linux-stable-mirror/Documentation/networking/netdevices.rst

.. SPDX-License-Identifier: GPL-2.0

=====================================
Network Devices, the Kernel, and You!
=====================================


Introduction
============
The following is a random collection of documentation regarding
network devices. It is intended for driver developers.

struct net_device lifetime rules
================================
Network device structures need to persist even after module is unloaded and
must be allocated with alloc_netdev_mqs() and friends.
If device has registered successfully, it will be freed on last use
by free_netdev(). This is required to handle the pathological case cleanly
(example: ``rmmod mydriver </sys/class/net/myeth/mtu``)

alloc_netdev_mqs() / alloc_netdev() reserve extra space for driver
private data which gets freed when the network device is freed. If
separately allocated data is attached to the network device
(extra pointers stored in the device private struct) then it is up
to the module exit handler to free that.

There are two groups of APIs for registering struct net_device.
First group can be used in normal contexts where ``rtnl_lock`` is not already
held: register_netdev(), unregister_netdev().
Second group can be used when ``rtnl_lock`` is already held:
register_netdevice(), unregister_netdevice(), free_netdev().

Simple drivers
--------------

Most drivers (especially device drivers) handle lifetime of struct net_device
in context where ``rtnl_lock`` is not held (e.g. driver probe and remove paths).

In that case the struct net_device registration is done using
the register_netdev(), and unregister_netdev() functions:

.. code-block:: c

  int probe()
  {
    struct my_device_priv *priv;
    int err;

    dev = alloc_netdev_mqs(...);
    if (!dev)
      return -ENOMEM;
    priv = netdev_priv(dev);

    /* ... do all device setup before calling register_netdev() ...
     */

    err = register_netdev(dev);
    if (err)
      goto err_undo;

    /* net_device is visible to the user! */
    return 0;

  err_undo:
    /* ... undo the device setup ... */
    free_netdev(dev);
    return err;
  }

  void remove()
  {
    unregister_netdev(dev);
    free_netdev(dev);
  }

Note that after calling register_netdev() the device is visible in the system.
Users can open it and start sending / receiving traffic immediately,
or run any other callback, so all initialization must be **complete** prior to
registration.

unregister_netdev() closes the device and waits for all users to be done
with it. The memory of struct net_device itself may still be referenced
by sysfs but all operations on that device will fail.

free_netdev() can be called after unregister_netdev() returns or when
register_netdev() failed.

Device management under RTNL
----------------------------

Registering struct net_device while in context which already holds
the ``rtnl_lock`` requires extra care. In those scenarios most drivers
will want to make use of struct net_device's ``needs_free_netdev``
and ``priv_destructor`` members for freeing of state.

Example flow of netdev handling under ``rtnl_lock``:

.. code-block:: c

  static void my_setup(struct net_device *dev)
  {
    dev->needs_free_netdev = true;
  }

  static void my_destructor(struct net_device *dev)
  {
    some_obj_destroy(priv->obj);
    some_uninit(priv);
  }

  int create_link()
  {
    struct my_device_priv *priv;
    int err;

    ASSERT_RTNL();

    dev = alloc_netdev(sizeof(*priv), "net%d", NET_NAME_UNKNOWN, my_setup);
    if (!dev)
      return -ENOMEM;
    priv = netdev_priv(dev);

    /* Implicit constructor */
    err = some_init(priv);
    if (err)
      goto err_free_dev;

    priv->obj = some_obj_create();
    if (!priv->obj) {
      err = -ENOMEM;
      goto err_some_uninit;
    }
    /* End of constructor, set the destructor: */
    dev->priv_destructor = my_destructor;

    err = register_netdevice(dev);
    if (err)
      /* register_netdevice() calls destructor on failure */
      goto err_free_dev;

    /* If anything fails now unregister_netdevice() (or unregister_netdev())
     * will take care of calling my_destructor and free_netdev().
     */

    return 0;

  err_some_uninit:
    some_uninit(priv);
  err_free_dev:
    free_netdev(dev);
    return err;
  }

If struct net_device.priv_destructor is set it will be called by the core
some time after unregister_netdevice(), it will also be called if
register_netdevice() fails. The callback may be invoked with or without
``rtnl_lock`` held.

There is no explicit constructor callback, driver "constructs" the private
netdev state after allocating it and before registration.

Setting struct net_device.needs_free_netdev makes core call free_netdev()
automatically after unregister_netdevice() when all references to the device
are gone. It only takes effect after a successful call to register_netdevice()
so if register_netdevice() fails driver is responsible for calling
free_netdev().

free_netdev() is safe to call on error paths right after unregister_netdevice()
or when register_netdevice() fails. Parts of netdev (de)registration process
happen after ``rtnl_lock`` is released, therefore in those cases free_netdev()
will defer some of the processing until ``rtnl_lock`` is released.

Devices spawned from struct rtnl_link_ops should never free the
struct net_device directly.

.ndo_init and .ndo_uninit
~~~~~~~~~~~~~~~~~~~~~~~~~

``.ndo_init`` and ``.ndo_uninit`` callbacks are called during net_device
registration and de-registration, under ``rtnl_lock``. Drivers can use
those e.g. when parts of their init process need to run under ``rtnl_lock``.

``.ndo_init`` runs before device is visible in the system, ``.ndo_uninit``
runs during de-registering after device is closed but other subsystems
may still have outstanding references to the netdevice.

MTU
===
Each network device has a Maximum Transfer Unit. The MTU does not
include any link layer protocol overhead. Upper layer protocols must
not pass a socket buffer (skb) to a device to transmit with more data
than the mtu. The MTU does not include link layer header overhead, so
for example on Ethernet if the standard MTU is 1500 bytes used, the
actual skb will contain up to 1514 bytes because of the Ethernet
header. Devices should allow for the 4 byte VLAN header as well.

Segmentation Offload (GSO, TSO) is an exception to this rule.  The
upper layer protocol may pass a large socket buffer to the device
transmit routine, and the device will break that up into separate
packets based on the current MTU.

MTU is symmetrical and applies both to receive and transmit. A device
must be able to receive at least the maximum size packet allowed by
the MTU. A network device may use the MTU as mechanism to size receive
buffers, but the device should allow packets with VLAN header. With
standard Ethernet mtu of 1500 bytes, the device should allow up to
1518 byte packets (1500 + 14 header + 4 tag).  The device may either:
drop, truncate, or pass up oversize packets, but dropping oversize
packets is preferred.


struct net_device synchronization rules
=======================================
ndo_open:
	Synchronization: rtnl_lock() semaphore. In addition, netdev instance
	lock if the driver implements queue management or shaper API.
	Context: process

ndo_stop:
	Synchronization: rtnl_lock() semaphore. In addition, netdev instance
	lock if the driver implements queue management or shaper API.
	Context: process
	Note: netif_running() is guaranteed false

ndo_do_ioctl:
	Synchronization: rtnl_lock() semaphore.

	This is only called by network subsystems internally,
	not by user space calling ioctl as it was in before
	linux-5.14.

ndo_siocbond:
	Synchronization: rtnl_lock() semaphore. In addition, netdev instance
	lock if the driver implements queue management or shaper API.
        Context: process

	Used by the bonding driver for the SIOCBOND family of
	ioctl commands.

ndo_siocwandev:
	Synchronization: rtnl_lock() semaphore. In addition, netdev instance
	lock if the driver implements queue management or shaper API.
	Context: process

	Used by the drivers/net/wan framework to handle
	the SIOCWANDEV ioctl with the if_settings structure.

ndo_siocdevprivate:
	Synchronization: rtnl_lock() semaphore. In addition, netdev instance
	lock if the driver implements queue management or shaper API.
	Context: process

	This is used to implement SIOCDEVPRIVATE ioctl helpers.
	These should not be added to new drivers, so don't use.

ndo_eth_ioctl:
	Synchronization: rtnl_lock() semaphore. In addition, netdev instance
	lock if the driver implements queue management or shaper API.
	Context: process

ndo_get_stats / ndo_get_stats64:
	Synchronization: RCU (can be called concurrently with the stats
	update path).
	Context: atomic (can't sleep under RCU)

ndo_start_xmit:
	Synchronization: __netif_tx_lock spinlock.

	When the driver sets dev->lltx this will be called without holding
	netif_tx_lock. dev->lltx is meant for software drivers only, since
	they often have no per-queue state.

	Context: Process with BHs disabled or BH (timer),
		 will be called with interrupts disabled by netconsole.

	Return codes:

	* NETDEV_TX_OK everything ok.
	* NETDEV_TX_BUSY Cannot transmit packet, try later
	  Usually a bug, means queue start/stop flow control is broken in
	  the driver. Note: the driver must NOT put the skb in its DMA ring.

ndo_tx_timeout:
	Synchronization: netif_tx_lock spinlock; all TX queues frozen.
	Context: BHs disabled
	Notes: netif_queue_stopped() is guaranteed true

ndo_set_rx_mode:
	Synchronization: netif_addr_lock spinlock.
	Context: BHs disabled
	Notes: Deprecated in favor of ndo_set_rx_mode_async which runs
	in process context.

ndo_set_rx_mode_async:
	Synchronization: rtnl_lock() semaphore. In addition, netdev instance
	lock if the driver implements queue management or shaper API.
	Context: process (from a work queue)
	Notes: Async version of ndo_set_rx_mode which runs in process
	context. Receives snapshots of the unicast and multicast address lists.

ndo_change_rx_flags:
	Synchronization: rtnl_lock() semaphore. In addition, netdev instance
	lock if the driver implements queue management or shaper API.

ndo_setup_tc:
	Locking depends on ``tc_setup_type``. For most types the callback
	is invoked under ``rtnl_lock`` and netdev instance lock if the driver
	implements queue management or shaper API.

	For ``TC_SETUP_BLOCK`` and ``TC_SETUP_FT`` ``rtnl_lock`` may or
	may not be held, and the netdev instance lock is not held.
	``TC_SETUP_BLOCK`` runs under ``block->cb_lock`` and ``TC_SETUP_FT``
	runs under ``flowtable->flow_block_lock``.

Most ndo callbacks not specified in the list above are running
under ``rtnl_lock``. In addition, netdev instance lock is taken as well if
the driver implements queue management or shaper API.

struct napi_struct synchronization rules
========================================
napi->poll:
	Synchronization:
		NAPI_STATE_SCHED bit in napi->state.  Device
		driver's ndo_stop method will invoke napi_disable() on
		all NAPI instances which will do a sleeping poll on the
		NAPI_STATE_SCHED napi->state bit, waiting for all pending
		NAPI activity to cease.

	Context:
		 softirq
		 will be called with interrupts disabled by netconsole.

netdev instance lock
====================

Historically, all networking control operations were protected by a single
global lock known as ``rtnl_lock``. There is an ongoing effort to replace this
global lock with separate locks for each network namespace. Additionally,
properties of individual netdev are increasingly protected by per-netdev locks.

For device drivers that implement shaping or queue management APIs, all control
operations will be performed under the netdev instance lock.
Drivers can also explicitly request instance lock to be held during ops
by setting ``request_ops_lock`` to true. Code comments and docs refer
to drivers which have ops called under the instance lock as "ops locked".
See also the documentation of the ``lock`` member of struct net_device.

There is also a case of taking two per-netdev locks in sequence when netdev
queues are leased, that is, the netdev-scope lock is taken for both the
virtual and the physical device. To prevent deadlocks, the virtual device's
lock must always be acquired before the physical device's (see
``netdev_nl_queue_create_doit``).

Device drivers are encouraged to rely on the instance lock where possible.

For the (mostly software) drivers that need to interact with the core stack,
there are two sets of interfaces: ``dev_xxx``/``netdev_xxx`` and ``netif_xxx``
(e.g., ``dev_set_mtu`` and ``netif_set_mtu``). The ``dev_xxx``/``netdev_xxx``
functions handle acquiring the instance lock themselves, while the
``netif_xxx`` functions assume that the driver has already acquired
the instance lock.

struct net_device_ops
---------------------

``ndos`` are called without holding the instance lock for most drivers.

"Ops locked" drivers will have most of the ``ndos`` invoked under
the instance lock.

struct ethtool_ops
------------------

For non-"ops locked" drivers ethtool_ops are executed under ``rtnl_lock``.

For "ops locked" drivers, ``ethtool_ops``, unlike ``ndos``, run under
the instance lock **only**. Drivers may request that ``rtnl_lock``
is held around specific operations (both SET and GET) by setting
appropriate bits in ``ethtool_ops::op_needs_rtnl`` (if the necessary
``ETHTOOL_OP_NEEDS_RTNL_*`` bit doesn't exist, just add it).
Commonly used core helpers which force drivers to selectively opt-in to
``rtnl_lock`` protection include ``netdev_update_features()``,
``netif_set_real_num_tx_queues()``, and phylink helpers.

struct netdev_stat_ops
----------------------

"qstat" ops are invoked under the instance lock for "ops locked" drivers,
and under rtnl_lock for all other drivers.

struct net_shaper_ops
---------------------

All net shaper callbacks are invoked while holding the netdev instance
lock. ``rtnl_lock`` may or may not be held.

Note that supporting net shapers automatically enables "ops locking".

struct netdev_queue_mgmt_ops
----------------------------

All queue management callbacks are invoked while holding the netdev instance
lock. ``rtnl_lock`` may or may not be held.

Note that supporting struct netdev_queue_mgmt_ops automatically enables
"ops locking".

Notifiers and netdev instance lock
----------------------------------

For device drivers that implement shaping or queue management APIs,
some of the notifiers (``enum netdev_cmd``) are running under the netdev
instance lock.

The following netdev notifiers are always run under the instance lock:
* ``NETDEV_XDP_FEAT_CHANGE``

For devices with locked ops, currently only the following notifiers are
running under the lock:
* ``NETDEV_CHANGE``
* ``NETDEV_CHANGENAME``
* ``NETDEV_REGISTER``
* ``NETDEV_UP``

The following notifiers are running without the lock:
* ``NETDEV_UNREGISTER``

There are no clear expectations for the remaining notifiers. Notifiers not on
the list may run with or without the instance lock, potentially even invoking
the same notifier type with and without the lock from different code paths.
The goal is to eventually ensure that all (or most, with a few documented
exceptions) notifiers run under the instance lock. Please extend this
documentation whenever you make explicit assumption about lock being held
from a notifier.

Drivers **must not** generate nested notifications of the ops-locked types.

NETDEV_INTERNAL symbol namespace
================================

Symbols exported as NETDEV_INTERNAL can only be used in networking
core and drivers which exclusively flow via the main networking list and trees.
Note that the inverse is not true, most symbols outside of NETDEV_INTERNAL
are not expected to be used by random code outside netdev either.
Symbols may lack the designation because they predate the namespaces,
or simply due to an oversight.