mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-08-09 06:14:34 +02:00
The KMS framework uses two slightly different definitions for the state concept. For a given object (plane, CRTC, encoder, etc., so drm_$OBJECT_state), the state is the entire state of that object. However, at the device level, drm_atomic_state refers to a state update for a limited number of objects. Thus, drm_atomic_state isn't the entire device state, but only the full state of some objects in that device. This has been an endless source of confusion and thus bugs. We can rename the drm_atomic_state structure to drm_atomic_commit to make it less confusing. This patch was created using: rg -l drm_atomic_state | \ xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g' mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c Acked-by: Simona Vetter <simona.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
566 lines
16 KiB
C
566 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* DRM driver for MIPI DBI compatible display panels
|
|
*
|
|
* Copyright 2022 Noralf Trønnes
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <drm/clients/drm_client_setup.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_drv.h>
|
|
#include <drm/drm_fbdev_dma.h>
|
|
#include <drm/drm_gem_atomic_helper.h>
|
|
#include <drm/drm_gem_dma_helper.h>
|
|
#include <drm/drm_managed.h>
|
|
#include <drm/drm_mipi_dbi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_modeset_helper.h>
|
|
#include <drm/drm_print.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
struct panel_mipi_dbi_format {
|
|
const char *name;
|
|
u32 fourcc;
|
|
unsigned int bpp;
|
|
};
|
|
|
|
static const struct panel_mipi_dbi_format panel_mipi_dbi_formats[] = {
|
|
{ "r5g6b5", DRM_FORMAT_RGB565, 16 },
|
|
{ "b6x2g6x2r6x2", DRM_FORMAT_RGB888, 24 },
|
|
};
|
|
|
|
static int panel_mipi_dbi_get_format(struct device *dev, u32 *formats, unsigned int *bpp)
|
|
{
|
|
const char *format_name;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
formats[1] = DRM_FORMAT_XRGB8888;
|
|
|
|
ret = device_property_read_string(dev, "format", &format_name);
|
|
if (ret) {
|
|
/* Old Device Trees don't have this property */
|
|
formats[0] = DRM_FORMAT_RGB565;
|
|
*bpp = 16;
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(panel_mipi_dbi_formats); i++) {
|
|
const struct panel_mipi_dbi_format *format = &panel_mipi_dbi_formats[i];
|
|
|
|
if (strcmp(format_name, format->name))
|
|
continue;
|
|
|
|
formats[0] = format->fourcc;
|
|
*bpp = format->bpp;
|
|
return 0;
|
|
}
|
|
|
|
dev_err(dev, "Pixel format is not supported: '%s'\n", format_name);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const u8 panel_mipi_dbi_magic[15] = { 'M', 'I', 'P', 'I', ' ', 'D', 'B', 'I',
|
|
0, 0, 0, 0, 0, 0, 0 };
|
|
|
|
/*
|
|
* The display controller configuration is stored in a firmware file.
|
|
* The Device Tree 'compatible' property value with a '.bin' suffix is passed
|
|
* to request_firmware() to fetch this file.
|
|
*/
|
|
struct panel_mipi_dbi_config {
|
|
/* Magic string: panel_mipi_dbi_magic */
|
|
u8 magic[15];
|
|
|
|
/* Config file format version */
|
|
u8 file_format_version;
|
|
|
|
/*
|
|
* MIPI commands to execute when the display pipeline is enabled.
|
|
* This is used to configure the display controller.
|
|
*
|
|
* The commands are stored in a byte array with the format:
|
|
* command, num_parameters, [ parameter, ...], command, ...
|
|
*
|
|
* Some commands require a pause before the next command can be received.
|
|
* Inserting a delay in the command sequence is done by using the NOP command with one
|
|
* parameter: delay in miliseconds (the No Operation command is part of the MIPI Display
|
|
* Command Set where it has no parameters).
|
|
*
|
|
* Example:
|
|
* command 0x11
|
|
* sleep 120ms
|
|
* command 0xb1 parameters 0x01, 0x2c, 0x2d
|
|
* command 0x29
|
|
*
|
|
* Byte sequence:
|
|
* 0x11 0x00
|
|
* 0x00 0x01 0x78
|
|
* 0xb1 0x03 0x01 0x2c 0x2d
|
|
* 0x29 0x00
|
|
*/
|
|
u8 commands[];
|
|
};
|
|
|
|
struct panel_mipi_dbi_commands {
|
|
const u8 *buf;
|
|
size_t len;
|
|
};
|
|
|
|
static struct panel_mipi_dbi_commands *
|
|
panel_mipi_dbi_check_commands(struct device *dev, const struct firmware *fw)
|
|
{
|
|
const struct panel_mipi_dbi_config *config = (struct panel_mipi_dbi_config *)fw->data;
|
|
struct panel_mipi_dbi_commands *commands;
|
|
size_t size = fw->size, commands_len;
|
|
unsigned int i = 0;
|
|
|
|
if (size < sizeof(*config) + 2) { /* At least 1 command */
|
|
dev_err(dev, "config: file size=%zu is too small\n", size);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
if (memcmp(config->magic, panel_mipi_dbi_magic, sizeof(config->magic))) {
|
|
dev_err(dev, "config: Bad magic: %15ph\n", config->magic);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
if (config->file_format_version != 1) {
|
|
dev_err(dev, "config: version=%u is not supported\n", config->file_format_version);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
drm_dev_dbg(dev, DRM_UT_DRIVER, "size=%zu version=%u\n", size, config->file_format_version);
|
|
|
|
commands_len = size - sizeof(*config);
|
|
|
|
while ((i + 1) < commands_len) {
|
|
u8 command = config->commands[i++];
|
|
u8 num_parameters = config->commands[i++];
|
|
const u8 *parameters = &config->commands[i];
|
|
|
|
i += num_parameters;
|
|
if (i > commands_len) {
|
|
dev_err(dev, "config: command=0x%02x num_parameters=%u overflows\n",
|
|
command, num_parameters);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
if (command == 0x00 && num_parameters == 1)
|
|
drm_dev_dbg(dev, DRM_UT_DRIVER, "sleep %ums\n", parameters[0]);
|
|
else
|
|
drm_dev_dbg(dev, DRM_UT_DRIVER, "command %02x %*ph\n",
|
|
command, num_parameters, parameters);
|
|
}
|
|
|
|
if (i != commands_len) {
|
|
dev_err(dev, "config: malformed command array\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
commands = devm_kzalloc(dev, sizeof(*commands), GFP_KERNEL);
|
|
if (!commands)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
commands->len = commands_len;
|
|
commands->buf = devm_kmemdup(dev, config->commands, commands->len, GFP_KERNEL);
|
|
if (!commands->buf)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
return commands;
|
|
}
|
|
|
|
static struct panel_mipi_dbi_commands *panel_mipi_dbi_commands_from_fw(struct device *dev)
|
|
{
|
|
struct panel_mipi_dbi_commands *commands;
|
|
const struct firmware *fw;
|
|
const char *compatible;
|
|
char fw_name[40];
|
|
int ret;
|
|
|
|
ret = of_property_read_string_index(dev->of_node, "compatible", 0, &compatible);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
snprintf(fw_name, sizeof(fw_name), "%s.bin", compatible);
|
|
ret = request_firmware(&fw, fw_name, dev);
|
|
if (ret) {
|
|
dev_err(dev, "No config file found for compatible '%s' (error=%d)\n",
|
|
compatible, ret);
|
|
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
commands = panel_mipi_dbi_check_commands(dev, fw);
|
|
release_firmware(fw);
|
|
|
|
return commands;
|
|
}
|
|
|
|
static void panel_mipi_dbi_commands_execute(struct mipi_dbi *dbi,
|
|
struct panel_mipi_dbi_commands *commands)
|
|
{
|
|
unsigned int i = 0;
|
|
|
|
if (!commands)
|
|
return;
|
|
|
|
while (i < commands->len) {
|
|
u8 command = commands->buf[i++];
|
|
u8 num_parameters = commands->buf[i++];
|
|
const u8 *parameters = &commands->buf[i];
|
|
|
|
if (command == 0x00 && num_parameters == 1)
|
|
msleep(parameters[0]);
|
|
else if (num_parameters)
|
|
mipi_dbi_command_stackbuf(dbi, command, parameters, num_parameters);
|
|
else
|
|
mipi_dbi_command(dbi, command);
|
|
|
|
i += num_parameters;
|
|
}
|
|
}
|
|
|
|
struct panel_mipi_dbi_device {
|
|
struct mipi_dbi_dev dbidev;
|
|
|
|
struct drm_plane plane;
|
|
struct drm_crtc crtc;
|
|
struct drm_encoder encoder;
|
|
struct drm_connector connector;
|
|
};
|
|
|
|
static struct panel_mipi_dbi_device *to_panel_mipi_dbi_device(struct drm_device *dev)
|
|
{
|
|
return container_of(drm_to_mipi_dbi_dev(dev), struct panel_mipi_dbi_device, dbidev);
|
|
}
|
|
|
|
static const u64 panel_mipi_dbi_plane_format_modifiers[] = {
|
|
DRM_MIPI_DBI_PLANE_FORMAT_MODIFIERS,
|
|
};
|
|
|
|
static const struct drm_plane_helper_funcs panel_mipi_dbi_plane_helper_funcs = {
|
|
DRM_MIPI_DBI_PLANE_HELPER_FUNCS,
|
|
};
|
|
|
|
static const struct drm_plane_funcs panel_mipi_dbi_plane_funcs = {
|
|
DRM_MIPI_DBI_PLANE_FUNCS,
|
|
.destroy = drm_plane_cleanup,
|
|
};
|
|
|
|
static void panel_mipi_dbi_crtc_helper_atomic_enable(struct drm_crtc *crtc,
|
|
struct drm_atomic_commit *state)
|
|
{
|
|
struct drm_device *drm = crtc->dev;
|
|
struct panel_mipi_dbi_device *panel_mipi_dbi = to_panel_mipi_dbi_device(drm);
|
|
struct mipi_dbi_dev *dbidev = &panel_mipi_dbi->dbidev;
|
|
struct mipi_dbi *dbi = &dbidev->dbi;
|
|
int ret, idx;
|
|
|
|
if (!drm_dev_enter(drm, &idx))
|
|
return;
|
|
|
|
drm_dbg(drm, "\n");
|
|
|
|
ret = mipi_dbi_poweron_conditional_reset(dbidev);
|
|
if (ret < 0)
|
|
goto out_exit;
|
|
if (!ret)
|
|
panel_mipi_dbi_commands_execute(dbi, dbidev->driver_private);
|
|
|
|
backlight_enable(dbidev->backlight);
|
|
out_exit:
|
|
drm_dev_exit(idx);
|
|
}
|
|
|
|
static const struct drm_crtc_helper_funcs panel_mipi_dbi_crtc_helper_funcs = {
|
|
DRM_MIPI_DBI_CRTC_HELPER_FUNCS,
|
|
.atomic_enable = panel_mipi_dbi_crtc_helper_atomic_enable,
|
|
};
|
|
|
|
static const struct drm_crtc_funcs panel_mipi_dbi_crtc_funcs = {
|
|
DRM_MIPI_DBI_CRTC_FUNCS,
|
|
.destroy = drm_crtc_cleanup,
|
|
};
|
|
|
|
static const struct drm_encoder_funcs panel_mipi_dbi_encoder_funcs = {
|
|
.destroy = drm_encoder_cleanup,
|
|
};
|
|
|
|
static const struct drm_connector_helper_funcs panel_mipi_dbi_connector_helper_funcs = {
|
|
DRM_MIPI_DBI_CONNECTOR_HELPER_FUNCS,
|
|
};
|
|
|
|
static const struct drm_connector_funcs panel_mipi_dbi_connector_funcs = {
|
|
DRM_MIPI_DBI_CONNECTOR_FUNCS,
|
|
.destroy = drm_connector_cleanup,
|
|
};
|
|
|
|
static const struct drm_mode_config_helper_funcs panel_mipi_dbi_mode_config_helper_funcs = {
|
|
DRM_MIPI_DBI_MODE_CONFIG_HELPER_FUNCS,
|
|
};
|
|
|
|
static const struct drm_mode_config_funcs panel_mipi_dbi_mode_config_funcs = {
|
|
DRM_MIPI_DBI_MODE_CONFIG_FUNCS,
|
|
};
|
|
|
|
DEFINE_DRM_GEM_DMA_FOPS(panel_mipi_dbi_fops);
|
|
|
|
static const struct drm_driver panel_mipi_dbi_driver = {
|
|
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
|
|
.fops = &panel_mipi_dbi_fops,
|
|
DRM_GEM_DMA_DRIVER_OPS_VMAP,
|
|
DRM_FBDEV_DMA_DRIVER_OPS,
|
|
.debugfs_init = mipi_dbi_debugfs_init,
|
|
.name = "panel-mipi-dbi",
|
|
.desc = "MIPI DBI compatible display panel",
|
|
.major = 1,
|
|
.minor = 0,
|
|
};
|
|
|
|
static int panel_mipi_dbi_get_mode(struct mipi_dbi_dev *dbidev, struct drm_display_mode *mode)
|
|
{
|
|
struct device *dev = dbidev->drm.dev;
|
|
u16 hback_porch, vback_porch;
|
|
int ret;
|
|
|
|
ret = of_get_drm_panel_display_mode(dev->of_node, mode, NULL);
|
|
if (ret) {
|
|
dev_err(dev, "%pOF: failed to get panel-timing (error=%d)\n", dev->of_node, ret);
|
|
return ret;
|
|
}
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
|
|
hback_porch = mode->htotal - mode->hsync_end;
|
|
vback_porch = mode->vtotal - mode->vsync_end;
|
|
|
|
/*
|
|
* Make sure width and height are set and that only back porch and
|
|
* pixelclock are set in the other timing values. Also check that
|
|
* width and height don't exceed the 16-bit value specified by MIPI DCS.
|
|
*/
|
|
if (!mode->hdisplay || !mode->vdisplay || mode->flags ||
|
|
mode->hsync_end > mode->hdisplay || (hback_porch + mode->hdisplay) > 0xffff ||
|
|
mode->vsync_end > mode->vdisplay || (vback_porch + mode->vdisplay) > 0xffff) {
|
|
dev_err(dev, "%pOF: panel-timing out of bounds\n", dev->of_node);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The driver doesn't use the pixel clock but it is mandatory so fake one if not set */
|
|
if (!mode->clock)
|
|
mode->clock = mode->htotal * mode->vtotal * 60 / 1000;
|
|
|
|
dbidev->top_offset = vback_porch;
|
|
dbidev->left_offset = hback_porch;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int panel_mipi_dbi_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct device *dev = &spi->dev;
|
|
struct panel_mipi_dbi_device *panel_mipi_dbi;
|
|
struct mipi_dbi_dev *dbidev;
|
|
struct drm_device *drm;
|
|
struct drm_display_mode mode;
|
|
struct mipi_dbi *dbi;
|
|
struct gpio_desc *dc;
|
|
unsigned int bpp;
|
|
size_t buf_size;
|
|
u32 formats[2];
|
|
struct drm_plane *plane;
|
|
struct drm_crtc *crtc;
|
|
struct drm_encoder *encoder;
|
|
struct drm_connector *connector;
|
|
int ret;
|
|
|
|
panel_mipi_dbi = devm_drm_dev_alloc(dev, &panel_mipi_dbi_driver,
|
|
struct panel_mipi_dbi_device,
|
|
dbidev.drm);
|
|
if (IS_ERR(panel_mipi_dbi))
|
|
return PTR_ERR(panel_mipi_dbi);
|
|
dbidev = &panel_mipi_dbi->dbidev;
|
|
dbi = &dbidev->dbi;
|
|
drm = &dbidev->drm;
|
|
|
|
ret = panel_mipi_dbi_get_mode(dbidev, &mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dbidev->regulator = devm_regulator_get(dev, "power");
|
|
if (IS_ERR(dbidev->regulator))
|
|
return dev_err_probe(dev, PTR_ERR(dbidev->regulator),
|
|
"Failed to get regulator 'power'\n");
|
|
|
|
dbidev->io_regulator = devm_regulator_get(dev, "io");
|
|
if (IS_ERR(dbidev->io_regulator))
|
|
return dev_err_probe(dev, PTR_ERR(dbidev->io_regulator),
|
|
"Failed to get regulator 'io'\n");
|
|
|
|
dbidev->backlight = devm_of_find_backlight(dev);
|
|
if (IS_ERR(dbidev->backlight))
|
|
return dev_err_probe(dev, PTR_ERR(dbidev->backlight), "Failed to get backlight\n");
|
|
|
|
dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(dbi->reset))
|
|
return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
|
|
|
|
/* Multiple panels can share the "dc" GPIO, but only if they are on the same SPI bus! */
|
|
dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
|
|
if (IS_ERR(dc))
|
|
return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n");
|
|
|
|
ret = mipi_dbi_spi_init(spi, dbi, dc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (device_property_present(dev, "write-only"))
|
|
dbi->read_commands = NULL;
|
|
|
|
dbidev->driver_private = panel_mipi_dbi_commands_from_fw(dev);
|
|
if (IS_ERR(dbidev->driver_private))
|
|
return PTR_ERR(dbidev->driver_private);
|
|
|
|
ret = panel_mipi_dbi_get_format(dev, formats, &bpp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
buf_size = DIV_ROUND_UP(mode.hdisplay * mode.vdisplay * bpp, 8);
|
|
ret = drm_mipi_dbi_dev_init(dbidev, &mode, formats[0], 0, buf_size);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = drmm_mode_config_init(drm);
|
|
if (ret)
|
|
return ret;
|
|
|
|
drm->mode_config.min_width = dbidev->mode.hdisplay;
|
|
drm->mode_config.max_width = dbidev->mode.hdisplay;
|
|
drm->mode_config.min_height = dbidev->mode.vdisplay;
|
|
drm->mode_config.max_height = dbidev->mode.vdisplay;
|
|
drm->mode_config.funcs = &panel_mipi_dbi_mode_config_funcs;
|
|
drm->mode_config.preferred_depth = bpp;
|
|
drm->mode_config.helper_private = &panel_mipi_dbi_mode_config_helper_funcs;
|
|
|
|
plane = &panel_mipi_dbi->plane;
|
|
ret = drm_universal_plane_init(drm, plane, 0, &panel_mipi_dbi_plane_funcs,
|
|
formats, ARRAY_SIZE(formats),
|
|
panel_mipi_dbi_plane_format_modifiers,
|
|
DRM_PLANE_TYPE_PRIMARY, NULL);
|
|
if (ret)
|
|
return ret;
|
|
drm_plane_helper_add(plane, &panel_mipi_dbi_plane_helper_funcs);
|
|
drm_plane_enable_fb_damage_clips(plane);
|
|
|
|
crtc = &panel_mipi_dbi->crtc;
|
|
ret = drm_crtc_init_with_planes(drm, crtc, plane, NULL, &panel_mipi_dbi_crtc_funcs,
|
|
NULL);
|
|
if (ret)
|
|
return ret;
|
|
drm_crtc_helper_add(crtc, &panel_mipi_dbi_crtc_helper_funcs);
|
|
|
|
encoder = &panel_mipi_dbi->encoder;
|
|
ret = drm_encoder_init(drm, encoder, &panel_mipi_dbi_encoder_funcs,
|
|
DRM_MODE_ENCODER_NONE, NULL);
|
|
if (ret)
|
|
return ret;
|
|
encoder->possible_crtcs = drm_crtc_mask(crtc);
|
|
|
|
connector = &panel_mipi_dbi->connector;
|
|
ret = drm_connector_init(drm, connector, &panel_mipi_dbi_connector_funcs,
|
|
DRM_MODE_CONNECTOR_SPI);
|
|
if (ret)
|
|
return ret;
|
|
drm_connector_helper_add(connector, &panel_mipi_dbi_connector_helper_funcs);
|
|
|
|
ret = drm_connector_attach_encoder(connector, encoder);
|
|
if (ret)
|
|
return ret;
|
|
|
|
drm_mode_config_reset(drm);
|
|
|
|
ret = drm_dev_register(drm, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
spi_set_drvdata(spi, drm);
|
|
|
|
if (bpp == 16)
|
|
drm_client_setup_with_fourcc(drm, DRM_FORMAT_RGB565);
|
|
else
|
|
drm_client_setup_with_fourcc(drm, DRM_FORMAT_RGB888);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void panel_mipi_dbi_spi_remove(struct spi_device *spi)
|
|
{
|
|
struct drm_device *drm = spi_get_drvdata(spi);
|
|
|
|
drm_dev_unplug(drm);
|
|
drm_atomic_helper_shutdown(drm);
|
|
}
|
|
|
|
static void panel_mipi_dbi_spi_shutdown(struct spi_device *spi)
|
|
{
|
|
drm_atomic_helper_shutdown(spi_get_drvdata(spi));
|
|
}
|
|
|
|
static int __maybe_unused panel_mipi_dbi_pm_suspend(struct device *dev)
|
|
{
|
|
return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
|
|
}
|
|
|
|
static int __maybe_unused panel_mipi_dbi_pm_resume(struct device *dev)
|
|
{
|
|
drm_mode_config_helper_resume(dev_get_drvdata(dev));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops panel_mipi_dbi_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(panel_mipi_dbi_pm_suspend, panel_mipi_dbi_pm_resume)
|
|
};
|
|
|
|
static const struct of_device_id panel_mipi_dbi_spi_of_match[] = {
|
|
{ .compatible = "panel-mipi-dbi-spi" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, panel_mipi_dbi_spi_of_match);
|
|
|
|
static const struct spi_device_id panel_mipi_dbi_spi_id[] = {
|
|
{ "panel-mipi-dbi-spi", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, panel_mipi_dbi_spi_id);
|
|
|
|
static struct spi_driver panel_mipi_dbi_spi_driver = {
|
|
.driver = {
|
|
.name = "panel-mipi-dbi-spi",
|
|
.of_match_table = panel_mipi_dbi_spi_of_match,
|
|
.pm = &panel_mipi_dbi_pm_ops,
|
|
},
|
|
.id_table = panel_mipi_dbi_spi_id,
|
|
.probe = panel_mipi_dbi_spi_probe,
|
|
.remove = panel_mipi_dbi_spi_remove,
|
|
.shutdown = panel_mipi_dbi_spi_shutdown,
|
|
};
|
|
module_spi_driver(panel_mipi_dbi_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("MIPI DBI compatible display panel driver");
|
|
MODULE_AUTHOR("Noralf Trønnes");
|
|
MODULE_LICENSE("GPL");
|