commit 63cb444418 upstream.
This may confuse user-space clients like plymouth that opens a drm
file descriptor as a result of a hotplug event and then generates a
new event...
Cc: <stable@vger.kernel.org>
Fixes: 5ea1734827 ("drm/vmwgfx: Send a hotplug event at master_set")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 342406e4fb upstream.
For a while, we've had the problem of i2c bus access not grabbing
a runtime PM ref when it's being used in userspace by i2c-dev, resulting
in nouveau spamming the kernel log with errors if anything attempts to
access the i2c bus while the GPU is in runtime suspend. An example:
[ 130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff
Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
on isn't accessible. On x86, the standard behavior for accessing an
unavailable MMIO region is to just return ~0.
Except, that turned out to be a lie. While computers with a clean
concious will return ~0 in this scenario, some machines will actually
completely hang a CPU on certian bad MMIO accesses. This was witnessed
with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
access the i2c bus while the GPU was suspended would result in a CPU
hang:
CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
RIP: 0010:ioread32+0x2b/0x30
Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f
40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
FS: 00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
g94_i2c_aux_xfer+0x326/0x850 [nouveau]
nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
__i2c_transfer+0x14b/0x620
i2c_smbus_xfer_emulated+0x159/0x680
? _raw_spin_unlock_irqrestore+0x1/0x60
? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
? __lock_is_held+0x59/0xa0
__i2c_smbus_xfer+0x138/0x5a0
i2c_smbus_xfer+0x4f/0x80
i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
do_vfs_ioctl+0x408/0x750
ksys_ioctl+0x5e/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f25317f546b
Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]
Yikes! While I wanted to try to make it so that accessing an i2c bus on
nouveau would wake up the GPU as needed, airlied pointed out that pretty
much any usecase for userspace accessing an i2c bus on a GPU (mainly for
the DDC brightness control that some displays have) is going to only be
useful while there's at least one display enabled on the GPU anyway, and
the GPU never sleeps while there's displays running.
Since teaching the i2c bus to wake up the GPU on userspace accesses is a
good deal more difficult than it might seem, mostly due to the fact that
we have to use the i2c bus during runtime resume of the GPU, we instead
opt for the easiest solution: don't let userspace access i2c busses on
the GPU at all while it's in runtime suspend.
Changes since v1:
* Also disable i2c busses that run over DP AUX
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6cd5235c31 ]
The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sharat Masetty <smasetty@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org (open list)
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03981c6ebe ]
I have a Thinkpad X220 Tablet in my hands that is losing vblank
interrupts whenever LP3 watermarks are used.
If I nudge the latency value written to the WM3 register just
by one in either direction the problem disappears. That to me
suggests that the punit will not enter the corrsponding
powersave mode (MPLL shutdown IIRC) unless the latency value
in the register matches exactly what we read from SSKPD. Ie.
it's not really a latency value but rather just a cookie
by which the punit can identify the desired power saving state.
On HSW/BDW this was changed such that we actually just write
the WM level number into those bits, which makes much more
sense given the observed behaviour.
We could try to handle this by disallowing LP3 watermarks
only when vblank interrupts are enabled but we'd first have
to prove that only vblank interrupts are affected, which
seems unlikely. Also we can't grab the wm mutex from the
vblank enable/disable hooks because those are called with
various spinlocks held. Thus we'd have to redesigne the
watermark locking. So to play it safe and keep the code
simple we simply disable LP3 watermarks on all SNB machines.
To do that we simply zero out the latency values for
watermark level 3, and we adjust the watermark computation
to check for that. The behaviour now matches that of the
g4x/vlv/skl wm code in the presence of a zeroed latency
value.
v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris)
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
[ Upstream commit d4fad0a426 ]
Initialize the flow input colorspaces to unknown and reset to that value
when the channel gets disabled. This avoids the state getting mixed up
with a previous mode.
Also keep the CSC settings for the background flow intact when disabling
the foreground flow.
Root-caused-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d85978341 ]
We don't want to overwrite "ret", it already holds the correct error
code. The "regmap" variable might be a valid pointer as this point.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 776e78677f ]
meson_drv_bind() registers a meson_drm struct as the device's privdata,
but meson_drv_unbind() tries to retrieve a drm_device. This may cause a
segfault on shutdown:
[ 5194.593429] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000197
...
[ 5194.788850] Call trace:
[ 5194.791349] drm_dev_unregister+0x1c/0x118 [drm]
[ 5194.795848] meson_drv_unbind+0x50/0x78 [meson_drm]
Retrieve the right pointer in meson_drv_unbind().
Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-1-jean-philippe.brucker@arm.com
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
commit 9fa246256e upstream.
This reverts commit d179b88deb.
This commit is documented to break userspace X.org modesetting driver in certain configurations.
The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.
This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 46f3ceaffa ]
Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable()
to innolux_panel_unprepare(), so they are consistent with
innolux_panel_enable() and innolux_panel_prepare().
This also fixes some mode check and irq timeout issue in MTK dsi code.
Since some dsi code (e.g. mtk_dsi) have following call trace:
1. drm_panel_disable(), which calls innolux_panel_disable()
2. switch to cmd mode
3. drm_panel_unprepare(), which calls innolux_panel_unprepare()
However, mtk_dsi needs to be in cmd mode to be able to send commands
(e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()),
so we need these functions to be called after the switch to cmd mode happens,
i.e. in innolux_panel_unprepare.
Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 663a50ceac ]
shadow mm's pin count got increased in workload preparation phase, which
is after workload scanning.
it will get decreased in complete_current_workload() anyway after
workload completion.
Sometimes, if a workload meets a scanning error, its shadow mm pin count
will not get increased but will get decreased in the end.
This patch lets shadow mm's pin count not go below 0.
Fixes: 2707e44466 ("drm/i915/gvt: vGPU graphics memory virtualization")
Cc: zhenyuw@linux.intel.com
Cc: stable@vger.kernel.org #4.14+
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 890880ddfd ]
When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.
In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.
In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c2d3115538 upstream.
When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd
twice. The first free is in vmw_fb_kms_detach(), the second is near the
end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code
only works correctly if the mode doesn't actually change. Removing
'old_mode' in favor of using par->set_mode directly fixes the problem.
Cc: <stable@vger.kernel.org>
Fixes: a278724aa2 ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc5034a5d2 upstream.
Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: dd220a00e8 ("drm/radeon/kms: add support for streamout v7")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb867d219f ]
The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa3312012f ]
The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.
Move the initialization channel->child = child; down to just
before the call to imx_ldb_register so that intervening failures
don't need to clear it. Add a label at the end of the function to
do all the of_node_puts.
The semantic patch that finds part of this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
* return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c0408dd0d ]
The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fb873c964 ]
This patch fixes backtraces like the following when sending SIGKILL to a
process with a currently pending plane update:
[drm:ipu_plane_atomic_check] CRTC should be enabled
[drm:drm_framebuffer_remove] *ERROR* failed to commit
------------[ cut here ]------------
WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498
atomic remove_fb failed with -22
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b14e945bda ]
When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.
On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.
Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f672b93e4a ]
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
An of_node_put is also needed when meson_probe_remote completes. This was
present at the recursive call, but not in the call from meson_drv_probe.
The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547372691-28324-4-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a63bd6fe1 ]
Initially DP0_SRCCTRL is set to a static value which includes
DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of
1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number.
This patch changes the configuration as follows:
Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct
value.
DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL:
SSCG and BW27. All other bits can be zero.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vicente Bergas
Thomas Hellstrom
Lyude Paul
Chris Wilson
Noralf Trønnes
Christian König
Wen Yang
Damian Kos
Enric Balletbo i Serra
Ville Syrjälä
Lucas Stach
Paul Kocialkowski
Dan Carpenter
Jean-Philippe Brucker
Maarten Lankhorst
Dave Airlie
Kevin Wang
Ilia Mirkin
Hsin-Yi, Wang
YueHaibing
Yan Zhao
Daniel Vetter
Eric Biggers
Thomas Zimmermann
Gustavo A. R. Silva
Tvrtko Ursulin
Steve Longerbeam
Julia Lawall
Alexander Shiyan
Philipp Zabel
Kenneth Feng
Kristian H. Kristensen
Joonas Lahtinen
Takashi Iwai
Tomi Valkeinen