Files
linux-stable-mirror/drivers/acpi/acpi_apd.c
T
Linus Torvalds c41cfae42c Merge tag 'spi-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
 "This has been quite a busy release, mainly due to the subsystem wide
  work Johan Hovold has done to modernise resource allocation for the
  subsystem on probe, the subsystem did some very clever allocation
  management pre devm which didn't quite mesh comfortably with managed
  allocations and made it far too easy to introduce error handling and
  removal bugs.

   - Cleanup and simplification of controller struct allocation, moving
     everything over to devm and making the devm APIs more robust, from
     Johan Hovold

   - Support for spi-mem devices that don't assert chip select and
     support for a secondary read command for memory mapped flashes,
     some commits for this are shared with mtd.

   - Support for SpacemiT K1"

* tag 'spi-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (118 commits)
  spi: Fix mismatched DT property access types
  spi: xilinx: use FIFO occupancy register to determine buffer size
  spi: spi-mem: Fix spi_controller_mem_ops kdoc
  spi: xilinx: let transfers timeout in case of no IRQ
  spi: dt-bindings: nuvoton,npcm750-fiu: Convert to DT schema
  spi: meson-spifc: fix runtime PM leak on remove
  spi: Use named initializers for platform_device_id arrays
  spi: rzv2h-rspi: Add suspend/resume support
  spi: dw-pci: remove redundant pci_free_irq_vectors() calls
  spi: ep93xx: fix double-free of zeropage on DMA setup failure
  spi: cadence-xspi: Revert COMPILE_TEST support
  spi: cadence-xspi: Support 32bit and 64bit slave dma interface
  spi: tegra210-quad: Allocate DMA memory for DMA engine
  spi: imx: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
  spi: fsl-lpspi: terminate the RX channel on TX prepare failure path
  spi: fsl-lpspi: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
  spi: atmel: fix DMA channel and bounce buffer leaks
  spi: omap2-mcspi: Use of_device_get_match_data()
  spi: Use named initializers for arrays of i2c_device_data
  spi: aspeed: Replace VLA parameter with flat pointer in calibration helper
  ...
2026-06-16 07:56:47 +05:30

281 lines
6.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* AMD ACPI support for ACPI2platform device.
*
* Copyright (c) 2014,2015 AMD Corporation.
* Authors: Ken Xue <Ken.Xue@amd.com>
* Wu, Jeff <Jeff.Wu@amd.com>
*/
#include <linux/acpi.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_data/clk-fch.h>
#include <linux/platform_device.h>
#include "internal.h"
struct apd_private_data;
/**
* struct apd_device_desc - a descriptor for apd device
* @fixed_clk_rate: fixed rate input clock source for acpi device;
* 0 means no fixed rate input clock source
* @properties: build-in properties of the device such as UART
* @setup: a hook routine to set device resource during create platform device
*
* Device description defined as acpi_device_id.driver_data
*/
struct apd_device_desc {
unsigned int fixed_clk_rate;
struct property_entry *properties;
int (*setup)(struct apd_private_data *pdata);
};
struct apd_private_data {
struct clk *clk;
struct acpi_device *adev;
const struct apd_device_desc *dev_desc;
};
#if defined(CONFIG_X86_AMD_PLATFORM_DEVICE) || defined(CONFIG_ARM64)
#define APD_ADDR(desc) ((unsigned long)&desc)
static int acpi_apd_setup(struct apd_private_data *pdata)
{
const struct apd_device_desc *dev_desc = pdata->dev_desc;
struct clk *clk;
if (dev_desc->fixed_clk_rate) {
clk = clk_register_fixed_rate(&pdata->adev->dev,
dev_name(&pdata->adev->dev),
NULL, 0, dev_desc->fixed_clk_rate);
clk_register_clkdev(clk, NULL, dev_name(&pdata->adev->dev));
pdata->clk = clk;
}
return 0;
}
#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
static int fch_misc_setup(struct apd_private_data *pdata)
{
struct acpi_device *adev = pdata->adev;
const union acpi_object *obj;
struct platform_device *clkdev;
struct fch_clk_data *clk_data;
struct resource_entry *rentry;
struct list_head resource_list;
int ret;
clk_data = devm_kzalloc(&adev->dev, sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
return -ENOMEM;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_memory_resources(adev, &resource_list);
if (ret < 0)
return -ENOENT;
if (!acpi_dev_get_property(adev, "clk-name", ACPI_TYPE_STRING, &obj)) {
clk_data->name = devm_kzalloc(&adev->dev, obj->string.length,
GFP_KERNEL);
if (!clk_data->name)
return -ENOMEM;
strscpy(clk_data->name, obj->string.pointer, obj->string.length);
} else {
/* Set default name to mclk if entry missing in firmware */
clk_data->name = "mclk";
}
list_for_each_entry(rentry, &resource_list, node) {
clk_data->base = devm_ioremap(&adev->dev, rentry->res->start,
resource_size(rentry->res));
break;
}
if (!clk_data->base)
return -ENOMEM;
acpi_dev_free_resource_list(&resource_list);
clkdev = platform_device_register_data(&adev->dev, "clk-fch",
PLATFORM_DEVID_NONE, clk_data,
sizeof(*clk_data));
return PTR_ERR_OR_ZERO(clkdev);
}
static const struct apd_device_desc cz_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 133000000,
};
static const struct apd_device_desc wt_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 150000000,
};
static const struct apd_device_desc wt_i3c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 125000000,
};
static struct property_entry uart_properties[] = {
PROPERTY_ENTRY_U32("reg-io-width", 4),
PROPERTY_ENTRY_U32("reg-shift", 2),
PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
{ },
};
static const struct apd_device_desc cz_uart_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 48000000,
.properties = uart_properties,
};
static const struct apd_device_desc fch_misc_desc = {
.setup = fch_misc_setup,
};
#endif /* CONFIG_X86_AMD_PLATFORM_DEVICE */
#ifdef CONFIG_ARM64
static const struct apd_device_desc xgene_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 100000000,
};
static const struct apd_device_desc vulcan_spi_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 133000000,
};
static const struct apd_device_desc hip07_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 200000000,
};
static const struct apd_device_desc hip08_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 250000000,
};
static const struct apd_device_desc hip08_lite_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 125000000,
};
static const struct apd_device_desc thunderx2_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 125000000,
};
static const struct apd_device_desc nxp_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 350000000,
};
static const struct apd_device_desc hip08_spi_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 250000000,
};
static const struct apd_device_desc leca_spi_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 400000000,
};
static const struct apd_device_desc leca_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 250000000,
};
#endif /* CONFIG_ARM64 */
#endif
/*
* Create platform device during acpi scan attach handle.
* Return value > 0 on success of creating device.
*/
static int acpi_apd_create_device(struct acpi_device *adev,
const struct acpi_device_id *id)
{
const struct apd_device_desc *dev_desc = (void *)id->driver_data;
struct apd_private_data *pdata;
struct platform_device *pdev;
int ret;
if (!dev_desc) {
pdev = acpi_create_platform_device(adev, NULL);
return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
}
pdata = kzalloc_obj(*pdata);
if (!pdata)
return -ENOMEM;
pdata->adev = adev;
pdata->dev_desc = dev_desc;
if (dev_desc->setup) {
ret = dev_desc->setup(pdata);
if (ret)
goto err_out;
}
adev->driver_data = pdata;
pdev = acpi_create_platform_device(adev, dev_desc->properties);
if (!IS_ERR_OR_NULL(pdev))
return 1;
ret = PTR_ERR(pdev);
adev->driver_data = NULL;
err_out:
kfree(pdata);
return ret;
}
static const struct acpi_device_id acpi_apd_device_ids[] = {
/* Generic apd devices */
#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
{ "AMD0010", APD_ADDR(cz_i2c_desc) },
{ "AMD0020", APD_ADDR(cz_uart_desc) },
{ "AMD0030", },
{ "AMD0040", APD_ADDR(fch_misc_desc)},
{ "AMDI0010", APD_ADDR(wt_i2c_desc) },
{ "AMDI0015", APD_ADDR(wt_i3c_desc) },
{ "AMDI0019", APD_ADDR(wt_i2c_desc) },
{ "AMDI0020", APD_ADDR(cz_uart_desc) },
{ "AMDI0022", APD_ADDR(cz_uart_desc) },
{ "HYGO0010", APD_ADDR(wt_i2c_desc) },
#endif
#ifdef CONFIG_ARM64
{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
{ "BRCM900D", APD_ADDR(vulcan_spi_desc) },
{ "CAV900D", APD_ADDR(vulcan_spi_desc) },
{ "CAV9007", APD_ADDR(thunderx2_i2c_desc) },
{ "HISI02A1", APD_ADDR(hip07_i2c_desc) },
{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
{ "HISI02A3", APD_ADDR(hip08_lite_i2c_desc) },
{ "HISI0173", APD_ADDR(hip08_spi_desc) },
{ "LECA0002", APD_ADDR(leca_spi_desc) },
{ "LECA0003", APD_ADDR(leca_i2c_desc) },
{ "NXP0001", APD_ADDR(nxp_i2c_desc) },
#endif
{ }
};
static struct acpi_scan_handler apd_handler = {
.ids = acpi_apd_device_ids,
.attach = acpi_apd_create_device,
};
void __init acpi_apd_init(void)
{
acpi_scan_add_handler(&apd_handler);
}