arm64: dts: renesas: gray-hawk-single: Add DisplayPort support

Add support for the mini DP output on the Gray Hawk board.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241206-rcar-gh-dsi-v3-10-d74c2166fa15@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts

@@ -59,6 +59,12 @@
 		stdout-path = "serial0:921600n8";
 	};
 
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+
 	keys {
 		compatible = "gpio-keys";
 
@@ -132,6 +138,27 @@
 		#clock-cells = <0>;
 	};
 
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out0>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
@@ -205,6 +232,25 @@
 	};
 };
 
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in0>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <16666666>;
 };
@@ -284,6 +330,55 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bridge@2c {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sn65dsi86_in0: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sn65dsi86_out0: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
+};
+
 &i2c3 {
 	pinctrl-0 = <&i2c3_pins>;
 	pinctrl-names = "default";
@@ -388,11 +483,21 @@
 		function = "i2c0";
 	};
 
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
 	i2c3_pins: i2c3 {
 		groups = "i2c3";
 		function = "i2c3";
 	};
 
+	irq0_pins: irq0_pins {
+		groups = "intc_ex_irq0_a";
+		function = "intc_ex";
+	};
+
 	keys_pins: keys {
 		pins = "GP_5_0", "GP_5_1", "GP_5_2";
 		bias-pull-up;