[ Upstream commit ad084a6d99 ]
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only
(so far only MSI Wind U90/U100). There are, however, a few issues with
the implementation:
1. The initial HW state is always unblocked, regardless of the actual
state on boot, because msi_init_rfkill only sets the SW state,
regardless of ec_read_only.
2. The initial SW state corresponds to the actual state on boot, but it
can't be changed afterwards, because set_device_state returns
-EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth
unusable if it was blocked on boot, and breaking the airplane mode if
the rfkill was unblocked on boot.
Address the above issues by properly initializing the HW state on
ec_read_only laptops and by allowing the userspace to toggle the SW
state. Don't set the SW state ourselves and let the userspace fully
control it. Toggling the SW state is a no-op, however, it allows the
userspace to properly toggle the airplane mode. The actual SW radio
disablement is handled by the corresponding rtl818x_pci and btusb
drivers that have their own rfkills.
Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130.
Fixes: 0816392b97 ("msi-laptop: merge quirk tables to one")
Fixes: 0de6575ad0 ("msi-laptop: Add MSI Wind U90/U100 support")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230721145423.161057-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 028e6e204a ]
The while-loop may break on one of the two conditions, either ID string
is empty or GUID matches. The second one, may never be reached if the
parsed string is not correct GUID. In such a case the loop will never
advance to check the next ID.
Break possible infinite loop by factoring out guid_parse_and_compare()
helper which may be moved to the generic header for everyone later on
and preventing from similar mistake in the future.
Interestingly that firstly it appeared when WMI was turned into a bus
driver, but later when duplicated GUIDs were checked, the while-loop
has been replaced by for-loop and hence no mistake made again.
Fixes: a48e23385f ("platform/x86: wmi: add context pointer field to struct wmi_device_id")
Fixes: 844af950da ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621151155.78279-1-andriy.shevchenko@linux.intel.com
Tested-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 362c1f2ec8 ]
On ASUS GU604V the key 0x7B is issued when the charger is connected or
disconnected, and key 0xC0 is issued when an external display is
connected or disconnected.
This commit maps them to KE_IGNORE to slience kernel messages about
unknown keys, such as:
kernel: asus_wmi: Unknown key code 0x7b
Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 539e0a7f91 ]
Currently, event completion work-items are restricted to be run strictly
in non-parallel fashion by the respective workqueue. However, this has
lead to some problems:
In some instances, the event notifier function called inside this
completion workqueue takes a non-negligible amount of time to execute.
One such example is the battery event handling code (surface_battery.c),
which can result in a full battery information refresh, involving
further synchronous communication with the EC inside the event handler.
This is made worse if the communication fails spuriously, generally
incurring a multi-second timeout.
Since the event completions are run strictly non-parallel, this blocks
other events from being propagated to the respective subsystems. This
becomes especially noticeable for keyboard and touchpad input, which
also funnel their events through this system. Here, users have reported
occasional multi-second "freezes".
Note, however, that the event handling system was never intended to run
purely sequentially. Instead, we have one work struct per EC/SAM
subsystem, processing the event queue for that subsystem. These work
structs were intended to run in parallel, allowing sequential processing
of work items for each subsystem but parallel processing of work items
across subsystems.
The only restriction to this is the way the workqueue is created.
Therefore, replace create_workqueue() with alloc_workqueue() and do not
restrict the maximum number of parallel work items to be executed on
that queue, resolving any cross-subsystem blockage.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Link: https://github.com/linux-surface/linux-surface/issues/1026
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230525210110.2785470-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbb320bfe2 ]
Stop restricting the PCI search to a range of PCI domains fed to
pci_get_domain_bus_and_slot(). Instead, use for_each_pci_dev() and
look at all PCI domains in one pass.
On systems with more than 8 sockets, this avoids error messages like
"Information: Invalid level, Can't get TDP control information at
specified levels on cpu 480" from the intel speed select utility.
Fixes: aa2ddd2425 ("platform/x86: ISST: Use numa node id for cpu pci dev mapping")
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230519160420.2588475-1-steve.wahl@hpe.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a1aac8a96 ]
On a multiple package system using Sub-NUMA clustering, there is an issue
in mapping Linux CPU number to PUNIT PCI device when manufacturer decided
to reuse the PCI bus number across packages. Bus number can be reused as
long as they are in different domain or segment. In this case some CPU
will fail to find a PCI device to issue SST requests.
When bus numbers are reused across CPU packages, we are using proximity
information by matching CPU numa node id to PUNIT PCI device numa node
id. But on a package there can be only one PUNIT PCI device, but multiple
numa nodes (one for each sub cluster). So, the numa node ID of the PUNIT
PCI device can only match with one numa node id of CPUs in a sub cluster
in the package.
Since there can be only one PUNIT PCI device per package, if we match
with numa node id of any sub cluster in that package, we can use that
mapping for any CPU in that package. So, store the match information
in a per package data structure and return the information when there
is no match.
While here, use defines for max bus number instead of hardcoding.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220629194817.2418240-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: bbb320bfe2 ("platform/x86: ISST: Remove 8 socket limit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e9b8992b1 ]
The purpose of this patch is to provide a central location where all
HP related drivers are found. HP drivers will recide under
drivers/platform/x86/hp directory.
Introduce changes to Kconfig file to list all HP driver under "HP X86
Platform Specific Device Drivers" menu option. Additional changes
include update MAINTAINERS file to indicate hp related drivers new
path.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20221020201033.12790-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: decab2825c ("platform/x86: hp-wmi: add micmute to hp_wmi_keymap struct")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf5ac2d45f ]
acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument
specifying that the pins direction should be initialized to a specific
value.
This means that in some cases the pins might be left in input mode, causing
the gpiod_set() calls made to enable the clk / regulator to not work.
One example of this problem is the clk-enable GPIO for the ov01a1s sensor
on a Dell Latitude 9420 being left in input mode causing the clk to
never get enabled.
Explicitly set the direction of the pins to output to fix this.
Fixes: 5de691bffe ("platform/x86: Add intel_skl_int3472 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111201426.947853-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2f9fbc247 ]
The intel_skl_int3472.ko module contains 2 separate drivers,
the int3472_discrete platform driver and the int3472_tps68470
I2C-driver.
These 2 drivers contain very little shared code, only
skl_int3472_get_acpi_buffer() and skl_int3472_fill_cldb() are
shared.
Split the module into 2 drivers, linking the little shared code
directly into both.
This will allow us to add soft-module dependencies for the
tps68470 clk, gpio and regulator drivers to the new
intel_skl_int3472_tps68470.ko to help with probe ordering issues
without causing these modules to get loaded on boards which only
use the int3472_discrete platform driver.
While at it also rename the .c and .h files to remove the
cumbersome intel_skl_int3472_ prefix.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-8-hdegoede@redhat.com
Stable-dep-of: cf5ac2d45f ("platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb5755100a ]
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the
slp_s0_residency attribute has been reporting the wrong value. Unlike other
platforms, ADL PCH does not have a counter for the time that the SLP_S0
signal was asserted. Instead, firmware uses the aggregate of the Low Power
Mode (LPM) substate counters as the S0ix value. Since the LPM counters run
at a different frequency, this lead to misreporting of the S0ix time.
Add a check for Alder Lake PCH and adjust the frequency accordingly when
display slp_s0_residency.
Fixes: bbab31101f ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit abce209d18 upstream.
Using the serio subsystem now requires the code to be reachable:
x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'
Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.
Fixes: 8e60615e89 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e60615e89 upstream.
By default when the system is configured for low power idle in the FADT
the keyboard is set up as a wake source. This matches the behavior that
Windows uses for Modern Standby as well.
It has been reported that a variety of AMD based designs there are
spurious wakeups are happening where two IRQ sources are active.
For example:
```
PM: Triggering wakeup from IRQ 9
PM: Triggering wakeup from IRQ 1
```
In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard.
One way to trigger this problem is to suspend the laptop and then unplug
the AC adapter. The SOC will be in a hardware sleep state and plugging
in the AC adapter returns control to the kernel's s2idle loop.
Normally if just IRQ 9 was active the s2idle loop would advance any EC
transactions and no other IRQ being active would cause the s2idle loop
to put the SOC back into hardware sleep state.
When this bug occurred IRQ 1 is also active even if no keyboard activity
occurred. This causes the s2idle loop to break and the system to wake.
This is a platform firmware bug triggering IRQ1 without keyboard activity.
This occurs in Windows as well, but Windows will enter "SW DRIPS" and
then with no activity enters back into "HW DRIPS" (hardware sleep state).
This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It
does not happen on newer systems such as Mendocino or Rembrandt.
It's been fixed in newer platform firmware. To avoid triggering the bug
on older systems check the SMU F/W version and adjust the policy at suspend
time for s2idle wakeup from keyboard on these systems. A lot of thought
and experimentation has been given around the timing of disabling IRQ1,
and to make it work the "suspend" PM callback is restored.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1951
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230120191519.15926-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ This has been hand modified for missing dependency commits. ]
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1921#note_1770257
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40635cd32f upstream.
The amd_pmc_get_smu_version() and amd_pmc_idlemask_read() functions are
used in the probe / suspend/resume code, so they are also used when
CONFIG_DEBUGFS is disabled, move them outside of the #ifdef CONFIG_DEBUGFS
block.
Note this purely moves the code to above the #ifdef CONFIG_DEBUGFS,
the code is completely unchanged.
Fixes: f6045de1f5 ("platform/x86: amd-pmc: Export Idlemask values based on the APU")
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4b7f8febd upstream.
The Lenovo Legion 5 15ARH05 needs ideapad-laptop to call SALS_FNLOCK_ON /
SALS_FNLOCK_OFF on Fn-lock state change to get the LED in the Fn key to
correctly reflect the Fn-lock state.
Add a DMI match for the Legion 5 15ARH05 to the set_fn_lock_led_list[]
table for this.
Fixes: 81a5603a0f ("platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221215154357.123876-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1af7fef0d9 upstream.
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.
Also correctly set the initial SW_CAMERA_LENS_COVER value.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae0fa0a312 upstream.
It is possible that we (the host/kernel driver) receive command messages
that are not intended for us. Ignore those for now.
The whole story is a bit more complicated: It is possible to enable
debug output on SAM, which is sent via SSH command messages. By default
this output is sent to a debug connector, with its own target ID
(TID=0x03). It is possible to override the target of the debug output
and set it to the host/kernel driver. This, however, does not change the
original target ID of the message. Meaning, we receive messages with
TID=0x03 (debug) but expect to only receive messages with TID=0x00
(host).
The problem is that the different target ID also comes with a different
scope of request IDs. In particular, these do not follow the standard
event rules (i.e. do not fall into a set of small reserved values).
Therefore, current message handling interprets them as responses to
pending requests and tries to match them up via the request ID. However,
these debug output messages are not in fact responses, and therefore
this will at best fail to find the request and at worst pass on the
wrong data as response for a request.
Therefore ignore any command messages not intended for us (host) for
now. We can implement support for the debug messages once we have a
better understanding of them.
Note that this may also provide a bit more stability and avoid some
driver confusion in case any other targets want to talk to us in the
future, since we don't yet know what to do with those as well. A warning
for the dropped messages should suffice for now and also give us a
chance of discovering new targets if they come along without any
potential for bugs/instabilities.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dc485f994 upstream.
Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.
For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.
So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9a8aadcf0b ]
`cros_typec_get_switch_handles` allocates four pointers when obtaining
type-c switch handles. These pointers are all freed if failing to obtain
any of them; therefore, pointers in `port` become stale. The stale
pointers eventually cause use-after-free or double free in later code
paths. Zeroing out all pointer fields after freeing to eliminate these
stale pointers.
Fixes: f28adb41da ("platform/chrome: cros_ec_typec: Register Type C switches")
Fixes: 1a8912caba ("platform/chrome: cros_ec_typec: Get retimer handle")
Signed-off-by: Victor Ding <victording@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221207093924.v2.1.I1864b6a7ee98824118b93677868d22d3750f439b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Mikityanskiy
Andy Shevchenko
Barnabás Pőcze
Alexandru Sorodoc
Maximilian Luz
Julian Winkler
Steve Wahl
Srinivas Pandruvada
Dan Carpenter
Fae
Jorge Lopez
Daniel Houldsworth
Andrey Avdeev
Hans de Goede
Frank Crawford
Mark Pearson
Armin Wolf
Rajvi Jingar
Tzung-Bi Shih
Randy Dunlap
Arnd Bergmann
Mario Limonciello
Sanket Goswami
Kevin Kuriakose
Koba Ko
Michael Klein
James Hurley
Yang Yingliang
Yu Liao
Victor Ding