commit 5eac348182 upstream.
BRANCH_HALT_ENABLE and BRANCH_HALT_ENABLE_VOTED flags are used to check
halt status of branch clocks, which have an inverted logic for the halt
bit in CBCR register. However, the current logic in the _check_halt()
method only compares the BRANCH_HALT_ENABLE flags, ignoring the votable
branch clocks.
Update the logic to correctly handle the invert logic for votable clocks
using the BRANCH_HALT_ENABLE_VOTED flags.
Fixes: 9092d1083a ("clk: qcom: branch: Extend the invert logic for branch2 clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250128-push_fix-v1-1-fafec6747881@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0079e77c08 ]
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-mmca-fix-v1-1-5af421f58b64@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7915d7d540 ]
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Fixes: 14c735c8e3 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-2-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8995f8f108 ]
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Fixes: 25e682a02d ("clk: meson: g12a: migrate to the new parent description method")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-cpua-parent-fix-v1-1-d8c0f41865fe@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d19d7345a7 ]
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061 ("drivers/clk: convert VL struct to struct_size")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38f7fe483 ]
gxbb_32k_clk_div sets CLK_DIVIDER_ROUND_CLOSEST in the init_data flag which
is incorrect. This is field is not where the divider flags belong.
Thankfully, CLK_DIVIDER_ROUND_CLOSEST maps to bit 4 which is an unused
clock flag, so there is no unintended consequence to this error.
Effectively, the clock has been used without CLK_DIVIDER_ROUND_CLOSEST
so far, so just drop it.
Fixes: 14c735c8e3 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-1-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d4cdb196f1 upstream.
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for the clock where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 837519775f ("clk: qcom: Add display clock controller driver for SM6350")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-2-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96fe1a7ee4 upstream.
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for two clocks where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-1-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33f1722eb8 upstream.
Commit c45ae598fc ("clk: qcom: support for alpha mode configuration")
added support for configuring alpha mode, but it seems that the feature
was never working in practice.
The value of the alpha_{en,mode}_mask members of the configuration gets
added to the value parameter passed to the regmap_update_bits() function,
however the same values are not getting applied to the bitmask. As the
result, the respective bits in the USER_CTL register are never modifed
which leads to improper configuration of several PLLs.
The following table shows the PLL configurations where the 'alpha_en_mask'
member is set and which are passed as a parameter for the
clk_alpha_pll_configure() function. In the table the 'expected rate' column
shows the rate the PLL should run at with the given configuration, and
the 'real rate' column shows the rate the PLL runs at actually. The real
rates has been verified on hardwareOn IPQ* platforms, on other platforms,
those are computed values only.
file pll expected rate real rate
dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz
dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz
gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz
gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz
gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz
gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz
gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz
gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz
gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz
gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz
gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz
gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz
gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz
gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz
gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz
As it can be seen from the above, there are several PLLs which are
configured incorrectly.
Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask'
values to the bitmask in order to configure the alpha mode correctly.
Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed
in the table above. Since the 'alpha_mode_mask' is not used by any driver
currently, that part of the change causes no functional changes.
Cc: stable@vger.kernel.org
Fixes: c45ae598fc ("clk: qcom: support for alpha mode configuration")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7f12857f0 ]
In wrpll_configure_for_rate() we try to determine the best PLL
configuration for a target rate. However, in the loop where we try
values of R, we should compare the derived `vco` with `target_vco_rate`.
However, we were in fact comparing it with `target_rate`, which is
actually after Q shift. This is incorrect, and sometimes can result in
suboptimal clock rates. Fix it.
Fixes: 7b9487a9a5 ("clk: analogbits: add Wide-Range PLL library")
Signed-off-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240830061639.2316-1-ganboing@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f760a4bb5e ]
Similar to the earlier fixes meant for sm8x50 and x1e platforms,
we have to stop using the shared clk ops for sdm845 QUPs as well.
As Stephen Boyd pointed out in earlier fixes, there wasn't a problem
to mark QUP clks shared until we started parking shared RCGs at clk
registration time in commit 01a0a6cc8c ("clk: qcom: Park shared RCGs
upon registration"). Parking at init is actually harmful to the UART
when earlycon is used. If the device is pumping out data while the
frequency changes and we see garbage on the serial console until the
driver can probe and actually set a proper frequency.
This patch reverts the QUP clk sharing ops part of commit 06391eddb6
("clk: qcom: Add Global Clock controller (GCC) driver for SDM845"), so
that the QUPs on sdm845 don't get parked during clk registration and
break UART operations.
Fixes: 01a0a6cc8c ("clk: qcom: Park shared RCGs upon registration")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20241209174912.2526928-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 383ca7bee8 ]
Stop force-selecting PLL-MIPI as TCON0 parent, since it breaks video
output on Pinebook that uses RGB to eDP bridge.
Partially revert commit ca1170b699 ("clk: sunxi-ng: a64: force
select PLL_MIPI in TCON0 mux"), while still leaving
CLK_SET_RATE_NO_REPARENT flag set, since we do not want the clock to
be reparented.
The issue is that apparently different TCON0 outputs require a different
clock, or the mux might be selecting the output type.
I did an experiment: I manually configured PLL_MIPI and PLL_VIDEO0_2X
to the same clock rate and flipped the switch with devmem. Experiment
clearly showed that whenever PLL_MIPI is selected as TCON0 clock parent,
the video output stops working.
Therefore, TCON0 clock parent corresponding to the output type must be
assigned in the device tree.
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-5-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9b7c84d22 ]
The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled
first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register.
The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix
the clock tree and place the clkout1/2 under plln_sel instead of plain plln
to let the clock subsystem correctly control the bit 11 and enable the PLL
in case the CLKOUTn is supplied by PLL1/2/3.
Fixes: 43896f56b5 ("clk: imx8mp: add clkout1/2 support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28fa3291ca ]
Current implementation of of_clk_get_parent_name() leaks an OF node
reference on error path. Add a of_node_put() call before returning an
error.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 8da411cc19 ("clk: let of_clk_get_parent_name() fail for invalid clock-indices")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241210130913.3615205-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9722c3b66e ]
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: 28fa3291ca ("clk: fix an OF node reference leak in of_clk_get_parent_name()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2adbc9cea ]
Introduce a new PLL reset mode flag which controls whether or not to
reset a PLL after adjusting its rate. The mode can be configured through
platform data or device tree.
Since commit 6dc669a22c ("clk: si5351: Add PLL soft reset"), the
driver unconditionally resets a PLL whenever its rate is adjusted.
The rationale was that a PLL reset was required to get three outputs
working at the same time. Before this change, the driver never reset the
PLLs.
Commit b26ff127c5 ("clk: si5351: Apply PLL soft reset before enabling
the outputs") subsequently introduced an option to reset the PLL when
enabling a clock output that sourced it. Here, the rationale was that
this is required to get a deterministic phase relationship between
multiple output clocks.
This clearly shows that it is useful to reset the PLLs in applications
where multiple clock outputs are used. However, the Si5351 also allows
for glitch-free rate adjustment of its PLLs if one avoids resetting the
PLL. In our audio application where a single Si5351 clock output is used
to supply a runtime adjustable bit clock, this unconditional PLL reset
behaviour introduces unwanted glitches in the clock output.
It would appear that the problem being solved in the former commit
may be solved by using the optional device tree property introduced in
the latter commit, obviating the need for an unconditional PLL reset
after rate adjustment. But it's not OK to break the default behaviour of
the driver, and it cannot be assumed that all device trees are using the
property introduced in the latter commit. Hence, the new behaviour is
made opt-in.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Jacob Siverskog <jacob@teenage.engineering>
Cc: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-3-69b82311cb90@bang-olufsen.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 28fa3291ca ("clk: fix an OF node reference leak in of_clk_get_parent_name()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c64ef7e485 ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one.
In order to keep backward compatibility and make sure old DTs still work
we check if clock-names is available or not. If it is, then we can
disambiguate between really having the AXI clock or a parent clock and
so we can enable the bus clock. If not, we fallback to what was done
before and don't explicitly enable the AXI bus clock.
Note that if clock-names is given, the axi clock must be the last one in
the phandle array (also enforced in the DT bindings) so that we can reuse
as much code as possible.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-2-bc5e0733ad76@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d34db686a3 ]
Base clocks are the first in being probed and are real dependencies of the
rest of fixed, factor and peripheral clocks. For old ralink SoCs RT2880,
RT305x and RT3883 'xtal' must be defined first since in any other case,
when fixed clocks are probed they are delayed until 'xtal' is probed so the
following warning appears:
WARNING: CPU: 0 PID: 0 at drivers/clk/ralink/clk-mtmips.c:499 rt3883_bus_recalc_rate+0x98/0x138
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.43 #0
Stack : 805e58d0 00000000 00000004 8004f950 00000000 00000004 00000000 00000000
80669c54 80830000 80700000 805ae570 80670068 00000001 80669bf8 00000000
00000000 00000000 805ae570 80669b38 00000020 804db7dc 00000000 00000000
203a6d6d 80669b78 80669e48 70617773 00000000 805ae570 00000000 00000009
00000000 00000001 00000004 00000001 00000000 00000000 83fe43b0 00000000
...
Call Trace:
[<800065d0>] show_stack+0x64/0xf4
[<804bca14>] dump_stack_lvl+0x38/0x60
[<800218ac>] __warn+0x94/0xe4
[<8002195c>] warn_slowpath_fmt+0x60/0x94
[<80259ff8>] rt3883_bus_recalc_rate+0x98/0x138
[<80254530>] __clk_register+0x568/0x688
[<80254838>] of_clk_hw_register+0x18/0x2c
[<8070b910>] rt2880_clk_of_clk_init_driver+0x18c/0x594
[<8070b628>] of_clk_init+0x1c0/0x23c
[<806fc448>] plat_time_init+0x58/0x18c
[<806fdaf0>] time_init+0x10/0x6c
[<806f9bc4>] start_kernel+0x458/0x67c
---[ end trace 0000000000000000 ]---
When this driver was mainlined we could not find any active users of old
ralink SoCs so we cannot perform any real tests for them. Now, one user
of a Belkin f9k1109 version 1 device which uses RT3883 SoC appeared and
reported some issues in openWRT:
- https://github.com/openwrt/openwrt/issues/16054
Thus, define a 'rt2880_xtal_recalc_rate()' just returning the expected
frequency 40Mhz and use it along the old ralink SoCs to have a correct
boot trace with no warnings and a working clock plan from the beggining.
Fixes: 6f3b15586e ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20240910044024.120009-3-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3323915230 ]
Clock plan for Ralink SoC RT3883 needs an extra 'periph' clock to properly
set some peripherals that has this clock as their parent. When this driver
was mainlined we could not find any active users of this SoC so we cannot
perform any real tests for it. Now, one user of a Belkin f9k1109 version 1
device which uses this SoC appear and reported some issues in openWRT:
- https://github.com/openwrt/openwrt/issues/16054
The peripherals that are wrong are 'uart', 'i2c', 'i2s' and 'uartlite' which
has a not defined 'periph' clock as parent. Hence, introduce it to have a
properly working clock plan for this SoC.
Fixes: 6f3b15586e ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20240910044024.120009-2-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e81361f6cf ]
The scu clk_ops only inplements prepare() and unprepare() callback.
Saving the clock state during suspend by checking clk_hw_is_enabled()
is not safe as it's possible that some device drivers may only
disable the clocks without unprepare. Then the state retention will not
work for such clocks.
Fixing it by checking clk_hw_is_prepared() which is more reasonable
and safe.
Fixes: d0409631f4 ("clk: imx: scu: add suspend/resume support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-4-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff4279618f ]
To i.MX93 which features dual Cortex-A55 cores and DSU, when using
writel_relaxed to write value to PLL registers, the value might be
buffered. To make sure the value has been written into the hardware,
using readl to read back the register could achieve the goal.
current PLL power up flow can be simplified as below:
1. writel_relaxed to set the PLL POWERUP bit;
2. readl_poll_timeout to check the PLL lock bit:
a). timeout = ktime_add_us(ktime_get(), timeout_us);
b). readl the pll the lock reg;
c). check if the pll lock bit ready
d). check if timeout
But in some corner cases, both the write in step 1 and read in
step 2 will be blocked by other bus transaction in the SoC for a
long time, saying the value into real hardware is just before step b).
That means the timeout counting has begins for quite sometime since
step a), but value still not written into real hardware until bus
released just at a point before step b).
Then there maybe chances that the pll lock bit is not ready
when readl done but the timeout happens. readl_poll_timeout will
err return due to timeout. To avoid such unexpected failure,
read back the reg to make sure the write has been done in HW
reg.
So use readl after writel_relaxed to fix the issue.
Since we are here, to avoid udelay to run before writel_relaxed, use
readl before udelay.
Fixes: 1b26cb8a77 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-3-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
