directory_exists_in_index() takes pathname and its length, but its
helper function directory_exists_in_index_icase() reads one byte
beyond the end of the pathname and expects there to be a '/'.
This needs to be fixed, as that one-byte-beyond-the-end location may
not even be readable, possibly by not registering directories to
name hashes with trailing slashes. In the meantime, update the new
caller added recently to treat_one_path() to make sure that the path
buffer it gives the function is one byte longer than the path it is
asking the function about by appending a slash to it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier draft of the previous step used cache_name_exists() to
check the directory we were looking at, which missed the second case
described in its log message. Demonstrate why it is not sufficient.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"ls-files -o" and "ls-files -k" both traverse the working tree down
to find either all untracked paths or those that will be "killed"
(removed from the working tree to make room) when the paths recorded
in the index are checked out. It is necessary to traverse the
working tree fully when enumerating all the "other" paths, but when
we are only interested in "killed" paths, we can take advantage of
the fact that paths that do not overlap with entries in the index
can never be killed.
The treat_one_path() helper function, which is called during the
recursive traversal, is the ideal place to implement an
optimization.
When we are looking at a directory P in the working tree, there are
three cases:
(1) P exists in the index. Everything inside the directory P in
the working tree needs to go when P is checked out from the
index.
(2) P does not exist in the index, but there is P/Q in the index.
We know P will stay a directory when we check out the contents
of the index, but we do not know yet if there is a directory
P/Q in the working tree to be killed, so we need to recurse.
(3) P does not exist in the index, and there is no P/Q in the index
to require P to be a directory, either. Only in this case, we
know that everything inside P will not be killed without
recursing.
Note that this helper is called by treat_leading_path() that decides
if we need to traverse only subdirectories of a single common
leading directory, which is essential for this optimization to be
correct. This caller checks each level of the leading path
component from shallower directory to deeper ones, and that is what
allows us to only check if the path appears in the index. If the
call to treat_one_path() weren't there, given a path P/Q/R, the real
traversal may start from directory P/Q/R, even when the index
records P as a regular file, and we would end up having to check if
any leading subpath in P/Q/R, e.g. P, appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These codepaths always start from the_index and use index_*
functions, but there is no reason to do so. Use the compatibility
cache_* macro to access the current in-core index like everybody
else.
While at it, fix typo in the comment for a function to check if a
path within a directory appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh completion wrapper doesn't reimplement __gitcompadd(). Although it
should be trivial to do that, let's use __gitcomp_nl() which achieves
exactly the same thing, specially since the suffix ($4) has to be empty.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: introduce --parents parameter for commands branch and tag
git-svn: clarify explanation of --destination argument
git-svn: multiple fetch/branches/tags keys are supported
This parameter is equivalent to the parameter --parents on svn cp commands
and is useful for non-standard repository layouts.
Signed-off-by: Tobias Schulte <tobias.schulte@gliderpilot.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The existing documentation for "-d" does not make it obvious whether
its argument is supposed to be a full svn path, a partial svn path,
the glob from the config file, or what. Clarify the text and add an
example to get the reader started.
Reported-by: Nathan Gray <n8gray@n8gray.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
"git svn" can be configured to use multiple fetch, branches, and tags
refspecs by passing multiple --branches or --tags options at init time
or editing the configuration file later, which can be handy when
working with messy Subversion repositories. Add a note to the
configuration section documenting how this works.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git clone hangs on windows, and file.write would return errno 22 inside
of mercurial's windows.winstdout wrapper class. This patch sets stdout's
mode to binary, fixing both issues.
[fc: cleaned up]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 02c5631 (difftool --dir-diff: symlink all files matching the
working tree, 2013-03-14) does not handle the case where a file that is
being compared does not exist in the working tree. Fix this by checking
for existence explicitly before running git-hash-object.
Reported-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 24317ef32a.
Different versions of Mercurial have different arguments for
bookmarks.updatefromremote(), while it should be possible to call the
right function with the right arguments depending on the version, it's
safer to restore the old behavior for now.
Reported by Rodney Lorrimar.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe how 'add' sets the submodule's logical name, which is used in
the configuration entry names.
Clarify that 'init' only sets up the configuration entries for
submodules that have already been added elsewhere. Describe that
<path> arguments limit the submodules that are configured.
Signed-off-by: Dale Worley <worley@ariadne.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 95b0c60 (remote-bzr: add support for bzr repos) introduced a
regression by assuming all bzr remote repos are listable, but they are
not.
If they are not listable they are basically useless, so let's assume
there is no bzr repo.
Reported-by: Thorsten Kranzkowski <dl8bcu@dl8bcu.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, the user would never ever see new bookmarks, only the
ones that (s)he initially cloned.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In certain situations we might end up pushing garbage revisions
(e.g. in a rebase), and the patches to deal with that haven't been
merged yet. So let's disable forced pushes by default.
We are essentially reverting back to the old v1.8.2 behavior, to
minimize the possibility of regressions, but in a way the user can
configure.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user creates a new branch with git:
% git checkout -b branches/devel
and then pushes this branch
% git push origin branches/devel
which is the way to push new mercurial branches, we do want to
create a branch, but the command would fail without newbranch=True.
This only matters when force_push=False, but setting newbranch=True
unconditionally does not hurt.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove try/except check because we are no longer calling
check_output(), which may throw an exception.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop unused "global", and remove redundant comparison of two files.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a clone exists with the old organization (v1.8.2) it will prevent
the new shared bzr repository organization from working, so let's
remove this repository, which is not used any more.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://ozlabs.org/~paulus/gitk:
gitk: On OSX, bring the gitk window to front
gitk: Add support for -G'regex' pickaxe variant
gitk: Add menu item for reverting commits
gitk: Simplify file filtering
gitk: Display the date of a tag in a human-friendly way
gitk: Improve behaviour of drop-down lists
gitk: Move hard-coded colors to .gitk
On OSX, Tcl/Tk application windows are created behind all
the applications down the stack of windows. This is very
annoying, because once a gitk window appears, it's the
downmost window and switching to it is pain.
The patch is: if we are on OSX, use osascript to
bring the current Wish process window to front.
Signed-off-by: Tair Sabirgaliev <tair.sabirgaliev@gmail.com>
Thanks-to: Stefan Haller <lists@haller-berlin.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
git log -G'regex' is a very useful alternative to the classic
pickaxe. Minimal patch to make it usable from gitk.
[zj: reword message]
[paulus@samba.org: reword droplist item]
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Using sed -e '/[0-9]\+//' to find "one or more digits" is not
portable.
Use the Basic Regular Expression '/[0-9][0-9]*//' instead.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it's helpful (at least psychologically) to have this feature
easily accessible. Code borrows heavily from cherrypick.
Signed-off-by: Knut Franke <Knut.Franke@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
git diff is perfectly able to do this with '-- files', no need for
manual filtering. This makes gettreediffs consistent with getblobdiffs.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
By selecting a tag within gitk you can display information about it.
This information is output by using the command
'git cat-file tag <tagid>'
This outputs the *raw* information from the tag, amongst which is the
time - in seconds since the epoch. As useful as that value is, I find it
a lot easier to read and process time which it is something like:
"Mon Dec 31 14:26:11 2012 -0800"
This change will modify the display of tags in gitk like so:
@@ -1,7 +1,7 @@
object 5d417842ef
type commit
tag v1.8.1
-tagger Junio C Hamano <gitster@pobox.com> 1356992771 -0800
+tagger Junio C Hamano <gitster@pobox.com> Mon Dec 31 14:26:11 2012 -0800
Git 1.8.1
-----BEGIN PGP SIGNATURE-----
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The drop-down lists used for things like the criteria for finding
commits (containing/touching paths/etc.) use a combobox if we are
using the ttk widgets. By default the combobox exports its value
as the selection when it is changed, which is unnecessary, and sometimes
the combobox wouldn't release the selection, which is annoying.
To fix this, we make these comboboxes not export their selection,
and also clear their selection whenever they are changed. This makes
them more like a simple selection of alternatives, improving the look
and feel of gitk.
Signed-off-by: Paul Mackerras <paulus@samba.org>
People not familiar with AsciiDoc may not realize they are
supposed to update *.txt files and not *.html/*.1 files when
preparing patches to the project.
Signed-off-by: Dale Worley <worley@ariadne.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 1.8.2.3
t5004: avoid using tar for checking emptiness of archive
t5004: ignore pax global header file
mergetools/kdiff3: do not use --auto when diffing
transport-helper: trivial style cleanup
Fix "git cherry-pick $annotated_tag", which was mistakenly rejected.
* mv/sequencer-pick-error-diag:
cherry-pick: picking a tag that resolves to a commit is OK
Earlier, 21246dbb9e (cherry-pick: make sure all input objects are
commits, 2013-04-11) tried to catch an unlikely "git cherry-pick $blob"
as an error, but broke a more important use case to cherry-pick a
tag that points at a commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
