mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-09-22 09:34:56 +02:00
v7.2
19509
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Jakub Kicinski
|
7b53449540 |
Merge tag 'nf-26-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net. Still
large batch for this late -rc cycle but at least half of these fixes
in this batch have been cooking for several weeks before:
1) Fix race between ipset list:set GC and swap, use write_lock instead
of rcu read lock section when accessing the index to ensure
interference with ip_set_swap(), from Xiang Mei.
2) Release template conntrack in bridge conntrack when packet is
neither IPv4 nor IPv6 before setting skb as untracked.
From Zhiling Zou.
3) A series of 3 patches for IPVS to address sashiko reports:
Schedulers read destination overload state while connection
accounting and destination configuration can update it concurrently.
The first patch adds a single total connection counter. The second
patch uses it to identify threshold crossings precisely, and updates
OVERLOAD at the crossings and on a threshold edit under dst_lock.
The third patch moves configuration-controlled AVAILABLE to a
separate cflags word, so it cannot clobber OVERLOAD through an
unrelated read-modify-write update.
4) Log invalid packets in TCP and SCTP connection tracking to address
a deadlock when nfnetlink_log is used as logging backend and the
nfnetlink_log conntrack glue support is used. From Zihan Xi.
5) Wait for rcu grace period before releasing pernet state in
nfnetlink_log, otherwise packets can end up access already released
memory, triggering UaF. From Florian Westphal.
6) IPVS needs to reset IP information in control buffer in skbuff when
encapsulating IP packets in ICMP, from Kyle Zeng.
7) IPVS needs to validate ihl field of inner headers in when handling
ICMP response, from Julian Anastasov.
8) Remove a WARN_ON_ONCE reachable from the nf_tables hardware offload
when triggering ENOMEM on GFP_KERNEL allocation,
from Alexey Velichayshiy.
9) Publish reply tuple into the flowtable hashtable first, otherwise
GC might walk over a released tuple when insertion of the original
tuple fail. From Jeremy Jean.
10) Elide counter increment when replacing an ipset element,
from Florian Westphal.
11) Remove unneeded ipset accounting resets on destruction/flush,
from Florian Westphal.
* tag 'nf-26-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: let destroy callbacks adjust ext mem size
netfilter: ipset: fix list type element drift bug
netfilter: flowtable: publish GC-visible tuple last
netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path
ipvs: revalidate ihl to prevent out-of-bounds access
ipvs: clear IPv4 options after rebasing tunnel ICMP errors
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
netfilter: nf_conntrack: defer invalid log until after unlock
ipvs: separate destination availability state
ipvs: properly update the overload flag on dest edit
ipvs: add totalconns for dest
netfilter: bridge: release template ct on non-IP path
netfilter: ipset: fix refcount race between list:set GC and swap
====================
Link: https://patch.msgid.link/20260810190621.894119-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
 Chengfeng Ye
|
bc5bde9ce3 |
ipv4: fix use-after-free in fib_nhc_update_mtu()
fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but
RTNL does not serialize this walk with PMTU exception updates. The walk
uses rcu_dereference_protected() with a constant true condition without
holding fnhe_lock.
The following interleaving can therefore occur:
CPU 0 CPU 1
fib_nhc_update_mtu() update_or_create_fnhe()
load fnhe spin_lock_bh(&fnhe_lock)
fnhe_remove_oldest()
unlink fnhe
kfree_rcu(fnhe, rcu)
<quiescent state>
access fnhe after grace period
KASAN reported:
BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410
Read of size 8 at addr ffff888107d49000 by task poc/90
Call Trace:
fib_nhc_update_mtu+0x3df/0x410
fib_sync_mtu+0x7a/0xd0
fib_netdev_event+0x229/0x3f0
netif_set_mtu_ext+0x33a/0x570
dev_set_mtu+0x88/0x120
The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a
pair and other writers serialize them with fnhe_lock. RCU alone prevents
reclamation, but would still allow concurrent writers to leave a mixed
pair.
Walk the table under RCU and acquire fnhe_lock only while updating each
exception. RCU keeps the current entry alive while the short critical
section serializes its paired PMTU fields. This avoids holding the global
lock while scanning all 2048 buckets for every nexthop.
Fixes:
|
||
 Hyunjung Ko
|
883b56ae58 |
net/sched: act_gact, act_police: range check the fallback control action
tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so with pval = 1 gact_determ() returns the fallback for every packet. act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and tcf_police_mtu_check() always passes. TC_ACT_CONSUMED was added by commit |
||
 Julian Anastasov
|
d93660df4d |
ipvs: revalidate ihl to prevent out-of-bounds access
While the outer IP header is already pulled into the skb head,
we must be careful and revalidate the embedded headers after
reading them from the skb frags to prevent out-of-bounds
access.
One such place reported by Sashiko is ip_vs_nat_icmp() where
local process can change the ihl field and after
skb_ensure_writable() we can see larger value which is a
problem for the ip_send_check(cih) calls.
Add check to drop the packet if the ihl field is changed.
Fixes:
|
||
 Yizhou Zhao
|
cdcc4e4618 |
ipvs: separate destination availability state
IPVS configuration paths update destination availability while connection
accounting updates destination overload state. The two independent states
share dest->flags, so their read-modify-write updates can race and lose one
another.
Keep OVERLOAD in flags, where the preceding patch serializes its updates
with dst_lock, and move AVAILABLE to cflags. This keeps configuration-
controlled availability out of the scheduler hot cacheline until a
scheduler needs to check it. It also prevents availability updates from
clobbering overload state.
The destination status bits are not exposed through the IPVS sockopt or
netlink interfaces, so keep their definitions in the internal IPVS header.
Readers can still observe stale destination state; this does not provide a
cross-field snapshot.
Fixes:
|
||
|
Julian Anastasov
|
8f843441c4 |
ipvs: properly update the overload flag on dest edit
The upper/lower connection thresholds for dest can be changed,
so use ip_vs_dest_update_overload() to properly update the
dest overload flag.
The thresholds were not limited, fit them in the 0 .. INT_MAX
range as already done in ipvsadm.
As the thresholds are also read when connections are created
and expired, use WRITE_ONCE/READ_ONCE to access them.
As the lower threshold is optional, use (u - (u >> 2)) to
calculate the 75% default value based on the upper threshold
by preserving the integer rounding, as suggested by Yizhou Zhao.
Trigger flag update when totalconns reaches one of the
thresholds and use dst_lock to serialize the updating.
Fixes:
|
||
|
Julian Anastasov
|
04d2feaed8 |
ipvs: add totalconns for dest
Replace the inactconns dest counter with totalconns, now
inactconns can be obtained from totalconns - activeconns.
This reduces the atomic inc/dec ops for TCP/SCTP from
6 to 4 if the connection is established and then closed.
Fixes:
|
||
 Jérémy Jean
|
3dbb44d88b |
sctp: validate cookie AUTH state before use
When cookie authentication is disabled, COOKIE_ECHO restores fixed-size AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM length, HMAC list, or CHUNKS list can then reach association consumers with lengths or identifiers that were never validated against the local backing arrays. A forged RANDOM length can cause out-of-bounds reads during key-vector construction. A forged HMAC identifier also caused a 32-byte write past a zero-length AUTH chunk, providing a primitive for a local privilege escalation chain. Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie trust boundary before copying them into the association. Reject invalid types, malformed lengths, unsupported HMAC identifiers, HMAC lists without SHA1, and forbidden chunk ids. Fixes: |
||
 Zijie Huang
|
dedd34b0f2 |
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth.
Fixes:
|
||
|
Jakub Kicinski
|
9113e98eb7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Partial pull of the nf-26-07-31 tag Pablo says: ==================== The following patchset contains Netfilter/IPVS fixes net, this includes fixes for ebtables nflog target, ipset hash type, IPVS kthread estimator 1) Prevent IPVS kthread estimator from draining the est_temp_list when netns is being dismantled. From Zhiling Zou. 2) Missing module nflog refcount bump from ebtables nflog target from .checkentry path. Similar dependency exists already in xt_NFLOG and nft_log. From Chengfeng Ye. 3) Use RCU to fix ipset bookkeeping of cidr values on weakly-ordered architectures. From Jozsef Kadlecsik. 4) Use atomic64_t for set->ext_size in ipset to fix parallel inserts and deletes racing on updating it. From Jozsef Kadlecsik. 5) Add small wrappers for hash and bucket size to prepare the update of ipset hash set types to rhashtable, from Florian Westphal. 6) Add mtype_del_cidr_all() and use it to prepare the migration of ipset hash types to rhashtable. From Florian Westphal. 7) Replace existing ipset call_rcu() based destruction with rcu_work api also to ease the transition to rhashtable. Also from Florian. 8) Avoid reading the IPv4 ihl field multiple times to prevent local attacker to cause out-of-bounds write in ip_vs_nat_icmp(), from Julian Anastasov. 9) Restore the checksum validations that could be needed by the IPVS FORWARD hook. Also from Julian. ==================== Link: https://patch.msgid.link/20260731151806.849724-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Kyle Zeng
|
0e243671bc |
ipv6: prevent in6_dev_get() from resurrecting inet6_dev
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally increments its refcount. Device teardown can clear the pointer and drop the last reference between these operations. The increment then resurrects an object whose RCU free has already been queued, so callers can use it after it is freed. Use refcount_inc_not_zero() and return NULL when the object has already reached zero. RCU keeps the memory accessible through the attempted reference acquisition, and a successful increment pins the object for the caller. An independent run on the exact unpatched |
||
 Stanislav Fomichev
|
849b1664db |
xsk: validate metadata when processing requests
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation.
Fixes:
|
||
|
Stanislav Fomichev
|
ddd0d6c5bf |
xsk: move xsk_tx_metadata_request() to xdp_sock_drv.h
xsk_tx_metadata_request() must validate metadata with
xsk_buff_valid_tx_metadata(), which is defined in xdp_sock_drv.h. Move the
helper there before adding that dependency. All callers already include
the destination header, so this has no functional effect.
Fixes:
|
||
|
Stanislav Fomichev
|
439ce2dddf |
xsk: validate launch-time metadata size
Launch-time metadata extends beyond the first 16 bytes of struct
xsk_tx_metadata. Reject the request when the registered metadata area does
not contain the complete field.
Snapshot the validated flags for the generic transmit path and use that
snapshot for request and completion processing, avoiding inconsistent
decisions if user space changes the flags concurrently.
Note that only xsk_skb_metadata is properly using the flags,
__xsk_buff_get_metadata ignores them. Next commits address that.
Fixes:
|
||
|
Stanislav Fomichev
|
9f60a67df8 |
xsk: clear metadata pointer when no timestamp is requested
User space can change metadata flags after request processing. Rereading
them during completion can therefore make the kernel write a timestamp
that was not requested when the packet was submitted.
Clear the metadata pointer during request processing unless timestamp
completion is requested. Completion handling can then use the pointer
itself instead of rereading the flags.
On the mlx5 multi-packet WQE path metadata is evaluated per batch:
xsk_tx_metadata_request() runs only for the descriptor that starts a
session, just like the checksum offload that is applied once through the
shared WQE. Only that descriptor's pointer is reset, so completion
handling can record a timestamp for the other descriptors of the session
regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays
inside the metadata area; the single-WQE, other zero-copy, and generic
paths reset the pointer per descriptor and are unaffected.
Fixes:
|
||
|
Stanislav Fomichev
|
19366db6df |
xsk: pass TX metadata pointer by reference
Completion handling needs to know whether a timestamp was requested when
the metadata was processed. Let xsk_tx_metadata_request() update the
caller's metadata pointer so that decision can be carried forward without
rereading user-controlled flags.
This only changes the interface; behavior remains unchanged.
Fixes:
|
||
|
Julian Anastasov
|
99609cb0aa |
ipvs: return the csum validation for forward hook
Sashiko notes that playing games with the skb dst and rt
flags instead of providing hooknum is not a good idea
when validating the checksums.
Also, skipping checksum validation for FORWARD packets
risk silent data corruption, even if the only user is
the FTP-CMD packets coming from the real server.
Sashiko also noticed that by using common checksum
helper in the previous commit we actually fixed old bug
where the TCP/UDP checksum for IPv6 on CHECKSUM_COMPLETE
was not validated correctly.
Fixes:
|
||
|
Julian Anastasov
|
646922a037 |
ipvs: avoid out-of-bounds write in ip_vs_nat_icmp
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once.
Fixes:
|
||
 Pauli Virtanen
|
af24e338bf |
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data.
Fixes:
|
||
|
Jakub Kicinski
|
53658c6f36 |
Merge tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
 Maciej Fijalkowski
|
72f2b4516f |
xsk: reclaim invalid Tx descriptors in ZC batch path
The zero-copy Tx batch parser stops when it encounters an invalid
descriptor. If this happens after one or more continuation descriptors,
the Tx consumer can be advanced past fragments that are neither submitted
to the driver nor returned to userspace through the completion ring.
A similar problem occurs when a packet exceeds xdp_zc_max_segs. The
descriptors consumed up to the limit are released without completion, and
the remaining continuation descriptors can subsequently be interpreted
as the beginning of another packet.
Parse Tx batches in packet units and distinguish descriptors belonging to
complete valid packets from descriptors consumed while draining an
invalid or oversized packet. Return the former to the driver and append
the latter to the CQ address area so userspace can reclaim their UMEM
frames.
Treat a standalone invalid descriptor as a one-descriptor reclaim-only
packet. Advancing the Tx-ring consumer releases the ring slot, but does
not by itself return ownership of the referenced UMEM frame to userspace.
Once draining starts, continue until the packet's end-of-packet
descriptor is consumed. Preserve the drain state on the socket when EOP
has not yet been supplied, so draining can continue during a later call.
Leave incomplete but otherwise valid packets on the Tx ring.
Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing.
Walk their Tx sockets one packet at a time, preserving the existing
per-socket fairness scheme, instead of using the legacy one-descriptor
fallback. Keep that fallback for shared pools that do not use
multi-buffer Tx. Since the drain state is maintained per socket and both
the singular and shared paths can resume an interrupted drain, changing
the socket list from singular to shared requires no special bind-time
transition.
CQ entries are positional, and drivers may complete only part of the Tx
work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only
entries cannot be published immediately when earlier driver-visible
descriptors are still outstanding.
Track the number of driver-visible CQ entries preceding the reclaim
entries. Let xsk_tx_completed() publish partial hardware Tx completions,
and publish the reclaim entries only after every earlier Tx descriptor
has completed. Complete a reclaim-only batch immediately when there is no
driver-visible work in front of it, and prevent another Tx batch from
being appended while reclaim entries remain pending.
Also cap batch processing by the size of the pool's temporary descriptor
array, as Tx rings belonging to sockets sharing a UMEM may have different
sizes.
This ensures that every invalid Tx descriptor consumed by the ZC batch
path is either submitted to the driver as part of a valid packet or
returned to userspace without violating CQ completion ordering.
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes:
|
||
|
Maciej Fijalkowski
|
08c9a8e794 |
xsk: provide sufficient space in pool->tx_descs
The temporary Tx descriptor array in an XSK buffer pool is currently
sized from the Tx ring of the socket that creates the pool.
This is insufficient for shared-UMEM Tx. A later socket may have a
larger Tx ring and submit a valid multi-buffer packet containing more
descriptors than the first socket's ring, while still remaining within
the device's xdp_zc_max_segs limit.
A packet-framed batch parser bounded by the temporary array cannot reach
the end-of-packet descriptor in that case. It leaves the packet on the
Tx ring and encounters the same packet on every subsequent attempt,
stalling Tx processing for that socket.
Size the temporary descriptor array to the larger of the first Tx ring
and the device's xdp_zc_max_segs capability. This keeps the array large
enough to inspect one maximum-sized valid packet. Larger shared Tx rings
do not require further resizing, as they can be processed over multiple
batches.
Following commit will actually address the data path side.
Fixes:
|
||
 Jason Xing
|
bd44a6dcd4 |
xsk: drain continuation descs after overflow in xsk_build_skb()
Fix generic xmit path multi-buffer logic when packets are either too big
(count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is
included in fragmented packet. Introduce xdp_sock::drain_cont and act
upon this flag - when it is set, keep on consuming descriptors from
AF_XDP Tx ring and put them directly onto Cq. Previously these
descriptors were silently lost and could never be reached again.
Fixes:
|
||
|
Julian Anastasov
|
342e24a339 |
ipvs: do not mangle ICMP replies for non-first fragments
Sashiko warns that ip_vs_nat_icmp() unconditionally mangles the
payload for embedded non-first IPv4 fragments. The problem is
in the very old inverted pp->dont_defrag check which should not
continue when embedded is a non-first TCP/UDP/SCTP fragment.
Check for embedded non-first fragment is also missing from
ip_vs_out_icmp_v6(), it is needed before any connection
lookups that expect ports after the network headers.
Drop the blocking code from ip_vs_in_icmp_v6() which prevents
ICMPv6 from local clients to use non-MASQ forwarding.
Fixes:
|
||
|
Julian Anastasov
|
15cab31a37 |
ipvs: fix places with wrong packet offsets
The offsets we use to packet headers and payloads should be
based on skb->data. We even already respect non-zero
network offset in ip_vs_fill_iph_skb() but some places
do it wrongly and support only zero offset which is expected
for the IP layer where IPVS has hooks.
Change all places that instead of skb->data use offsets based
on the network header (skb_network_header, ip_hdr, etc) because
this doubles the network offset as noted by Sashiko.
For ip_vs_nat_icmp_v6() we can even rely on the IPv6 header
parsing done by the caller.
Fixes:
|
||
|
Julian Anastasov
|
e876b75b90 |
ipvs: fix the checksum validations
ip_vs_in_icmp_v6() is missing checksum validation for ICMPv6
packets from clients. In fact, as for TCP/UDP we should
validate the checksum for ICMP packets only when we
mangle the packets on MASQ or on reply for tunnel.
Also, Sashiko points out that handle_response_icmp() being
common for IPv4 and IPv6 is missing the pseudo-header
calculation while validating ICMPv6 messages from real
servers which is a problem if checksum is not validated
by the hardware.
Fix the problems by creating ip_vs_checksum_common_check()
helper and use it for TCP/UDP/ICMP both for IPv4 and IPv6.
Rely on the nf_checksum() for validating the ICMP messages
but use it also for TCP and UDP.
Use correct IP offset for IP_VS_DBG_RL_PKT for TCP/UDP/SCTP.
IPVS packets (TCP/UDP/SCTP/ICMP) do not need checksum
validation on LOCAL_OUT (local clients or local real
servers) and on FORWARD (traffic from servers on LAN).
Do it only on LOCAL_IN, in case nf_checksum() is not
called on PRE_ROUTING.
Also, ip_vs_checksum_complete() can be marked static.
Fixes:
|
||
 Pablo Neira Ayuso
|
f4f6997905 |
netfilter: nf_tables: make nft_object rhltable per table
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup().
Fixes:
|
||
 Yuxiang Yang
|
a28c4fcbf7 |
tcp: challenge ACK for non-exact RST in SYN-RECEIVED
The SYN-RECEIVED request-socket path in tcp_check_req() accepts an
in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A
non-exact RST therefore removes the request instead of eliciting a
challenge ACK.
RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in
SYN-RECEIVED: an exact RST resets the connection, while a non-exact
in-window RST must trigger a challenge ACK and be dropped.
Apply that check before the ACK-field validation, following the RFC
sequence-number, RST, then ACK processing order. Factor the per-netns
challenge ACK quota out of tcp_send_challenge_ack() so request sockets
can share it. Use the request socket's send_ack() callback and its own
out-of-window ACK timestamp to send and rate-limit the response.
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Fixes:
|
||
|
Pablo Neira Ayuso
|
4aa63842fc |
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
Add a new function to insert a pair of expectations, this is required by
the SIP and H323 NAT helpers. The spinlock is held to check if there is
a slot for both expectations, in such case, insert them.
This removes the need for nf_ct_unexpect_related() inside the loop to
find a pair of consecutive ports, otherwise inserting expectations whose
dead flag is already set on can happen.
Bump master_help->expecting for the expectation class after checking if
the expectation fits in the master expectation list, which is needed for
this new _pair() function variant to run the eviction routine including
the preallocated slot for the first expectation in the pair.
Fixes:
|
||
|
Jakub Kicinski
|
9a67bbfe48 |
Merge tag 'for-net-2026-07-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_sync: Protect UUID list traversal - RFCOMM: Fix session UAF in set_termios - btusb: validate Realtek vendor event length * tag 'for-net-2026-07-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btusb: validate Realtek vendor event length Bluetooth: RFCOMM: Fix session UAF in set_termios Bluetooth: hci_sync: Protect UUID list traversal ==================== Link: https://patch.msgid.link/20260721160240.884274-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Jamal Hadi Salim
|
ec48b3be2c |
net/sched: Handle TC_ACT_REDIRECT from qdisc filter chains
When a TC filter attached to a qdisc filter chain returns TC_ACT_REDIRECT (ex: via an eBPF program calling bpf_redirect() or an act_bpf action), the redirect was silently lost i.e no qdisc classify function handled TC_ACT_REDIRECT, so the packet fell through the switch and was enqueued normally instead of being redirected. This has been broken since bpf_redirect() was introduced for TC in commit |
||
|
Chengfeng Ye
|
c783399efc |
Bluetooth: RFCOMM: Fix session UAF in set_termios
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send.
Fixes:
|
||
 Xin Long
|
e0b5252a59 |
sctp: fix auth_hmacs array size in struct sctp_cookie
The auth_hmacs array in struct sctp_cookie is supposed to store a complete
SCTP_AUTH_HMAC_ALGO parameter, which consists of a struct sctp_paramhdr
followed by N HMAC identifiers.
However, the array size was calculated using an extra 2 bytes instead of
sizeof(struct sctp_paramhdr), which is 4 bytes. When four HMAC identifiers
are configured, the HMAC-ALGO parameter stored in the endpoint is larger
than the auth_hmacs buffer in the cookie.
As a result, sctp_association_init() copies beyond the end of auth_hmacs
when initializing the association, corrupting the adjacent auth_chunks
field. This can lead to an invalid HMAC identifier being accepted and later
cause an out-of-bounds read in sctp_auth_get_hmac().
Fix the array size calculation by including the full SCTP parameter header
size.
Fixes:
|
||
 Mikhail Gavrilov
|
c1cec2bbbe |
Bluetooth: mgmt: Translate HCI reason in Device Disconnected event
MGMT_EV_DEVICE_DISCONNECTED carries a reason field which is defined to
be one of MGMT_DEV_DISCONN_* (0x00..0x05). hci_disconn_complete_evt()
converts the HCI error with hci_to_mgmt_reason(), but two other paths
pass the raw HCI error straight through:
hci_cs_disconnect() -> cp->reason
mgmt_connect_failed() -> status
The latter is reached whenever the adapter is powered off or suspended:
hci_disconnect_all_sync() aborts every link with
HCI_ERROR_REMOTE_POWER_OFF, hci_disconnect_sync() deliberately does not
wait for HCI_EV_DISCONN_COMPLETE for that reason, so that
hci_abort_conn_sync() finishes the connection off through
hci_conn_failed() instead.
As a result userspace sees an out of range reason:
@ MGMT Event: Device Disconnected (0x000c) plen 8
BR/EDR Address: 8C:A9:6F:2C:51:46
Reason: Reserved (0x15)
bluetoothd: btd_bearer_disconnected() Unknown disconnection value: 21
bluetoothd: device_disconnected() Unknown disconnection value: 21
Export hci_to_mgmt_reason() and use it in both places, so that a power
off is reported as MGMT_DEV_DISCONN_REMOTE rather than as the raw
HCI_ERROR_REMOTE_POWER_OFF (0x15).
Fixes:
|
||
 Paolo Abeni
|
389704eb51 |
Merge tag 'ipsec-2026-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-07-10
1) xfrm: propagate -EINPROGRESS from validate_xmit_xfrm()
Return -EINPROGRESS from xfrm_output_one when validate_xmit_xfrm
requeues the packet asynchronously, so the caller doesn't treat it
as a real error and free the skb.
2) xfrm: fix stale skb->prev after async crypto steals a GSO segment
Re-derive skb->prev from the fragment list after async crypto splits
a GSO skb, keeping the linked-list pointers validi.
3) xfrm: nat_keepalive: avoid double free on send error
Hold a state ref while the nat_keepalive timer is active and drop the
timer before freeing the state, preventing a re-entered free on send
error.
4) xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
Null the skb dst cache before freeing the policy so a later skb
destructor doesn't double-free it.
5) xfrm: cache the offload ifindex for netlink dumps
Cache the device ifindex at state-add time and use it for netlink
dumps instead of dereferencing dst->dev, which may have changed by
the time the dump runs.
6) xfrm: reject optional IPTFS templates in outbound policies
Reject outbound policies with an optional IPTFS template,
IPTFS must always be used if configured.
7) xfrm: clear mode callbacks after failed mode setup
Clear the mode->init_flags and init_state callbacks on the error path
after xfrm_init_mode fails, so a partially-initialised mode isn't
reused in xfrm_state_construct.
8) xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
Propagate SKBFL_SHARED_FRAG from the original skb to fragments
allocated by iptfs_skb_add_frags, keeping shared-fragment accounting
correct after IPTFS reassembly.
9) xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()
Clear dst->dev on the error path of xfrm6_fill_dst() so the caller
doesn't release the netdev reference twice via dst_release.
10) xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
Preallocate all inexact hash bins before existing entries are
reinserted during xfrm_hash_rebuild, so reinsertion always hits an
existing bin.
Please pull or let me know if there are problems.
ipsec-2026-07-10
* tag 'ipsec-2026-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()
xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
xfrm: clear mode callbacks after failed mode setup
xfrm: reject optional IPTFS templates in outbound policies
xfrm: cache the offload ifindex for netlink dumps
xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
xfrm: nat_keepalive: avoid double free on send error
xfrm: fix stale skb->prev after async crypto steals a GSO segment
xfrm: propagate -EINPROGRESS from validate_xmit_xfrm()
====================
Link: https://patch.msgid.link/20260710090349.343389-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Paolo Abeni
|
a0d82fb850 |
Merge tag 'wireless-2026-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says: ==================== Too many robustness fixes to list. Mostly for - slight out-of-bounds reads of SKBs, - leaks on error conditions, and - malformed netlink input rejection. * tag 'wireless-2026-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (46 commits) wifi: cfg80211: bound element ID read when checking non-inheritance wifi: brcmfmac: cyw: fix heap overflow on a short auth frame wifi: brcmfmac: initialize SDIO data work before cleanup wifi: cfg80211: validate assoc response length before status and IE access wifi: cfg80211: validate rx/tx MLME callback frame lengths before access wifi: mac80211: ibss: wait for in-flight TX on disconnect wifi: mac80211: recalculate rx_nss on IBSS peer capability update wifi: cfg80211: use wiphy work for socket owner autodisconnect wifi: mac80211: fix memory leak in ieee80211_register_hw() wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock wifi: mac80211: validate deauth frame length before reason access wifi: mac80211: avoid non-S1G AID fallback for S1G assoc wifi: cfg80211: reject empty PMSR peer lists wifi: cfg80211: reject unsupported PMSR FTM location requests wifi: cfg80211: validate PMSR FTM preamble range wifi: cfg80211: validate PMSR measurement type data wifi: nl80211: constrain MBSSID TX link ID range wifi: nl80211: validate nested MBSSID IE blobs wifi: ieee80211: validate MLE common info length wifi: cfg80211: derive S1G beacon TSF from S1G fields ... ==================== Link: https://patch.msgid.link/20260709115038.243870-3-johannes@sipsolutions.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Paolo Abeni
|
24c4c88259 |
Merge tag 'nf-26-07-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says: ==================== netfilter: updates for net The following patchset contains Netfilter fixes for *net*. Most of these are LLM fixes for old issues flagged by sashiko/LLMs. Many of these trigger drive-by-findings in sashiko. In particular: - many load/store tearing and missing memory barriers, races etc. in ipset, esp. with GC and resizing. Keeping the proposed patches spinning for yet-another-iteration keeps legit fixes back, so I prefer to add these now and follow up with other reports later. - flowtable work queue still has possible races with teardown, but same rationale as with ipset: drive-by findings, not problems coming with the flowtable IPIP changeset in this PR. - ever since unreadable frag skb support was added in 6.12, we can no longer do: BUG_ON(skb_copy_bits( ...): it will fire with such skbs. Mina Almasry is looking at similar patterns elsewhere in the stack. 1) Guard skb->mac_header adjustment after IPv6 defragmentation in nf_conntrack_reasm. From Xiang Mei. 2) NUL-terminate ebtables table names before calling find_table_lock() to prevent stack-out-of-bounds reads. Also from Xiang Mei. 3) Zero the ebtables chainstack array, else error unwind may free bogus pointer when CPU mask is sparse. All three issues date from 2.6 days. 4) Ensure ebtables module names are c-strings, same bug pattern as 2). Bug added in 4.6. 5) Fix catchall element handling for inverted lookups in nft_lookup. Fold the catchall lookup into ext before computing the match status. Was like this ever since catchall elements got introduced in 5.13. From Tamaki Yanagawa. 6-9) ipset updates from Jozsef Kadlecsik: - mark rcu protected areas correctly - address gc and resize clash in the comment extension - add/del backlog cleanup in the error path - allocate right size for the generic hash structure 10-12): IPIP flowtable updates from Pablo Neira Ayuso: - Use the current direction's route when pushing IPIP headers Fix incorrect headroom and fragmentation offset calculations. - Avoid hardware offload for IPIP tunnels due to lack of driver support. - Support IPIP tunnels with direct xmit in netfilter flowtable. dst_cache and dst_cookie are moved outside the union to share route state across flows. This is a followup to work done in 6.19 cycle. 13) Don't BUG() on skb_copy_bits error. Handle unreadable fragments by either returning an error or restricting the copy operations to linear area, This became an issue when unreable frag support was merged in 6.12. 14-16): IPVS updates from Yizhou Zhao: - Pass parsed transport offset to IPVS state handlers. update callback signatures. - use correct transport header offset on state lookp in TCP. As-is it was possible for ipv6 extension header data to be treated as L4 header. - same for SCTP. This was also broken since 2.6 days. 17) Ensure inner IP headers in ICMP errors are in the skb headroom after stripping outer headers. Add more checks for the length of inner headers. This was broken since 3.7 days. From Julian Anastasov. netfilter pull request nf-26-07-08 * tag 'nf-26-07-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: ipvs: ensure inner headers in ICMP errors are in headroom ipvs: use parsed transport offset in SCTP state lookup ipvs: use parsed transport offset in TCP state lookup ipvs: pass parsed transport offset to state handlers netfilter: handle unreadable frags netfilter: flowtable: support IPIP tunnel with direct xmit netfilter: flowtable: IPIP tunnel hardware offload is not yet support netfilter: flowtable: use dst in this direction when pushing IPIP header netfilter: ipset: allocate the proper memory for the generic hash structure netfilter: ipset: cleanup the add/del backlog when resize failed netfilter: ipset: exclude gc when resize is in progress netfilter: ipset: mark the rcu locked areas properly netfilter: nft_lookup: fix catchall element handling with inverted lookups netfilter: ebtables: module names must be null-terminated netfilter: ebtables: zero chainstack array netfilter: ebtables: terminate table name before find_table_lock() netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag ==================== Link: https://patch.msgid.link/20260708140309.19633-1-fw@strlen.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
 Dexuan Cui
|
c72a0f09c5 |
net: mana: Sync page pool RX frags for CPU
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack.
Fixes:
|
||
|
Yizhou Zhao
|
bae7ce7baf |
ipvs: pass parsed transport offset to state handlers
IPVS callers already parse the packet into struct ip_vs_iphdr before updating connection state. For IPv6 this records the real transport-header offset after extension headers in iph.len. Pass this parsed transport offset through ip_vs_set_state() and the protocol state_transition() callback so protocol handlers can use the same packet context as scheduling and NAT handling. This patch only changes the common callback plumbing and adapts the protocol callback signatures; TCP and SCTP start using the value in follow-up patches. Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de> |
||
|
Pablo Neira Ayuso
|
fa7395c02d |
netfilter: flowtable: support IPIP tunnel with direct xmit
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>.
Fixes:
|
||
|
Pablo Neira Ayuso
|
6c5dcab95f |
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the hardware offload for this scenario. This patch adds a stub that can be enhanced to add more configuration that are currently not supported. As of now, the offload work is enqueued to the worker, then ignored if the hardware offload configuration is not supported. Check the NF_FLOW_HW flag to know if this entry was already tried once to be offloaded so this is not retried on refresh when unsupported. Move NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag is unset the _del and _stats variants are never called. This can be updated later on to skip hardware offload work to be queued in case hardware offload does not support it. Fixes: |
||
 Eric Dumazet
|
9b26518b68 |
ipv6: mcast: Fix potential UAF in MLD delayed work
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Fixes:
|
||
 Cen Zhang
|
0c2ed186bb |
wifi: cfg80211: use wiphy work for socket owner autodisconnect
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev.
Fixes:
|
||
|
Pauli Virtanen
|
fd076d8dee |
Bluetooth: ISO: exclude RFU bits from ISO_SDU_Length
slen contains ISO_SDU_Length (12 bits), RFU (2 bits),
Packet_Status_Flags (2 bits).
Exclude the RFU bits from hci_iso_data_len. Also add masks to the pack
macro.
Fixes:
|
||
 Siwei Zhang
|
6fef032af0 |
Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()
l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.
Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.
Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied.
Fixes:
|
||
|
Siwei Zhang
|
12917f591c |
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free.
Fixes:
|
||
 Peddolla Harshavardhan Reddy
|
2b0eab425e |
wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
When a netlink socket that owns a PMSR session is closed,
cfg80211_release_pmsr() clears the request's nl_portid and queues
pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously.
If the interface tears down concurrently, cfg80211_pmsr_wdev_down()
is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk)
to wait for any running work. The work function acquires wiphy_lock
via guard(wiphy) before calling process_abort.
This is a deadlock: wdev_down holds wiphy_lock and blocks inside
cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same
wiphy_lock. Neither thread can proceed.
The same deadlock is reachable from cfg80211_leave_locked(), which
calls cfg80211_pmsr_wdev_down() for all interface types under
wiphy_lock.
Fix this by converting pmsr_free_wk from a plain work_struct to a
wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running
work items, so the explicit guard(wiphy) in the work function is no
longer needed. wiphy_work_cancel() can be called safely while holding
wiphy_lock - since wiphy_lock prevents the work from running
concurrently, wiphy_work_cancel() never blocks, eliminating the
deadlock.
Remove the cancel_work_sync() for pmsr_free_wk from the
NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally
just before it, already cancels any pending work under wiphy_lock
via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down().
Fixes:
|
||
|
Jamal Hadi Salim
|
8b519cbcab |
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity.
Fixes:
|
||
 Qihang
|
d335dcc6f5 |
gue: validate REMCSUM private option length
GUE private flags can indicate that remote checksum offload metadata is
present. The private flags field itself is accounted for by
guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even
when GUE_PFLAG_REMCSUM is set.
This lets a packet with only the private flags field pass
validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum()
read the missing REMCSUM start/offset fields from the following bytes.
Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that
malformed packets are rejected during option validation.
Fixes:
|
||
|
Cen Zhang
|
c4a5f0071c |
xfrm: cache the offload ifindex for netlink dumps
copy_to_user_state_extra() only holds a reference to the outer xfrm_state.
That does not pin x->xso.dev. NETDEV_DOWN and NETDEV_UNREGISTER can race
through xfrm_dev_state_flush(), xfrm_state_delete(), and
xfrm_dev_state_free(), which clears xso->dev and drops the netdev
reference before the GETSA dump reaches xso_to_xuo() and reads
xso->dev->ifindex.
The buggy scenario involves two paths, with each column showing the order
within that path:
XFRM_MSG_GETSA dump path: NETDEV teardown path:
1. xfrm_get_sa() gets xfrm_state 1. xfrm_dev_state_flush() finds x
2. copy_to_user_state_extra() sees 2. xfrm_state_delete() removes x
x->xso.dev from the SAD
3. copy_user_offload() calls 3. xfrm_dev_state_free() clears
xso_to_xuo() xso->dev
4. xso->dev->ifindex dereferences 4. netdev_put() drops the device
a detached net_device reference
Avoid following the live net_device from the dump paths. Cache the
attached ifindex in xfrm_dev_offload when state or policy offload is bound
to a device, and serialize that snapshot instead. This preserves the
user-visible XFRMA_OFFLOAD_DEV value without depending on the embedded
net_device lifetime.
Validation reproduced this kernel report:
Oops: general protection fault
Call Trace:
<TASK>
copy_to_user_state_extra+0xb8d/0x1370 [xfrm_user]
? __pfx_copy_to_user_state_extra+0x10/0x10 [xfrm_user]
? __asan_memset+0x23/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? __alloc_skb+0x342/0x960
? srso_alias_return_thunk+0x5/0xfbef5
? __asan_memset+0x23/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? __nlmsg_put+0x147/0x1b0
dump_one_state+0x1c7/0x3e0 [xfrm_user]
xfrm_state_netlink+0xcb/0x130 [xfrm_user]
? __pfx_xfrm_state_netlink+0x10/0x10 [xfrm_user]
? srso_alias_return_thunk+0x5/0xfbef5
? xfrm_user_state_lookup.constprop.0+0x230/0x310 [xfrm_user]
xfrm_get_sa+0x102/0x250 [xfrm_user]
? __pfx_xfrm_get_sa+0x10/0x10 [xfrm_user]
xfrm_user_rcv_msg+0x504/0xaa0 [xfrm_user]
? __pfx_xfrm_user_rcv_msg+0x10/0x10 [xfrm_user]
? srso_alias_return_thunk+0x5/0xfbef5
? stack_trace_save+0x8e/0xc0
? __pfx_stack_trace_save+0x10/0x10
netlink_rcv_skb+0x11f/0x350
? __pfx_xfrm_user_rcv_msg+0x10/0x10 [xfrm_user]
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_mutex_lock+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
xfrm_netlink_rcv+0x65/0x80 [xfrm_user]
netlink_unicast+0x600/0x870
? __pfx_netlink_unicast+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_stack_trace_save+0x10/0x10
netlink_sendmsg+0x75d/0xc10
? __pfx_netlink_sendmsg+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
____sys_sendmsg+0x77a/0x900
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
? release_sock+0x1a/0x1d0
? srso_alias_return_thunk+0x5/0xfbef5
? netlink_insert+0x143/0xec0
___sys_sendmsg+0xff/0x180
? __pfx____sys_sendmsg+0x10/0x10
? _raw_spin_lock_irqsave+0x85/0xe0
? do_getsockname+0xf9/0x170
? srso_alias_return_thunk+0x5/0xfbef5
? fdget+0x53/0x3b0
__sys_sendmsg+0x111/0x1a0
? __pfx___sys_sendmsg+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __sys_getsockname+0x8c/0x100
do_syscall_64+0x102/0x5a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes:
|