Magnus Damm 6f26d19fce sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec ...

Update the sh7724 processor code to always enable vpu_clk.

On the Ecovec board, set the vpu_clk to 166 Mhz.

The 166MHz setting results in a divide-by-6 setup for
vpu_clk and improves the VPU performance compared to the
power-on-reset/bootloader configuration.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

2010-02-22 19:11:23 +09:00

..

clock-sh7343.c

sh: introduce struct clk_div4_table

2010-02-22 19:11:20 +09:00

clock-sh7366.c

sh: introduce struct clk_div4_table

2010-02-22 19:11:20 +09:00

clock-sh7722.c

sh: introduce struct clk_div4_table

2010-02-22 19:11:20 +09:00

clock-sh7723.c

sh: introduce struct clk_div4_table

2010-02-22 19:11:20 +09:00

clock-sh7724.c

sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec

2010-02-22 19:11:23 +09:00

clock-sh7757.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

clock-sh7763.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

clock-sh7770.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

clock-sh7780.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

clock-sh7785.c

sh: introduce struct clk_div4_table

2010-02-22 19:11:20 +09:00

clock-sh7786.c

sh: introduce struct clk_div4_table

2010-02-22 19:11:20 +09:00

clock-shx3.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

hwblk-sh7722.c

sh: Add support for multiple hwblk counters

2009-07-20 04:23:39 +09:00

hwblk-sh7723.c

sh: hwblk support for sh7723

2009-07-20 04:23:44 +09:00

hwblk-sh7724.c

sh: hwblk support for sh7724

2009-08-04 14:40:55 +09:00

Makefile

sh: Abstracted SH-4A UBC support on hw-breakpoint core.

2010-01-05 19:06:45 +09:00

perf_event.c

sh: perf events: Document SH-4A raw event codes.

2009-11-09 14:11:07 +09:00

pinmux-sh7722.c

sh: add high impedance mode management for SIUA pins on sh7722

2010-02-02 13:02:30 +09:00

pinmux-sh7723.c

…

pinmux-sh7724.c

sh: Add support for SH7724 (SH-Mobile R2R) CPU subtype.

2009-04-16 14:40:56 +09:00

pinmux-sh7757.c

sh: Add initial support for SH7757 CPU subtype

2009-08-21 17:25:47 +09:00

pinmux-sh7785.c

…

pinmux-sh7786.c

sh: Tidy up sh7786 pinmux table.

2009-03-31 07:39:51 +09:00

setup-sh7343.c

sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724)

2009-12-15 12:06:35 +09:00

setup-sh7366.c

sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724)

2009-12-15 12:06:35 +09:00

setup-sh7722.c

sh: fix sh7722 SDHI support using INTC force_disable

2010-02-17 12:45:43 +09:00

setup-sh7723.c

sh: fix sh7723 SDHI support using INTC force_disable

2010-02-17 12:45:44 +09:00

setup-sh7724.c

sh: fix sh7724 SDHI support using INTC force_disable

2010-02-16 13:38:57 +09:00

setup-sh7757.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

setup-sh7763.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

setup-sh7770.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

setup-sh7780.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

setup-sh7785.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

setup-sh7786.c

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

2010-01-26 12:58:40 +09:00

setup-shx3.c

sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3)

2009-12-15 12:06:36 +09:00

smp-shx3.c

sh: Fix up the secondary CPU entry point for 32bit mode.

2010-01-15 15:13:48 +09:00

ubc.c

sh: Abstracted SH-4A UBC support on hw-breakpoint core.

2010-01-05 19:06:45 +09:00