[ Upstream commit 7b4e0b3918 ]
Grab input->mutex during suspend/resume functions like it is done in
other input drivers. This fixes the following warning during system
suspend/resume cycle on Samsung Exynos5250-based Snow Chromebook:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c
Modules linked in: ...
CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound async_run_entry_fn
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0x1a8/0x1cc
__warn from warn_slowpath_fmt+0x18c/0x1b4
warn_slowpath_fmt from input_device_enabled+0x68/0x6c
input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc
cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c
cyapa_reinitialize from cyapa_resume+0x48/0x98
cyapa_resume from dpm_run_callback+0x90/0x298
dpm_run_callback from device_resume+0xb4/0x258
device_resume from async_resume+0x20/0x64
async_resume from async_run_entry_fn+0x40/0x15c
async_run_entry_fn from process_scheduled_works+0xbc/0x6a8
process_scheduled_works from worker_thread+0x188/0x454
worker_thread from kthread+0x108/0x140
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf1625fb0 to 0xf1625ff8)
...
---[ end trace 0000000000000000 ]---
...
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c
Modules linked in: ...
CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound async_run_entry_fn
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0x1a8/0x1cc
__warn from warn_slowpath_fmt+0x18c/0x1b4
warn_slowpath_fmt from input_device_enabled+0x68/0x6c
input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc
cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c
cyapa_reinitialize from cyapa_resume+0x48/0x98
cyapa_resume from dpm_run_callback+0x90/0x298
dpm_run_callback from device_resume+0xb4/0x258
device_resume from async_resume+0x20/0x64
async_resume from async_run_entry_fn+0x40/0x15c
async_run_entry_fn from process_scheduled_works+0xbc/0x6a8
process_scheduled_works from worker_thread+0x188/0x454
worker_thread from kthread+0x108/0x140
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf1625fb0 to 0xf1625ff8)
...
---[ end trace 0000000000000000 ]---
Fixes: d69f0a43c6 ("Input: use input_device_enabled()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://lore.kernel.org/r/20231009121018.1075318-1-m.szyprowski@samsung.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 150e792dee ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230920125829.1478827-37-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: d40e9edcf3 ("Input: ioc3kbd - add device table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf32bceedd ]
clang warns about a string overflow in this driver
drivers/input/misc/ims-pcu.c:1802:2: error: 'snprintf' will always be truncated; specified size is 10, but format string expands to at least 12 [-Werror,-Wformat-truncation]
drivers/input/misc/ims-pcu.c:1814:2: error: 'snprintf' will always be truncated; specified size is 10, but format string expands to at least 12 [-Werror,-Wformat-truncation]
Make the buffer a little longer to ensure it always fits.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240326223825.4084412-7-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4255447ad3 ]
Another Fujitsu-related patch.
In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.
So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80441f76ee ]
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck.
It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad,
volume buttons, a power button, and 2 LED ring lights.
The Legion Go firmware presents these controls as a USB hub with various
devices attached. In its default state, the gamepad is presented as an
Xbox controller connected to this hub. (By holding a combination of
buttons, it can be changed to use the older DirectInput API.)
This patch teaches the existing Xbox controller module `xpad` to bind to
the controller in the Legion Go, which enables support for the:
- directional pad,
- analog sticks (including clicks),
- X, Y, A, B,
- start and select (or menu and capture),
- shoulder buttons, and
- rumble.
The trackpad, touchscreen, volume controls, and power button are already
supported via existing kernel modules. Two of the face buttons, the
gyroscopes, rear paddles, and LEDs are not.
After this patch lands, the Legion Go will be mostly functional in Linux,
out-of-the-box. The various components of the USB hub can be synthesized
into a single logical controller (including the additional buttons) in
userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which
makes the Go fully functional.
Signed-off-by: Brenton Simpson <appsforartists@google.com>
Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 180a8f12c2 ]
Some devices list 3 Gpio resources in the ACPI resource list for
the touchscreen:
1. GpioInt resource pointing to the GPIO used for the interrupt
2. GpioIo resource pointing to the reset GPIO
3. GpioIo resource pointing to the GPIO used for the interrupt
Note how the third extra GpioIo resource really is a duplicate
of the GpioInt provided info.
Ignore this extra GPIO, treating this setup the same as gpio_count == 2 &&
gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook
Colossus W803 rugged tablet and likely also on the CyberBook_T116K.
Reported-by: Maarten van der Schrieck
Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22
Suggested-by: Maarten van der Schrieck
Tested-by: Maarten van der Schrieck
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a60e6c3918 upstream.
When closing the laptop lid with an external screen connected, the mouse
pointer has a constant movement to the lower right corner. Opening the
lid again stops this movement, but after that the touchpad does no longer
register clicks.
The touchpad is connected both via i2c-hid and PS/2, the predecessor of
this device (NS70MU) has the same layout in this regard and also strange
behaviour caused by the psmouse and the i2c-hid driver fighting over
touchpad control. This fix is reusing the same workaround by just
disabling the PS/2 aux port, that is only used by the touchpad, to give the
i2c-hid driver the lone control over the touchpad.
v2: Rebased on current master
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c1f342f35f ]
Observed on dmesg of my laptop I see the following
output:
[ 19.898700] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[ 19.936057] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[ 19.936076] psmouse serio1: synaptics: Your touchpad (PNP: LEN0411 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 20.008901] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[ 20.008925] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 20.053344] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 20.397608] mousedev: PS/2 mouse device common for all mice
This patch will add its pnp id to the smbus list to
produce the setup of intertouch for the device.
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Link: https://lore.kernel.org/r/20231114063607.71772-1-jose.pekkarinen@foxhound.fi
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ea3715941a upstream.
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event
is used here. Besides this behaviour it uses the HID usage-id 0xc6
(Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but
since neither 0xc6 nor 0xc8 are currently implemented at all in
soc_button_array this not to standard behaviour is not put behind a quirk
for the moment.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5030b2fe6a ]
Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in
92e24e0e57 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.
Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 423622a90a upstream.
Add a special case for gpio_count == 1 && gpio_int_idx == 0 to
goodix_add_acpi_gpio_mappings().
It seems that on newer x86/ACPI devices the reset and irq GPIOs are no
longer listed as GPIO resources instead there is only 1 GpioInt resource
and _PS0 does the whole reset sequence for us.
This means that we must call acpi_device_fix_up_power() on these devices
to ensure that the chip is reset before we try to use it.
This part was already fixed in commit 3de93e6ed2 ("Input: goodix - call
acpi_device_fix_up_power() in some cases") by adding a call to
acpi_device_fix_up_power() to the generic "Unexpected ACPI resources"
catch all.
But it turns out that this case on some hw needs some more special
handling. Specifically the firmware may bootup with the IRQ pin in
output mode. The reset sequence from ACPI _PS0 (executed by
acpi_device_fix_up_power()) should put the pin in input mode,
but the GPIO subsystem has cached the direction at bootup, causing
request_irq() to fail due to gpiochip_lock_as_irq() failure:
[ 9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0
[ 9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060
[ 9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8
[ 9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[ 9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ
[ 9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio
[ 9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5
Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0
which adds an ACPI GPIO lookup table for the int GPIO even though we cannot
use it for reset purposes (as there is no reset GPIO).
Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call
succeed, which will explicitly set the direction to input fixing the issue.
Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since
there is only 1 GPIO in the ACPI resources the reset entry in that
lookup table will amount to a no-op.
Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f39e1c27 upstream.
In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:308A) not working at all.
Since the integrated touchpad is managed by the i2c_designware input
driver in the Linux kernel and you can't find a PS/2 mouse port on the
computer I think it's safe to not use the PS/2 mouse port at all.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2cb5cc822 upstream.
When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.
The issue was uncovered when in 92e24e0e57 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.
Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jeffery Miller <jefferymiller@google.com>
Fixes: bf232e460a ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2e00b8bf56 ]
If the device drops into ultra-low-power mode before being placed
into normal-power mode as part of ATI being triggered, the device
does not assert any interrupts until the ATI routine is restarted
two seconds later.
Solve this problem by adopting the vendor's recommendation, which
calls for the device to be placed into normal-power mode prior to
being configured and ATI being triggered.
The original implementation followed this sequence, but the order
was inadvertently changed as part of the resolution of a separate
erratum.
Fixes: 1e4189d8af ("Input: iqs7222 - protect volatile registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZKrpHc2Ji9qR25r2@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eb09074bdb upstream.
The touchpad of this device is both connected via PS/2 and i2c. This causes
strange behavior when both driver fight for control. The easy fix is to
prevent the PS/2 driver from accessing the mouse port as the full feature
set of the touchpad is only supported in the i2c interface anyway.
The strange behavior in this case is, that when an external screen is
connected and the notebook is closed, the pointer on the external screen is
moving to the lower right corner. When the notebook is opened again, this
movement stops, but the touchpad clicks are unresponsive afterwards until
reboot.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230607173331.851192-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 20a99a291d ]
Some devices have a wrong entry in their button array which points to
a GPIO which is required in another driver, so soc_button_array must
not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L,
where the PNP0C40 home button entry points to a GPIO which is not
a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which
should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L
to this new DMI quirk table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a0432bab6 upstream.
The Android Lenovo Yoga Book X90F / X90L uses the same goodix touchscreen
with 9 bytes touch reports for its touch keyboard as the already supported
Windows Lenovo Yoga Book X91F/L, add a DMI match for this to
the nine_bytes_report DMI table.
When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230315134442.71787-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 754ff5060d upstream.
The AlpsPS/2 code previously relied on the assumption that `char` is a
signed type, which was true on x86 platforms (the only place where this
driver is used) before kernel 6.2. However, on 6.2 and later, this
assumption is broken due to the introduction of -funsigned-char as a new
global compiler flag.
Fix this by explicitly specifying the signedness of `char` when sign
extending the values received from the device.
Fixes: f3f33c6776 ("Input: alps - Rushmore and v7 resolution support")
Signed-off-by: msizanoen <msizanoen@qtmlabs.xyz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230320045228.182259-1-msizanoen@qtmlabs.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbedf1a339 upstream.
A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU
and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after
boot and sometimes also after resume. However both are required for the
keyboard to not fail completely sometimes after boot or resume.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230321191619.647911-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski
Fenglin Wu
Karel Balej
Uwe Kleine-König
Arnd Bergmann
Duje Mihanović
Markuss Broks
Kunwu Chan
Vicki Pfau
Szilard Fabian
Brenton Simpson
Hans de Goede
Werner Sembach
Luca Weiss
Esther Shimanovich
José Pekkarinen
Christoffer Sandberg
Haoran Liu
Max Nguyen
Dan Carpenter
Dmitry Torokhov
Matthias Berndt
Jeffery Miller
Javier Carrasco
Jeff LaBundy
Caleb Connolly
Marek Vasut
Ismael Ferreras Morezuelas
Miaoqian Lin
Soumya Negi
Jonathan Denose
Jason A. Donenfeld
msizanoen
Matthias Benkmann