[ Upstream commit a0647bca89 ]
When error is injected with the ERR_FORCE register, then this register
is not auto cleared on clearing the ERR_STATUS register. This causes
repeated interrupts on error injection. To fix, set the ERR_FORCE to
zero along with clearing the ERR_STATUS register after handling error.
Fixes: fc2f151d23 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5090ac9191 upstream.
The PMIC GLINK driver is currently generating DisplayPort hotplug
notifications whenever something is connected to (or disconnected from)
a port regardless of the type of notification sent by the firmware.
These notifications are forwarded to user space by the DRM subsystem as
connector "change" uevents:
KERNEL[1556.223776] change /devices/platform/soc@0/ae00000.display-subsystem/ae01000.display-controller/drm/card0 (drm)
ACTION=change
DEVPATH=/devices/platform/soc@0/ae00000.display-subsystem/ae01000.display-controller/drm/card0
SUBSYSTEM=drm
HOTPLUG=1
CONNECTOR=36
DEVNAME=/dev/dri/card0
DEVTYPE=drm_minor
SEQNUM=4176
MAJOR=226
MINOR=0
On the Lenovo ThinkPad X13s and T14s, the PMIC GLINK firmware sends two
identical notifications with orientation information when connecting a
charger, each generating a bogus DRM hotplug event. On the X13s, two
such notification are also sent every 90 seconds while a charger remains
connected, which again are forwarded to user space:
port = 1, svid = ff00, mode = 255, hpd_state = 0
payload = 01 00 00 00 00 00 00 ff 00 00 00 00 00 00 00 00
Note that the firmware only sends on of these when connecting an
ethernet adapter.
Fix the spurious hotplug events by only forwarding hotplug notifications
for the Type-C DisplayPort service id. This also reduces the number of
uevents from four to two when an actual DisplayPort altmode device is
connected:
port = 0, svid = ff01, mode = 2, hpd_state = 0
payload = 00 01 02 00 f2 0c 01 ff 03 00 00 00 00 00 00 00
port = 0, svid = ff01, mode = 2, hpd_state = 1
payload = 00 01 02 00 f2 0c 01 ff 43 00 00 00 00 00 00 00
Fixes: 080b4e2485 ("soc: qcom: pmic_glink: Introduce altmode support")
Cc: stable@vger.kernel.org # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Reported-by: Clayton Craft <clayton@craftyguy.net>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Link: https://lore.kernel.org/r/20250324132448.6134-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5caf03188 ]
The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250123181726.597144-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22af2fac88 ]
rtkit messages as communication with the DCP firmware for framebuffer
swaps or input events are time critical so use WQ_HIGHPRI to prevent
user space CPU load to increase latency.
With kwin_wayland 6's explicit sync mode user space load was able to
delay the IOMFB rtkit communication enough to miss vsync for surface
swaps. Minimal test scenario is constantly resizing a glxgears
Xwayland window.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-3-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c57930f68 ]
This does not necessarily get included through asm/io.h:
drivers/soc/samsung/exynos3250-pmu.c:120:18: error: use of undeclared identifier 'ARRAY_SIZE'
120 | for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
| ^
drivers/soc/samsung/exynos5250-pmu.c:162:18: error: use of undeclared identifier 'ARRAY_SIZE'
162 | for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
| ^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250305211446.43772-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2eeb03ad9f upstream.
When some client process A call pdr_add_lookup() to add the look up for
the service and does schedule locator work, later a process B got a new
server packet indicating locator is up and call pdr_locator_new_server()
which eventually sets pdr->locator_init_complete to true which process A
sees and takes list lock and queries domain list but it will timeout due
to deadlock as the response will queued to the same qmi->wq and it is
ordered workqueue and process B is not able to complete new server
request work due to deadlock on list lock.
Fix it by removing the unnecessary list iteration as the list iteration
is already being done inside locator work, so avoid it here and just
call schedule_work() here.
Process A Process B
process_scheduled_works()
pdr_add_lookup() qmi_data_ready_work()
process_scheduled_works() pdr_locator_new_server()
pdr->locator_init_complete=true;
pdr_locator_work()
mutex_lock(&pdr->list_lock);
pdr_locate_service() mutex_lock(&pdr->list_lock);
pdr_get_domain_list()
pr_err("PDR: %s get domain list
txn wait failed: %d\n",
req->service_name,
ret);
Timeout error log due to deadlock:
"
PDR: tms/servreg get domain list txn wait failed: -110
PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110
"
Thanks to Bjorn and Johan for letting me know that this commit also fixes
an audio regression when using the in-kernel pd-mapper as that makes it
easier to hit this race. [1]
Link: https://lore.kernel.org/lkml/Zqet8iInnDhnxkT9@hovoldconsulting.com/ # [1]
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
CC: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Co-developed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212163720.1577876-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 22b03a4e95 ]
Use device managed functions to simplify handling of failures during
probe. Remove fail paths which are no longer necessary.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: cf7139aac4 ("soc: imx8m: Unregister cpufreq and soc dev in cleanup path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c1c02fe8d ]
The static global soc_uid is only ever used as kasprintf() parameter in
imx8m_soc_probe(). Pass pointer to local u64 variable to .soc_revision()
callback instead and let the .soc_revision() callback fill in the content.
Remove the unnecessary static global variable.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: cf7139aac4 ("soc: imx8m: Unregister cpufreq and soc dev in cleanup path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 22cf4fae66 upstream.
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account.
Cc: stable@vger.kernel.org
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241230-qcom-socinfo-serialno-oob-v1-1-9b7a890da3da@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d3455ab798 ]
A device_node acquired via of_find_node_by_path() requires explicit
calls to of_node_put() when it is no longer needed to avoid leaking the
resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'np' by means of the __free()
macro, which automatically calls of_node_put() when the variable goes
out of scope.
Fixes: 960ddf70cc ("drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241031-soc-atmel-soc-cleanup-v2-1-73f2d235fd98@gmail.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some versions of the pmic_glink firmware does not allow dynamic GLINK
intent allocations, attempting to send a message before the firmware has
allocated its receive buffers and announced these intent allocations
will fail. When this happens something like this showns up in the log:
pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to send altmode request: 0x10 (-125)
pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to request altmode notifications: -125
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI read request: -125
qcom_battmgr.pmic_glink_power_supply pmic_glink.power-supply.0: failed to request power notifications
GLINK has been updated to distinguish between the cases where the remote
is going down (-ECANCELED) and the intent allocation being rejected
(-EAGAIN).
Retry the send until intent buffers becomes available, or an actual
error occur.
To avoid infinitely waiting for the firmware in the event that this
misbehaves and no intents arrive, an arbitrary 5 second timeout is
used.
This patch was developed with input from Chris Lew.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/Zqet8iInnDhnxkT9@hovoldconsulting.com/#t
Cc: stable@vger.kernel.org # rpmsg: glink: Handle rejected intent request better
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20241023-pmic-glink-ecancelled-v2-2-ebc268129407@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In success case, the revision holds a non-null pointer. The current
logic incorrectly returns an error for a non-null pointer, whereas
it should return an error for a null pointer.
The socinfo driver for IPQ9574 and IPQ5332 is currently broken,
resulting in the following error message
qcom-socinfo qcom-socinfo: probe with driver qcom-socinfo failed with
error -12
Add a null check for the revision to ensure it returns an error only in
failure case (null pointer).
Fixes: e694d2b5c5 ("soc: qcom: Add check devm_kasprintf() returned value")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016144852.2888679-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
FSL SOC fixes for v6.12:
- Fix a "cast to pointer from integer of different size" build error
due to IS_ERROR_VALUE() used with something which is not a pointer.
- Fix an unused data build warning.
* tag 'soc_fsl-6.12-3' of https://github.com/chleroy/linux:
soc: fsl: cpm1: qmc: Fix unused data compilation warning
soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers
Link: https://lore.kernel.org/r/c954bdb0-0c16-491a-8662-37e58f07208f@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On most modern qualcomm SoCs, the configuration necessary to enable the
Tag/Data RAM related irqs being propagated to the SoC irq controller is
already done in firmware (in DSF or 'DDR System Firmware')
On some like the x1e80100, these registers aren't even accesible to the
kernel causing a crash when edac device is probed.
Hence, make the irq configuration optional in the driver and mark x1e80100
as the SoC on which this should be avoided.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240903101510.3452734-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
ppc64_book3e_allmodconfig:
drivers/soc/fsl/qe/qmc.c: In function ‘qmc_qe_init_resources’:
include/linux/err.h:28:49: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
28 | #define IS_ERR_VALUE(x) unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO)
| ^
include/linux/compiler.h:77:45: note: in definition of macro ‘unlikely’
77 | # define unlikely(x) __builtin_expect(!!(x), 0)
| ^
drivers/soc/fsl/qe/qmc.c:1764:13: note: in expansion of macro ‘IS_ERR_VALUE’
1764 | if (IS_ERR_VALUE(info)) {
| ^~~~~~~~~~~~
IS_ERR_VALUE() is only meant for pointers. Fix this by checking for a
negative error value instead, which matches the documented behavior of
devm_qe_muram_alloc() aka devm_cpm_muram_alloc().
While at it, remove the unneeded print in case of a memory allocation
failure, and propagate the returned error code.
Fixes: eb680d5630 ("soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/8b113596b2c8cdda6655346232cc603efdeb935a.1727708905.git.geert+renesas@glider.be
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Commit 6eab0ce6e1 ("soc: Add SoC driver for Cirrus ep93xx") adds the
config EP93XX_SOC referring to the config EP93XX_SOC_COMMON.
Within the same patch series of the commit above, the commit 046322f1e1
("ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms") then removes the
config EP93XX_SOC_COMMON. With that the reference to this config is
obsolete.
Simplify the expression in the EP93XX_SOC config definition.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
