Problem: Integer overflow with "ze" and large 'sidescrolloff'.
Solution: Check for overflow to avoid negative w_leftcol (zeertzjq).
closes: #20026
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Several win_T fields are declared as "int" or "char" but are
used strictly as boolean flags with TRUE/FALSE values. The
integer types obscure the boolean intent and are wider than
needed.
Solution: Change the following win_T members to bool (stdbool.h) and
update their assignments from TRUE/FALSE to true/false
accordingly.
The following conversions have been done:
- int -> bool (10 members):
w_set_curswant, w_botfill, w_old_botfill, w_do_win_fix_cursor,
w_popup_fixed, w_border_highlight_isset, w_cline_folded,
w_redr_status, w_arg_idx_invalid, w_has_scrollbar
- char -> bool (4 members):
w_topline_was_set, w_ru_empty, w_fold_manual, w_foldinvalid
No existing code compares these members against TRUE/FALSE explicitly or
uses ++/-- / bitwise ops on them, so only plain assignments are
affected.
Excluded:
- w_locked (recursion counter with ++/--),
- w_want_scrollbar (may hold -1 from dict_get_bool),
- w_winbar_height (used in arithmetic and exposed as number via
getwininfo()).
related: #20005
closes: #20008
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot apply 'scrolloff' context lines at end of file
Solution: Add the 'scrolloffpad' option to keep 'scrolloff' context even
when at the end of the file (McAuley Penney).
closes: #19040
Signed-off-by: McAuley Penney <jacobmpenney@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'linebreak' may lead to wrong Visual block highlighting when
end char occupies multiple cells (after 7.4.467).
Solution: Exclude 'linebreak' from the ending column instead of setting
'virtualedit' temporarily (zeertzjq).
fixes: #19898closes: #19900
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: "zb" scrolls incorrectly with cursor on fold.
Solution: Set w_botline to the line below the fold (zeertzjq).
related: neovim/neovim#38413
closes: #19785
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page scrolling in Insert mode beeps (after 9.1.0211).
Solution: Fix incorrect return value of pagescroll(). Also invert the
return value of scroll_with_sms() to be less confusing and
match comments (zeertzjq).
fixes: #19326closes: #19327
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display with 'smoothscroll' when FEAT_DIFF is disabled.
Solution: Use plines_correct_topline() (zeertzjq).
closes: #18649
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Generating prototype files does not work on all platforms
Solution: Rework prototypes generation using python instead of cproto,
enable it in CI to test it for each PR (Hirohito Higashi).
closes: #18045
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'cursorlineopt' "screenline" isn't redrawn when moving cursor
and then using line("w0") and :retab that does nothing.
Solution: Call redraw_for_cursorcolumn() when setting a valid w_virtcol
(zeertzjq).
closes: #18506
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to anchor specific lines in difff mode
Solution: Add support for the anchoring lines in diff mode using the
'diffanchor' option (Yee Cheng Chin).
Adds support for anchoring specific lines to each other while viewing a
diff. While lines are anchored, they are guaranteed to be aligned to
each other in a diff view, allowing the user to control and inform the
diff algorithm what the desired alignment is. Internally, this is done
by splitting up the buffer at each anchor and run the diff algorithm on
each split section separately, and then merge the results back for a
logically consistent diff result.
To do this, add a new "diffanchors" option that takes a list of
`{address}`, and a new "diffopt" option value "anchor". Each address
specified will be an anchor, and the user can choose to use any type of
address, including marks, line numbers, or pattern search. Anchors are
sorted by line number in each file, and it's possible to have multiple
anchors on the same line (this is useful when doing multi-buffer diff).
Update documentation to provide examples.
This is similar to Git diff's `--anchored` flag. Other diff tools like
Meld/Araxis Merge also have similar features (called "synchronization
points" or "synchronization links"). We are not using Git/Xdiff's
`--anchored` implementation here because it has a very limited API
(it requires usage of the Patience algorithm, and can only anchor
unique lines that are the same across both files).
Because the user could anchor anywhere, diff anchors could result in
adjacent diff blocks (one block is directly touching another without a
gap), if there is a change right above the anchor point. We don't want
to merge these diff blocks because we want to line up the change at the
anchor. Adjacent diff blocks were first allowed when linematch was
added, but the existing code had a lot of branched paths where
line-matched diff blocks were handled differently. As a part of this
change, refactor them to have a more unified code path that is
generalized enough to handle adjacent diff blocks correctly and without
needing to carve in exceptions all over the place.
closes: #17615
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: style: more wrong indentation
Solution: reformat a few more places
(Yegappan Lakshmanan)
closes: #17309
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: One-off error in "count" to make "w_skipcol" zero with
'nosmoothscroll' page scrolling when last virtual line
in a buffer line is exactly the entire window width.
(Hirohito Higashi)
Solution: Properly compute the smallest integer value necessary
to make "w_skipcol" zero (Luuk van Baal)
fixes: #17317closes: #17318
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Loop that ensures "w_skipcol" is zero with 'nosmoothscroll'
for (half)-page scrolling is inefficient.
Solution: Calculate the required "count" instead of looping until
"w_skipcol" is zero (Luuk van Baal).
fixes: #17301closes: #17306
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cursor_correct() calculates a valid cursor position which
is later changed by update_topline() and causes Ctrl-D
scrolling to be stuck (Daniel Steinberg, after v9.1.0258).
Solution: Update the valid cursor position before validating topline
(Luuk van Baal).
fixes: #17106closes: #17110
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'smoothscroll' gets stuck with 'listchars' "eol".
Solution: Count size of 'listchars' "eol" in line size when scrolling.
(zeertzjq)
related: neovim/neovim#32405
closes: #16627
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Crash after scrolling and pasting in silent Ex mode.
(fizz-is-on-the-way)
Solution: Don't move cursor to line 0 when scrolling.
(zeertzjq)
closes: #16506
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cursor is moved to bottom of window trying to pagescroll when
already at the start of the buffer (Asheq Imran, after v9.1.0357)
Solution: Don't move cursor when buffer content did not move.
(Luuk van Baal)
closes: #15139
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unable to leave long line with 'smoothscroll' and 'scrolloff'.
Corrupted screen near the end of a long line with 'scrolloff'.
(Ernie Rael, after 9.1.0280)
Solution: Only correct cursor in case scroll_cursor_bot() was not itself
called to make the cursor visible. Avoid adjusting for
'scrolloff' beyond the text line height (Luuk van Baal)
fixes: #14726closes: #14783
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: smoothscroll may cause infinite loop, with
very narrow windows
(Jaehwang Jung, after v9.1.0280)
Solution: Check for width1 being negative, verify
that win_linetabsize does not overflow
fixes: #14750closes: #14772
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No scrolling happens with half-page scrolling with line
filling entire window when 'smoothscroll' is disabled.
(Mathias Rav, after v9.1.0285)
Solution: Adjust amount to move cursor by so that it is moved the same
number of lines as was scrolled, even when scrolling different
number of lines than requested with 'nosmoothscroll'.
fixes: #14743closes: #14746
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Divide by zero with getmousepos() and 'smoothscroll'.
Solution: Don't compute skip_lines when width1 is zero.
(zeertzjq)
closes: #14747
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Calculating line height for unnecessary amount of lines with
half-page scrolling (zhscn, after 9.1.0280)
Solution: Replace "limit_winheight" argument with higher resolution
"max" argument to which to limit the calculated line height
in plines_m_win() to (Luuk van Baal)
fixes: #14650closes: #14652
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page scrolling does not always place the cursor at the top or
bottom of the window (Mathias Rav)
Solution: Place the cursor at the top or bottom of the window.
(Luuk van Baal)
fixes: #14585closes: #14586
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong cursor position after using setcellwidths().
Solution: Invalidate cursor position in addition to redrawing.
(zeertzjq)
closes: #14545
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Filler lines not checked properly in get_scroll_overlap().
Solution: Add missing parentheses (zeertzjq).
The missing parentheses causes the second argument to diff_check_fill()
to always be 0 as it is the result of a comparison between a positive
integer and -1 (the value of BACKWARD), in which case diff_check_fill()
always returns 0 instead of the number of filler lines above a line.
It's very hard to add a test for this, because this mistake at most
leads to 2 screen lines of difference in scrolling behavior, and in
cases where it may indeed lead to a difference in behavior, neither
behavior achieves complete symmetry between CTRL-F and CTRL-B.
closes: #14527
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: plines_m_win() does not take into account it's "limit_winheight"
argument for filler lines below the last line of the buffer.
(after v9.1.0280)
Solution: Check window height when "limit_winheight" is TRUE.
(Luuk van Baal)
closes: #14449
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Problems with cursor position when scrolling half a page.
Solution: Rework the cursor logic. (Luuk van Baal)
closes: #14455
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Logic to make sure cursor is in visible part of the screen after
scrolling the text with 'smoothscroll' is scattered, asymmetric
and contains bugs.
Solution: Adjust and create helper function for 'smoothscroll' cursor logic.
(Luuk van Baal)
closes: #14410
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
closes: #14394
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
fixes: #14338closes: #14377
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
closes: #14316
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
closes: #14268
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The call to redraw_for_cursorline() in nv_mousescroll() is
unnecessary because redraw_for_cursorline() only sets redraw
type to UPD_VALID, and all code paths in do_mousescroll()
already set redraw type to at least UPD_VALID.
Solution: Remove call to redraw_for_cursorline() in nv_mousescroll().
(zeertzjq)
closes: #13979
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Things that temporarily change/restore curwin/buf (e.g:
win_execute, some autocmds) may break assumptions that
curwin/buf is the cmdwin when "cmdwin_type != 0", causing
issues.
Solution: Expose the cmdwin's real win/buf and check that instead. Also
try to ensure these variables are NULL if "cmdwin_type == 0",
allowing them to be used directly in most cases without
checking cmdwin_type. (Sean Dewar)
Alternatively, we could ban win_execute in the cmdwin and audit all places that
temporarily change/restore curwin/buf, but I didn't notice any problems arising
from allowing this (standard cmdwin restrictions still apply, so things that may
actually break the cmdwin are still forbidden).
closes: #12819
Signed-off-by: Sean Dewar <seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: FPE in adjust_plines_for_skipcol
Solution: don't divide by zero, return zero
Prevent a floating point exception when calculating w_skipcol (which can
happen with a small window when the number option is set and cpo+=n).
Add a test to verify
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Skipcol is not reset when topline changed scrolling cursor to top
Solution: reset skipcol
closes: #13528closes: #13532
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: #13335
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: #13321
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: partially revert patch v9.0.1997
Solution: add a comment, to make clear it's not used
related: #13288
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Some unused code in move.c and string.c
Solution: Remove it
closes: #13288
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: Scrolling non-current window using mouse is inconsistent
depending on 'scrollbind'/'scrolloff' and different from GUI
vertical scrollbar when 'cursorbind' is set.
Solution: Don't move cursor in non-current windows for 'cursorbind' if
cursor in the current window didn't move.
closes: #13219closes: #13210
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Cannot scroll up in diff mode with many filler lines and zero
'scrolloff'.
Solution: Invalidate w_cline_row before calling comp_botline().
closes: #13256
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Clean up cmdline option completion code
Solution: Fix various minor problems
- Fix manual array size calculations to just use `ARRAY_LENGTH()`.
- Fix unintentional typo in comments due to copy-paste error.
- Fix assert_equal() usages to pass the expected value to first
parameter instead of 2nd one to avoid confusion.
- Fix signed vs unsigned warnings
- Correct misplaced comments about set_op_T and set_prefix_T
and fix a typo in another comment
closes: #13249closes: #13237
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Cursor position still wrong with 'showbreak' and virtual text
after last character or 'listchars' "eol".
Solution: Remove unnecessary w_wcol adjustment in curs_columns(). Also
fix first char of virtual text not shown at the start of a screen
line.
closes: #12478closes: #12532closes: #12904
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: wrong cursor position with 'showbreak' and lcs-eol
Solution: Add size of 'showbreak' before when 'listchars' "eol" is used.
Also fix wrong cursor position with wrapping virtual text on
empty line and 'showbreak'.
closes: #12891
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: screenpos() may cause unnecessary redraw.
Solution: Don't unnecessarily reset VALID_WROW flag.
VALID_WROW flag is only used by two functions: validate_cursor() and
cursor_valid(), and cursor_valid() is only used once in ex_sleep().
When adjust_plines_for_skipcol() was first added in patch 9.0.0640, it
was called in two functions: comp_botline() and curs_rows().
- comp_botline() is called in two places:
- onepage(), which resets VALID_WROW flag immediately afterwards.
- validate_botline_win(), where resetting a VALID_ flag is strange.
- curs_rows() is called in two places:
- curs_columns(), which sets VALID_WROW flag afterwards.
- validate_cline_row(), which is only used by GUI mouse focus.
Therefore resetting VALID_WROW there doesn't seem to do anything useful.
Also, a w_skipcol check (which resets VALID_WROW flag) was added to
check_cursor_moved() in patch 9.0.0734, which seems to make more sense
than resetting that flag in the middle of a computation.
While at it make adjust_plines_for_skipcol() and textpos2screenpos() a
bit less confusing:
- Make adjust_plines_for_skipcol() return "off" instead of "n - off".
- Use 0-based "row" in textpos2screenpos() until W_WINROW is added.
closes: #12832
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
zeertzjq
Hirohito Higashi
McAuley Penney
Yee Cheng Chin
Yegappan Lakshmanan
Luuk van Baal
Christian Brabandt
Sean Dewar
dundargoc