regulator: rpmh-regulator: Add support for new resource name format

Browse Source

Currently rpmh-regulator resource name inside CMD-DB follows this
format: `^(ldo|smp|bob|vs)[a-n][1-9][0-9]?$`

(eg - ldob11, smpa2, bobc1 etc)

Here `[a-n]` in the resource name signifies the `pmic-id`.
However, newer firmware follows a different format that also
includes the `bus_id` as well in the resource name.

New format:
`^(L|S|B)[1-9][0-9]?[A-N]_E[0-3]$`

(eg - L11B_E1, S2A_E0, B1C_E0 etc)

Here `_E[0-3]` at the end is the `bus_id`, and upper case `[A-N]`
is used to denote `pmic-id`, while the regulator `(ldo|smp|bob)`
is replaced with their initials in upper case `(L|S|B|VA)`.

To handle this properly, do the following:

- Remove the `resource_name` member from vreg init data

- Add `index` and `regulator_hw_type` new members, which will
contain the index number and the regulator hardware type
(SMPS/LDO/BOB/VS) which can be combined with the pmic-id read
from the devicetree to generate the resource_name.

- Choose new resource name format if `pmic-id` contains `_E`
in it, else fallback to old format.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-3-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

...

This commit is contained in:

Kamal Wadhwa

2025-09-18 14:57:03 +05:30

committed by Mark Brown

parent 1356c98ef9

commit 6a8cdef7dc

1 changed files with 587 additions and 548 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download Patch File Download Diff File Expand all files Collapse all files

drivers/regulator/qcom-rpmh-regulator.c

+587 -548

File diff suppressed because it is too large Load Diff