[ Upstream commit 6908c5f4f0 ]
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc87 ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d41d75fe1b ]
QAT devices perform an additional integrity check during compression by
decompressing the output. Starting from QAT GEN4, this verification is
done in-line by the hardware. However, on GEN2 devices, the hardware
reads back the compressed output from the destination buffer and performs
a decompression operation using it as the source.
In the current QAT driver, destination buffers are always marked as
write-only. This is incorrect for QAT GEN2 compression, where the buffer
is also read during verification. Since commit 6f5dc76580
("iommu/vt-d: Restore WO permissions on second-level paging entries"),
merged in v6.16-rc1, write-only permissions are strictly enforced, leading
to DMAR errors when using QAT GEN2 devices for compression, if VT-d is
enabled.
Mark the destination buffers as DMA_BIDIRECTIONAL. This ensures
compatibility with GEN2 devices, even though it is not required for
QAT GEN4 and later.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: cf5bb835b7 ("crypto: qat - fix DMA transfer direction")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d956692c7d ]
The ZUC-256 EEA (encryption) and EIA (integrity) algorithms are not
supported on QAT GEN5 devices, as their current implementation does not
align with the NIST specification. Earlier versions of the ZUC-256
specification used a different initialization scheme, which has since
been revised to comply with the 5G specification.
Due to this misalignment with the updated specification, remove support
for ZUC-256 EEA and EIA for QAT GEN5 by masking out the ZUC-256
capability.
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34b2836361 ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: d358f1abbf ("crypto: img-hash - Add Imagination Technologies hw hash accelerator")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01951a7dc5 ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 472b04444c ("crypto: keembay - Add Keem Bay OCS HCU driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb7fa6b6fc ]
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Fixes: c957f8b3e2 ("crypto: inside-secure - avoid unmapping DMA memory that was not mapped")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4abeccb8d ]
The __snp_alloc_firmware_pages() helper allocates pages in the firmware
state (alloc + rmpupdate). In case of failed rmpupdate, it tries
reclaiming pages with already changed state. This requires calling
the PSP firmware and since there is sev_cmd_mutex to guard such calls,
the helper takes a "locked" parameter so specify if the lock needs to
be held.
Most calls happen from snp_alloc_firmware_page() which executes without
the lock. However
commit 24512afa43 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
switched sev_fw_alloc() from alloc_pages() (which does not call the PSP) to
__snp_alloc_firmware_pages() (which does) but did not account for the fact
that sev_fw_alloc() is called from __sev_platform_init_locked()
(via __sev_platform_init_handle_tmr()) and executes with the lock held.
Add a "locked" parameter to __snp_alloc_firmware_pages().
Make sev_fw_alloc() use the new parameter to prevent potential deadlock in
rmp_mark_pages_firmware() if rmpupdate() failed.
Fixes: 24512afa43 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 254923ca87 ]
Change the logic in the restore function to properly handle bank
exceptions.
The check for exceptions in the saved state should be performed before
conducting any other ringstat register checks.
If a bank was saved with an exception, the ringstat will have the
appropriate rp_halt/rp_exception bits set, causing the driver to exit
the restore process with an error. Instead, the restore routine should
first check the ringexpstat register, and if any exception was raised,
it should stop further checks and return without any error. In other
words, if a ring pair is in an exception state at the source, it should
be restored the same way at the destination but without raising an error.
Even though this approach might lead to losing the exception state
during migration, the driver will log the exception from the saved state
during the restore process.
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Fixes: bbfdde7d19 ("crypto: qat - add bank save and restore flows")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53669ff591 ]
The commit ca88a2bdd4 ("crypto: qat - allow disabling SR-IOV VFs")
introduced an unnecessary change that prevented enabling SR-IOV when
IOMMU is disabled. In certain scenarios, it is desirable to enable
SR-IOV even in the absence of IOMMU. Thus, restoring the previous
functionality to allow VFs to be enumerated in the absence of IOMMU.
Fixes: ca88a2bdd4 ("crypto: qat - allow disabling SR-IOV VFs")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Michal Witwicki <michal.witwicki@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 442134ab30 ]
If an error occurs during queueing the engine load will never be
decremented. Fix this by moving the engine load adjustment into
the cleanup function.
Fixes: bf8f91e711 ("crypto: marvell - Add load balancing between engines")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cc871ad01 ]
The dc_data structure holds data required for handling compression
operations, such as overflow buffers. In this context, the use of
managed memory allocation APIs (devm_kzalloc() and devm_kfree())
is not necessary, as these data structures are freed and
re-allocated when a device is restarted in adf_dev_down() and
adf_dev_up().
Additionally, managed APIs automatically handle memory cleanup when the
device is detached, which can lead to conflicts with manual cleanup
processes. Specifically, if a device driver invokes the adf_dev_down()
function as part of the cleanup registered with
devm_add_action_or_reset(), it may attempt to free memory that is also
managed by the device's resource management system, potentially leading
to a double-free.
This might result in a warning similar to the following when unloading
the device specific driver, for example qat_6xxx.ko:
qat_free_dc_data+0x4f/0x60 [intel_qat]
qat_compression_event_handler+0x3d/0x1d0 [intel_qat]
adf_dev_shutdown+0x6d/0x1a0 [intel_qat]
adf_dev_down+0x32/0x50 [intel_qat]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
Use unmanaged memory allocation APIs (kzalloc_node() and kfree()) for
the dc_data structure. This ensures that memory is explicitly allocated
and freed under the control of the driver code, preventing manual
deallocation from interfering with automatic cleanup.
Fixes: 1198ae56c9 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6cd3cfb5a ]
In sun8i_ce_cipher_unprepare(), dma_unmap_sg() is incorrectly called with
the number of entries returned by dma_map_sg(), rather than using the
original number of entries passed when mapping the scatterlist.
To fix this, stash the original number of entries passed to dma_map_sg()
in the request context.
Fixes: 0605fa0f78 ("crypto: sun8i-ce - split into prepare/run/unprepare")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7e6804362 ]
The hardwrae is only capable of one hash at a time, so add a lock
to make sure that it isn't used concurrently.
Fixes: 7ecc3e3447 ("crypto: xilinx - Add Xilinx SHA3 driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc98d8ce93 ]
The req->base.data field is for the user and must not be touched by
the driver, unless you save it first.
The iaa driver doesn't seem to be using the req->base.data value
so just remove the assignment.
Fixes: 09646c98d0 ("crypto: iaa - Add irq support for the crypto async interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2c4e8b2287 upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
dh895xcc 0000:3f:00.0: qat_hal_clr_reset error
dh895xcc 0000:3f:00.0: Failed to init the AEs
dh895xcc 0000:3f:00.0: Failed to initialise Acceleration Engine
dh895xcc 0000:3f:00.0: Resetting device qat_dev0
dh895xcc 0000:3f:00.0: probe with driver dh895xcc failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9a6e9279b upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c6xx 0000:3f:00.0: qat_hal_clr_reset error
c6xx 0000:3f:00.0: Failed to init the AEs
c6xx 0000:3f:00.0: Failed to initialise Acceleration Engine
c6xx 0000:3f:00.0: Resetting device qat_dev0
c6xx 0000:3f:00.0: probe with driver c6xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: a6dabee6c8 ("crypto: qat - add support for c62x accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 845bc95202 upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
4xxx 0000:01:00.0: Failed to power up the device
4xxx 0000:01:00.0: Failed to initialize device
4xxx 0000:01:00.0: Resetting device qat_dev0
4xxx 0000:01:00.0: probe with driver 4xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 8c8268166e ("crypto: qat - add qat_4xxx driver")
Link: https://lore.kernel.org/all/Z-DGQrhRj9niR9iZ@gondor.apana.org.au/
Reported-by: Randy Wright <rwright@hpe.com>
Closes: https://issues.redhat.com/browse/RHEL-84366
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 097143f23a upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
420xx 0000:01:00.0: Failed to power up the device
420xx 0000:01:00.0: Failed to initialize device
420xx 0000:01:00.0: Resetting device qat_dev0
420xx 0000:01:00.0: probe with driver 420xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71e0cc1eab upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c3xxx 0000:3f:00.0: qat_hal_clr_reset error
c3xxx 0000:3f:00.0: Failed to init the AEs
c3xxx 0000:3f:00.0: Failed to initialise Acceleration Engine
c3xxx 0000:3f:00.0: Resetting device qat_dev0
c3xxx 0000:3f:00.0: probe with driver c3xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 890c55f4dc ("crypto: qat - add support for c3xxx accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0413bcf0fc upstream.
This driver tries to chain requests together before submitting them
to hardware in order to reduce completion interrupts.
However, it even extends chains that have already been submitted
to hardware. This is dangerous because there is no way of knowing
whether the hardware has already read the DMA memory in question
or not.
Fix this by splitting the chain list into two. One for submitted
requests and one for requests that have not yet been submitted.
Only extend the latter.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Fixes: 85030c5168 ("crypto: marvell - Add support for chaining crypto requests in TDMA mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c822831b42 ]
'struct ahash_request' has a flexible array at the end, so it must be the
last member in a struct, to avoid overwriting other struct members.
Therefore, move 'fallback_req' to the end of the 'sun8i_ce_hash_reqctx'
struct.
Fixes: 56f6d5aee8 ("crypto: sun8i-ce - support hash algorithms")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bafd82d9a ]
The user may set req->src even if req->nbytes == 0. If there
is no data to hash from req->src, do not generate an empty TDMA
descriptor.
Fixes: db509a4533 ("crypto: marvell/cesa - add TDMA support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a4e047c6c ]
Do not access random memory for zero-length skcipher requests.
Just return 0.
Fixes: f63601fd61 ("crypto: marvell/cesa - add a new driver for Marvell's CESA")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9334f42757 ]
The pm_runtime_use_autosuspend() call must be undone with
pm_runtime_dont_use_autosuspend() at driver exit, but this is not
currently handled in the driver.
To fix this issue and at the same time simplify error handling, switch
to devm_pm_runtime_enable(). It will call both pm_runtime_disable() and
pm_runtime_dont_use_autosuspend() during driver removal.
Fixes: 06f751b613 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dfc7cd74a ]
When testing sun8i-ss with multi_v7_defconfig, all CBC algorithm fail crypto
selftests.
This is strange since on sunxi_defconfig, everything was ok.
The problem was in the IV setup loop which never run because sg_dma_len
was 0.
Fixes: 359e893e8a ("crypto: sun8i-ss - rework handling of IV")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31adc3e35 ]
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path.
Fixes: 06f751b613 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea4dd134ef ]
Rework error handling in sun8i_ce_hash_run() to unmap the dma buffers in
case of failure. Currently, the dma unmap functions are not called if the
function errors out at various points.
Fixes: 56f6d5aee8 ("crypto: sun8i-ce - support hash algorithms")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit caa9dbb76f ]
While MXS_DCP_CONTROL0_OTP_KEY is set, the CRYPTO_KEY (DCP_PAES_KEY_OTP)
is used even if the UNIQUE_KEY (DCP_PAES_KEY_UNIQUE) is selected. This
is not clearly documented, but this implementation is consistent with
NXP's downstream kernel fork and optee_os.
Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64b7871522 ]
This patch addresses an issue where authentication failures were being
erroneously reported due to negative test failures in the "ccm(aes)"
selftest.
pr_debug suppress unnecessary screaming of these tests.
Signed-off-by: Shashank Gupta <shashankg@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ddaff40c0 ]
Modifying the crypto_request turns out to be not the right way to handle
the stale value issue with the IV. Though the IV is not used for AES ECB,
it eventually get used in algorithms like LRW in the next step after
AES ECB encryption/decryption. Setting req->iv to NULL breaks the
implementation of such algorithms. Hence modify only the local reqctx
to check for IV.
Fixes: bde5582208 ("crypto: tegra - Set IV to NULL explicitly for AES ECB")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cb328da4e ]
Allocate the buffer based on the request instead of a fixed buffer
length. In operations which may require larger buffer size, a fixed
buffer may fail.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 1ddaff40c0 ("crypto: tegra - Fix IV usage for AES ECB")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b90df7818 ]
Currently there is an unnecessary error check on ret without a proceeding
assignment to ret that needs checking. The check is redundant and can be
removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 1ddaff40c0 ("crypto: tegra - Fix IV usage for AES ECB")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 07bb097b92 upstream.
Currently, the ASP primary device check does not have support for PCI
domains, and, as a result, when the system is configured with PCI domains
(PCI segments) the wrong device can be selected as primary. This results
in commands submitted to the device timing out and failing. The device
check also relies on specific device and function assignments that may
not hold in the future.
Fix the primary ASP device check to include support for PCI domains and
to perform proper checking of the Bus/Device/Function positions.
Fixes: 2a6170dfe7 ("crypto: ccp: Add Platform Security Processor (PSP) device support")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1b284ffc30 ]
According to the HMAC RFC, the authentication key
can be 0 bytes, and the hardware can handle this
scenario. Therefore, remove the incorrect validation
for this case.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b00eb923f ]
The compiler correctly warns that hv_nxc may be used uninitialised
as that will occur when NX-GZIP is unavailable.
Fix it by rearranging the code and delay setting caps_feat until
the final query succeeds.
Fixes: b4ba22114c ("crypto/nx: Get NX capabilities for GZIP coprocessor type")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92c6a707d8 ]
The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bde5582208 ]
It may happen that the variable req->iv may have stale values or
zero sized buffer by default and may end up getting used during
encryption/decryption. This inturn may corrupt the results or break the
operation. Set the req->iv variable to NULL explicitly for algorithms
like AES-ECB where IV is not used.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce390d6c26 ]
Saving and restoring of the intermediate results are needed if there is
context switch caused by another ongoing request on the same engine.
This is therefore not only to support import/export functionality.
Hence, save and restore the intermediate result for every non-first task.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4f353cb7a ]
During encryption and decryption, user requests
must be checked first, if the specifications that
are not supported by the hardware are used, the
software computing is used for processing.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a49cc71e21 ]
The hardware only supports authentication sizes
that are 4-byte aligned. Therefore, the driver
switches to software computation in this case.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f80a2e2e77 ]
The intermediate results for HMAC is stored in the allocated keyslot by
the hardware. Dynamic allocation of keyslot during an operation is hence
not possible. As the number of keyslots are limited in the hardware,
fallback to the HMAC software implementation if keyslots are not available
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcfc8fc53f ]
The buffer which sends the commands to host1x was shared for all tasks
in the engine. This causes a problem with the setkey() function as it
gets called asynchronous to the crypto engine queue. Modifying the same
cmdbuf in setkey() will corrupt the ongoing host1x task and in turn
break the encryption/decryption operation. Hence use a separate cmdbuf
for setkey().
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9555d1808 ]
The field parerr_wat_wcp_mask in the structure adf_dev_err_mask enables
the detection and reporting of parity errors for the wireless cipher and
wireless authentication accelerators.
Set the parerr_wat_wcp_mask field, which was inadvertently omitted
during the initial enablement of the qat_420xx driver, to ensure that
parity errors are enabled for those accelerators.
In addition, fix the string used to report such errors that was
inadvertently set to "ath_cph" (authentication and cipher).
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc4bd01d9f ]
Test the correct flags for the MAY_SLEEP bit.
Fixes: 2ec6761df8 ("crypto: iaa - Add support for deflate-iaa compression algorithm")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
