commit 4e1a53892b upstream.
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected.
Fixes: b4b01b4995 ("drm/virtio: add edid support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260620-b4-disp-22bba7bf-v1-1-b95924cee742@proton.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac11060c6d upstream.
The mode-setting pipeline can disabled damage clippings for a commit
by setting ignore_damage_clips in struct drm_plane_state. The commit
will then do a full display update.
Test the flag in DCN code and do a full update in DCN code if it has
been set.
Commit 35ed38d582 ("drm: Allow drivers to indicate the damage helpers
to ignore damage clips") introduced ignore_damage_clips to selectively
ignore damage clipping in certain framebuffer changes. This driver does
not do that, but DRM's damage iterator will soon rely on the flag.
Therefore supporting it here as well make sense for consistency.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 35ed38d582 ("drm: Allow drivers to indicate the damage helpers to ignore damage clips")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zackr@vmware.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a24019f648)
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb52249fbb upstream.
The valid event ids go from 0 to KFD_SIGNAL_EVENT_LIMIT
allocate_event_notification_slot has an option to specify
an event id to allocate at, used by CRIU. We weren't checking
the bounds on that value.
Check them.
v2: Lower bounds check is unecessary because of idr_alloc
already rejecting negative numbers. Upper bounds check should
be KFD_SIGNAL_EVENT_LIMIT since the signal mode mappings might
not yet exist
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6853f1f6cb)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f896e86273 upstream.
r100_copy_blit() copies BOs as 1024-pixel-wide ARGB8888 blits, so one
GPU page becomes one blit row. Large copies are split into chunks of at
most 8191 rows.
The kernel register header names the packet coordinate dwords SRC_Y_X
and DST_Y_X. In the BITBLT_MULTI description in
R5xx_Acceleration_v1.5.pdf docs, these correspond to [SRC_X1 | SRC_Y1]
and [DST_X1 | DST_Y1], which are signed 13-bit coordinates in the
-8192..8191 range. The old code kept SRC/DST_PITCH_OFFSET at the BO base
and used SRC_Y_X/DST_Y_X as the chunk address, so large BO moves could
exceed that coordinate range.
Compute per-chunk SRC/DST_PITCH_OFFSET bases and emit zero source and
destination coordinates. r100_copy_blit() already packs
SRC/DST_PITCH_OFFSET as pitch plus base offset, so large chunk addresses
belong there rather than in the coordinate fields.
This fixes Prison Architect corruption with 4096x4096 mipped textures
after they are evicted to GTT under memory pressure on RV530.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/work_items/6716
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pavel Ondračka <pavel.ondracka@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 87be26aee7)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3027973f6 upstream.
In nvkm_acr_oneinit(), nvkm_kmap(acr->wpr) is invoked unconditionally
at line 309 to obtain a mapping reference. Additionally, when both
acr->wpr_fw and acr->wpr_comp are present, a second nvkm_kmap() is
called inside the conditional block. Both mappings are expected to be
released by nvkm_done(acr->wpr) at line 320 before the function returns
successfully.
However, when a mismatch is detected during the loop within the
conditional block, the function returns -EINVAL at line 318 without
calling nvkm_done(). This results in a leak of the kmap reference(s)
acquired earlier.
Fix the issue by invoking nvkm_done(acr->wpr) prior to the early return
to ensure proper release of the mapping references.
Fixes: 22dcda45a3 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260606155606.77593-1-vulab@iscas.ac.cn
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab99ead646 upstream.
nouveau_uvmm_vm_bind_ucopy() and nouveau_exec_ucopy() place their error
cleanup labels in allocation order rather than reverse allocation order.
On a u_memcpya() failure for in_sync.s, the goto to err_free_ops (or
err_free_pushs) frees the first allocation and then falls through to
err_free_ins, which calls u_free() on args->in_sync.s.
Since args->in_sync.s still holds the ERR_PTR returned by the failed
u_memcpya(), and ERR_PTR values are not caught by ZERO_OR_NULL_PTR(),
kvfree() proceeds to dereference it, which can result in a kernel oops.
A failure for out_sync.s instead jumps to err_free_ins and skips freeing
the first allocation, leading to a memory leak.
Fix by swapping the cleanup label order so resources are freed in the
correct reverse allocation sequence.
Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881484D91A6F80271415F71AF1A2@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84c4c36acd upstream.
Add a minimum-length check for the AMDGPU_CHUNK_ID_CP_GFX_SHADOW chunk in
amdgpu_cs_pass1(), matching the gate already present for the IB, FENCE and
BO_HANDLES chunk types.
The CP_GFX_SHADOW case previously shared a bare break with the dependency
and syncobj chunk types, which do not dereference a fixed-size struct. When
userspace submits this chunk with length_dw == 0, vmemdup_array_user() is
called with size 0 and returns ZERO_SIZE_PTR, which passes the IS_ERR()
check. amdgpu_cs_p2_shadow() then dereferences chunk->kdata as a struct
drm_amdgpu_cs_chunk_cp_gfx_shadow (reading shadow->flags), faulting on the
ZERO_SIZE_PTR and causing a NULL-pointer dereference.
This is reachable by an unprivileged process in the render group. Reject
undersized chunks with -EINVAL during pass1 so the bad submission is
rejected before pass2 ever dereferences the data.
Fixes: ac9287055f ("drm/amdgpu: add gfx shadow CS IOCTL support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7f61b2eef7)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32bd35f068 upstream.
UVD 4.x and older can only access MSG, FEEDBACK buffers from a
specific 256M VRAM segment that the VCPU BO is also located in.
We already modify all placements of the given BO to ensure
the BO is placed within this segment.
Previously, it always assumed that the VCPU segment is
the first 256M of VRAM, even though under some conditions
the VCPU BO could be allocated outside this segment,
which made UVD non-functional as the BOs were
not inside the same segment as the UVD VCPU BO.
Solve that by using the segment where the VCPU BO actually is.
This fixes an issue with UVD failing to initialize on SI/CIK
when resizable BAR is enabled and the VCPU BO is allocated
in a different segment.
v2:
- For other BOs, keep using the same UVD segment as before.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/3851
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbfd4d3fc2)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b89ba3dba upstream.
Three sideband reply parsers read 16-bit fields as:
val = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
and check bounds only after the fact. When idx == raw->curlen,
raw->msg[idx+1] reads one byte past the received message data into
the following struct fields (curchunk_len, curchunk_idx, curlen).
Affected functions:
- drm_dp_sideband_parse_enum_path_resources_ack()
full_payload_bw_number and avail_payload_bw_number fields
- drm_dp_sideband_parse_allocate_payload_ack()
allocated_pbn field
- drm_dp_sideband_parse_query_payload_ack()
allocated_pbn field
Fix by using a single combined check (idx + 2 > curlen) before each
2-byte read. Since the check is strictly tighter than idx > curlen,
no separate step is needed.
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added fixes tag]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260510203128.2884846-1-ashutoshdesai993@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55bd5e685b upstream.
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection.
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260410041901.2438960-1-ashutoshdesai993@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a8f537f5a upstream.
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added missing fixes tag]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260510201733.2882224-1-ashutoshdesai993@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d8b08844c upstream.
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks.
Link: https://lore.kernel.org/all/fbde0659-78f3-46e4-98cf-d832f765a18b@ideasonboard.com/
Cc: stable@vger.kernel.org # 6.1.x
Fixes: e19233955d ("drm/bridge: Add Cadence DSI driver")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260505134705.188661-2-ivitro@gmail.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2d66a03386 ]
tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which
drops and reacquires the socket lock. Its error path tries to decide
whether msg_tx names the local temporary message by comparing it with
the current value of psock->cork.
This comparison is unsafe when two threads send on the same socket:
Thread A Thread B
msg_tx = psock->cork
sk_msg_alloc() fails
sk_stream_wait_memory()
releases the socket lock acquires the socket lock
completes the cork
psock->cork = NULL
frees the cork
reacquires the socket lock
msg_tx != psock->cork
sk_msg_free(msg_tx)
The stale cork is therefore mistaken for the local temporary message
and freed again. KASAN reported:
BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50
Read of size 4 at addr ffff88810c908800 by task poc/90
Call Trace:
sk_msg_free+0x49/0x50
tcp_bpf_sendmsg+0x14f5/0x1cc0
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 89:
__kasan_kmalloc+0x8f/0xa0
tcp_bpf_sendmsg+0x16b3/0x1cc0
Freed by task 91:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
tcp_bpf_sendmsg+0xec3/0x1cc0
msg_tx can only name the stack-local tmp or the shared cork. Check for
tmp directly so a changed psock->cork cannot turn a shared message into
an apparent local one.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/87fr18lmzo.fsf%40cloudflare.com/
Link: https://lore.kernel.org/netdev/20260719161630.2901208-1-nicoyip.dev%40gmail.com/ [v1]
Link: https://patch.msgid.link/20260724103856.3399001-1-nicoyip.dev@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 440e274da4 ]
In raw6_icmp_error(), raw_v6_match() is called with inet6_iif(skb) passed
to both the 'dif' and 'sdif' arguments. This is a copy-paste or typo error,
as the last argument should represent the secondary interface index (sdif).
This mismatch breaks ICMPv6 error handling for IPv6 raw sockets in VRF
(Virtual Routing and Forwarding) environments. When a raw socket is bound
to a VRF master device, raw_v6_match() fails to find a match because it is
not given the correct sdif value, causing the socket to miss relevant
ICMPv6 error notifications.
Fix this by properly passing inet6_sdif(skb) as the last argument to
raw_v6_match().
Fixes: 5108ab4bf4 ("net: ipv6: add second dif to raw socket lookups")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260717143230.1836-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffb1873b2d ]
The IEEE 802.1Qaz standard defines that bandwidth allocation percentages
only apply to Enhanced Transmission Selection (ETS) traffic classes.
For STRICT and VENDOR transmission selection algorithms, bandwidth
percentage values are not applicable.
Currently for non-ETS 100 bandwidth is being reported for all traffic
classes in the get operation due to hardware limitation, regardless of
their TSA type.
Fix this by reporting 0 for non-ETS traffic classes.
Fixes: 820c2c5e77 ("net/mlx5e: Read ETS settings directly from firmware")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260717075125.1244877-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d12956d083 ]
esw_egress_acl_vlan_create() hardcodes num_dest=0 in its
mlx5_add_flow_rules() call. When invoked from the non-bond path
fwd_dest is NULL and num_dest=0 is correct. When invoked from
esw_acl_egress_ofld_rules_create() during a bond event, fwd_dest is
non-NULL and flow_act.action carries MLX5_FLOW_CONTEXT_ACTION_FWD_DEST,
but _mlx5_add_flow_rules() rejects a non-NULL dest pointer paired with
dest_num<=0 and returns -EINVAL. The error propagates as
"configure slave vport egress fwd, err(-22)". The passive vport's egress
ACL table ends up with its flow groups allocated but no FTEs, so
prio-tagged packets are not popped and bond failover is broken on
prio_tag_required devices.
Fix by passing fwd_dest ? 1 : 0 as num_dest to match the actual number
of destinations supplied.
Fixes: bf773dc0e6 ("net/mlx5: E-Switch, Introduce APIs to enable egress acl forward-to-vport rule")
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260717073306.1242399-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b536db8fb ]
QRTR keeps its entire port and node state in module-global variables
that are not partitioned per network namespace: qrtr_local_nid is a
single global node id (always 1) and qrtr_ports is a single global
xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that
global state with no network-namespace check, and qrtr_create() places
no restriction on the namespace a socket is created in.
As a result an unprivileged process that creates an AF_QIPCRTR socket
in a separate network namespace, e.g. via
unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams -
including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR
sockets owned by another namespace, and vice versa. The receiving
socket sees such a message as coming from node id 1, indistinguishable
from a legitimate local client, breaking the isolation that network
namespaces are expected to provide.
QRTR is a transport to global hardware endpoints (the modem and other
remote processors) and has no per-namespace semantics; its in-kernel
name service already creates its socket in init_net only. Confine the
socket family to the initial network namespace, as other
non-namespace-aware socket families do (see llc_ui_create() and the
ieee802154 socket code).
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Link: https://patch.msgid.link/20260716154319.3297699-1-qwe.aldo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe0c002928 ]
rss_indir_user and rss_hkey_user are allocated and filled in
__set_rss_rxfh() when the user configures RSS via ethtool, but
nothing ever reads them. hinic_get_rxfh() fetches the state from
the device, and the hardware is programmed from the original
indir/key arguments. These buffers only leaked on driver unload.
Drop the unused allocations, memcpys, and struct fields.
Fixes: 4fdc51bb4e ("hinic: add support for rss parameters with ethtool")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260722025353.328179-1-chenguang.zhao@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 543adf0721 ]
Several fields in struct ppp can be read or updated concurrently
from multiple CPUs without synchronization, causing data races:
1. ppp->mru is read concurrently in ppp_receive_nonmp_frame() while
being updated via PPPIOCSMRU ioctl. Protect ppp->mru updates in
PPPIOCSMRU with ppp_recv_lock(ppp).
2. PPPIOCGFLAGS reads ppp->flags, ppp->xstate, and ppp->rstate
unlocked. Wrap the read in ppp_lock(ppp) to get a consistent
snapshot.
3. ppp->debug is updated via PPPIOCSDEBUG and read concurrently on
fast paths. Annotate reads with READ_ONCE() and writes with
WRITE_ONCE().
4. ppp->last_xmit and ppp->last_recv are updated on TX/RX data paths
and read via PPPIOCGIDLE32 / PPPIOCGIDLE64 ioctls. Annotate with
WRITE_ONCE() / READ_ONCE() and use max() to handle jiffies
subtraction.
5. ppp->npmode[] is updated via PPPIOCSNPMODE and read on TX/RX
paths. Annotate with WRITE_ONCE() / READ_ONCE().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260722101605.2868548-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42fcb213e5 ]
PPP channels using chan->direct_xmit prepend the PPP header to a skb and
call dev_queue_xmit() directly. In this mode the skb does not need to be
linear, but the PPP netdevice currently does not advertise
scatter-gather features, causing unnecessary linearization and
preventing GSO.
Enable NETIF_F_SG and NETIF_F_FRAGLIST on PPP devices. In case a linear
buffer is required (PPP compression, multilink, and channels without
direct_xmit), call skb_linearize() explicitly.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260129012902.941-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 543adf0721 ("ppp: annotate data races in ppp_generic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95d0d094ba ]
For PPPoE, PPTP, and PPPoL2TP, the start_xmit() function directly
forwards packets to the underlying network stack and never returns
anything other than 1. So these interfaces do not require a qdisc,
and the IFF_NO_QUEUE flag should be set.
Introduces a direct_xmit flag in struct ppp_channel to indicate when
IFF_NO_QUEUE should be applied. The flag is set in ppp_connect_channel()
for relevant protocols.
While at it, remove the usused latency member from struct ppp_channel.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250301135517.695809-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 543adf0721 ("ppp: annotate data races in ppp_generic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 853e164c2b ]
When Linux forwards a packet and needs to generate an ICMP error,
icmp_route_lookup() performs a reverse-path relookup. For non-local
destinations, it performs a decoy lookup to find the expected egress
interface (rt2->dst.dev) before validating the path with ip_route_input().
Currently, the decoy flow structure (fl4_2) only sets .daddr = fl4_dec.saddr,
leaving .saddr, .flowi4_dscp, .flowi4_proto, .flowi4_mark, .flowi4_oif,
.fl4_sport, .fl4_dport, and .flowi4_uid zeroed out.
When policy routing rules (such as ip rule add from $SRC lookup 100, or
dscp/fwmark/ipproto/port rules, or VRF bindings) are configured:
1. The decoy lookup fails to match the policy rule because saddr and other
key flow selectors are missing in fl4_2.
2. It resolves a route using the default table instead, returning an incorrect
egress netdev.
3. Passing the wrong netdev to ip_route_input() causes strict reverse-path
filtering (rp_filter=1) to fail, logging false-positive "martian source"
warnings and causing the relookup to fail.
Fix this by initializing fl4_2 from fl4_dec and:
- Swapping source/destination IP addresses.
- Swapping L4 ports for transport protocols with ports (TCP, UDP, SCTP, DCCP)
so port-based policy routing matches correctly. Non-port protocols (such as
ICMP or GRE) leave the flowi_uli union fields intact to prevent corruption.
- Setting .flowi4_oif = l3mdev_master_ifindex(route_lookup_dev) to ensure
VRF routing tables are respected.
- Setting .flowi4_flags |= FLOWI_FLAG_ANYSRC to allow output route lookups
for non-local source IP addresses.
- Using __ip_route_output_key() instead of ip_route_output_key() for fl4_2
so that raw FIB routing is used without triggering spurious XFRM policy
lookups on the decoy flow (the actual XFRM lookup is performed later using
fl4_dec).
Fixes: 415b3334a2 ("icmp: Fix regression in nexthop resolution during replies.")
Reported-by: Muhammad Ziad <muhzi100@gmail.com>
Closes: https://lore.kernel.org/netdev/CAOAwikA60AYKdFr_UDLyja3oU4hqyAE7uFZWqum5uRdaQsgRYg@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260722104236.2938082-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c99db3a20 ]
stmmac_mac_link_down() clears the MAC's transmit and receive enable bits.
stmmac_mac_link_up() is expected to set them again through
stmmac_mac_set(..., true), but it first switches on the negotiated speed
and returns early for a speed the switch does not list. The MAC is then
left gated off.
The speed selection is split into three switches, keyed on the interface.
The generic branch -- taken for everything that is neither USXGMII nor
XLGMII, so including PHY_INTERFACE_MODE_10GBASER -- lists only SPEED_2500,
SPEED_1000, SPEED_100 and SPEED_10.
MGBE on Tegra234 runs 10GBASE-R into an Aquantia AQR113C. That PHY does
rate matching, so phylink_link_up() replaces the media speed with the
MAC-side interface speed before calling into the MAC:
case RATE_MATCH_PAUSE:
speed = phylink_interface_max_speed(link_state.interface);
duplex = DUPLEX_FULL;
The driver is therefore called as
stmmac_mac_link_up(interface=10GBASER, speed=10000, duplex=1)
which falls through to "default: return;". The interface stops passing
traffic after the first link flap.
The failure is easy to misread. The link still comes up, because the PHY
is polled over MDIO and needs no MAC, so the interface reports carrier 1
at the media speed. The DMA is untouched, so its start bits stay set and
descriptors are still consumed. Only the MAC itself is gated off: the
receiver counts nothing (mmc_rx_framecount_gb stops advancing, RE is 0)
and nothing reaches the wire (TE is 0). The interface survives boot only
because stmmac_hw_setup(), called from ndo_open, enables the MAC
unconditionally -- so the problem appears only once the cable has been
unplugged and plugged back in, and "ip link set dev <ethX> down && ip
link set dev <ethX> up" appears to fix it.
The interface is not what the speed bits depend on: with the single
exception of 2.5G, which is selected through the XGMII block on USXGMII
and through the regular speed bits otherwise, each speed maps to one
field of struct mac_link. The per-interface switches are speed
validation, and phylink already validates the speed against
priv->hw->link.caps. So collapse the three switches into one keyed on the
speed alone, keeping the interface test only for the 2.5G case. This
covers 10G on 10GBASE-R, and equally 5G, and 1G/100/10 on USXGMII, all of
which hit "default: return;" today.
A core that does not support a speed leaves the corresponding mac_link
field at 0, and phylink will not offer it that speed in the first place.
For dwxgmac2 at 10G, link.xgmii.speed10000 is XGMAC_CONFIG_SS_10000,
which is 0 and is the correct speed selection for a 10GBASE-R MAC: ctrl
then equals old_ctrl, the register write is skipped, and execution
reaches stmmac_mac_set(..., true).
Log an error in the default case, since a speed with no entry here leaves
the MAC disabled and the symptom does not point at the cause.
Fixes: d8ca113724 ("net: stmmac: tegra: Add MGBE support")
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: vadik likholetov <vadikas@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713074911.30090-1-vadikas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5536d7c843 ]
The basic flow parser in tc_add_basic_flow() does not validate match
keys before proceeding. Unsupported offload configurations such as
partial protocol masks, non-IPv4 network proto, or non-TCP/UDP transport
proto are silently accepted instead of returning -EOPNOTSUPP.
Add validation to return -EOPNOTSUPP early for:
- No network or transport proto present in the key
- Partial protocol mask (only full mask supported)
- Network proto is not IPv4
- Transport proto is not TCP or UDP
Each rejection includes an extack message so the user knows which part
of the match is unsupported.
Also propagate -EOPNOTSUPP from tc_add_basic_flow() in tc_add_flow()
by returning it directly rather than using break. The break was silently
discarding the error for FLOW_CLS_REPLACE operations where entry->in_use
is already true, causing tc_add_flow() to return 0 (success) for
unsupported replace requests.
Fixes: 425eabddaf ("net: stmmac: Implement L3/L4 Filters using TC Flower")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260714023716.29865-4-muhammad.nazim.amirul.nazle.asmade@altera.com
Reviewed-by: Jakub Raczynski <j.raczynski@samsung.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f29cd8a8e ]
Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied
MTU values but only enforce a minimum bound, not a maximum. When a user
sets the MTU to a value exceeding U16_MAX (65535), it passes validation
but is silently truncated when assigned to u16 fields l->mtu and
l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000)
truncate to 0, causing a division by zero in tipc_link_set_queue_limits()
which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing
values (e.g. 65537-131071) produce small incorrect MTU values, resulting
in link malfunction behaviors.
Crash stack (triggered as unprivileged user via user namespace):
tipc_link_set_queue_limits net/tipc/link.c:2531
tipc_link_create net/tipc/link.c:520
tipc_node_check_dest net/tipc/node.c:1279
tipc_disc_rcv net/tipc/discover.c:252
tipc_rcv net/tipc/node.c:2129
tipc_udp_recv net/tipc/udp_media.c:392
Two independent paths lack the upper bound check:
1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET)
2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET)
Fix both by rejecting MTU values above U16_MAX.
Fixes: 901271e040 ("tipc: implement configuration of UDP media MTU")
Reported-by: AutonomousCodeSecurity@microsoft.com
Closes: https://lore.kernel.org/all/CAB8m9WgETt0AjmFwE=F-CKjGXsK6_WDv0=kbYRcC8-noo+amnA@mail.gmail.com
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260714041541.307702-1-blbllhy@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88c2651531 ]
The block range calculation in ifs_clear_range_dirty() is incorrect when
partially clearing a range in a folio. We cannot clear the dirty bit of
the first block or the last block if the start or end offset is not
blocksize-aligned. This has not yet caused any issues since we always
clear a whole folio in iomap_writeback_folio().
Fix this by rounding up the first block to blocksize alignment, and
calculate the last block by rounding down (using truncation). Correct
the nr_blks calculation accordingly.
Fixes: 4ce02c6797 ("iomap: Add per-block dirty state tracking to improve performance")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260714082325.325163-2-yi.zhang@huaweicloud.com
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34a71f5361 ]
vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the
outer header, but for a Geneve-encapsulated packet the device can set
them based on the inner header instead, signalled by the
VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the
function never skips the outer encapsulation, this mismatch triggers:
- BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer
protocol is UDP (Geneve), not TCP.
- BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner
IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa).
Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the
function cannot locate the inner header it would need to parse. Also
convert the remaining BUG_ON()s in this function to return 0
defensively.
Fixes: 45dac1d6ea ("vmxnet3: Changes for vmxnet3 adapter version 2 (fwd)")
Signed-off-by: Harshaka Narayana <harshaka.narayana@broadcom.com>
Reviewed-by: Ronak Doshi <ronak.doshi@broadcom.com>
Reviewed-by: Sankararaman Jayaraman <sankararaman.jayaraman@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260713140915.3381715-1-harshaka.narayana@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e04823c12 ]
sctp_auth_chunk_verify() returns true unconditionally when
chunk->auth_chunk is NULL, silently skipping authentication.
This is incorrect when:
1. skb_clone() failed in the BH receive path, leaving auth_chunk
NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new
connections, so the early sctp_auth_recv_cid() check cannot
catch this.
2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never
called and auth_chunk remains NULL.
Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL:
if authentication is required, return false to drop the chunk;
otherwise continue normally.
Fixes: bbd0d59809 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260721015532.120157-2-l1138897701@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da2c6bcc5e ]
Before converting to the phylink interface, the init function would have
set a non-reserved I/F mode in the maccfg2 register. After converting to
phylink, 0 is written as mode, which is a reserved value (although it's
the hardware default). Without a valid mode, a SGMII link is never
established between the MAC and the PHY and thus .link_up() is never
called which could set the correct mode according to the actual speed.
Fix it by setting the maximum speed of the phy_interface_t in use in
.mac_config() - just like the driver did before the phylink conversion.
Fixes: 5d93cfcf73 ("net: dpaa: Convert to phylink")
Suggested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260717132401.2653252-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcf15eaf56 ]
When an HSR master device is brought UP, it auto-adds VLAN 0 via
vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B).
If a slave device is later unregistered while HSR is active (e.g., during
netns cleanup or interface destruction), hsr_del_port() is called to
detach the slave port from the HSR master. However, hsr_del_port() currently
does not delete the VLAN IDs that were synced to the slave device by HSR.
As a result, the slave device retains a refcount on VID 0 (and any other
synced VLANs). When the slave device is destroyed, its vlan_info /
vlan_vid_info structure remains allocated, leading to a memory leak.
Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in
hsr_del_port() before unlinking slave A or slave B ports, matching the
propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid()
and the cleanup behavior in bonding and team drivers.
Fixes: 1a8a63a530 ("net: hsr: Add VLAN CTAG filter support")
Reported-by: syzbot+456957213f32970c0762@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a4cb6ca.57639fcc.86d58.000b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/20260721101240.995597-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43171c97e4 ]
There is a bug in all range dumps that rely on br_vlan_can_enter_range()
when the PVID is a range starting VLAN, all following VLANs that match
its flags can enter the range, but when the range is filled in only the
PVID VLAN is dumped and the rest of the range is discarded because
br_vlan_fill_vids() checks for the PVID flag. Since the PVID VLAN can
be only one, we need to break ranges around it, the best way to do that
consistently for all is to alter br_vlan_can_enter_range() to take into
account the PVID and return false to break the range when it's matched.
Before the fix:
$ ip l add br0 type bridge vlan_filtering 1
$ ip l add dumdum type dummy
$ ip l set dumdum master br0
$ ip l set br0 up
$ ip l set dumdum up
$ bridge vlan add dev dumdum vid 1 pvid untagged master
$ bridge vlan add dev dumdum vid 2 untagged master
$ bridge vlan show dev dumdum # use legacy dump to show all vlans
port vlan-id
dumdum 1 PVID Egress Untagged
2 Egress Untagged
$ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN)
port vlan-id
dumdum 1 PVID Egress Untagged
state forwarding mcast_router 1
VLAN 2 is missing, and if there are more matching VLANs afterwards
they'd be missing too.
After the fix:
[ same setup steps ]
$ bridge vlan show dev dumdum
port vlan-id
dumdum 1 PVID Egress Untagged
2 Egress Untagged
$ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN)
port vlan-id
dumdum 1 PVID Egress Untagged
state forwarding mcast_router 1
2 Egress Untagged
state forwarding mcast_router 1
Fixes: 0ab5587951 ("net: bridge: vlan: add rtm range support")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260721140922.682265-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53969d704f ]
amt_multicast_data_handler(), amt_membership_query_handler() and
amt_update_handler() rewrite the ethernet header of the decapsulated skb
in place (eth->h_proto, eth->h_dest and, for the query, also
eth->h_source) before handing it up the stack. The skb head may be
shared, for example when a packet tap has cloned it on the underlay
interface, so writing through it corrupts the other reader's copy.
Call skb_cow_head() before the rewrite so the head is private. It is
placed before the pointers into the head are (re-)derived, so a
reallocation caused by the copy is picked up by those derivations.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-3-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3656a79f94 ]
Several AMT receive and transmit paths cache a pointer into the skb head
(ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call
a helper that can reallocate that head before the cached pointer is used
again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(),
iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all
free the old head and move the data, so a pointer taken before the call
dangles afterwards and the later access is a use-after-free of the freed
head.
The affected sites are:
amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads
iph->saddr.
amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/
ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address.
amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(),
then writes the L2 header.
amt_membership_query_handler() caches the AMT header, the outer and
inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several
pulls, then reads and writes them.
amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache
ip_hdr()/ipv6_hdr() and the current group record and read the record
count from the report header inside the record loop, across the
*_mc_may_pull() calls.
amt_update_handler() caches ip_hdr() and the AMT membership-update
header before pskb_may_pull(), iptunnel_pull_header(),
ip_mc_check_igmp() and the report handler, then reads iph->daddr and
amtmu->nonce / amtmu->response_mac.
Fix each site by either snapshotting the scalar that is used after the
pull before the first pull runs, or re-deriving the header pointer from
the skb after the last pull that can move the head. Values that are
stable across the pull (source and group address, the response MAC and
nonce, the record count, the outer source MAC) are snapshotted; pointers
that are written through or read repeatedly are re-derived.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e9db06265 ]
mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after
checking HE support, then dereference the HE PHY capability returned by
mt76_connac_get_he_phy_cap(). That helper can return NULL when no
capability entry matches the vif type.
Fetch the capability before appending the TLV and skip the HE-specific
setup when no matching capability is available.
Fixes: e6d557a78b ("mt76: mt7915: rely on mt76_connac_get_phy utilities")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260620155332.81120-1-ruoyuw560@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher
Bryam Vargas
WenTao Liang
Thomas Zimmermann
David Francis
Pavel Ondračka
Joonas Lahtinen
Junrui Luo
Mario Limonciello
Timur Kristóf
Ashutosh Desai
Vitor Soares
Sergey Shtylyov
Chengfeng Ye
Marcin Szycik
Li RongQing
Alexei Lazar
Yael Chemla
Aldo Ariel Panzardo
Chenguang Zhao
Eric Dumazet
Qingfang Deng
Suman Ghosh
vadik likholetov
Nazim Amirul
Cen Zhang (Microsoft)
Zhang Yi
Harshaka Narayana
Qing Luo
Michael Walle
Nikolay Aleksandrov
Michael Bommarito
Shelley Yang
Lorenzo Bianconi
Ruoyu Wang