Andrew Lunn 296739839f net: phy: marvell: Fix double free of hwmon device ...

The hwmon temperature sensor devices is registered using a devm_hwmon
API call.  The marvell_release() would then manually free the device,
not using a devm_hmon API, resulting in the device being removed
twice, leading to a crash in kernfs_find_ns() during the second
removal.

Remove the manual removal, which makes marvell_release() empty, so
remove it as well.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 0b04680fda ("phy: marvell: Add support for temperature sensor")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-09 22:41:03 -08:00

..

amd.c

…

aquantia.c

…

at803x.c

…

bcm7xxx.c

net: phy: bcm7xxx: Add BCM74371 PHY ID

2017-02-07 13:03:10 -05:00

bcm63xx.c

net: phy: bcm63xx: Utilize correct config_intr function

2017-01-18 16:56:10 -05:00

bcm87xx.c

…

bcm-cygnus.c

…

bcm-phy-lib.c

…

bcm-phy-lib.h

…

broadcom.c

net: phy: broadcom: rehook BCM54612E specific init

2017-02-01 14:20:20 -05:00

cicada.c

…

davicom.c

…

dp83640_reg.h

…

dp83640.c

…

dp83848.c

net: phy: dp83848: add DP83620 PHY support

2017-01-17 15:47:25 -05:00

dp83867.c

net: phy: dp83867: Recover from "port mirroring" N/A MODE4

2017-02-07 13:59:27 -05:00

et1011c.c

…

fixed_phy.c

…

icplus.c

…

intel-xway.c

…

Kconfig

net: phy: Add Meson GXL PHY hardware dependency

2017-01-09 16:34:39 -05:00

lxt.c

…

Makefile

net: phy: Allow pre-declaration of MDIO devices

2017-02-07 10:51:46 -05:00

marvell.c

net: phy: marvell: Fix double free of hwmon device

2017-03-09 22:41:03 -08:00

mdio_bus.c

net: phy: Allow pre-declaration of MDIO devices

2017-02-07 10:51:46 -05:00

mdio_device.c

net: phy: Allow pre-declaration of MDIO devices

2017-02-07 10:51:46 -05:00

mdio-bcm-iproc.c

net: phy: Initialize mdio clock at probe function

2017-02-09 17:10:23 -05:00

mdio-bcm-unimac.c

…

mdio-bitbang.c

…

mdio-boardinfo.c

net: phy: Allow pre-declaration of MDIO devices

2017-02-07 10:51:46 -05:00

mdio-boardinfo.h

net: phy: Allow pre-declaration of MDIO devices

2017-02-07 10:51:46 -05:00

mdio-cavium.c

…

mdio-cavium.h

…

mdio-gpio.c

net: mdio-gpio: Use gpio subsystem to handle low-active pins

2017-01-12 15:05:10 -05:00

mdio-hisi-femac.c

…

mdio-moxart.c

…

mdio-mux-bcm-iproc.c

…

mdio-mux-gpio.c

…

mdio-mux-mmioreg.c

…

mdio-mux.c

…

mdio-octeon.c

…

mdio-sun4i.c

…

mdio-thunder.c

…

mdio-xgene.c

xgene_enet: remove bogus forward declarations

2017-02-02 17:12:20 -05:00

mdio-xgene.h

xgene_enet: remove bogus forward declarations

2017-02-02 17:12:20 -05:00

meson-gxl.c

…

micrel.c

net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause

2017-01-29 18:45:15 -05:00

microchip.c

…

mscc.c

net: phy: Add LED mode driver for Microsemi PHYs.

2017-02-08 13:29:04 -05:00

national.c

…

phy_device.c

net: phy: Do not perform software reset for Generic PHY

2017-03-05 17:57:27 -08:00

phy_led_triggers.c

net: phy: leds: Break dependency of phy.h on phy_led_triggers.h

2017-01-25 14:40:19 -05:00

phy.c

net: phy: Add missing driver check in phy_aneg_done()

2017-02-24 11:42:55 -05:00

qsemi.c

…

realtek.c

…

smsc.c

…

spi_ks8995.c

spi_ks8995: regs_size incorrect for some devices

2017-03-07 13:33:24 -08:00

ste10Xp.c

…

swphy.c

…

swphy.h

…

teranetics.c

…

vitesse.c

…

xilinx_gmii2rgmii.c

…