[ Upstream commit ded99b89d2 ]
The Android Lenovo Yoga Book X90F / X90L uses the same charger / fuelgauge
setup as the already supported Windows Lenovo Yoga Book X91F/L, add
a DMI match for this to intel_cht_wc_models with driver_data
set to INTEL_CHT_WC_LENOVO_YOGABOOK1.
When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230301095402.28582-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0484d2f80 ]
Ocelot chips (VSC7511, VSC7512, VSC7513, VSC7514) don't support bulk read
operations over SPI.
Many SPI buses have hardware that can optimize consecutive reads.
Essentially an address is written to the chip, and if the SPI controller
continues to toggle the clock, subsequent register values are reported.
This can lead to significant optimizations, because the time between
"address is written to the chip" and "chip starts to report data" can often
take a fixed amount of time.
When support for Ocelot chips were added in commit f3e893626a ("mfd:
ocelot: Add support for the vsc7512 chip via spi") it was believed that
this optimization was supported. However it is not.
Most register transactions with the Ocelot chips are not done in bulk, so
this bug could go unnoticed. The one scenario where bulk register
operations _are_ performed is when polling port statistics counters, which
was added in commit d87b1c08f3 ("net: mscc: ocelot: use bulk reads for
stats").
Things get slightly more complicated here...
A bug was introduced in commit d4c3676507 ("net: mscc: ocelot: keep
ocelot_stat_layout by reg address, not offset") that broke the optimization
of bulk reads. This means that when Ethernet support for the VSC7512 chip
was added in commit 3d7316ac81 ("net: dsa: ocelot: add external ocelot
switch control") things were actually working "as expected".
The bulk read opmtimization was discovered, and fixed in commit
6acc72a43e ("net: mscc: ocelot: fix stats region batching") and the
timing optimizations for SPI were noticed. A bulk read went from ~14ms to
~2ms. But this timing improvement came at the cost of every register
reading zero due the fact that bulk reads don't work.
The read timings increase back to 13-14ms, but that's a price worth paying
in order to receive valid data. This is verified in a DSA setup (cpsw-new
switch tied to port 0 on the VSC7512, after having been running overnight)
Rx Octets: 16222055 # Counters from CPSW switch
Tx Octets: 12034702
Net Octets: 28256757
p00_rx_octets: 12034702 # Counters from Ocelot switch
p00_rx_frames_below_65_octets: 0
p00_rx_frames_65_to_127_octets: 88188
p00_rx_frames_128_to_255_octets: 13
p00_rx_frames_256_to_511_octets: 0
p00_rx_frames_512_to_1023_octets: 0
p00_rx_frames_over_1526_octets: 3306
p00_tx_octets: 16222055
Fixes: f3e893626a ("mfd: ocelot: Add support for the vsc7512 chip via spi")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230322141130.2531256-1-colin.foster@in-advantage.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f376c47966 ]
It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:
- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID
The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be1b23696 ]
The I2C_DETECT register is at IO port 0x1a7, which is outside the range
passed to devm_ioport_map() for io_base, and was only working because
there aren't actually any bounds checks for IO port accesses.
Extending the range does not seem like a good solution here, as it would
then conflict with the IO resource assigned to the I2C controller. As
this is just a one-off access during probe, use a simple inb() instead.
While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ec32a3e40 ]
The cs5535-mfd driver uses CPU-specific data that is not available
for ARCH=um builds, so don't allow it to be built for UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
17 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
18 | (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
24 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
25 | (boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 72a9585972.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes: 72a9585972 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
In da9062_i2c_probe() regmap_clear_bits() tries to access CONFIG_J
register. As CONFIG_J is not present in da9061_aa_writeable_ranges[] probe
of da9061 fails:
da9062 2-0058: Entering I2C mode!
da9062 2-0058: Failed to set Two-Wire Bus Mode.
da9062: probe of 2-0058 failed with error -5
Add CONFIG_J register to da9061_aa_writeable_ranges[].
Fixes: 5c6f0f4563 ("mfd: da9062: Support SMBus and I2C mode")
Signed-off-by: Jens Hillenstedt <jens.hillenstedt@ise.de>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220915092004.168744-1-jens.hillenstedt@ise.de
With compile testing on non-OMAP platforms compiler might be not happy:
In function ‘twl4030_sih_setup’:
error: implicit declaration of function ‘dev_err’ [-Werror=implicit-function-declaration]
error: implicit declaration of function ‘dev_info’ [-Werror=implicit-function-declaration]
In function ‘twl4030_init_irq’:
error: invalid use of undefined type ‘struct device’
Add missed header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220923175401.8723-1-andriy.shevchenko@linux.intel.com
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
We also need to patch relevant DTS files, as the original code relied on
the fact that of_get_named_gpio_flags() would fetch any data encoded in
GPIO flags, even if it does not reflect valid flags for a GPIO.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/YxeS1BK2OBH1P/kO@google.com
The mx25_tsadc_remove() function assumes all non-zero returns are success
but the platform_get_irq() function returns negative on error and
positive non-zero values on success. It never returns zero, but if it
did then treat that as a success.
Fixes: 18f7739379 ("mfd: fsl-imx25: Clean up irq settings during removal")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/YvTfkbVQWYKMKS/t@kili
When we consider MFD which implements hotplug (e.g. USB hotplug
driver based on product and vendor IDs) functionality it turns out
that its sub-devices are correctly matched with corresponding device
tree nodes only at the first time. When physical device reboots
or is replugged (and MFD driver is disconnected and probed back
again) all sub-devices fails in mfd_add_device() with error
'Failed to locate of_node'.
The reason of that behavior is that when any MFD sub-device is
created for the first time (and matched with device tree node) it
is added to the mfd_of_node_list. It looks like this list is never
cleaned even if devices added there are intentionally removed from
the system. So when MFD device is replugged and all sub-devices
are matched with their device tree nodes again they fail as matched
nodes already exist in mfd_of_node_list. In other words current
implementation does not support MFD with hotplug feature.
This commit extends MFD core for hotplugging support by removing
appropriate OF node entry from mfd_of_node_list when corresponding
device is removed from the system. Thanks to that when device is
added once again it can be matched with its device tree node
successfully.
Signed-off-by: Michal Oleszczyk <oleszczyk.m@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220809060336.31892-1-m.oleszczyk@grinn-global.com
This adds support for the MediaTek MT6370 SubPMIC. MediaTek MT6370 is a
SubPMIC consisting of a single cell battery charger with ADC monitoring,
RGB LEDs, dual channel flashlight, WLED backlight driver, display bias
voltage supply, one general purpose LDO, and the USB Type-C & PD controller
complies with the latest USB Type-C and PD standards.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220805070610.3516-8-peterwu.pub@gmail.com
