[ Upstream commit 4107a1aeb2 ]
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/cf1f61468b47425ecf3728689bc9636ddd1d910e.1738302337.git.skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de07b18289 ]
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8b ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d33dc1bc3 ]
With CONFIG_KPROBES_ON_FTRACE enabled on powerpc, ftrace_location_range
returns ftrace location for bpf_fentry_test1 at offset of 4 bytes from
function entry. This is because branch to _mcount function is at offset
of 4 bytes in function profile sequence.
To fix this, add entry_offset of 4 bytes while verifying the address for
kprobe entry address of bpf_fentry_test1 in verify_perf_link_info in
selftest, when CONFIG_KPROBES_ON_FTRACE is enabled.
Disassemble of bpf_fentry_test1:
c000000000e4b080 <bpf_fentry_test1>:
c000000000e4b080: a6 02 08 7c mflr r0
c000000000e4b084: b9 e2 22 4b bl c00000000007933c <_mcount>
c000000000e4b088: 01 00 63 38 addi r3,r3,1
c000000000e4b08c: b4 07 63 7c extsw r3,r3
c000000000e4b090: 20 00 80 4e blr
When CONFIG_PPC_FTRACE_OUT_OF_LINE [1] is enabled, these function profile
sequence is moved out of line with an unconditional branch at offset 0.
So, the test works without altering the offset for
'CONFIG_KPROBES_ON_FTRACE && CONFIG_PPC_FTRACE_OUT_OF_LINE' case.
Disassemble of bpf_fentry_test1:
c000000000f95190 <bpf_fentry_test1>:
c000000000f95190: 00 00 00 60 nop
c000000000f95194: 01 00 63 38 addi r3,r3,1
c000000000f95198: b4 07 63 7c extsw r3,r3
c000000000f9519c: 20 00 80 4e blr
[1] https://lore.kernel.org/all/20241030070850.1361304-13-hbathini@linux.ibm.com/
Fixes: 23cf7aa539 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209065720.234344-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2f0791124 ]
Commit f803bcf920 ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf920 ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 68ec5395bc, backport of mainline commit a41b3828ec ("selftests/bpf:
Verify that sync_linked_regs preserves subreg_def") uses the __xlated() that
wasn't in the v6.6 code-base, and causes BPF selftests to fail compilation.
Remove the use of the __xlated() macro in
tools/testing/selftests/bpf/progs/verifier_scalar_ids.c to fix compilation
failure. Without the __xlated() checks the coverage is reduced, however the
test case still functions just fine.
Fixes: 68ec5395bc ("selftests/bpf: Verify that sync_linked_regs preserves subreg_def")
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51f1892b52 upstream.
Add a minimal netlink helper library for the BPF selftests. This has been
taken and cut down and cleaned up from iproute2. This covers basics such
as netdevice creation which we need for BPF selftests / BPF CI given
iproute2 package cannot cover it yet.
Stanislav Fomichev suggested that this could be replaced in future by ynl
tool generated C code once it has RTNL support to create devices. Once we
get to this point the BPF CI would also need to add libmnl. If no further
extensions are needed, a second option could be that we remove this code
again once iproute2 package has support.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 659b9ba7cb upstream.
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 862087c3d3 ]
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce4 ("selftests/bpf: Fix msg_verify_data in test_sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 523dffccba ]
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a4 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147f ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4095031463 ]
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b2bfc2969 ]
Global variables of special types (like `struct bpf_spin_lock`) make
underlying ARRAY maps non-mmapable. To make this work with libbpf's
mmaping logic, application is expected to declare such special variables
as static, so libbpf doesn't even attempt to mmap() such ARRAYs.
test_spin_lock_fail.c didn't follow this rule, but given it relied on
this test to trigger failures, this went unnoticed, as we never got to
the step of mmap()'ing these ARRAY maps.
It is fragile and relies on specific sequence of libbpf steps, which are
an internal implementation details.
Fix the test by marking lockA and lockB as static.
Fixes: c48748aea4 ("selftests/bpf: Add failure test cases for spin lock pairing")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee9b352ce4 ]
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee09 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Fixes: 16edddfe3c ("selftests/bpf: test_sockmap, check test failure")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41f6f64e69 ]
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a41b3828ec ]
This test was added because of a bug in verifier.c:sync_linked_regs(),
upon range propagation it destroyed subreg_def marks for registers.
The test is written in a way to return an upper half of a register
that is affected by range propagation and must have it's subreg_def
preserved. This gives a return value of 0 and leads to undefined
return value if subreg_def mark is not preserved.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240924210844.1758441-2-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit c8c590f07a which is
commit 90a695c3d3 upstream.
Commit c8c590f07a ("selftests/bpf: Implement get_hw_ring_size function
to retrieve current and max interface size") will cause the following
bpf selftests compilation error in the 6.6 stable branch, and it is not
the Stable-dep-of of commit 103c0431c7 ("selftests/bpf: Drop unneeded
error.h includes"). So let's revert commit c8c590f07a to fix this
compilation error.
./network_helpers.h:66:43: error: 'struct ethtool_ringparam' declared
inside parameter list will not be visible outside of this definition or
declaration [-Werror]
66 | int get_hw_ring_size(char *ifname, struct ethtool_ringparam *ring_param);
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8a021e7fa1 ]
This patch simplifies the verification of size arguments associated to
pointer arguments to helpers and kfuncs. Many helpers take a pointer
argument followed by the size of the memory access performed to be
performed through that pointer. Before this patch, the handling of the
size argument in check_mem_size_reg() was confusing and wasteful: if the
size register's lower bound was 0, then the verification was done twice:
once considering the size of the access to be the lower-bound of the
respective argument, and once considering the upper bound (even if the
two are the same). The upper bound checking is a super-set of the
lower-bound checking(*), except: the only point of the lower-bound check
is to handle the case where zero-sized-accesses are explicitly not
allowed and the lower-bound is zero. This static condition is now
checked explicitly, replacing a much more complex, expensive and
confusing verification call to check_helper_mem_access().
Error messages change in this patch. Before, messages about illegal
zero-size accesses depended on the type of the pointer and on other
conditions, and sometimes the message was plain wrong: in some tests
that changed you'll see that the old message was something like "R1 min
value is outside of the allowed memory range", where R1 is the pointer
register; the error was wrongly claiming that the pointer was bad
instead of the size being bad. Other times the information that the size
came for a register with a possible range of values was wrong, and the
error presented the size as a fixed zero. Now the errors refer to the
right register. However, the old error messages did contain useful
information about the pointer register which is now lost; recovering
this information was deemed not important enough.
(*) Besides standing to reason that the checks for a bigger size access
are a super-set of the checks for a smaller size access, I have also
mechanically verified this by reading the code for all types of
pointers. I could convince myself that it's true for all but
PTR_TO_BTF_ID (check_ptr_to_btf_access). There, simply looking
line-by-line does not immediately prove what we want. If anyone has any
qualms, let me know.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231221232225.568730-2-andreimatei1@gmail.com
Stable-dep-of: 8ea607330a ("bpf: Fix overloading of MEM_UNINIT's meaning")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd526e121c ]
Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but
falls back to using 'ld' if unsupported. However, this fallback discards
any existing makefile macro for LD and can break cross-compilation.
Fix by changing the fallback to use the target linker $(LD), passed via
'-fuse-ld=' using an absolute path rather than a linker "flavour".
Fixes: 08c79c9cd6 ("selftests/bpf: Don't force lld on non-x86 architectures")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21c5f4f55d ]
Linux 5.1 implemented 64-bit time types and related syscalls to address the
Y2038 problem generally across archs. Userspace handling of Y2038 varies
with the libc however. While musl libc uses 64-bit time across all 32-bit
and 64-bit platforms, GNU glibc uses 64-bit time on 64-bit platforms but
defaults to 32-bit time on 32-bit platforms unless they "opt-in" to 64-bit
time or explicitly use 64-bit syscalls and time structures.
One specific area is the standard setsockopt() call, SO_TIMESTAMPNS option
used for timestamping, and the related output 'struct timespec'. GNU glibc
defaults as above, also exposing the SO_TIMESTAMPNS_NEW flag to explicitly
use a 64-bit call and 'struct __kernel_timespec'. Since these are not
exposed or needed with musl libc, their use in tc_redirect.c leads to
compile errors building for mips64el/musl:
tc_redirect.c: In function 'rcv_tstamp':
tc_redirect.c:425:32: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
425 | cmsg->cmsg_type == SO_TIMESTAMPNS_NEW)
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
tc_redirect.c:425:32: note: each undeclared identifier is reported only once for each function it appears in
tc_redirect.c: In function 'test_inet_dtime':
tc_redirect.c:491:49: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
491 | err = setsockopt(listen_fd, SOL_SOCKET, SO_TIMESTAMPNS_NEW,
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
However, using SO_TIMESTAMPNS_NEW isn't strictly needed, nor is Y2038 being
explicitly tested. The timestamp checks in tc_redirect.c are simple: the
packet receive timestamp is non-zero and processed/handled in less than 5
seconds.
Switch to using the standard setsockopt() call and SO_TIMESTAMPNS option to
ensure compatibility across glibc and musl libc. In the worst-case, there
is a 5-second window 14 years from now where tc_redirect tests may fail on
32-bit systems. However, we should reasonably expect glibc to adopt a
64-bit mandate rather than the current "opt-in" policy before the Y2038
roll-over.
Fixes: ce6f6cffae ("selftests/bpf: Wait for the netstamp_needed_key static key to be turned on")
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/031d656c058b4e55ceae56ef49c4e1729b5090f3.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9a83e76b5 ]
Include GNU <execinfo.h> header only with glibc and provide weak, stubbed
backtrace functions as a fallback in test_progs.c. This allows for non-GNU
replacements while avoiding compile errors (e.g. with musl libc) like:
test_progs.c:13:10: fatal error: execinfo.h: No such file or directory
13 | #include <execinfo.h> /* backtrace */
| ^~~~~~~~~~~~
test_progs.c: In function 'crash_handler':
test_progs.c:1034:14: error: implicit declaration of function 'backtrace' [-Werror=implicit-function-declaration]
1034 | sz = backtrace(bt, ARRAY_SIZE(bt));
| ^~~~~~~~~
test_progs.c:1045:9: error: implicit declaration of function 'backtrace_symbols_fd' [-Werror=implicit-function-declaration]
1045 | backtrace_symbols_fd(bt, sz, STDERR_FILENO);
| ^~~~~~~~~~~~~~~~~~~~
Fixes: 9fb156bb82 ("selftests/bpf: Print backtrace on SIGSEGV in test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/aa6dc8e23710cb457b278039d0081de7e7b4847d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b795cc59 ]
Compiling lwt_reroute.c with GCC 12.3 for mips64el/musl-libc yields errors:
In file included from .../include/arpa/inet.h:9,
from ./test_progs.h:18,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:11,
from tools/testing/selftests/bpf/prog_tests/lwt_reroute.c:52:
.../include/netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../include/linux/icmp.h:24,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:9:
.../include/linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../include/netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../include/linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
These errors occur because <linux/in6.h> is included before <netinet/in.h>,
bypassing the Linux uapi/libc compat mechanism's partial musl support. As
described in [1] and [2], fix these errors by including <netinet/in.h> in
lwt_reroute.c before any uapi headers.
[1]: commit c0bace7984 ("uapi libc compat: add fallback for unsupported libcs")
[2]: https://git.musl-libc.org/cgit/musl/commit/?id=04983f227238
Fixes: 6c77997bc6 ("selftests/bpf: Add lwt_xmit tests for BPF_REROUTE")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bd2908aec0755ba8b75f5dc41848b00585f5c73e.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7f3187317 ]
Recently, when running './test_progs -j', I occasionally hit the
following errors:
test_lwt_redirect:PASS:pthread_create 0 nsec
test_lwt_redirect_run:FAIL:netns_create unexpected error: 256 (errno 0)
#142/2 lwt_redirect/lwt_redirect_normal_nomac:FAIL
#142 lwt_redirect:FAIL
test_lwt_reroute:PASS:pthread_create 0 nsec
test_lwt_reroute_run:FAIL:netns_create unexpected error: 256 (errno 0)
test_lwt_reroute:PASS:pthread_join 0 nsec
#143/2 lwt_reroute/lwt_reroute_qdisc_dropped:FAIL
#143 lwt_reroute:FAIL
The netns_create() definition looks like below:
#define NETNS "ns_lwt"
static inline int netns_create(void)
{
return system("ip netns add " NETNS);
}
One possibility is that both lwt_redirect and lwt_reroute create
netns with the same name "ns_lwt" which may cause conflict. I tried
the following example:
$ sudo ip netns add abc
$ echo $?
0
$ sudo ip netns add abc
Cannot create namespace file "/var/run/netns/abc": File exists
$ echo $?
1
$
The return code for above netns_create() is 256. The internet search
suggests that the return value for 'ip netns add ns_lwt' is 1, which
matches the above 'sudo ip netns add abc' example.
This patch tried to use different netns names for two tests to avoid
'ip netns add <name>' failure.
I ran './test_progs -j' 10 times and all succeeded with
lwt_redirect/lwt_reroute tests.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240205052914.1742687-1-yonghong.song@linux.dev
Stable-dep-of: 16b795cc59 ("selftests/bpf: Fix redefinition errors compiling lwt_reroute.c")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa95073fd2 ]
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Fixes: 7c8dce4b16 ("bpftool: Make skeleton C code compilable with C++ compiler")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cacf2a5a78 ]
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Fixes: 3fbfadce60 ("bpf: Fix test_lru_sanity5() in test_lru_map.c")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03bfcda1fb ]
Current code parses arguments with strtok_r() using a construct like
char *state = NULL;
while ((next = strtok_r(state ? NULL : input, ",", &state))) {
...
}
where logic assumes the 'state' var can distinguish between first and
subsequent strtok_r() calls, and adjusts parameters accordingly. However,
'state' is strictly internal context for strtok_r() and no such assumptions
are supported in the man page. Moreover, the exact behaviour of 'state'
depends on the libc implementation, making the above code fragile.
Indeed, invoking "./test_progs -t <test_name>" on mips64el/musl will hang,
with the above code in an infinite loop.
Similarly, we see strange behaviour running 'veristat' on mips64el/musl:
$ ./veristat -e file,prog,verdict,insns -C two-ok add-failure
Can't specify more than 9 stats
Rewrite code using a counter to distinguish between strtok_r() calls.
Fixes: 61ddff373f ("selftests/bpf: Improve by-name subtest selection logic in prog_tests")
Fixes: 394169b079 ("selftests/bpf: add comparison mode to veristat")
Fixes: c8bc5e0509 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/392d8bf5559f85fa37926c1494e62312ef252c3d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 730561d3c0 ]
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Fixes: 9e5bd1f763 ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b00f35513 ]
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/decap_sanity.c:9:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from decap_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 70a00e2f1d ("selftests/bpf: Test bpf_skb_adjust_room on CHECKSUM_PARTIAL")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e986ba2d7edccd254b54f7cd049b98f10bafa8c3.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27c4797ce5 ]
Remove a redundant include of '<linux/icmp.h>' which is already provided in
'lwt_helpers.h'. This avoids errors seen compiling for mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from lwt_redirect.c:51:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../linux/icmp.h:24,
from lwt_redirect.c:50:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 43a7c3ef8a ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/3869dda876d5206d2f8d4dd67331c739ceb0c7f8.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit debfa4f628 ]
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
Fixes: 6bcd39d366 ("selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/11c3af75a7eb6bcb7ad9acfae6a6f470c572eb82.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18826fb0b7 ]
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 1f4f80fed2 ("selftests/bpf: test_progs: convert test_tcp_rtt")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e4c43bcb8 ]
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
Fixes: ae173a9157 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bae9a5ce7d ]
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
Fixes: 580d656d80 ("selftests/bpf: Add kfree_skb raw_tp test")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c329b99ef ]
The GNU version of 'struct tcphdr', with members 'doff' and 'urg_ptr', is
not exposed by musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
parse_tcp_hdr_opt.c:18:21: error: 'struct tcphdr' has no member named 'urg_ptr'
18 | .pk6_v6.tcp.urg_ptr = 123,
| ^~~~~~~
parse_tcp_hdr_opt.c:19:21: error: 'struct tcphdr' has no member named 'doff'
19 | .pk6_v6.tcp.doff = 9, /* 16 bytes of options */
| ^~~~
Fixes: cfa7b01189 ("selftests/bpf: tests for using dynptrs to parse skb and xdp buffers")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ac5440213c242c62cb4e0d9e0a9cd5058b6a31f6.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d4bd29e36 ]
Refactor some functions in both user space code and bpf program
as these functions are used by later cgroup/sk_msg tests.
Another change is to mark tp program optional loading as later
patches will use optional loading as well since they have quite
different attachment and testing logic.
There is no functionality change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184904.2976123-1-yonghong.song@linux.dev
Stable-dep-of: 21f0b0af97 ("selftests/bpf: Fix include of <sys/fcntl.h>")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84239a24d1 ]
Replace CHECK in selftest ns_current_pid_tgid with recommended ASSERT_* style.
I also shortened subtest name as the prefix of subtest name is covered
by the test name already.
This patch does fix a testing issue. Currently even if bss->user_{pid,tgid}
is not correct, the test still passed since the clone func returns 0.
I fixed it to return a non-zero value if bss->user_{pid,tgid} is incorrect.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184859.2975543-1-yonghong.song@linux.dev
Stable-dep-of: 21f0b0af97 ("selftests/bpf: Fix include of <sys/fcntl.h>")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6495eb79ca ]
Explicitly include '<linux/build_bug.h>' to fix errors seen compiling with
gcc targeting mips64el/musl-libc:
user_ringbuf.c: In function 'test_user_ringbuf_loop':
user_ringbuf.c:426:9: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
426 | BUILD_BUG_ON(total_samples <= c_max_entries);
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e5a9df51c7 ("selftests/bpf: Add selftests validating the user ringbuf")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b28575f9221ec54871c46a2e87612bb4bbf46ccd.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2c155131b ]
Include <limits.h> in 'bench.h' to provide a UINT_MAX definition and avoid
multiple compile errors against mips64el/musl-libc like:
benchs/bench_local_storage.c: In function 'parse_arg':
benchs/bench_local_storage.c:40:38: error: 'UINT_MAX' undeclared (first use in this function)
40 | if (ret < 1 || ret > UINT_MAX) {
| ^~~~~~~~
benchs/bench_local_storage.c:11:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
10 | #include <test_btf.h>
+++ |+#include <limits.h>
11 |
seen with bench_local_storage.c, bench_local_storage_rcu_tasks_trace.c, and
bench_bpf_hashmap_lookup.c.
Fixes: 7308748925 ("selftests/bpf: Add benchmark for local_storage get")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f64a9d9fcff40a7fca090a65a68a9b62a468e16.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69f409469c ]
The addition of general support for unprivileged tests in test_loader.c
breaks building test_verifier on non-glibc (e.g. musl) systems, due to the
inclusion of glibc extension '<error.h>' in 'unpriv_helpers.c'. However,
the header is actually not needed, so remove it to restore building.
Similarly for sk_lookup.c and flow_dissector.c, error.h is not necessary
and causes problems, so drop them.
Fixes: 1d56ade032 ("selftests/bpf: Unprivileged tests for test_loader.c")
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Fixes: 0905beec9f ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/5664367edf5fea4f3f4b4aec3b182bcfc6edff9c.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
