[ Upstream commit 2b938e3db3 ]
Definitions of ioread64 and iowrite64 macros in asm/io.h called by vfio
pci implementations are enclosed inside check for CONFIG_GENERIC_IOMAP.
They don't get defined if CONFIG_GENERIC_IOMAP is defined. Include
linux/io-64-nonatomic-lo-hi.h to define iowrite64 and ioread64 macros
when they are not defined. io-64-nonatomic-lo-hi.h maps the macros to
generic implementation in lib/iomap.c. The generic implementation does
64 bit rw if readq/writeq is defined for the architecture, otherwise it
would do 32 bit back to back rw.
Note that there are two versions of the generic implementation that
differs in the order the 32 bit words are written if 64 bit support is
not present. This is not the little/big endian ordering, which is
handled separately. This patch uses the lo followed by hi word ordering
which is consistent with current back to back implementation in the
vfio/pci code.
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241210131938.303500-2-ramesh.thomas@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c7c5430bc ]
Align the page tracking maximum message size with the device's
capability instead of relying on PAGE_SIZE.
This adjustment resolves a mismatch on systems where PAGE_SIZE is 64K,
but the firmware only supports a maximum message size of 4K.
Now that we rely on the device's capability for max_message_size, we
must account for potential future increases in its value.
Key considerations include:
- Supporting message sizes that exceed a single system page (e.g., an 8K
message on a 4K system).
- Ensuring the RQ size is adjusted to accommodate at least 4
WQEs/messages, in line with the device specification.
The above has been addressed as part of the patch.
Fixes: 79c3cf2799 ("vfio/mlx5: Init QP based resources for dirty tracking")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Yingshun Cui <yicui@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20241205122654.235619-1-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe4bf8d0b6 ]
There are cases where a PCIe extended capability should be hidden from
the user. For example, an unknown capability (i.e., capability with ID
greater than PCI_EXT_CAP_ID_MAX) or a capability that is intentionally
chosen to be hidden from the user.
Hiding a capability is done by virtualizing and modifying the 'Next
Capability Offset' field of the previous capability so it points to the
capability after the one that should be hidden.
The special case where the first capability in the list should be hidden
is handled differently because there is no previous capability that can
be modified. In this case, the capability ID and version are zeroed
while leaving the next pointer intact. This hides the capability and
leaves an anchor for the rest of the capability list.
However, today, hiding the first capability in the list is not done
properly if the capability is unknown, as struct
vfio_pci_core_device->pci_config_map is set to the capability ID during
initialization but the capability ID is not properly checked later when
used in vfio_config_do_rw(). This leads to the following warning [1] and
to an out-of-bounds access to ecap_perms array.
Fix it by checking cap_id in vfio_config_do_rw(), and if it is greater
than PCI_EXT_CAP_ID_MAX, use an alternative struct perm_bits for direct
read only access instead of the ecap_perms array.
Note that this is safe since the above is the only case where cap_id can
exceed PCI_EXT_CAP_ID_MAX (except for the special capabilities, which
are already checked before).
[1]
WARNING: CPU: 118 PID: 5329 at drivers/vfio/pci/vfio_pci_config.c:1900 vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
CPU: 118 UID: 0 PID: 5329 Comm: simx-qemu-syste Not tainted 6.12.0+ #1
(snip)
Call Trace:
<TASK>
? show_regs+0x69/0x80
? __warn+0x8d/0x140
? vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
? report_bug+0x18f/0x1a0
? handle_bug+0x63/0xa0
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
? vfio_pci_config_rw+0x244/0x430 [vfio_pci_core]
vfio_pci_rw+0x101/0x1b0 [vfio_pci_core]
vfio_pci_core_read+0x1d/0x30 [vfio_pci_core]
vfio_device_fops_read+0x27/0x40 [vfio]
vfs_read+0xbd/0x340
? vfio_device_fops_unl_ioctl+0xbb/0x740 [vfio]
? __rseq_handle_notify_resume+0xa4/0x4b0
__x64_sys_pread64+0x96/0xc0
x64_sys_call+0x1c3d/0x20d0
do_syscall_64+0x4d/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 89e1f7d4c6 ("vfio: Add PCI device driver")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241124142739.21698-1-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ba2fdff2e ]
The PAPR expects the TCE table to have no entries at the time of
unset window(i.e. remove-pe). The TCE clear right now is done
before freeing the iommu table. On pSeries, the unset window
makes those entries inaccessible to the OS and the H_PUT/GET calls
fail on them with H_CONSTRAINED.
On PowerNV, this has no side effect as the TCE clear can be done
before the DMA window removal as well.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/171923273535.1397.1236742071894414895.stgit@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 95feb3160e upstream.
Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign
these devices to virtual machines. Add the PCI IDs of these devices to the VFIO
denylist to ensure that this is handled appropriately by the VFIO subsystem.
The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids
(and related) family of products that perform data movement and compression.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 457f730825 ]
It's possible the migration file is accessed after reset when it has
been cleaned up, especially when it's initiated by the device. This is
because the driver doesn't rip out the filep when cleaning up it only
frees the related page structures and sets its local struct
pds_vfio_lm_file pointer to NULL. This can cause a NULL pointer
dereference, which is shown in the example below during a restore after
a device initiated reset:
BUG: kernel NULL pointer dereference, address: 000000000000000c
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:pds_vfio_get_file_page+0x5d/0xf0 [pds_vfio_pci]
[...]
Call Trace:
<TASK>
pds_vfio_restore_write+0xf6/0x160 [pds_vfio_pci]
vfs_write+0xc9/0x3f0
? __fget_light+0xc9/0x110
ksys_write+0xb5/0xf0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
Add a disabled flag to the driver's struct pds_vfio_lm_file that gets
set during cleanup. Then make sure to check the flag when the migration
file is accessed via its file_operations. By default this flag will be
false as the memory for struct pds_vfio_lm_file is kzalloc'd, which means
the struct pds_vfio_lm_file is enabled and accessible. Also, since the
file_operations and driver's migration file cleanup happen under the
protection of the same pds_vfio_lm_file.lock, using this flag is thread
safe.
Fixes: 8512ed2563 ("vfio/pds: Always clear the save/restore FDs on reset")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20240308182149.22036-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7447d911af upstream.
The eventfd_ctx trigger pointer of the vfio_fsl_mc_irq object is
initially NULL and may become NULL if the user sets the trigger
eventfd to -1. The interrupt handler itself is guaranteed that
trigger is always valid between request_irq() and free_irq(), but
the loopback testing mechanisms to invoke the handler function
need to test the trigger. The triggering and setting ioctl paths
both make use of igate and are therefore mutually exclusive.
The vfio-fsl-mc driver does not make use of irqfds, nor does it
support any sort of masking operations, therefore unlike vfio-pci
and vfio-platform, the flow can remain essentially unchanged.
Cc: Diana Craciun <diana.craciun@oss.nxp.com>
Cc: <stable@vger.kernel.org>
Fixes: cc0ee20bd9 ("vfio/fsl-mc: trigger an interrupt via eventfd")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240308230557.805580-8-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 675daf435e upstream.
The vfio-platform SET_IRQS ioctl currently allows loopback triggering of
an interrupt before a signaling eventfd has been configured by the user,
which thereby allows a NULL pointer dereference.
Rather than register the IRQ relative to a valid trigger, register all
IRQs in a disabled state in the device open path. This allows mask
operations on the IRQ to nest within the overall enable state governed
by a valid eventfd signal. This decouples @masked, protected by the
@locked spinlock from @trigger, protected via the @igate mutex.
In doing so, it's guaranteed that changes to @trigger cannot race the
IRQ handlers because the IRQ handler is synchronously disabled before
modifying the trigger, and loopback triggering of the IRQ via ioctl is
safe due to serialization with trigger changes via igate.
For compatibility, request_irq() failures are maintained to be local to
the SET_IRQS ioctl rather than a fatal error in the open device path.
This allows, for example, a userspace driver with polling mode support
to continue to work regardless of moving the request_irq() call site.
This necessarily blocks all SET_IRQS access to the failed index.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 57f972e2b3 ("vfio/platform: trigger an interrupt via eventfd")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240308230557.805580-7-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18c198c96a upstream.
A vulnerability exists where the eventfd for INTx signaling can be
deconfigured, which unregisters the IRQ handler but still allows
eventfds to be signaled with a NULL context through the SET_IRQS ioctl
or through unmask irqfd if the device interrupt is pending.
Ideally this could be solved with some additional locking; the igate
mutex serializes the ioctl and config space accesses, and the interrupt
handler is unregistered relative to the trigger, but the irqfd path
runs asynchronous to those. The igate mutex cannot be acquired from the
atomic context of the eventfd wake function. Disabling the irqfd
relative to the eventfd registration is potentially incompatible with
existing userspace.
As a result, the solution implemented here moves configuration of the
INTx interrupt handler to track the lifetime of the INTx context object
and irq_type configuration, rather than registration of a particular
trigger eventfd. Synchronization is added between the ioctl path and
eventfd_signal() wrapper such that the eventfd trigger can be
dynamically updated relative to in-flight interrupts or irqfd callbacks.
Cc: <stable@vger.kernel.org>
Fixes: 89e1f7d4c6 ("vfio: Add PCI device driver")
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240308230557.805580-5-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b620ecbd17 upstream.
In order to synchronize changes that can affect the thread callback,
introduce an interface to force a flush of the inject workqueue. The
irqfd pointer is only valid under spinlock, but the workqueue cannot
be flushed under spinlock. Therefore the flush work for the irqfd is
queued under spinlock. The vfio_irqfd_cleanup_wq workqueue is re-used
for queuing this work such that flushing the workqueue is also ordered
relative to shutdown.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240308230557.805580-4-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Stable-dep-of: 18c198c96a ("vfio/pci: Create persistent INTx handler")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 810cd4bb53 ]
Mask operations through config space changes to DisINTx may race INTx
configuration changes via ioctl. Create wrappers that add locking for
paths outside of the core interrupt code.
In particular, irq_type is updated holding igate, therefore testing
is_intx() requires holding igate. For example clearing DisINTx from
config space can otherwise race changes of the interrupt configuration.
This aligns interfaces which may trigger the INTx eventfd into two
camps, one side serialized by igate and the other only enabled while
INTx is configured. A subsequent patch introduces synchronization for
the latter flows.
Cc: <stable@vger.kernel.org>
Fixes: 89e1f7d4c6 ("vfio: Add PCI device driver")
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240308230557.805580-3-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe9a708268 ]
Currently for devices requiring masking at the irqchip for INTx, ie.
devices without DisINTx support, the IRQ is enabled in request_irq()
and subsequently disabled as necessary to align with the masked status
flag. This presents a window where the interrupt could fire between
these events, resulting in the IRQ incrementing the disable depth twice.
This would be unrecoverable for a user since the masked flag prevents
nested enables through vfio.
Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx
is never auto-enabled, then unmask as required.
Cc: <stable@vger.kernel.org>
Fixes: 89e1f7d4c6 ("vfio: Add PCI device driver")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240308230557.805580-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d18411ec30 ]
iova_bitmap_mapped_length() don't deal correctly with the small bitmaps
(< 2M bitmaps) when the starting address isn't u64 aligned, leading to
skipping a tiny part of the IOVA range. This is materialized as not
marking data dirty that should otherwise have been.
Fix that by using a u8 * in the internal state of IOVA bitmap. Most of the
data structures use the type of the bitmap to adjust its indexes, thus
changing the type of the bitmap decreases the granularity of the bitmap
indexes.
Fixes: b058ea3ab5 ("vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries")
Link: https://lore.kernel.org/r/20240202133415.23819-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4ab7dedae ]
Dirty IOMMU hugepages reported on a base page page-size granularity can
lead to an attempt to set dirty pages in the bitmap beyond the limits that
are pinned.
Bounds check the page index of the array we are trying to access is within
the limits before we kmap() and return otherwise.
While it is also a defensive check, this is also in preparation to defer
setting bits (outside the mapped range) to the next iteration(s) when the
pages become available.
Fixes: b058ea3ab5 ("vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries")
Link: https://lore.kernel.org/r/20240202133415.23819-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be12ad45e1 ]
When the optional PRE_COPY support was added to speed up the device
compatibility check, it failed to update the saving/resuming data
pointers based on the fd offset. This results in migration data
corruption and when the device gets started on the destination the
following error is reported in some cases,
[ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
[ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010
[ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f
[ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
[ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
[ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found
[ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found
[ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2
Fixes: d9a871e4a1 ("hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231120091406.780-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4004497cec ]
The incorrect check is being done for comparing the
iova/length being requested to sync. This can cause
the dirty sync operation to fail. Fix this by making
sure the iova offset added to the requested sync
length doesn't exceed the region_size.
Also, the region_start is assumed to always be at 0.
This can cause dirty tracking to fail because the
device/driver bitmap offset always starts at 0,
however, the region_start/iova may not. Fix this by
determining the iova offset from region_start to
determine the bitmap offset.
Fixes: f232836a91 ("vfio/pds: Add support for dirty page tracking")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231117001207.2793-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae2667cd8a ]
The driver could possibly sleep while in atomic context resulting
in the following call trace while CONFIG_DEBUG_ATOMIC_SLEEP=y is
set:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2817, name: bash
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
__might_resched+0x123/0x170
mutex_lock+0x1e/0x50
pds_vfio_put_lm_file+0x1e/0xa0 [pds_vfio_pci]
pds_vfio_put_save_file+0x19/0x30 [pds_vfio_pci]
pds_vfio_state_mutex_unlock+0x2e/0x80 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
This can happen if pds_vfio_put_restore_file() and/or
pds_vfio_put_save_file() grab the mutex_lock(&lm_file->lock)
while the spin_lock(&pds_vfio->reset_lock) is held, which can
happen during while calling pds_vfio_state_mutex_unlock().
Fix this by changing the reset_lock to reset_mutex so there are no such
conerns. Also, make sure to destroy the reset_mutex in the driver specific
VFIO device release function.
This also fixes a spinlock bad magic BUG that was caused
by not calling spinlock_init() on the reset_lock. Since, the lock is
being changed to a mutex, make sure to call mutex_init() on it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/kvm/1f9bc27b-3de9-4891-9687-ba2820c1b390@moroto.mountain/
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231122192532.25791-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91aeb563bd ]
The following BUG was found when running on a kernel with
CONFIG_DEBUG_MUTEXES=y set:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
RIP: 0010:mutex_trylock+0x10d/0x120
Call Trace:
<TASK>
? __warn+0x85/0x140
? mutex_trylock+0x10d/0x120
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? mutex_trylock+0x10d/0x120
? mutex_trylock+0x10d/0x120
pds_vfio_reset+0x3a/0x60 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
As shown, lock->magic != lock. This is because
mutex_init(&pds_vfio->state_mutex) is called in the VFIO open path. So,
if a reset is initiated before the VFIO device is opened the mutex will
have never been initialized. Fix this by calling
mutex_init(&pds_vfio->state_mutex) in the VFIO init path.
Also, don't destroy the mutex on close because the device may
be re-opened, which would cause mutex to be uninitialized. Fix this by
implementing a driver specific vfio_device_ops.release callback that
destroys the mutex before calling vfio_pci_core_release_dev().
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231122192532.25791-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
If PCI_ATS isn't set, then pdev->physfn is not defined.
it causes a compilation issue:
../drivers/vfio/pci/pds/vfio_dev.c:165:30: error: ‘struct pci_dev’ has no member named ‘physfn’; did you mean ‘is_physfn’?
165 | __func__, pci_dev_id(pdev->physfn), pci_id, vf_id,
| ^~~~~~
So adding PCI_IOV depends to select PCI_ATS.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230906014942.1658769-1-oushixiong@kylinos.cn
Fixes: 63f77a7161 ("vfio/pds: register with the pds_core PF")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pull iommufd updates from Jason Gunthorpe:
"On top of the vfio updates is built some new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that
hold the translation mapping. This is the basic functionality for
the normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors
when emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
that owns a VFIO device. This includes support for the Intel iommu,
and patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kernel APIs: iommufd_ctx_has_group(),
iommufd_device_to_ictx(), iommufd_device_to_id(),
iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some
per-group data
- Reorganize how the internal hwpt allocation flows to have more
robust locking
- Improve the access interfaces to support detach and replace of an
IOAS from an access
- New selftests and a rework of how the selftests creates a mock
iommu driver to be more like a real iommu driver"
Link: https://lore.kernel.org/lkml/ZO%2FTe6LU1ENf58ZW@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
iommufd/selftest: Don't leak the platform device memory when unloading the module
iommu/vt-d: Implement hw_info for iommu capability query
iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
iommufd: Add IOMMU_GET_HW_INFO
iommu: Add new iommu op to get iommu hardware information
iommu: Move dev_iommu_ops() to private header
iommufd: Remove iommufd_ref_to_users()
iommufd/selftest: Make the mock iommu driver into a real driver
vfio: Support IO page table replacement
iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
iommufd: Add iommufd_access_replace() API
iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
iommufd: Add iommufd_access_change_ioas(_id) helpers
iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
iommufd/selftest: Return the real idev id from selftest mock_domain
iommufd: Add IOMMU_HWPT_ALLOC
iommufd/selftest: Test iommufd_device_replace()
iommufd: Make destroy_rwsem use a lock class per object type
...
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
Commit bb500dbe2a ("vfio/pds: Add VFIO live migration support")
added live migration support for the pds-vfio-pci driver. When
sending the SUSPEND command to the device, the driver sets the
type of suspend (i.e. P2P or FULL). However, the driver isn't
sending the type of suspend for the SUSPEND_STATUS command, which
will result in failures. Fix this by also sending the suspend type
in the SUSPEND_STATUS command.
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821184215.34564-1-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The VFIO_DEVICE_GET_INFO, VFIO_DEVICE_GET_REGION_INFO, and
VFIO_IOMMU_GET_INFO ioctls fill in an info struct followed by capability
structs:
+------+---------+---------+-----+
| info | caps[0] | caps[1] | ... |
+------+---------+---------+-----+
Both the info and capability struct sizes are not always multiples of
sizeof(u64), leaving u64 fields in later capability structs misaligned.
Userspace applications currently need to handle misalignment manually in
order to support CPU architectures and programming languages with strict
alignment requirements.
Make life easier for userspace by ensuring alignment in the kernel. This
is done by padding info struct definitions and by copying out zeroes
after capability structs that are not aligned.
The new layout is as follows:
+------+---------+---+---------+-----+
| info | caps[0] | 0 | caps[1] | ... |
+------+---------+---+---------+-----+
In this example caps[0] has a size that is not multiples of sizeof(u64),
so zero padding is added to align the subsequent structure.
Adding zero padding between structs does not break the uapi. The memory
layout is specified by the info.cap_offset and caps[i].next fields
filled in by the kernel. Applications use these field values to locate
structs and are therefore unaffected by the addition of zero padding.
Note that code that copies out info structs with padding is updated to
always zero the struct and copy out as many bytes as userspace
requested. This makes the code shorter and avoids potential information
leaks by ensuring padding is initialized.
Originally-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230809203144.2880050-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.
The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:
struct vfio_iommu_type1_info_cap_migration {
struct vfio_info_cap_header header; /* 0 8 */
__u32 flags; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u64 pgsize_bitmap; /* 16 8 */
__u64 max_dirty_bitmap_size; /* 24 8 */
/* size: 32, cachelines: 1, members: 4 */
/* sum members: 28, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
};
The cap_mig variable is filled in without initializing the hole:
static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
struct vfio_info_cap *caps)
{
struct vfio_iommu_type1_info_cap_migration cap_mig;
cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
cap_mig.header.version = 1;
cap_mig.flags = 0;
/* support minimum pgsize */
cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;
return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
}
The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:
int vfio_info_add_capability(struct vfio_info_cap *caps,
struct vfio_info_cap_header *cap, size_t size)
{
struct vfio_info_cap_header *header;
header = vfio_info_cap_add(caps, size, cap->id, cap->version);
if (IS_ERR(header))
return PTR_ERR(header);
memcpy(header + 1, cap + 1, size - sizeof(*header));
return 0;
}
This issue was found by code inspection.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fixes: ad721705d0 ("vfio iommu: Add migration capability to report supported features")
Link: https://lore.kernel.org/r/20230801155352.1391945-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It's possible that the device firmware crashes and is able to recover
due to some configuration and/or other issue. If a live migration
is in progress while the firmware crashes, the live migration will
fail. However, the VF PCI device should still be functional post
crash recovery and subsequent migrations should go through as
expected.
When the pds_core device notices that firmware crashes it sends an
event to all its client drivers. When the pds_vfio driver receives
this event while migration is in progress it will request a deferred
reset on the next migration state transition. This state transition
will report failure as well as any subsequent state transition
requests from the VMM/VFIO. Based on uapi/vfio.h the only way out of
VFIO_DEVICE_STATE_ERROR is by issuing VFIO_DEVICE_RESET. Once this
reset is done, the migration state will be reset to
VFIO_DEVICE_STATE_RUNNING and migration can be performed.
If the event is received while no migration is in progress (i.e.
the VM is in normal operating mode), then no actions are taken
and the migration state remains VFIO_DEVICE_STATE_RUNNING.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-8-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_and_clear.
All of the tracker resources are allocated and dirty tracking on the
device is started during log_start. The resources are cleaned up and
dirty tracking on the device is stopped during log_stop. The dirty
pages are determined and reported during log_read_and_clear.
In order to support these callbacks admin queue commands are used.
All of the adminq queue command structures and implementations
are included as part of this patch.
PDS_LM_CMD_DIRTY_STATUS is added to query the current status of
dirty tracking on the device. This includes if it's enabled (i.e.
number of regions being tracked from the device's perspective) and
the maximum number of regions supported from the device's perspective.
PDS_LM_CMD_DIRTY_ENABLE is added to enable dirty tracking on the
specified number of regions and their iova ranges.
PDS_LM_CMD_DIRTY_DISABLE is added to disable dirty tracking for all
regions on the device.
PDS_LM_CMD_READ_SEQ and PDS_LM_CMD_DIRTY_WRITE_ACK are added to
support reading and acknowledging the currently dirtied pages.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-7-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's adminq for device configuration.
The ability to suspend, resume, and transfer VF device state data is
included along with the required admin queue command structures and
implementations.
PDS_LM_CMD_SUSPEND and PDS_LM_CMD_SUSPEND_STATUS are added to support
the VF device suspend operation.
PDS_LM_CMD_RESUME is added to support the VF device resume operation.
PDS_LM_CMD_STATE_SIZE is added to determine the exact size of the VF
device state data.
PDS_LM_CMD_SAVE is added to get the VF device state data.
PDS_LM_CMD_RESTORE is added to restore the VF device with the
previously saved data from PDS_LM_CMD_SAVE.
PDS_LM_CMD_HOST_VF_STATUS is added to notify the DSC/firmware when
a migration is in/not-in progress from the host's perspective. The
DSC/firmware can use this to clear/setup any necessary state related
to a migration.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-6-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This commit enables the dynamic allocation of EQs at runtime, allowing
for more flexibility in managing completion EQs and reducing the memory
overhead of driver load. Whenever a CQ is created for a given vector
index, the driver will lookup to see if there is an already mapped
completion EQ for that vector, if so, utilize it. Otherwise, allocate a
new EQ on demand and then utilize it for the CQ completion events.
Add a protection lock to the EQ table to protect from concurrent EQ
creation attempts.
While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with
mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an
EQ on demand if no EQ is found for the given vector.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To accurately represent its purpose, rename the function that retrieves
the value of maximum vectors from mlx5_comp_vectors_count() to
mlx5_comp_vectors_max().
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
