[ Upstream commit 8930424777 ]
Because skb_tunnel_check_pmtu() doesn't handle PACKET_HOST packets,
commit 30a92c9e3d ("openvswitch: Set the skbuff pkt_type for proper
pmtud support.") forced skb->pkt_type to PACKET_OUTGOING for
openvswitch packets that are sent using the OVS_ACTION_ATTR_OUTPUT
action. This allowed such packets to invoke the
iptunnel_pmtud_check_icmp() or iptunnel_pmtud_check_icmpv6() helpers
and thus trigger PMTU update on the input device.
However, this also broke other parts of PMTU discovery. Since these
packets don't have the PACKET_HOST type anymore, they won't trigger the
sending of ICMP Fragmentation Needed or Packet Too Big messages to
remote hosts when oversized (see the skb_in->pkt_type condition in
__icmp_send() for example).
These two skb->pkt_type checks are therefore incompatible as one
requires skb->pkt_type to be PACKET_HOST, while the other requires it
to be anything but PACKET_HOST.
It makes sense to not trigger ICMP messages for non-PACKET_HOST packets
as these messages should be generated only for incoming l2-unicast
packets. However there doesn't seem to be any reason for
skb_tunnel_check_pmtu() to ignore PACKET_HOST packets.
Allow both cases to work by allowing skb_tunnel_check_pmtu() to work on
PACKET_HOST packets and not overriding skb->pkt_type in openvswitch
anymore.
Fixes: 30a92c9e3d ("openvswitch: Set the skbuff pkt_type for proper pmtud support.")
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/eac941652b86fddf8909df9b3bf0d97bc9444793.1743208264.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df207de9d9 ]
Matt Dowling reported a weird UDP memory usage issue.
Under normal operation, the UDP memory usage reported in /proc/net/sockstat
remains close to zero. However, it occasionally spiked to 524,288 pages
and never dropped. Moreover, the value doubled when the application was
terminated. Finally, it caused intermittent packet drops.
We can reproduce the issue with the script below [0]:
1. /proc/net/sockstat reports 0 pages
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 0
2. Run the script till the report reaches 524,288
# python3 test.py & sleep 5
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> PAGE_SHIFT
3. Kill the socket and confirm the number never drops
# pkill python3 && sleep 5
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 524288
4. (necessary since v6.0) Trigger proto_memory_pcpu_drain()
# python3 test.py & sleep 1 && pkill python3
5. The number doubles
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 1048577
The application set INT_MAX to SO_RCVBUF, which triggered an integer
overflow in udp_rmem_release().
When a socket is close()d, udp_destruct_common() purges its receive
queue and sums up skb->truesize in the queue. This total is calculated
and stored in a local unsigned integer variable.
The total size is then passed to udp_rmem_release() to adjust memory
accounting. However, because the function takes a signed integer
argument, the total size can wrap around, causing an overflow.
Then, the released amount is calculated as follows:
1) Add size to sk->sk_forward_alloc.
2) Round down sk->sk_forward_alloc to the nearest lower multiple of
PAGE_SIZE and assign it to amount.
3) Subtract amount from sk->sk_forward_alloc.
4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated().
When the issue occurred, the total in udp_destruct_common() was 2147484480
(INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release().
At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and
2) sets -2147479552 to amount. 3) reverts the wraparound, so we don't
see a warning in inet_sock_destruct(). However, udp_memory_allocated
ends up doubling at 4).
Since commit 3cd3399dd7 ("net: implement per-cpu reserves for
memory_allocated"), memory usage no longer doubles immediately after
a socket is close()d because __sk_mem_reduce_allocated() caches the
amount in udp_memory_per_cpu_fw_alloc. However, the next time a UDP
socket receives a packet, the subtraction takes effect, causing UDP
memory usage to double.
This issue makes further memory allocation fail once the socket's
sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet
drops.
To prevent this issue, let's use unsigned int for the calculation and
call sk_forward_alloc_add() only once for the small delta.
Note that first_packet_length() also potentially has the same problem.
[0]:
from socket import *
SO_RCVBUFFORCE = 33
INT_MAX = (2 ** 31) - 1
s = socket(AF_INET, SOCK_DGRAM)
s.bind(('', 0))
s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX)
c = socket(AF_INET, SOCK_DGRAM)
c.connect(s.getsockname())
data = b'a' * 100
while True:
c.send(data)
Fixes: f970bd9e3a ("udp: implement memory accounting helpers")
Reported-by: Matt Dowling <madowlin@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250401184501.67377-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bac76cf898 upstream.
We have some problem closing zero-window fin-wait-1 tcp sockets in our
environment. This patch come from the investigation.
Previously tcp_abort only sends out reset and calls tcp_done when the
socket is not SOCK_DEAD, aka orphan. For orphan socket, it will only
purging the write queue, but not close the socket and left it to the
timer.
While purging the write queue, tp->packets_out and sk->sk_write_queue
is cleared along the way. However tcp_retransmit_timer have early
return based on !tp->packets_out and tcp_probe_timer have early
return based on !sk->sk_write_queue.
This caused ICSK_TIME_RETRANS and ICSK_TIME_PROBE0 not being resched
and socket not being killed by the timers, converting a zero-windowed
orphan into a forever orphan.
This patch removes the SOCK_DEAD check in tcp_abort, making it send
reset to peer and close the socket accordingly. Preventing the
timer-less orphan from happening.
According to Lorenzo's email in the v1 thread, the check was there to
prevent force-closing the same socket twice. That situation is handled
by testing for TCP_CLOSE inside lock, and returning -ENOENT if it is
already closed.
The -ENOENT code comes from the associate patch Lorenzo made for
iproute2-ss; link attached below, which also conform to RFC 9293.
At the end of the patch, tcp_write_queue_purge(sk) is removed because it
was already called in tcp_done_with_error().
p.s. This is the same patch with v2. Resent due to mis-labeled "changes
requested" on patchwork.kernel.org.
Link: https://patchwork.ozlabs.org/project/netdev/patch/1450773094-7978-3-git-send-email-lorenzo@google.com/
Fixes: c1e64e298b ("net: diag: Support destroying TCP sockets.")
Signed-off-by: Xueming Feng <kuro@kuroa.me>
Tested-by: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240826102327.1461482-1-kuro@kuroa.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/lkml/Z9OZS%2Fhc+v5og6%2FU@perf/
[youngmin: Resolved minor conflict in net/ipv4/tcp.c]
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3c9231ea64 ]
When I read through the TSO codes, I found out that we probably
miss initializing the tx_flags of last seg when TSO is turned
off, which means at the following points no more timestamp
(for this last one) will be generated. There are three flags
to be handled in this patch:
1. SKBTX_HW_TSTAMP
2. SKBTX_BPF
3. SKBTX_SCHED_TSTAMP
Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit
6b98ec7e88 ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback")
and only belongs to net-next branch material for now. The common
issue of the above three flags can be fixed by this single patch.
This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what
the UDP GSO does to make the newly segmented last skb inherit the
tx_flags so that requested timestamp will be generated in each
certain layer, or else that last one has zero value of tx_flags
which leads to no timestamp at all.
Fixes: 4ed2d765df ("net-timestamp: TCP timestamping")
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee01b2f2d7 ]
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment.
Fixes: ad405857b1 ("udp: better wmem accounting on gso")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250226171352.258045-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d52da23b6 ]
Recently a bug was discovered where the server had entered TCP_ESTABLISHED
state, but the upper layers were not notified.
The same 5-tuple packet may be processed by different CPUSs, so two
CPUs may receive different ack packets at the same time when the
state is TCP_NEW_SYN_RECV.
In that case, req->ts_recent in tcp_check_req may be changed concurrently,
which will probably cause the newsk's ts_recent to be incorrectly large.
So that tcp_validate_incoming will fail. At this point, newsk will not be
able to enter the TCP_ESTABLISHED.
cpu1 cpu2
tcp_check_req
tcp_check_req
req->ts_recent = rcv_tsval = t1
req->ts_recent = rcv_tsval = t2
syn_recv_sock
tcp_sk(child)->rx_opt.ts_recent = req->ts_recent = t2 // t1 < t2
tcp_child_process
tcp_rcv_state_process
tcp_validate_incoming
tcp_paws_check
if ((s32)(rx_opt->ts_recent - rx_opt->rcv_tsval) <= paws_win)
// t2 - t1 > paws_win, failed
tcp_v4_do_rcv
tcp_rcv_state_process
// TCP_ESTABLISHED
The cpu2's skb or a newly received skb will call tcp_v4_do_rcv to get
the newsk into the TCP_ESTABLISHED state, but at this point it is no
longer possible to notify the upper layer application. A notification
mechanism could be added here, but the fix is more complex, so the
current fix is used.
In tcp_check_req, req->ts_recent is used to assign a value to
tcp_sk(child)->rx_opt.ts_recent, so removing the change in req->ts_recent
and changing tcp_sk(child)->rx_opt.ts_recent directly after owning the
req fixes this bug.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e863e5db6 ]
Pass a dscp_t variable to ip_route_input(), instead of a plain u8, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input() to consider are:
* input_action_end_dx4_finish() and input_action_end_dt4() in
net/ipv6/seg6_local.c. These functions set the tos parameter to 0,
which is already a valid dscp_t value, so they don't need to be
adjusted for the new prototype.
* icmp_route_lookup(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* br_nf_pre_routing_finish(), ip_options_rcv_srr() and ip4ip6_err(),
which get the DSCP directly from IPv4 headers. Define a helper to
read the .tos field of struct iphdr as dscp_t, so that these
function don't have to do the conversion manually.
While there, declare *iph as const in br_nf_pre_routing_finish(),
declare its local variables in reverse-christmas-tree order and move
the "err = ip_route_input()" assignment out of the conditional to avoid
checkpatch warning.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/e9d40781d64d3d69f4c79ac8a008b8d67a033e8d.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 27843ce6ba ("ipvlan: ensure network headers are in skb linear part")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4805646c42 ]
The function is called to resolve a route for an ICMP message that is
sent in response to a situation. Based on the type of the generated ICMP
message, the function is either passed the DS field of the packet that
generated the ICMP message or a DS field that is derived from it.
Unmask the upper DSCP bits before resolving and output route via
ip_route_output_key_hash() so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 27843ce6ba ("ipvlan: ensure network headers are in skb linear part")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c6f50b37f ]
Align the ICMP code to other callers of ip_route_input() and pass the
full DS field. In the future this will allow us to perform a route
lookup according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-11-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 27843ce6ba ("ipvlan: ensure network headers are in skb linear part")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db3efdcf70 ]
Introduce a tracepoint for icmp_send, which can help users to get more
detail information conveniently when icmp abnormal events happen.
1. Giving an usecase example:
=============================
When an application experiences packet loss due to an unreachable UDP
destination port, the kernel will send an exception message through the
icmp_send function. By adding a trace point for icmp_send, developers or
system administrators can obtain detailed information about the UDP
packet loss, including the type, code, source address, destination address,
source port, and destination port. This facilitates the trouble-shooting
of UDP packet loss issues especially for those network-service
applications.
2. Operation Instructions:
==========================
Switch to the tracing directory.
cd /sys/kernel/tracing
Filter for destination port unreachable.
echo "type==3 && code==3" > events/icmp/icmp_send/filter
Enable trace event.
echo 1 > events/icmp/icmp_send/enable
3. Result View:
================
udp_client_erro-11370 [002] ...s.12 124.728002:
icmp_send: icmp_send: type=3, code=3.
From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23
skbaddr=00000000589b167a
Signed-off-by: Peilin He <he.peilin@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Liu Chun <liu.chun2@zte.com.cn>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 27843ce6ba ("ipvlan: ensure network headers are in skb linear part")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36b62df568 ]
'sk->copied_seq' was updated in the tcp_eat_skb() function when the action
of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the
update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser()
to ensure the accuracy of the 'fionread' feature.
It works for a single stream_verdict scenario, as it also modified
sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicate
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
We do not want to add new proto_ops to implement a new version of
tcp_read_sock, as this would introduce code complexity [1].
We could have added noack and copied_seq to desc, and then called
ops->read_sock. However, unfortunately, other modules didn’t fully
initialize desc to zero. So, for now, we are directly calling
tcp_read_sock_noack() in tcp_bpf.c.
[1]: https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com
Fixes: e5c6de5fa0 ("bpf, sockmap: Incorrectly handling copied_seq")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-3-mrpre@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b6412e697 ]
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions.
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4eae0ee0f1 ]
The arp_req_set_public() function is called with the rtnl lock held,
which provides enough synchronization protection. This makes the RCU
variant of dev_getbyhwaddr() unnecessary. Switch to using the simpler
dev_getbyhwaddr() function since we already have the required rtnl
locking.
This change helps maintain consistency in the networking code by using
the appropriate helper function for the existing locking context.
Since we're not holding the RCU read lock in arp_req_set_public()
existing code could trigger false positive locking warnings.
Fixes: 941666c2e3 ("net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()")
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-2-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5da7c4518 ]
Since commit under Fixes we set the window clamp in accordance
to newly measured rcvbuf scaling_ratio. If the scaling_ratio
decreased significantly we may put ourselves in a situation
where windows become smaller than rcvq_space, preventing
tcp_rcv_space_adjust() from increasing rcvbuf.
The significant decrease of scaling_ratio is far more likely
since commit 697a6c8cec ("tcp: increase the default TCP scaling ratio"),
which increased the "default" scaling ratio from ~30% to 50%.
Hitting the bad condition depends a lot on TCP tuning, and
drivers at play. One of Meta's workloads hits it reliably
under following conditions:
- default rcvbuf of 125k
- sender MTU 1500, receiver MTU 5000
- driver settles on scaling_ratio of 78 for the config above.
Initial rcvq_space gets calculated as TCP_INIT_CWND * tp->advmss
(10 * 5k = 50k). Once we find out the true scaling ratio and
MSS we clamp the windows to 38k. Triggering the condition also
depends on the message sequence of this workload. I can't repro
the problem with simple iperf or TCP_RR-style tests.
Fixes: a2cbb16039 ("tcp: Update window clamping condition")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250217232905.3162187-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d3f3b4367 ]
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191b ("ipv4: use RCU protection in __ip_rt_update_pmtu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 235174b2be ]
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c670bdfa5 ]
Testing with iperf3 using the "pasta" protocol splicer has revealed
a problem in the way tcp handles window advertising in extreme memory
squeeze situations.
Under memory pressure, a socket endpoint may temporarily advertise
a zero-sized window, but this is not stored as part of the socket data.
The reasoning behind this is that it is considered a temporary setting
which shouldn't influence any further calculations.
However, if we happen to stall at an unfortunate value of the current
window size, the algorithm selecting a new value will consistently fail
to advertise a non-zero window once we have freed up enough memory.
This means that this side's notion of the current window size is
different from the one last advertised to the peer, causing the latter
to not send any data to resolve the sitution.
The problem occurs on the iperf3 server side, and the socket in question
is a completely regular socket with the default settings for the
fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket.
The following excerpt of a logging session, with own comments added,
shows more in detail what is happening:
// tcp_v4_rcv(->)
// tcp_rcv_established(->)
[5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ====
[5201<->39222]: tcp_data_queue(->)
[5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0]
[OFO queue: gap: 65480, len: 0]
[5201<->39222]: tcp_data_queue(<-)
[5201<->39222]: __tcp_transmit_skb(->)
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: tcp_select_window(->)
[5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
returning 0
[5201<->39222]: tcp_select_window(<-)
[5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160
[5201<->39222]: [__tcp_transmit_skb(<-)
[5201<->39222]: tcp_rcv_established(<-)
[5201<->39222]: tcp_v4_rcv(<-)
// Receive queue is at 85 buffers and we are out of memory.
// We drop the incoming buffer, although it is in sequence, and decide
// to send an advertisement with a window of zero.
// We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means
// we unconditionally shrink the window.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0]
returning 6104 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// After each read, the algorithm for calculating the new receive
// window in __tcp_cleanup_rbuf() finds it is too small to advertise
// or to update tp->rcv_wnd.
// Meanwhile, the peer thinks the window is zero, and will not send
// any more data to trigger an update from the interrupt mode side.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260099840->260171536 (71696), unread 5428624, qlen 83, ofoq 0]
returning 131072 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// The above pattern repeats again and again, since nothing changes
// between the reads.
[...]
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 265600160->265600160 (0), unread 0, qlen 0, ofoq 0]
returning 54672 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// The receive queue is empty, but no new advertisement has been sent.
// The peer still thinks the receive window is zero, and sends nothing.
// We have ended up in a deadlock situation.
Note that well behaved endpoints will send win0 probes, so the problem
will not occur.
Furthermore, we have observed that in these situations this side may
send out an updated 'th->ack_seq´ which is not stored in tp->rcv_wup
as it should be. Backing ack_seq seems to be harmless, but is of
course still wrong from a protocol viewpoint.
We fix this by updating the socket state correctly when a packet has
been dropped because of memory exhaustion and we have to advertize
a zero window.
Further testing shows that the connection recovers neatly from the
squeeze situation, and traffic can continue indefinitely.
Fixes: e2142825c1 ("net: tcp: send zero-window ACK when no memory")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250127231304.1465565-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25c1a9ca53 ]
I noticed that HyStart incorrectly marks the start of rounds,
leading to inaccurate measurements of ACK train lengths and
resetting the `ca->sample_cnt` variable. This inaccuracy can impact
HyStart's functionality in terminating exponential cwnd growth during
Slow-Start, potentially degrading TCP performance.
The issue arises because the changes introduced in commit 4e1fddc98d
("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
moved the caller of the `bictcp_hystart_reset` function inside the `hystart_update` function.
This modification added an additional condition for triggering the caller,
requiring that (tcp_snd_cwnd(tp) >= hystart_low_window) must also
be satisfied before invoking `bictcp_hystart_reset`.
This fix ensures that `bictcp_hystart_reset` is correctly called
at the start of a new round, regardless of the congestion window size.
This is achieved by moving the condition
(tcp_snd_cwnd(tp) >= hystart_low_window)
from before calling `bictcp_hystart_reset` to after it.
I tested with a client and a server connected through two Linux software routers.
In this setup, the minimum RTT was 150 ms, the bottleneck bandwidth was 50 Mbps,
and the bottleneck buffer size was 1 BDP, calculated as (50M / 1514 / 8) * 0.150 = 619 packets.
I conducted the test twice, transferring data from the server to the client for 1.5 seconds.
Before the patch was applied, HYSTART-DELAY stopped the exponential growth of cwnd when
cwnd = 516, and the bottleneck link was not yet saturated (516 < 619).
After the patch was applied, HYSTART-ACK-TRAIN stopped the exponential growth of cwnd when
cwnd = 632, and the bottleneck link was saturated (632 > 619).
In this test, applying the patch resulted in 300 KB more data delivered.
Fixes: 4e1fddc98d ("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
Signed-off-by: Mahdi Arghavani <ma.arghavani@yahoo.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haibo Zhang <haibo.zhang@otago.ac.nz>
Cc: David Eyers <david.eyers@otago.ac.nz>
Cc: Abbas Arghavani <abbas.arghavani@mdu.se>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3440fa34ad ]
Following fields of 'struct mr_mfc' can be updated
concurrently (no lock protection) from ip_mr_forward()
and ip6_mr_forward()
- bytes
- pkt
- wrong_if
- lastuse
They also can be read from other functions.
Convert bytes, pkt and wrong_if to atomic_long_t,
and use READ_ONCE()/WRITE_ONCE() for lastuse.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250114221049.1190631-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a853c60950 ]
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 90e0569dd3 upstream.
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
ip_tunnel_find+0x435/0x4d0
ip_tunnel_newlink+0x517/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241023123009.749764-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2b639f9f3 ]
Unmask the upper DSCP bits when initializing an IPv4 flow key via
ip_tunnel_init_flow() before passing it to ip_route_output_key() so that
in the future we could perform the FIB lookup according to the full DSCP
value.
Note that the 'tos' variable includes the full DS field. Either the one
specified as part of the tunnel parameters or the one inherited from the
inner packet.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b5a7b661a0 ("net: Fix netns for ip_tunnel_init_flow()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c34cfe72bb ]
Unmask the upper DSCP bits when initializing an IPv4 flow key via
ip_tunnel_init_flow() before passing it to ip_route_output_key() so that
in the future we could perform the FIB lookup according to the full DSCP
value.
Note that the 'tos' variable includes the full DS field. Either the one
specified via the tunnel key or the one inherited from the inner packet.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b5a7b661a0 ("net: Fix netns for ip_tunnel_init_flow()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7191e517a ]
Unmask the upper DSCP bits when initializing an IPv4 flow key via
ip_tunnel_init_flow() before passing it to ip_route_output_key() so that
in the future we could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b5a7b661a0 ("net: Fix netns for ip_tunnel_init_flow()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f694eee9e1 ]
t->parms.link is read locklessly, annotate these reads
and opposite writes accordingly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b5a7b661a0 ("net: Fix netns for ip_tunnel_init_flow()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d888b7af7c ]
When we do sk_psock_verdict_apply->sk_psock_skb_ingress, an sk_msg will
be created out of the skb, and the rmem accounting of the sk_msg will be
handled by the skb.
For skmsgs in __SK_REDIRECT case of tcp_bpf_send_verdict, when redirecting
to the ingress of a socket, although we sk_rmem_schedule and add sk_msg to
the ingress_msg of sk_redir, we do not update sk_rmem_alloc. As a result,
except for the global memory limit, the rmem of sk_redir is nearly
unlimited. Thus, add sk_rmem_alloc related logic to limit the recv buffer.
Since the function sk_msg_recvmsg and __sk_psock_purge_ingress_msg are
used in these two paths. We use "msg->skb" to test whether the sk_msg is
skb backed up. If it's not, we shall do the memory accounting explicitly.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-3-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca70b8baf2 ]
The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging
tosend bytes, which is either msg->sg.size or a smaller value apply_bytes.
Potential problems with this strategy are as follows:
- If the actual sent bytes are smaller than tosend, we need to charge some
bytes back, as in line 487, which is okay but seems not clean.
- When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may
miss uncharging (msg->sg.size - apply_bytes) bytes.
[...]
415 tosend = msg->sg.size;
416 if (psock->apply_bytes && psock->apply_bytes < tosend)
417 tosend = psock->apply_bytes;
[...]
443 sk_msg_return(sk, msg, tosend);
444 release_sock(sk);
446 origsize = msg->sg.size;
447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress,
448 msg, tosend, flags);
449 sent = origsize - msg->sg.size;
[...]
454 lock_sock(sk);
455 if (unlikely(ret < 0)) {
456 int free = sk_msg_free_nocharge(sk, msg);
458 if (!cork)
459 *copied -= free;
460 }
[...]
487 if (eval == __SK_REDIRECT)
488 sk_mem_charge(sk, tosend - sent);
[...]
When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply,
the following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0
Modules linked in:
CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events sk_psock_destroy
RIP: 0010:inet_sock_destruct+0x190/0x1a0
RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206
RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800
RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900
RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0
R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400
R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100
FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x89/0x130
? inet_sock_destruct+0x190/0x1a0
? report_bug+0xfc/0x1e0
? handle_bug+0x5c/0xa0
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? inet_sock_destruct+0x190/0x1a0
__sk_destruct+0x25/0x220
sk_psock_destroy+0x2b2/0x310
process_scheduled_works+0xa3/0x3e0
worker_thread+0x117/0x240
? __pfx_worker_thread+0x10/0x10
kthread+0xcf/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
In __SK_REDIRECT, a more concise way is delaying the uncharging after sent
bytes are finalized, and uncharge this value. When (ret < 0), we shall
invoke sk_msg_free.
Same thing happens in case __SK_DROP, when tosend is set to apply_bytes,
we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same
warning will be reported in selftest.
[...]
468 case __SK_DROP:
469 default:
470 sk_msg_free_partial(sk, msg, tosend);
471 sk_msg_apply_bytes(psock, tosend);
472 *copied -= (tosend + delta);
473 return -EACCES;
[...]
So instead of sk_msg_free_partial we can do sk_msg_free here.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Fixes: 8ec95b9471 ("bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241016234838.3167769-3-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 488b6d91b0 ]
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.
Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240213110428.1681540-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 3301ab7d5a ("net/ipv6: release expired exception dst cached in socket")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc9c273d6d ]
Similar to the previous patch, plumb the RCU lock inside
the ipmr_get_table(), provided a lockless variant and apply
the latter in the few spots were the lock is already held.
Fixes: 709b46e8d9 ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT")
Fixes: f0ad0860d0 ("ipv4: ipmr: support multiple tables")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
