mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-05-26 11:40:24 +02:00
arm64: dts: allwinner: h313: Add Amediatech X96Q
The X96Q is a set-top box with an H313 SoC, AXP305 PMIC, 1 or 2 GiB RAM, 8 or 16 GiB eMMC flash, 2x USB A, Micro-SD, HDMI, Ethernet, audio/video output, and infrared input. https://x96mini.com/products/x96q-tv-box-android-10-set-top-box Tested, works: - debug UART - status LED - USB ports in host mode - MicroSD - eMMC - recovery button hidden behind audio/video port - analog audio (line out) Does not work: - Ethernet (requires AC200 MFD/EPHY driver) - WLAN (requires out-of-tree XRadio driver) - analog video output (requires AC200 driver) - HDMI audio/video output Untested: - "OTG" USB port in device mode - built-in IR receiver - external IR receiver Table of regulators on the downstream kernel, for reference: vcc-5v 1 15 0 unknown 5000mV 0mA 5000mV 5000mV dcdca 0 0 0 unknown 900mV 0mA 0mV 0mV dcdcb 0 0 0 unknown 1350mV 0mA 0mV 0mV dcdcc 0 0 0 unknown 900mV 0mA 0mV 0mV dcdcd 0 0 0 unknown 1500mV 0mA 0mV 0mV dcdce 0 0 0 unknown 3300mV 0mA 0mV 0mV aldo1 0 0 0 unknown 3300mV 0mA 0mV 0mV aldo2 0 0 0 unknown 700mV 0mA 0mV 0mV aldo3 0 0 0 unknown 700mV 0mA 0mV 0mV bldo1 0 0 0 unknown 1800mV 0mA 0mV 0mV bldo2 0 0 0 unknown 1800mV 0mA 0mV 0mV bldo3 0 0 0 unknown 700mV 0mA 0mV 0mV bldo4 0 0 0 unknown 700mV 0mA 0mV 0mV cldo1 0 0 0 unknown 2500mV 0mA 0mV 0mV cldo2 0 0 0 unknown 700mV 0mA 0mV 0mV cldo3 0 0 0 unknown 700mV 0mA 0mV 0mV Signed-off-by: J. Neuschäfer <j.ne@posteo.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://patch.msgid.link/20250918-x96q-v2-2-51bd39928806@posteo.net Signed-off-by: Chen-Yu Tsai <wens@csie.org>
This commit is contained in:
J. Neuschäfer
committed by
Chen-Yu Tsai
Chen-Yu Tsai
parent
f9d3206506
commit
07c7f4f4e9
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
|
||||
|
||||
@@ -0,0 +1,230 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sun50i-h616.dtsi"
|
||||
#include "sun50i-h616-cpu-opp.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "X96Q";
|
||||
compatible = "amediatech,x96q", "allwinner,sun50i-h616";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reg_vcc5v: vcc5v {
|
||||
/* board wide 5V supply directly from the DC input */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
key-recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&pio 7 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&codec {
|
||||
allwinner,audio-routing = "Line Out", "LINEOUT";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_dcdca>;
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* TODO: EMAC1 connected to AC200 PHY */
|
||||
|
||||
&gpu {
|
||||
mali-supply = <®_dcdcc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
/* microSD */
|
||||
vmmc-supply = <®_aldo1>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
||||
disable-wp;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* TODO: XRadio XR819 WLAN @ mmc1 */
|
||||
|
||||
&mmc2 {
|
||||
/* eMMC */
|
||||
vmmc-supply = <®_aldo1>;
|
||||
vqmmc-supply = <®_bldo1>;
|
||||
non-removable;
|
||||
cap-mmc-hw-reset;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <100000000>; /* required for stable operation */
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&r_i2c {
|
||||
status = "okay";
|
||||
|
||||
axp305: pmic@36 {
|
||||
compatible = "x-powers,axp305", "x-powers,axp805",
|
||||
"x-powers,axp806";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x36>;
|
||||
|
||||
x-powers,self-working-mode;
|
||||
vina-supply = <®_vcc5v>;
|
||||
vinb-supply = <®_vcc5v>;
|
||||
vinc-supply = <®_vcc5v>;
|
||||
vind-supply = <®_vcc5v>;
|
||||
vine-supply = <®_vcc5v>;
|
||||
aldoin-supply = <®_vcc5v>;
|
||||
bldoin-supply = <®_vcc5v>;
|
||||
cldoin-supply = <®_vcc5v>;
|
||||
|
||||
regulators {
|
||||
reg_dcdca: dcdca {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
dcdcb {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
reg_dcdcc: dcdcc {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <990000>;
|
||||
regulator-name = "vdd-gpu-sys";
|
||||
};
|
||||
|
||||
dcdcd {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vdd-dram";
|
||||
};
|
||||
|
||||
dcdce {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
reg_aldo1: aldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3";
|
||||
};
|
||||
|
||||
aldo2 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
aldo3 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
reg_bldo1: bldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8";
|
||||
};
|
||||
|
||||
bldo2 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
bldo3 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
bldo4 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
cldo1 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
cldo2 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
cldo3 {
|
||||
/* unused */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_ph_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
dr_mode = "host"; /* USB A type receptacle */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user