeb1de711ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines.
Fixes: 4d70e9c548 ("wifi: mac80211: defragment reconfiguration MLE when parsing")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260508091031.8a6c34613178.I4de16ebbce2d27f2f8f98fc49949c7a376c2fe8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In client mode, the extended capabilities are handled by the kernel
looking at the association frame. When the supplicant installs the keys
it calls sta_apply_parameters and it doesn't include the extended
capabilities since those can't change after association.
As a result, we overrode the max_amsdu_subframes that we set after
association.
Check that the ext_capa coming from the user space is valid before
looking at it. If the ext_capa is NULL, it really means that the
extended capabilities are not changed (as opposed to cleared).
The default value for max_amsdu_subframes is 0, which means there is no
limit. This value is valid and in case the association response frame
does not have extended capabilities, this is the value we should use.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221079
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513170623.828dbb58c782.Ifd2bfc190c26140e919127adb02ffddd7b551499@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jakub Kicinski
Tamizh Chelvam Raja
Rosen Penev
Nathan Chancellor
傅继晗
Ilan Peer
Johannes Berg
Lachlan Hodges
Masashi Honma
Felix Fietkau
Deepanshu Kartikey
Miri Korenblit
Michael Bommarito
Daniel Gabay
Zhao Li
Emmanuel Grumbach