[ Upstream commit 81eafcada1 ]
Pre-existing issue discovered by sashiko-bot.
mock_get_lsa() and mock_set_lsa() validate the requested LSA range with
"offset + length > LSA_SIZE". Both offset and length are u32 and, in
mock_get_lsa(), both are taken directly from the user-supplied payload.
The addition is evaluated modulo 2^32, so a large offset combined with a
small length wraps around and passes the check.
Rewrite the checks to first bound offset, then compare length against the
remaining LSA size.
Suggested-by: sashiko-bot
Fixes: 7d3eb23c4c ("tools/testing/cxl: Introduce a mock memory device + driver")
Link: https://lore.kernel.org/linux-cxl/20260605143748.235271F00893@smtp.kernel.org/
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e8ad1ff71 ]
For selftest bpf_iter/task_vma, I got a failure like below on my qemu run:
test_task_vma_common:FAIL:compare_output unexpected compare_output:
actual
'561593546000-561593585000r--p0000000000:241256579534/root/devshare/bpf-next/tools/testing/selftests/bpf/test_progs'
!= expected
'561593546000-561593585000r--p0000000000:245551546830/root/devshare/bpf-next/tools/testing/selftests/bpf/test_progs'
Further debugging found out file->f_inode->i_ino value may exceed 32bit,
e.g., i_ino = 0x14c2eae35, but the format string is '%u'. This caused
inode mismatch between bpf iter and proc result.
Fix the issue by using format string '%llu' to accommodate 64bit i_ino.
Fixes: e8168840e1 ("selftests/bpf: Add test for bpf_iter_task_vma")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260610051831.1346659-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad09aa4596 ]
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end().
Reported-by: syzbot+0c89d865531d053abb2d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c89d865531d053abb2d
Fixes: 3fdcfb668f ("ext4: add journalled write support for inline data")
Signed-off-by: Aditya Prakash Srivastava <aditya.ansh182@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260608065227.3018-1-aditya.ansh182@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 807afc7544 ]
When the bonding interface has carrier down due to the absence of
usable slaves and a slave transitions from down to up, the bonding
interface briefly goes carrier up, then down again, and finally up
once LACP negotiates collecting and distributing on the port.
When lacp_strict mode is on, the interface should not transition to
carrier up until LACP negotiation is complete.
This happens because the actor and partner port states remain in
Collecting_Distributing when the port goes down. When the port
comes back up, it temporarily remains in this state until LACP
renegotiation occurs.
Previously this was mostly cosmetic, but since the bonding carrier
state may depend on the LACP negotiation state, it causes the
interface to flap.
According to IEEE 802.3ad-2000 and IEEE 802.1ax-2014, Collecting and
Distributing should be reset when a port goes down:
- In the Receive state machine, port_enabled == FALSE causes a
transition to the PORT_DISABLED state, which is expected to clear
Partner_Oper_Port_State.Synchronization.
- In the Mux state machine, Partner_Oper_Port_State.Synchronization ==
FALSE causes a transition to the ATTACHED state, which disables
Collecting and Distributing.
However, Partner_Oper_Port_State.Synchronization is not cleared in the
PORT_DISABLED state.
Clear Partner_Oper_Port_State.Synchronization in the Receive
PORT_DISABLED state.
Fixes: 655f8919d5 ("bonding: add min links parameter to 802.3ad")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260603150331.1919611-6-louis.scalbert@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85f7bf0363 ]
Call wm_adsp2_remove() in cs35l56_remove() and the error path of
cs35l56_common_probe().
Depends on commit 7d3fb78b55 ("ASoC: wm_adsp: Fix NULL dereference
when removing firmware controls").
The call to wm_halo_init() during driver probe should be paired with
a call to wm_adsp2_remove() but this was missing. The consequence
would be a memory leak of the control lists in the cs_dsp driver.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260610093432.557375-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec6177dfe9 ]
In parallel_test(), the return values of mmap() for both host_map and
guest_map are not checked against MAP_FAILED. If mmap() fails, the
subsequent code will dereference the invalid pointer, leading to a
segmentation fault.
Add MAP_FAILED checks after both mmap() calls, using err() to report
the error and exit, consistent with the existing error handling style
in this file (e.g., the open() call on line 149).
Fixes: 1515c5ce26 ("tools/virtio: add vring_test.")
Signed-off-by: longlong yan <yanlonglong@kylinos.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260605021446.1611-1-yanlonglong@kylinos.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f6898fe80 ]
vhost-net initializes one ubuf_info per outstanding zerocopy TX
descriptor and hands it to the backend socket. The networking stack may
then clone a zerocopy skb before all skb references are released. For
example, batman-adv fragmentation reaches skb_split(), which calls
skb_zerocopy_clone() and increments the same ubuf_info refcount.
vhost_zerocopy_complete() currently treats every ubuf callback as a
completed vhost descriptor. It dereferences ubuf->ctx, writes the
descriptor completion state, and drops the vhost_net_ubuf_ref even when
the callback only releases a cloned skb reference. A backend reset can
therefore wait for and free the vhost_net_ubuf_ref while another cloned
skb still carries the same ubuf_info. A later completion then
dereferences the freed ubufs pointer.
KASAN reports the stale completion as:
BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x1d7/0x1f0
BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x101/0x1f0
vhost_zerocopy_complete
skb_copy_ubufs
__dev_forward_skb2
veth_xmit
The freed object was allocated from vhost_net_ioctl() while setting the
backend and freed through kfree_rcu()/kvfree_rcu_bulk after backend
removal, while delayed skb completion still reached
vhost_zerocopy_complete().
Honor the generic ubuf_info refcount before touching vhost state, and run
the vhost descriptor completion only for the final ubuf reference. This
matches the msg_zerocopy_complete() ownership rule for cloned zerocopy
skbs.
Fixes: bab632d69e ("vhost: vhost TX zero-copy support")
Signed-off-by: Qing Ming <a0yami@mailbox.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260601104300.197210-1-a0yami@mailbox.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 929e4f0446 ]
vhost_vdpa_mmap() and vhost_vdpa_fault() use vma->vm_pgoff as a
virtqueue index for get_vq_notification(), but they do not validate
that the index is smaller than v->nvqs.
The ioctl path already performs both a bounds check and
array_index_nospec(), but the mmap/fault path only checks that the
index fits in u16. This allows an out-of-range queue index to reach
driver-specific get_vq_notification() callbacks.
Fix this by extracting a unified vhost_vdpa_get_vq_notification()
helper that validates the queue index against v->nvqs and applies
array_index_nospec() before calling the driver callback. Both the
mmap and fault paths use this helper, and the bounds checking is
consolidated into a single location.
From source inspection, the most defensible impact is out-of-bounds
access in the callback path, potentially leading to invalid PFN
remaps and crash/DoS.
Fixes: ddd89d0a05 ("vhost_vdpa: support doorbell mapping via mmap")
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260508075821.92656-1-q.h.hack.winter@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e440e07774 ]
vduse_dev_open() looks up struct vduse_dev through the IDR and then
acquires dev->lock only after vduse_lock has been dropped.
This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the
same object from the IDR and free it before the open path locks the
device, leading to a use-after-free.
Close this race by keeping vduse_lock held until dev->lock has been
acquired in the open path, matching the lock ordering already used by
the destroy path.
Fixes: c8a6153b6c ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260508094659.94647-1-q.h.hack.winter@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 606c0826bd ]
pm_runtime_get_sync() increments the runtime PM usage counter even when it
returns an error. meson_spifc_remove() uses it to resume the controller
before disabling runtime PM, but never drops the usage counter again.
Balance the get with pm_runtime_put_noidle() after disabling runtime PM,
matching the teardown pattern used by other SPI controller drivers.
Found by static analysis. I do not have hardware to test this.
Fixes: c3e4bc5434 ("spi: meson: Add support for Amlogic Meson SPIFC")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Link: https://patch.msgid.link/20260609052647.5-1-ruoyuw560@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bade9a3150 ]
Sashiko noticed mlx4 was using whatever random access flags were provided
when IB_MR_REREG_ACCESS is not used. Since IB_MR_REREG_TRANS needs
access_flags it used the random ones which means it doesn't work sensibly
if userspace provides only IB_MR_REREG_TRANS.
Keep track of the current access_flag of the MR and use it if the user
does not specify one.
Also fixup a little confusion around mmr.access, it is the HW access flags
so the convert_access() was missing. But nothing reads this by the time
rereg_mr can happen.
Fixes: 9376932d0c ("IB/mlx4_ib: Add support for user MR re-registration")
Link: https://patch.msgid.link/r/0-v1-29ca7a402625+ddd6-mlx4_rereg_flags_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52416a27aa ]
Don't account the free space in a data relocation space-info sub-group as
usable free space in statfs.
This is misleading as no user allocations can be made in this space-info
sub-group. It is only a target for relocation.
Fixes: f92ee31e03 ("btrfs: introduce btrfs_space_info sub-group")
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f8581c70a ]
set_fan() parses user input with kstrtol() and passes the resulting
value to FAN16_TO_REG() on chips with 16-bit fan support.
Negative fan speeds are not meaningful and should be rejected before
conversion. Worst scenario, one may be able to abuse undefined
behaviour of signed overflow to possibly induce rpm * 2 == 0 in
FAN16_TO_REG(), thus causing a division by zero.
Instead, clamp val < 0 to zero and keep the conversion in its valid
input domain, avoiding unsafe arithmetic in the register conversion
path.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 17d648bf57 ("it87: Add support for the IT8716F")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20260529141839.1639287-1-n.zhandarovich@fintech.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8421e0938 ]
The code that gets the frame buffer mode from OF has 'use after free',
'buffer overrun' and memory leaks.
info->edid_data isn't free if the probe functions fail or if
pd->def_mode is set.
If both the CRT and PANEL are enabled info->edid_data is used after
being freed and is freed twice.
The string returned by of_get_property(np, "mode", &len) is just
written over either the static "640x480-16@60" or the module parameter
string without any regard for the length (which is most likely longer).
Use kstrump() for the OF mode and free everything before freeing 'info.
Fixes: 4295f9bf74 ("video, sm501: add OF binding to support SM501")
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 486f8298b6 ]
In the beginning of the loop, we try to obtain a locked delayed ref head,
if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(),
which can return an error pointer. If the error pointer is -EAGAIN we do
a continue and go back to the beginning of the loop, which will not try
again to call btrfs_select_ref_head() since 'locked_ref' is no longer
NULL but it's ERR_PTR(-EAGAIN), and then we do:
spin_lock(&locked_ref->lock);
against a ERR_PTR(-EAGAIN) value, generating an invalid pointer
dereference.
Fix this by ensuring that 'locked_ref' is set to NULL when
btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count'
as well, to prevent infinite looping. We do this by doing a goto to the
bottom of the loop that already sets 'locked_ref' to NULL and does a
cond_resched(), with an increment to 'count' right before the goto.
These measures were in place before the refactoring in commit 0110a4c434
("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally
lost afterwards.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/ag8ARRwykv8bpJ87@stanley.mountain/
Fixes: 0110a4c434 ("btrfs: refactor __btrfs_run_delayed_refs loop")
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c5671ed81 ]
When FIELD_GET returns 0 for the retry count, subtracting 1 causes
an unsigned integer underflow, resulting in tx_retries becoming a
very large value (0xFFFFFFFF for u32).
Fix by checking if count is non-zero before subtracting 1.
Fixes: 9aecfa754c ("wifi: mt76: mt7921e: report tx retries/failed counts in tx free event")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/20260605113306.3485554-2-ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05e72b6167 ]
When FIELD_GET returns 0 for the retry count, subtracting 1 causes
an unsigned integer underflow, resulting in tx_retries becoming a
very large value (0xFFFFFFFF for u32).
Fix by checking if count is non-zero before subtracting 1.
Fixes: 943e4fb96e ("wifi: mt76: mt7915: report tx retries/failed counts for non-WED path")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/20260605113306.3485554-1-ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29922fdfc2 ]
If we take runnable_avg in max(runnable_avg, util_avg) in cpu_util(), we
should then add or subtract task runnable_avg, but the arithmetic below
is still with task util_avg. This mixes runnable_avg with util_avg which
is incorrect.
Fix by always doing arithmetic with runnable_avg and only take
max(runnable_avg, util_avg) at the last step.
Fixes: 7d0583cf9e ("sched/fair, cpufreq: Introduce 'runnable boosting'")
Signed-off-by: Hongyan Xia <hongyan.xia@transsion.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260605094318.37931-1-hongyan.xia@transsion.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c08d43083 ]
tcm_loop_target_reset is supposed to handle all the LUNs on a target but
it's only doing a TMR_LUN_RESET so only that one LUN is handled. This
will cause us to return early while IOs to other LUNs are still hung in
lower layers. This just removes the target reset handler for the driver
because LIO doesn't support target resets and for the common case where
this is run from the scsi-ml error hamdler we have already tried an
abort and lun reset so waiting again is most likely useless.
Fixes: 1333eee56c ("scsi: target: tcm_loop: Drain commands in target_reset handler")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260530052349.5134-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e161211f1 ]
A mutual CHAP handshake requires target processing of an initiator-sent
CHAP_I identifier. The RFC 3720 specification states:
11.1.4. Challenge Handshake Authentication Protocol (CHAP)
...
CHAP_A=<A> CHAP_I=<I> CHAP_C=<C>
...
Where N, (A,A1,A2), I, C, and R are (correspondingly) the Name,
Algorithm, Identifier, Challenge, and Response as defined in
[RFC1994], N is a text string, A,A1,A2, and I are numbers
CHAP_I parsing currently calls extract_param(), which returns the
@identifier string (stripped of any 0b/0B or 0x/0X prefix) and a @type
which indicates DECIMAL, HEX, or BASE64 encoding (based on any stripped
prefix).
Any HEX encoded CHAP_I string is further processed via:
ret = kstrtoul(&identifier[2], 0, &id);
This is incorrect for two reasons:
* The @identifier string has already been stripped of the 0x/0X prefix,
so skipping the first two bytes omits part of the number.
* The kstrtoul() call specifies a base of 0, which will see
&identifier[2] parsed as a decimal, unless a '0x' or (octal) '0' is
erroneously present at that offset.
Fix this by passing the (zero-offset) identifier string to kstrtoul()
along with a base=16 parameter. Also add an explicit error handler for
BASE64 encoding.
Hex-encoded CHAP_I handling can be testing using the libiscsi EncodedI
test linked below.
Reported-by: Sashiko (gemini/gemini-3.1-pro-preview)
Link: https://sashiko.dev/#/patchset/20260521151121.808477-1-hossu.alexandru%40gmail.com
Link: https://github.com/sahlberg/libiscsi/pull/473
Fixes: 85db739131 ("scsi: target: iscsi: Validate CHAP_R length before base64 decode")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260605122019.24146-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a298c7302e ]
watchdog_register_device() registers wdd->pm_nb when
WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not
remove it. This leaves an embedded notifier block on the PM notifier chain
after the watchdog device has been unregistered.
A later suspend/resume notification can then call watchdog_pm_notifier()
with a stale watchdog_device pointer, or at minimum after wdd->wd_data has
been cleared by watchdog_dev_unregister().
Unregister the PM notifier before tearing down the watchdog device.
Fixes: 60bcd91aaf ("watchdog: introduce watchdog_dev_suspend/resume")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://lore.kernel.org/r/20260601192005.1970805-1-dbgh9129@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b9e8bb81c ]
Having the parent directory locked protects entries from removal
by another thread, but it does *not* protect cursors from being
moved around by lseek() - or freed, for that matter.
Fixes: 6f61076406 ("configfs: Introduce configfs_dirent_lock")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3ec78f8f8 ]
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock.
Fixes: ac39b3ea73 ("firmware loader: let caching firmware piggyback on loading firmware")
Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot
Reported-by: syzbot+e70e4c6f6eee43357ba7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e70e4c6f6eee43357ba7
Link: https://syzkaller.appspot.com/ai_job?id=8b4af9fd-24af-423f-8acb-1159fd34c1a5
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/48b092a5-f49d-48a4-95f4-f65bebfc6bc3@mail.kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7886054b06 ]
If DMA setup fails after allocating the zeropage, the error path frees
the page but leaves espi->zeropage dangling. A subsequent call to
ep93xx_spi_release_dma() sees the non-NULL pointer and frees the page
again.
Clear the pointer after freeing in the error path of
ep93xx_spi_setup_dma().
Fixes: 626a96db11 ("spi/ep93xx: add DMA support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260529-ep93xx-v1-1-9185070ca1fc@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55d339d200 ]
Jumping to mlx5_ib_reg_user_mr() without IB_MR_REREG_TRANS set will use
garbage values for start, length, and iova. Recovering the original mr
parameters for ODP and DMABUF to properly recreate it is too hard in this
flow, so just fail it.
Fixes: ef3642c4f5 ("RDMA/mlx5: Fix error unwinds for rereg_mr")
Link: https://patch.msgid.link/r/1-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03120e1425 ]
The conservative governor documentation incorrectly states that setting
freq_step to 0 will use the default 5% frequency step. In reality, since
at least commit 8e677ce83b ("[CPUFREQ] conservative: fixup governor to
function more like ondemand logic"), freq_step=0 has always caused the
governor to skip frequency updates entirely.
Correct the documentation to reflect the actual behavior: freq_step=0
disables frequency changes by the governor entirely.
Fixes: 2a0e492798 ("cpufreq: User/admin documentation update and consolidation")
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20260603055635.1549943-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63320db6a5 ]
acpi_ipmi_space_handler() takes an extra reference on tx_msg before
checking whether the selected IPMI device is dead. The reference
belongs to the tx_msg_list entry and is normally dropped by
ipmi_cancel_tx_msg() or ipmi_flush_tx_msg() after the message is removed
from the list.
On the dead-device path, the message has not been queued yet, but the
error path still calls ipmi_msg_release() directly. That bypasses
kref_put() and frees tx_msg while the queued-message reference is still
recorded in the kref count.
Take the queued-message reference only after the dead-device check
succeeds, immediately before adding tx_msg to the list.
Fixes: 7b98447722 ("ACPI / IPMI: Add reference counting for ACPI IPMI transfers")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260603163108.2149359-1-dbgh9129@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 705dd6dcbc ]
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Link: https://patch.msgid.link/20260607004129.61345-1-kylebot@openai.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ac35bac70 ]
In the non-frame-pointer version of walk_stackframe, each value read
from the stack is treated as a potential return address and has 0x4
subtracted before being used as the program counter. This was intended
to convert the return address (the instruction after a call) back to
the call site, but it is incorrect:
1. RISC-V has variable-length instructions due to the RVC (compressed
instruction) extension. A call instruction can be either 4 bytes
(regular) or 2 bytes (compressed, e.g. c.jal). Subtracting a fixed
0x4 assumes all call instructions are 4 bytes, which is wrong for
compressed instructions.
2. Stack traces conventionally report return addresses, not call sites.
Other architectures (ARM64, x86, ARM) do not subtract instruction
size from return addresses in their stack unwinding code.
3. The frame-pointer version of walk_stackframe already dropped the
-0x4 offset. Commit b785ec129b ("riscv/ftrace: Add
HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support") replaced "pc =
frame->ra - 0x4" with ftrace_graph_ret_addr(), and the commit
message explicitly noted that "the original calculation, pc =
frame->ra - 4, is buggy when the instruction at the return address
happened to be a compressed inst." The non-FP version was simply
overlooked.
Remove the bogus -0x4 offset to match the FP version and the
conventions used by other architectures.
Fixes: 5d8544e2d0 ("RISC-V: Generic library routines and assembly")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Link: https://patch.msgid.link/20260603115329.791603-2-qirui.001@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b7bd6f548 ]
snd_seq_expand_var_event_at() clamps the number of bytes to copy to the
remaining variable-event length, but passes the original buffer size to
expand_var_event().
For SNDRV_SEQ_EXT_USRPTR events, expand_var_event() copies exactly the
size argument from userspace. On the final chunk, when the remaining
event data is shorter than the caller's buffer, this can read past the
declared event data and can spuriously fail with -EFAULT if the extra
bytes cross an unmapped page.
Pass the clamped length instead. The chained and kernel-backed paths
already reclamp in dump_var_event(), but the user-pointer path handles
the size directly.
Fixes: ea46f79709 ("ALSA: seq: Add snd_seq_expand_var_event_at() helper")
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260606040913.230213-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82d7d0adbc ]
Currently, bpf_lwt_push_ip_encap() does not update skb->transport_header.
When a driver, e.g. ice, reuses the stale skb->transport_header to
offload checksum computation to NIC hardware, VxLAN packets encapsulated
by bpf_lwt_push_encap() helper may be dropped due to incorrect checksum.
Update skb->transport_header in bpf_lwt_push_ip_encap() whenever the
encapsulated packet uses UDP, so checksum offload works correctly.
Fixes: 52f278774e ("bpf: implement BPF_LWT_ENCAP_IP mode in bpf_lwt_push_encap")
Cc: Leon Hwang <leon.huangfu@shopee.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260602150931.49629-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 748835fcb2 ]
With deferrable card binding the sound card driver tries to
get the mclk configuration before it is setup in sai3 node.
Fix this by setting the sai clock config for the audio codec as well.
Fixes: d8f9d81265 ("arm64: dts: imx8mp: Add analog audio output on i.MX8MP TQMa8MPxL/MBa8MPxL")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1521d560b7 ]
Initialize iwmr->access during initial user mem registration so
that it contains a valid value during a subsequent rereg_mr.
Otherwise, a rereg_mr that doesn't set IB_MR_REREG_ACCESS (for
example, one that only changes the PD) ends up clearing the
access flags in HW since iwmr->access is zero-initialized, which
is not intended.
Fixes: 5ac388db27 ("RDMA/irdma: Add support to re-register a memory region")
Link: https://patch.msgid.link/r/20260604154104.4035581-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4385ddd654 ]
Sashiko pointed out an unrelated bug during a previous patch:
https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com
This change fixes the bug by eliminating the cqmr->split field which
was not being set properly and instead just checks the CQ resize
feature flag directly.
The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE
is set, but it was not being set until CQ creation time, which is _after_
CQ memory registration (the only other place where it is referenced).
As a result, it would always be false during MR registration and would
therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2
HW and beyond:
cqmr->shadow = (dma_addr_t)arr[req->cq_pages];
The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal
to iwmr->page_cnt and therefore equal to the size of arr, which would cause
an OOB read by one.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://patch.msgid.link/r/20260602214423.1315105-2-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b2207bc5c ]
Codex pointed out that cm_init_av_by_path() can call cm_set_av_port()
which takes a reference on the cm device, but then can immediately return
error if ib_init_ah_attr_from_path() fails.
Since callers like ib_send_cm_req() put the av on the stack this leaks
that cm device reference.
Re-order cm_init_av_by_path() so it doesn't touch the av until it has done
all its failable work, and then update the av in one shot so it is either
left alone or fully init'd.
Sashiko also pointed out that the cm_destroy_av() prior to
cm_init_av_by_path() is harmful as it leaves the AV broken in the error
case and thus the REJ won't send. Since cm_init_av_by_path() is now atomic
it is safe to delete the cm_destroy_av(). On succees the av from
cm_init_av_for_response() is cleaned up by cm_init_av_by_path(), on
failure the 'goto rejected' guarentees the av is destroyed during
ib_destroy_cm_id().
Fixes: 76039ac909 ("IB/cm: Protect cm_dev, cm_ports and mad_agent with kref and lock")
Link: https://patch.msgid.link/r/0-v1-38292501f539+14f-ib_cm_av_leak_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0f02608fb ]
For GRE flows, validate that the ct master helper (if any) is pptp
before calling nf_ct_gre_keymap_destroy(), so the helper data area
can be accessed safely. Note that only the pptp helper provides a
.destroy callback.
Fixes: e56894356f ("netfilter: conntrack: remove l4proto destroy hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35e21a4dcc ]
This infrastructure is not used anymore after moving ct timeout and
helper to use datapath refcount to track object use.
Revert commit c56716c69c ("netfilter: extensions: introduce extension
genid count") this patch disables all ct extensions (leading to NULL)
for unconfirmed conntracks, when this is only targeted at ct helper and
ct timeout. There is also codebase that dereferences the ct extension
without checking for NULL which could lead to crash.
Fixes: c56716c69c ("netfilter: extensions: introduce extension genid count")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Jiang
Yonghong Song
Aditya Prakash Srivastava
Louis Scalbert
Richard Fitzgerald
longlong yan
Qing Ming
Zhang Tianci
Qihang Tang
Val Packett
Ruoyu Wang
Jason Gunthorpe
Johannes Thumshirn
Nikita Zhandarovich
David Laight
Filipe Manana
Ryder Lee
Bjoern A. Zeeb
Hongyan Xia
Wolfram Sang
Hui Zhu
Luca Leonardo Scorcia
Mike Christie
David Disseldorp
Yuho Choi
Al Viro
Dmitry Vyukov
Felix Gu
Pengjie Zhang
Kyle Zeng
Rui Qi
HyeongJun An
Tristan Madani
Leon Hwang
Alexander Stein
Jacob Moroni
Pablo Neira Ayuso