commit ca318e7bbb upstream.
check_transfer() compares the input and output files byte-by-byte using
`cmp -l "$in" "$out" | while read ...`. Because the while-loop body runs
in a subshell (the script sets neither lastpipe nor pipefail), the
fail_test call inside it -- which sets the global ret/last_test_failed --
and the `return 1` both act on the subshell, not on check_transfer().
check_transfer() thus always falls through to `return 0`, and any data
corruption affecting only the payload (leaving the subflow/PM counters
untouched) is silently reported as PASS.
Fixes: 8117dac3e7 ("selftests: mptcp: add invert check in check_transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-5-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6e3abef2a2 ]
The add/remove eprobe test installs an eprobe for the openat syscall and
runs ls. It checks the filenames that were opened by ls against a
whitelist and a blacklist.
Commit 206b25c090 ("tracing: eprobe: read the complete FILTER_PTR_STRING
pointer") fixed access to some string fields in eprobes. This triggers
test failures as the blacklist does not allow relative paths for the
openat parameters.
What makes this test unstable is the fact that the openat calls vary a
lot between different systems.
Refactor the test to make it more robust. "cd <directory>" will issue a
chdir syscall with the target directory as parameter. Set an eprobe on
the sys_enter_chdir event and filter for the exact directory name. Allow
(fault) as fallback.
Link: https://lore.kernel.org/all/20260804194705.760893-1-martin@kaiser.cx/
Fixes: 206b25c090 ("tracing: eprobe: read the complete FILTER_PTR_STRING pointer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202607151010.b68428e1-lkp@intel.com
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8f6f9fd93c upstream.
Patch series "selftests: Add missing initalization of pointer passed to
getline", v2.
This patch (of 2):
Clone3_set_tid uses getline(&line, ...) in a loop to read the child's
process status. The code expects that getline allocates the buffer for
the line on the first loop iteration. According to the Open Group
Spec[1], char *line has to be null pointer for this:
> ssize_t getline(char **restrict lineptr, ...);
> If *lineptr is a null pointer or if the object pointed to by *lineptr
> is of insufficient size, an object shall be allocated as if by
malloc()
> or the object shall be reallocated as if by realloc()[...].
However, char *line is only declared, leading to an undefined value that
is potentially non-null. In an example run with Musl v1.2.6, the realloc
call[2] of getdelim, which implements getline, triggers a segfault:
./run_kselftest.sh --test clone3:clone3_set_tid
[ 1366.165898] kselftest: Running tests in clone3
...
[ 1367.799244] clone3_set_tid[811]: unhandled signal 11 code 0x1 at
0x0000000000000000 in libc.so[68184,3fbf69f000+4c000]
[ 1367.802808] CPU: 0 UID: 0 PID: 811 Comm: clone3_set_tid Not tainted
..
[ 1367.804188] epc: 0x0000003fbf6b0184
[ 1367.804188] ra : 0x0000003fbf6d4664
[ 1367.804188] sp : 0x0000003fce5f2e40
[ 1367.805314] gp : 0x0000002aaab0dfb8
[ 1367.805314] tp : 0x0000003fbf6f14a8
[ 1367.805314] t0 : 0x0000003fbf63d000
...
Looking at the realloc implementation, Musl mallocs for a null pointer
memory. But for a non-null pointer, it assumes it's passed a valid
pointer to the heap and tries to access its meta-data. This leads to the
segfault we see:
void *realloc(void *p, size_t n)
{
if (!p) return malloc(n);
if (size_overflows(n)) return 0;
struct meta *g = get_meta(p);
...
}
Fix this by properly initializing the line pointer to NULL.
Link: https://lore.kernel.org/20260722130246.2135563-1-christian.gellermann@codasip.com
Link: https://lore.kernel.org/20260722130246.2135563-2-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stdio/getdelim.c#n38 [2]
Fixes: 41585bbeee ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Chris Gellermann <christian.gellermann@codasip.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 441a820cce ]
The kselftests doc mentions that a config file should be present "if a
test needs specific kernel config options enabled". This selftest
requires some kernel config, but no config file was provided.
We could say that a sub-target could use the parent's config file, but
the kselftests doc doesn't mention anything about that. Plus the
net/openvswitch target is the only net target without a config file.
Here is a new config file, which is a trimmed version of the net one,
with hopefully the minimal required kconfig on top of 'make defconfig'.
The Fixes tag points to the introduction of the net/openvswitch target,
just to help validating this target on stable kernels.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-2-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8b1abed73 ]
This is required to use unshare(CLONE_NEWUSER).
This has not been seen on NIPA before, because the 'af_unix' tests are
executed with the 'net' ones, merging their config files. USER_NS is
present in tools/testing/selftests/net/config.
This issue is visible when only the af_unix config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: ac011361bd ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-1-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb89f0c1ae ]
In find_controls(), card_data is allocated with malloc() but when
snd_ctl_open_lconf() fails, the code jumps to next_card without
freeing the allocated memory. This results in a memory leak for
each card where snd_ctl_open_lconf() fails.
Add free(card_data) before goto next_card to ensure proper cleanup
of the allocated memory in the error path.
Fixes: 5aaf9efffc ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest")
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Link: https://patch.msgid.link/20260704105736.94874-1-malayarout91@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4ef35efbb ]
In tcp_mmap.c, both child_thread() and main() allocate an EVP_MD_CTX
via EVP_MD_CTX_new() when integrity checking is enabled, but neither
function releases the context. child_thread() misses the free in its
common cleanup block, and main() returns without freeing the context.
This results in a SHA256 context leak on every run that uses the
‑i (integrity) option. Add the missing EVP_MD_CTX_free() calls to
the appropriate cleanup paths to fix the leak.
Fixes: 5c5945dc69 ("selftests/net: Add SHA256 computation over data sent in tcp_mmap")
Signed-off-by: Wang Yan <wangyan01@kylinos.cn>
Link: https://patch.msgid.link/20260702025949.442523-1-wangyan01@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eebbef7c46 ]
Add a HID-BPF regression check for hid_bpf_get_data() requests whose
size would overflow when added to the offset.
The new rdesc fixup callback asks for offset 2 and size ~0ULL, then
records whether the helper returns NULL. A vulnerable kernel returns a
non-NULL pointer because the runtime check wraps the addition. A fixed
kernel rejects the request. The callback records the helper result
without dereferencing any returned pointer.
The callback reports the helper result through BSS and returns 0
intentionally. hid_rdesc_fixup return values are consumed as report
descriptor fixup results, so a positive test-result value would be
interpreted as a replacement report descriptor size.
Also add KHDR_INCLUDES to the HID selftest build so hid_bpf.c sees the
current kernel UAPI HID definitions on systems whose installed headers do
not provide enum hid_report_type.
Fixes: 658ee5a64f ("HID: bpf: allocate data memory for device_event BPF programs")
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae7487d112 ]
For the hid-bpf tests to compile, we need to have the definition of
struct hid_bpf_ctx. This definition is an internal one from the kernel
and it is supposed to be defined in the generated vmlinux.h.
This vmlinux.h header is generated based on the currently running kernel
or if the kernel was already compiled in the tree. If you just compile
the selftests without compiling the kernel beforehand and you are running
on a 6.2 kernel, you'll end up with a vmlinux.h without the hid_bpf_ctx
definition.
Use the clever trick from tools/testing/selftests/bpf/progs/bpf_iter.h
to force the definition of that symbol in case we don't find it in the
BTF and also add __attribute__((preserve_access_index)) to further
support CO-RE functionality for these tests.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # Build
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230825-wip-selftests-v3-1-639963c54109@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Stable-dep-of: eebbef7c46 ("selftests/hid: Cover hid_bpf_get_data() size overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 224ed0e019 ]
Patch series "selftests/mm: assorted fixes for hmm-tests", v3.
This series fixes a few issues in hmm-tests that show up when page-size
and huge-page configuration differ from the hardcoded assumptions the
tests were written for (PMD/THP sizing, default hugepage size, and related
cases).
It also includes a fix to exclusive_cow: the test ignored the return value
of fork(), so both parent and child ran the same teardown path.
This patch (of 3):
The HMM compound testcase currently assumes only PMD-level mappings and
fails on systems where default_hugepagesz=1G is set, because the region is
then reported by the device at PUD level.
Determine the mapping level (PMD or PUD) the device reports for the first
page of the range and require every page to match that level exactly via
ASSERT_EQ(). This accepts PUD-level mappings while preserving the
expected/observed protection values printed on failure, and rejects a
fragmented mapping that mixes PMD- and PUD-level entries within the same
range (which a per-page OR check would have let pass).
Link: https://lore.kernel.org/20260611034102.1030738-1-aboorvad@linux.ibm.com
Link: https://lore.kernel.org/20260611034102.1030738-2-aboorvad@linux.ibm.com
Fixes: e478425bec ("mm/hmm: add tests for hmm_pfn_to_map_order()")
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81eafcada1 ]
Pre-existing issue discovered by sashiko-bot.
mock_get_lsa() and mock_set_lsa() validate the requested LSA range with
"offset + length > LSA_SIZE". Both offset and length are u32 and, in
mock_get_lsa(), both are taken directly from the user-supplied payload.
The addition is evaluated modulo 2^32, so a large offset combined with a
small length wraps around and passes the check.
Rewrite the checks to first bound offset, then compare length against the
remaining LSA size.
Suggested-by: sashiko-bot
Fixes: 7d3eb23c4c ("tools/testing/cxl: Introduce a mock memory device + driver")
Link: https://lore.kernel.org/linux-cxl/20260605143748.235271F00893@smtp.kernel.org/
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e8ad1ff71 ]
For selftest bpf_iter/task_vma, I got a failure like below on my qemu run:
test_task_vma_common:FAIL:compare_output unexpected compare_output:
actual
'561593546000-561593585000r--p0000000000:241256579534/root/devshare/bpf-next/tools/testing/selftests/bpf/test_progs'
!= expected
'561593546000-561593585000r--p0000000000:245551546830/root/devshare/bpf-next/tools/testing/selftests/bpf/test_progs'
Further debugging found out file->f_inode->i_ino value may exceed 32bit,
e.g., i_ino = 0x14c2eae35, but the format string is '%u'. This caused
inode mismatch between bpf iter and proc result.
Fix the issue by using format string '%llu' to accommodate 64bit i_ino.
Fixes: e8168840e1 ("selftests/bpf: Add test for bpf_iter_task_vma")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260610051831.1346659-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 59ac47a027, which is
commit 26285e689c upstream.
The reverted commit extends the selftest to test timestamp event queue mask
manipulation in testptp. It exercises masks PTP_MASK_CLEAR_ALL and
PTP_MASK_EN_SINGLE, introduced in commit c5a445b1e9 ("ptp: support event
queue reader channel masks"), which is not on this stable branch. The test
case thus cannot be built against this tree's own UAPI headers.
The reverted commit was introduced to resolve a missing dependency of
commit 8d9f22c570 ("testptp: Add option to open PHC in readonly mode"),
which is 76868642e4 upstream. The only conflict between the two is the
getopt string, and there is otherwise no direct dependency between the two.
This patch therefore reverts the cited commit, with hand-resolving the
getopt string to include 'r' (as introduced by c6dc458227), but not
'F' (introduced by c1c5068979).
Reported-by: Yong Wang <yongwang@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bebc17b1c0 ]
Add a few test cases to verify precision tracking for scalars gaining
range because of sync_linked_regs():
- check what happens when more than 6 registers might gain range in
sync_linked_regs();
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and one of
linked registers is marked precise;
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and a
other-linked operand of the conditional jump is marked precise;
- add a minimized reproducer for precision tracking bug reported in [0];
- Check that mark_chain_precision() for one of the conditional jump
operands does not trigger equal scalars precision propagation.
[0] https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-4-eddyz87@gmail.com
[ zhenzhong: keep the linked_regs_broken_link_2 reject check, but
drop the mark_precise log expectations because 6.6.y does not derive
the scalar-vs-scalar range for that non-constant JMP_X comparison. ]
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 842edb5507 ]
Function mark_precise_scalar_ids() is superseded by
bt_sync_linked_regs() and equal scalars tracking in jump history.
mark_precise_scalar_ids() propagates precision over registers sharing
same ID on parent/child state boundaries, while jump history records
allow bt_sync_linked_regs() to propagate same information with
instruction level granularity, which is strictly more precise.
This commit removes mark_precise_scalar_ids() and updates test cases
in progs/verifier_scalar_ids to reflect new verifier behavior.
The tests are updated in the following manner:
- mark_precise_scalar_ids() propagated precision regardless of
presence of conditional jumps, while new jump history based logic
only kicks in when conditional jumps are present.
Hence test cases are augmented with conditional jumps to still
trigger precision propagation.
- As equal scalars tracking no longer relies on parent/child state
boundaries some test cases are no longer interesting,
such test cases are removed, namely:
- precision_same_state and precision_cross_state are superseded by
linked_regs_bpf_k;
- precision_same_state_broken_link and equal_scalars_broken_link
are superseded by linked_regs_broken_link.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-3-eddyz87@gmail.com
[ zhenzhong: backport to 6.6.y after adapting the first linked-regs
history commit to the older scalar-id verifier layout. ]
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bf79f9be4 ]
Use bpf_verifier_state->jmp_history to track which registers were
updated by find_equal_scalars() (renamed to collect_linked_regs())
when conditional jump was verified. Use recorded information in
backtrack_insn() to propagate precision.
E.g. for the following program:
while verifying instructions
1: r1 = r0 |
2: if r1 < 8 goto ... | push r0,r1 as linked registers in jmp_history
3: if r0 > 16 goto ... | push r0,r1 as linked registers in jmp_history
4: r2 = r10 |
5: r2 += r0 v mark_chain_precision(r0)
while doing mark_chain_precision(r0)
5: r2 += r0 | mark r0 precise
4: r2 = r10 |
3: if r0 > 16 goto ... | mark r0,r1 as precise
2: if r1 < 8 goto ... | mark r0,r1 as precise
1: r1 = r0 v
Technically, do this as follows:
- Use 10 bits to identify each register that gains range because of
sync_linked_regs():
- 3 bits for frame number;
- 6 bits for register or stack slot number;
- 1 bit to indicate if register is spilled.
- Use u64 as a vector of 6 such records + 4 bits for vector length.
- Augment struct bpf_jmp_history_entry with a field 'linked_regs'
representing such vector.
- When doing check_cond_jmp_op() remember up to 6 registers that
gain range because of sync_linked_regs() in such a vector.
- Don't propagate range information and reset IDs for registers that
don't fit in 6-value vector.
- Push a pair {instruction index, linked registers vector}
to bpf_verifier_state->jmp_history.
- When doing backtrack_insn() check if any of recorded linked
registers is currently marked precise, if so mark all linked
registers as precise.
This also requires fixes for two test_verifier tests:
- precise: test 1
- precise: test 2
Both tests contain the following instruction sequence:
19: (bf) r2 = r9 ; R2=scalar(id=3) R9=scalar(id=3)
20: (a5) if r2 < 0x8 goto pc+1 ; R2=scalar(id=3,umin=8)
21: (95) exit
22: (07) r2 += 1 ; R2_w=scalar(id=3+1,...)
23: (bf) r1 = r10 ; R1_w=fp0 R10=fp0
24: (07) r1 += -8 ; R1_w=fp-8
25: (b7) r3 = 0 ; R3_w=0
26: (85) call bpf_probe_read_kernel#113
The call to bpf_probe_read_kernel() at (26) forces r2 to be precise.
Previously, this forced all registers with same id to become precise
immediately when mark_chain_precision() is called.
After this change, the precision is propagated to registers sharing
same id only when 'if' instruction is backtracked.
Hence verification log for both tests is changed:
regs=r2,r9 -> regs=r2 for instructions 25..20.
Fixes: 904e6ddf41 ("bpf: Use scalar ids in mark_chain_precision()")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-2-eddyz87@gmail.com
Closes: https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
[ zhenzhong: backport to 6.6.y verifier layout and adapt
sync_linked_regs() to the pre-BPF_ADD_CONST scalar-id code. ]
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 4f3c8c7f4e, which is
commit 3d07b691ee upstream.
The cited commit allows testptp to set a configurable clock_id. That is
done via a PTP_SYS_OFFSET_EXTENDED ioctl call, whose argument is struct
ptp_sys_offset_extended, where the clock_id is set. However, this Linux
version does not support the ptp_sys_offset_extended.clockid field, and
the test case cannot be built against this tree's own UAPI headers.
The reverted commit was introduced to resolve a missing dependency of
commit c6dc458227 ("testptp: Add option to open PHC in readonly mode"),
which is 76868642e4 upstream. My suspicion is that the only conflict
between the two is the getopt string, and there is otherwise no direct
dependency between the two.
This patch therefore reverts the cited commit, with hand-resolving the
getopt string to include 'r' (as introduced by c6dc458227), but not
'y' (introduced by 06954f715d).
Reported-by: Yong Wang <yongwang@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 01ff78e4b3 ]
Using the format specifier +%s%3N with GNU date is honoured, and only
prints 3 digits of the nanoseconds portion of the seconds since epoch,
which corresponds to the milliseconds.
The uutils implementation of date currently does not honour this, and
always prints all 9 digits. This is a known issue [1], but can be worked
around by adapting this test to use nanoseconds instead of microseconds,
and then divide it by 1e6.
This fix is similar to what has been done on systemd side [2], and it is
needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0.
Note that the Fixes tag is there even if this patch doesn't fix an issue
in the kernel selftests, but it is useful for those using uutils 0.8.0.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Link: https://github.com/uutils/coreutils/issues/11658 [1]
Link: https://github.com/systemd/systemd/pull/41627 [2]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-6-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85e0f27dd1 upstream.
Fix to point the error offset correctly for eprobe argument error.
In the cleanup commit 1b8b0cd754 ("tracing/probes: Move event parameter
fetching code to common parser"), due to incorrect backward compatibility
aimed at conforming to the test specifications, the error location was set
to 0 when a non-existent formal parameter was specified for Eprobe.
However, this should be corrected in both the test and the implementation
to point correct error position.
Link: https://lore.kernel.org/all/177967567399.209006.1451571244515632097.stgit@devnote2/
Fixes: 1b8b0cd754 ("tracing/probes: Move event parameter fetching code to common parser")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b960430ea8 ]
bpf_bprintf_prepare() only needs ASCII parsing for conversion
specifiers. Plain text can safely carry bytes >= 0x80, so allow
UTF-8 literals outside '%' sequences while keeping ASCII control
bytes rejected and format specifiers ASCII-only.
This keeps existing parsing rules for format directives unchanged,
while allowing helpers such as bpf_trace_printk() to emit UTF-8
literal text.
Update test_snprintf_negative() in the same commit so selftests keep
matching the new plain-text vs format-specifier split during bisection.
Fixes: 48cac3f4a9 ("bpf: Implement formatted output helpers with bstr_printf")
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-2-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2de57a3c8 ]
A per-test override can clear an inherited default option by assigning an
empty value, but __set_test_option() still used option_defined() to decide
whether a per-test key existed. That turned an empty per-test assignment
back into "fall back to the default", so tests still could not clear
inherited settings.
For example:
DEFAULTS
(...)
LOG_FILE = /tmp/ktest-empty-override.log
CLEAR_LOG = 1
ADD_CONFIG = /tmp/.config
TEST_START
TEST_TYPE = build
BUILD_TYPE = nobuild
ADD_CONFIG =
This would run the test with ADD_CONFIG[1] = /tmp/.config
Fix by checking whether the per-test key exists before falling back. If it
does exist but is empty, treat it as unset for that test and stop the
fallback chain there.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-4-565d412f4925@suse.com
Fixes: 22c37a9ac4 ("ktest: Allow tests to undefine default options")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e65886fce ]
GCC 15 reports the below false positive '-Wmaybe-uninitialized' warning
in vphn_unpack_associativity() when building the powerpc selftests.
# make -C tools/testing/selftests TARGETS="powerpc"
[...]
CC test-vphn
In file included from test-vphn.c:3:
In function ‘vphn_unpack_associativity’,
inlined from ‘test_one’ at test-vphn.c:371:2,
inlined from ‘test_vphn’ at test-vphn.c:399:9:
test-vphn.c:10:33: error: ‘be_packed’ may be used uninitialized [-Werror=maybe-uninitialized]
10 | #define be16_to_cpup(x) bswap_16(*x)
| ^~~~~~~~
vphn.c:42:27: note: in expansion of macro ‘be16_to_cpup’
42 | u16 new = be16_to_cpup(field++);
| ^~~~~~~~~~~~
In file included from test-vphn.c:19:
vphn.c: In function ‘test_vphn’:
vphn.c:27:16: note: ‘be_packed’ declared here
27 | __be64 be_packed[VPHN_REGISTER_COUNT];
| ^~~~~~~~~
cc1: all warnings being treated as errors
When vphn_unpack_associativity() is called from hcall_vphn() in kernel
the error is not seen while building vphn.c during kernel compilation.
This is because the top level Makefile includes '-fno-strict-aliasing'
flag always.
The issue here is that GCC 15 emits '-Wmaybe-uninitialized' due to type
punning between __be64[] and __b16* when accessing the buffer via
be16_to_cpup(). The underlying object is fully initialized but GCC 15
fails to track the aliasing due to the strict aliasing violation here.
Please refer [1] and [2]. This results in a false positive warning which
is promoted to an error under '-Werror'. This problem is not seen when
the compilation is performed with GCC 13 and 14. An issue [1] has also
been created on GCC bugzilla.
The selftest compiles fine with '-fno-strict-aliasing'. Since this GCC
flag is used to compile vphn.c in kernel too, the same flag should be
used to build vphn tests when compiling vphn.c in the selftest as well.
Fix this by including '-fno-strict-aliasing' during vphn.c compilation
in the selftest. This keeps the build working while limiting the scope
of the suppression to building vphn tests.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=124427
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99768
Fixes: 58dae82843 ("selftests/powerpc: Add test for VPHN")
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260313165426.43259-1-amachhiw@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37496845c8 ]
In some powerpc/ sub-folder Makefiles, CFLAGS are defined before lib.mk
include. Clean it up by re-ordering the flags to follow after the mk
include. This is needed to support sub-folders in powerpc/ buildable on
its own.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229093711.581230-1-maddy@linux.ibm.com
Stable-dep-of: 6e65886fce ("selftests/powerpc: Suppress -Wmaybe-uninitialized with GCC 15")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gang Yan
Michal Luczaj
Martin Kaiser
Chris Gellermann
Matthieu Baerts (NGI0)
Kuniyuki Iwashima
Malaya Kumar Rout
Daniel Borkmann
Ihor Solodrai
Lorenzo Stoakes
Benjamin Tissoires
Wang Yan
Yiyang Chen
Aboorva Devarajan
Sayali Patil
Leo Yan
Dave Jiang
Yonghong Song
Petr Machata
Eduard Zingerman
Varun R Mallya
Alistair Popple
Tao Cui
Masami Hiramatsu (Google)
Yihan Ding
Ricardo B. Marlière
Waiman Long
AnishMulay
Amit Machhiwal
Madhavan Srinivasan
Andrii Nakryiko