Pull media fixes from Mauro Carvalho Chehab:
- honour privacy led with pdx86/int3472
- fix invalid file access on cx18 and ivtv
- forbid remove_bufs when legacy fileio is active on videbuf2
- add an heuristic to find stream entity on uvcvideo
* tag 'media/v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2: forbid remove_bufs when legacy fileio is active
media: uvcvideo: Use heuristic to find stream entity
media: v4l2-subdev / pdx86: int3472: Use "privacy" as con_id for the privacy LED
media: ivtv: Fix invalid access to file *
media: cx18: Fix invalid access to file *
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.
Cc: stable@vger.kernel.org
Fixes: 1e5d088a52 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
During DT-binding review for extending the V4L2 camera sensor privacy LED
support to systems using devicetree, it has come up that having a "-led"
suffix for the LED name / con_id is undesirable since it already is clear
that it is a LED.
Drop the "-led" suffix from the con_id in both the lookup table in
the int3472 code, as well as from the con_id led_get() argument in
the v4l2-subdev code.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting
the following warning when the BlueField-3 SOC is booted:
BUG: key ffff00008a3402a8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0
<snip>
Call trace:
lockdep_init_map_type+0x1d4/0x2a0
__kernfs_create_file+0x84/0x140
sysfs_add_file_mode_ns+0xcc/0x1cc
internal_create_group+0x110/0x3d4
internal_create_groups.part.0+0x54/0xcc
sysfs_create_groups+0x24/0x40
device_add+0x6e8/0x93c
device_register+0x28/0x40
__hwmon_device_register+0x4b0/0x8a0
devm_hwmon_device_register_with_groups+0x7c/0xe0
mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc]
platform_probe+0x70/0x110
The mlxbf_pmc driver must call sysfs_attr_init() during the
initialization of the "count_clock" data structure to avoid
this warning.
Fixes: 5efc800975 ("platform/mellanox: mlxbf-pmc: Add support for monitoring cycle count")
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://patch.msgid.link/20251013155605.3589770-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64:
- thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472:
- Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi:
- Add WMI driver for Redmibook keyboard
- think-lmi:
- Certificate support for ThinkCenter
- x86-android-tables + others:
- Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: pcengines-apuv2: Use static device properties
platform/x86: meraki-mx100: Use static device properties
platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
platform/x86: x86-android-tablets: Move Acer info to its own file
platform/x86: x86-android-tablets: Update my email address
platform/x86: x86-android-tablets: Simplify node-group [un]registration
platform/x86: x86-android-tablets: use swnode_group instead of manual registering
platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
platform/x86: x86-android-tablets: remove support for GPIO lookup tables
platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
platform/x86: x86-android-tablets: convert EDT devices to GPIO references
platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
...
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
Pull x86 cpuid updates from Borislav Petkov:
- Make UMIP instruction detection more robust
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
* tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
x86/umip: Check that the instruction opcode is at least two bytes
Documentation/x86/topology: Detail CPUID leaves used for topology enumeration
x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR
x86/cpu/topology: Check for X86_FEATURE_XTOPOLOGY instead of passing has_xtopology
x86/cpu/cacheinfo: Simplify cacheinfo_amd_init_llc_id() using _cpuid4_info
x86/cpu: Rename and move CPU model entry for Diamond Rapids
x86/cpu: Detect FreeBSD Bhyve hypervisor
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New HW Supoort
- amd/pmc: Use 8042 quirk for Stellaris Slim Gen6 AMD
- dell: Set USTT mode according to BIOS after reboot
- dell-lis3lv02d: Add Latitude E6530
- lg-laptop: Fix setting the fan mode"
* tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lg-laptop: Fix WMAB call in fan_mode_store()
platform/x86: dell-lis3lv02d: Add Latitude E6530
platform/x86/dell: Set USTT mode according to BIOS after reboot
platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list
Convert the Meraki MX100 board driver to use software nodes and static
device properties to describe the on-board LEDs and reset button.
This moves away from the legacy gpiod_lookup_table and platform_data
mechanisms, allowing consumer drivers like leds-gpio and gpio-keys
to rely on the unified device properties interface instead of
board-specific data.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/dzecghqrsrbe74akboqih7xculdm53rbhxa7dimt2ysdevyskd@hxhd2j3vnlt5
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2 fixes for Lenovo tablets:
- The bq24190 charger on the Lenovo Yoga Tab2 830/1050 devices does not use
the crystal-cove PMIC charger IRQ, so these shouldn't use bq24190_modules
as that includes "intel_crystal_cove_charger"
- Both the Tab2 and the Tab3 devices have a SPI audio-codec which init()
attaches properties to, resp. the whole SPI device gets instantiated by
the x86-android-tablets code. This requires the "spi_pxa2xx_platform"
module to be loaded before init() runs
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-20-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for the Acer Iconia One 8 A1-840 (non FHD version) tablet.
This tablet has the usual issues for tablets shipped with Android as
factory OS. The DSDT is broken in various ways, so i2c_clients for
various devices as well as the INT3496 platform-device for OTG extcon
handling need to be instantiated manually by x86-android-tablets.
This tablet is special in that it is the first time a Bay Trail device
has been found to use the Dollar Cove TI PMIC and the first time that
the PMIC's Coulomb Counter is used as fuel-gauge.
So far this PMIC has only been used together with Cherry Trail SoCs
and always in combination with a separate full-featured fuel-gauge IC.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-18-hansg@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
software_node_register_node_group() / software_node_unregister_node_group()
both accept a NULL node-group as argument.
So there is no need to check for the node-group being NULL before calling
these functions, remove the checks to simplify the code.
Note the "if (gpio_button_swnodes)" check for registering is kept because
that also guards the creation of a gpio-button platform-device.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-15-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Now that gpiolib supports software nodes to describe GPIOs, switch the
driver away from using GPIO lookup tables for wm1502 devices to using
PROPERTY_ENTRY_GPIO().
Adding a swnode to the yt3 spi device changes the name of the SPI/codec
device and the sound/soc/intel/boards/bytcr_wm5102.c machine driver looks
up the code by name, update the machine driver to use the new name.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-8-hansg@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Now that gpiolib supports software nodes to describe GPIOs, switch the
driver away from using GPIO lookup tables for Goodix touchscreens to
using PROPERTY_ENTRY_GPIO() to keep all touchscreen properties together.
Since the tablets are using either Baytrail or Cherryview GPIO
controllers x86_dev_info structure has been extended to carry gpiochip
type information so that the code can instantiate correct set of
software nodes representing the GPIO chip.
Because this adds a new point of failure in x86_android_tablet_probe(),
x86_android_tablet_remove() is rearranged to handle cases where battery
swnode has not been registered yet, and registering of GPIO lookup
tables is moved earlier as it can not fail.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-2-hansg@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Introduce EC driver for the ThinkPad T14s Gen6 Snapdragon, which is in
theory compatible with ThinkPad ACPI. On Linux the system is booted with
device tree, which is not supported by the ThinkPad ACPI driver
(drivers/platform/x86/lenovo/thinkpad_acpi.c). Also most of the hardware
compatibility is handled via ACPI tables, which are obviously not used
when booting via device tree. Thus adding DT compatibility to the
existing driver is not worth it as there is almost no code sharing.
The driver currently exposes features, which are not available
via other means:
* Extra Keys
* System LEDs
* Keyboard Backlight Control
The driver has been developed by reading the ACPI DSDT. There
are some more features around thermal control, which are not
yet supported by the driver.
The speaker mute and mic mute LEDs need some additional changes
in the ALSA UCM to be set automatically.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on Thinkpad T14S OLED
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://patch.msgid.link/20250918-thinkpad-t14s-ec-v5-2-ac0bc6382c5c@collabora.com
[ij: folded in patch from Chen Ni <nichen@iscas.ac.cn>]
Link: https://patch.msgid.link/20250926091302.817919-1-nichen@iscas.ac.cn
[ij: folded in patch from Lukas Bulwahn <lbulwahn@redhat.com>]
Link: https://patch.msgid.link/20250926071859.138396-1-lukas.bulwahn@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When WMAB is called to set the fan mode, the new mode is read from either
bits 0-1 or bits 4-5 (depending on the value of some other EC register).
Thus when WMAB is called with bits 4-5 zeroed and called again with
bits 0-1 zeroed, the second call undoes the effect of the first call.
This causes writes to /sys/devices/platform/lg-laptop/fan_mode to have
no effect (and causes reads to always report a status of zero).
Fix this by calling WMAB once, with the mode set in bits 0,1 and 4,5.
When the fan mode is returned from WMAB it always has this form, so
there is no need to preserve the other bits. As a bonus, the driver
now supports the "Performance" fan mode seen in the LG-provided Windows
control app, which provides less aggressive CPU throttling but louder
fan noise and shorter battery life.
Also, correct the documentation to reflect that 0 corresponds to the
default mode (what the Windows app calls "Optimal") and 1 corresponds
to the silent mode.
Fixes: dbf0c5a6b1 ("platform/x86: Add LG Gram laptop special features driver")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204913#c4
Signed-off-by: Daniel Lee <dany97@live.ca>
Link: https://patch.msgid.link/MN2PR06MB55989CB10E91C8DA00EE868DDC1CA@MN2PR06MB5598.namprd06.prod.outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
- amd/pmf: Support new ACPI ID AMDI0108
- asus-wmi: Re-add extra keys to ignore_key_wlan quirk
- oxpec: Add support for AOKZOE A1X and OneXPlayer X1Pro EVA-02"
* tag 'platform-drivers-x86-v6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Re-add extra keys to ignore_key_wlan quirk
platform/x86/amd/pmf: Support new ACPI ID AMDI0108
platform/x86: oxpec: Add support for AOKZOE A1X
platform/x86: oxpec: Add support for OneXPlayer X1Pro EVA-02
platform/x86/amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
This model was added as INTEL_PANTHERCOVE_X (based on the name of the
core) with a comment that the platform name is Diamond Rapids. It was
also placed at the end of the file in a new section for family 19
processors.
This is different from previous naming as Andrew Cooper noted.
PeterZ agreed and posted a patch[1] to fix the name and move it in
sequence with other Xeon servers. But without a commit description or
sign-off the patch wasn't ever applied.
Patch updated to cover one additional use of the #define by turbostat
and to change the "Family 6" comment to also list 18 and 19 since new
models in these families are mixed in with family 6.
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/all/20250214130205.GK14028@noisy.programming.kicks-ass.net/ # [1]
Introduce a `registered` flag to the `struct cros_ec_device` to allow
callers to determine if the device has been fully registered and is
ready for use.
This is a preparatory step to prevent race conditions where other drivers
might try to access the device before it is fully registered or after
it has been unregistered.
Link: https://lore.kernel.org/r/20250828083601.856083-5-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Move the initialization of the `struct cros_ec_device` from
cros_ec_register() into cros_ec_device_alloc().
This decouples device initialization from registration. By doing so,
the per-device lock is now available immediately after allocation,
allowing it to be used safely even before the device is fully
registered.
Link: https://lore.kernel.org/r/20250828083601.856083-4-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Move the common initialization from protocol device drivers into central
cros_ec_device_alloc().
This removes duplicated code from each driver's probe function.
The buffer sizes are now calculated once, using the maximum possible
overhead required by any of the transport protocols, ensuring the
allocated buffers are sufficient for all cases.
Link: https://lore.kernel.org/r/20250828083601.856083-3-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
