Commit Graph
1400653 Commits
Author SHA1 Message Date
Lijo Lazar 067e46a36b drm/amd/pm: Add message control for SMUv12
Initialize smu message control in SMUv12 SOCs.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10 14:08:11 -05:00
Lijo Lazar 6d74c9ff6a drm/amd/pm: Add message control for SMUv11
Initialize smu message control in SMUv11 SOCs.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10 14:08:08 -05:00
Lijo Lazar 4f379370a4 drm/amd/pm: Add smu message control block
Add message control block to abstract PMFW message protocol. Message
control block primarily carries message config which is set of register
addresses and message ops which abstracts the protocol of sending messages.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10 14:08:02 -05:00
Xiaogang Chen ca5d4db8db drm/amdgpu: Use correct address to setup gart page table for vram access
Use dst input parameter to setup gart page table entries instead of using fixed
location.

Fixes: 237d623ae6 ("drm/amdgpu/gart: Add helper to bind VRAM pages (v2)")
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10 14:06:39 -05:00
YuBiao Wang 39c21b8111 drm/amdgpu: Skip loading SDMA_RS64 in VF
VFs use the PF SDMA ucode and are unable to load SDMA_RS64.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Signed-off-by: Victor Skvortsov <Victor.Skvortsov@amd.com>
Reviewed-by: Gavin Wan <gavin.wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10 14:06:33 -05:00
Peter Colberg 38a0f4cf8c Revert duplicate "drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces"
This reverts commit 22a36e660d once,
which was merged twice due to an incorrect backmerge resolution.

Fixes: ce0478b02e ("Merge tag 'v6.18-rc6' into drm-next")
Signed-off-by: Peter Colberg <pcolberg@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 15:18:13 -05:00
Mario Limonciello (AMD) 6a23e7b433 drm/amd: Clean up kfd node on surprise disconnect
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.

This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.

Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:43:23 -05:00
Mukesh Ogare 17de472698 drm/radeon: convert UVD v1.0 logging to drm_* helpers
Replace legacy DRM_ERROR()/DRM_INFO() logging in the UVD v1.0 code
with drm_err() and drm_info() helpers that take a struct drm_device.

Using drm_* logging provides proper device context in dmesg, which is
important for systems with multiple DRM devices, and aligns the radeon
driver with current DRM logging practices.

No functional change intended.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukesh Ogare <mukeshogare871@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:43:13 -05:00
Hawking Zhang 5e3f50fda2 drm/amdgpu: Extend psp_skip_tmr for bare-metal and sriov
In SRIOV, guest drivers no longer setup/destory
VMR starting from mp0 v11_0_7.

In bare-metal, if boot-time TMR is enabled, some
generation (e.g., mp0 v13_0_x) don’t need runtime
TMR allocation but still require SETUP_TMR command
with tmr address 0 for backward compatibility.
some newer generations require neither SETUP_TMR nor
DESTROY_TMR and will return errors if they are sent.
Driver relies on boot_time_tmr and autoload_supported
to handle these cases correctly.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:43:09 -05:00
Philip Yang 698fa62f56 drm/amdgpu: Add helper to alloc GART entries
Add helper amdgpu_gtt_mgr_alloc/free_entries, define
GART_ENTRY_WITHOUT_BO_COLOR color for GART node not allocated with GTT
bo, then amdgpu_gtt_mgr_recover skip those mm_node.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:42:53 -05:00
Lijo Lazar ec9243d1b4 drm/amd/pm: Return right size for gpuboard metrics
Change to switch style checks and return the correct size for gpu board
metrics.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:42:46 -05:00
Ben Dooks c812460e69 drm/radeon: fix signed v unsigned print formats
Fix several places where %ld or %d has been used in place of
%lu or %u.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:42:41 -05:00
Lu Yao 2f2a72de67 drm/amdgpu: fix drm panic null pointer when driver not support atomic
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.

Fixes: fe151ed7af ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:41:46 -05:00
Pratik Vishwakarma c7fc0f3723 drm/amd: Enable SMU 15_0_0 support
Add SMU 15_0_0

v2: rebase (Alex)
v3: fix clang build (Alex)

Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:41:42 -05:00
Pratik Vishwakarma a68654bfb7 drm/amd: Enable SMU 15_0_0 firmware headers
Add SMU 15_0_0 firmware headers

v2: squash in updates (Alex)

Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:41:38 -05:00
Pratik Vishwakarma 52cd9bc47f drm/amd: Enable SMUIO 15_0_0 support
Add SMUIO 15_0_0.

Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:41:34 -05:00
Alex Deucher 65653210ed drm/amdgpu: Add THM 15.0.0 headers
Add headers for THM 15.0.0.

v2: squash in updates (Alex)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:41:30 -05:00
Alex Deucher 29f560a523 drm/amdgpu: add SMUIO 15.0.0 headers
Add headers for SMUIO 15.0.0.

v2: squash in updates (Alex)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:41:25 -05:00
Philip Yang fc1366016a drm/amdgpu: Fix gfx9 update PTE mtype flag
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:40:45 -05:00
Lijo Lazar 0c0dd10062 drm/amd/pm: Use driver table for board temperature
GPU board and Baseboard temperatures come from system metrics table.
Driver keeps separate metrics table for both. Use the new driver table
structure to represent them.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:40:42 -05:00
Lijo Lazar 34d6599748 drm/amd/pm: Use cached gpu metrics table
If cached gpu metrics table is available, return it directly. Also,
deprecate gpu_metrics_table variables as they are no longer used.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:40:40 -05:00
Lijo Lazar 618c144145 drm/amd/pm: Use driver table structure in smuv14
Use driver table structure for gpu metrics in smuv14. The default cache
interval is set at 5ms.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:40:37 -05:00
Lijo Lazar e3e4f03f25 drm/amd/pm: Use driver table structure in smuv13
Use driver table structure for gpu metrics in smuv13. The default cache
interval is set at 5ms.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:40:32 -05:00
Lijo Lazar f8e8d7da25 drm/amd/pm: Use driver table structure in smuv12
Use driver table structure for gpu metrics in smuv12. The default cache
interval is set at 5ms.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:40:28 -05:00
Lijo Lazar d1010ca49b drm/amd/pm: Use driver table structure in smuv11
Use driver table structure for gpu metrics in smuv11. The default cache
interval is set at 5ms.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-08 11:40:15 -05:00
Tom St Denis 5e213a985d drm/amd/amdgpu: Port over some missing registers and bits from GC 10.1 to 10.3 (v2)
v2: Added SPI bits to sh_mask header

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:01 -05:00
Lijo Lazar b1adfce26e drm/amd/pm: Add smu driver table structure
For interfaces like gpu metrics, driver returns a formatted structure
based on IP version. Add a separate data structure for such tables which
also tracks the cache intervals.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:01 -05:00
Yang Wang 14b6a73ce1 drm/amd/pm: fix pp_dpm_pcie wrong state issue for smu v13.0.0
put wrong value into incorrect data into following function,
which caused it to fail to match the correct item on smu v13.0.0:
smu_cmn_print_pcie_levels()

Fixes: a95f01edd8 ("drm/amd/pm: Use common helper for smuv13.0.0 dpm")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:01 -05:00
Yang Wang 137a912775 drm/amd/pm: fix pp_dpm_pcie wrong state issue for smu v13.0.7
put wrong value into incorrect data into following function,
which caused it to fail to match the correct item on smu v13.0.7:
smu_cmn_print_pcie_levels()

Fixes: b2debbbb60 ("drm/amd/pm: Use common helper for smuv13.0.7 dpm")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:01 -05:00
Yang Wang c01b52830f drm/amd/pm: fix pp_dpm_pcie wrong state issue for smu v14.0.2
put wrong value into incorrect data into following function,
which caused it to fail to match the correct item on smu v14.0.2:
smu_cmn_print_pcie_levels()

Fixes: 03d11f8564 ("drm/amd/pm: Use common helper for smuv14.0.2 dpm")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:01 -05:00
Yang Wang deacae541a drm/amd/pm: add smu pcie dpm cap & width convert helper
define following heler to convert pmfw pcie dpm index to smu index.
- SMU_DPM_PCIE_GEN_IDX(gen)
- SMU_DPM_PCIE_WIDTH_IDX(width)

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Julia Lawall 95b36732fe drm/amdkfd: update outdated comment
The function acquire_packet_buffer() was renamed
kq_acquire_packet_buffer() by commit a5a4d68c93 ("drm/amdkfd:
Eliminate unnecessary kernel queue function pointers").  Update
the comment accordingly.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Julia Lawall e9009c8b74 drm/amdgpu: update outdated comment
The function amdgpu_amdkfd_gpuvm_import_dmabuf() was split into
import_obj_create() and amdgpu_amdkfd_gpuvm_import_dmabuf_fd() in
commit 0188006d7c ("drm/amdkfd: Import DMABufs for interop
through DRM").  import_obj_create() now does the allocation for
the mem variable discussed in the comment.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Perry Yuan 7edb503fe4 drm/amd/pm: Disable MMIO access during SMU Mode 1 reset
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.

To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.

A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.

Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Srinivasan Shanmugam bd8150a1b3 drm/amdgpu: Refactor amdgpu_gem_va_ioctl for Handling Last Fence Update and Timeline Management v4
This commit simplifies the amdgpu_gem_va_ioctl function, key updates
include:
 - Moved the logic for managing the last update fence directly into
   amdgpu_gem_va_update_vm.
 - Introduced checks for the timeline point to enable conditional
   replacement or addition of fences.

v2: Addressed review comments from Christian.
v3: Updated comments (Christian).
v4: The previous version selected the fence too early and did not manage its
    reference correctly, which could lead to stale or freed fences being used.
    This resulted in refcount underflows and could crash when updating GPU
    timelines.
    The fence is now chosen only after the VA mapping work is completed, and its
    reference is taken safely. After exporting it to the VM timeline syncobj, the
    driver always drops its local fence reference, ensuring balanced refcounting
    and avoiding use-after-free on dma_fence.

	Crash signature:
	[  205.828135] refcount_t: underflow; use-after-free.
	[  205.832963] WARNING: CPU: 30 PID: 7274 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
	...
	[  206.074014] Call Trace:
	[  206.076488]  <TASK>
	[  206.078608]  amdgpu_gem_va_ioctl+0x6ea/0x740 [amdgpu]
	[  206.084040]  ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
	[  206.089994]  drm_ioctl_kernel+0x86/0xe0 [drm]
	[  206.094415]  drm_ioctl+0x26e/0x520 [drm]
	[  206.098424]  ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
	[  206.104402]  amdgpu_drm_ioctl+0x4b/0x80 [amdgpu]
	[  206.109387]  __x64_sys_ioctl+0x96/0xe0
	[  206.113156]  do_syscall_64+0x66/0x2d0
	...
	[  206.553351] BUG: unable to handle page fault for address: ffffffffc0dfde90
	...
	[  206.553378] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
	...
	[  206.553405] Call Trace:
	[  206.553409]  <IRQ>
	[  206.553415]  ? __pfx_drm_sched_fence_free_rcu+0x10/0x10 [gpu_sched]
	[  206.553424]  dma_fence_signal+0x30/0x60
	[  206.553427]  drm_sched_job_done.isra.0+0x123/0x150 [gpu_sched]
	[  206.553434]  dma_fence_signal_timestamp_locked+0x6e/0xe0
	[  206.553437]  dma_fence_signal+0x30/0x60
	[  206.553441]  amdgpu_fence_process+0xd8/0x150 [amdgpu]
	[  206.553854]  sdma_v4_0_process_trap_irq+0x97/0xb0 [amdgpu]
	[  206.554353]  edac_mce_amd(E) ee1004(E)
	[  206.554270]  amdgpu_irq_dispatch+0x150/0x230 [amdgpu]
	[  206.554702]  amdgpu_ih_process+0x6a/0x180 [amdgpu]
	[  206.555101]  amdgpu_irq_handler+0x23/0x60 [amdgpu]
	[  206.555500]  __handle_irq_event_percpu+0x4a/0x1c0
	[  206.555506]  handle_irq_event+0x38/0x80
	[  206.555509]  handle_edge_irq+0x92/0x1e0
	[  206.555513]  __common_interrupt+0x3e/0xb0
	[  206.555519]  common_interrupt+0x80/0xa0
	[  206.555525]  </IRQ>
	[  206.555527]  <TASK>
	...
	[  206.555650] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
	...
	[  206.555667] Kernel panic - not syncing: Fatal exception in interrupt

Link: https://patchwork.freedesktop.org/patch/654669/
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Gangliang Xie f9f281e839 drm/amdgpu: only check critical address when it is not reserved
when an address is reserved already, no need to check if it is
in critical or not, to save time

Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Alan Liu a6ea0a430a drm/amdgpu: Fix query for VPE block_type and ip_count
[Why]
Query for VPE block_type and ip_count is missing.

[How]
Add VPE case in ip_block_type and hw_ip_count query.

Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Jinzhou Su 0099f2e92c drm/amd/ras: Replace NPS flags in ras module
Replace AMDGPU_NPS8_PARTITION_MODE with
UMC_MEMORY_PARTITION_MODE_NPS8 to pass sriov
compilation.

Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Timur Kristóf 0d89268d20 drm/amd/display: Don't repeat DAC load detection
The analog link detection code path had already performed the
DAC load detection by the time the EDID read is attempted.
So there is no need to repeat the DAC load detection,
we can know that no display is connected if no EDID is read.

Fixes: ac1bb49522 ("drm/amd/display: Use DAC load detection on analog connectors (v2)")
Suggested-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Timur Kristóf bb5dfe2f56 drm/amd/display: Add missing encoder setup to DACnEncoderControl
Apparently the DAC encoder needs to be set up before use.
The BIOS parser in DC did not support this so I assumed it was
not necessary, but the DAC doesn't work without it on some GPUs.

Fixes: 69b29b8946 ("drm/amd/display: Hook up DAC to bios_parser_encoder_control")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Timur Kristóf cdf6e4c0cd drm/amd/display: Correct color depth for SelectCRTC_Source
Pass the correct enum values as expected by the VBIOS.
Previously the actual bit depth integer value was passed,
which was a mistake.

Fixes: 7fb4f254c8 ("drm/amd/display: Add SelectCRTC_Source to BIOS parser")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Timur Kristóf 436d0d22aa drm/amd/display: Pass proper DAC encoder ID to VBIOS
Similarly to the analog_engine field, add a new	analog_id field
which contains the encoder ID of the analog encoder that
corresponds to the link encoder.

Previously, the default encoder ID of the link encoder was used,
which meant that we passed the wrong ID in case of DVI-I.

Fixes: 5834c33fd3 ("drm/amd/display: Add concept of analog encoders (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Alex Deucher 5ab75f98fb drm/amdgpu/gfx9: Implement KGQ ring reset
GFX ring resets work differently on pre-GFX10 hardware since
there is no MQD managed by the scheduler.
For ring reset, you need issue the reset via CP_VMID_RESET
via KIQ or MMIO and submit the following to the gfx ring to
complete the reset:
1. EOP packet with EXEC bit set
2. WAIT_REG_MEM to wait for the fence
3. Clear CP_VMID_RESET to 0
4. EVENT_WRITE ENABLE_LEGACY_PIPELINE
5. EOP packet with EXEC bit set
6. WAIT_REG_MEM to wait for the fence
Once those commands have completed the reset should
be complete and the ring can accept new packets.

Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Jiqian Chen <Jiqian.Chen@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 17:00:00 -05:00
Alex Deucher 9596097be4 drm/amdgpu/gfx9: rework pipeline sync packet sequence
Replace WAIT_REG_MEM with EVENT_WRITE flushes for all
shader types and ACQUIRE_MEM.  That should accomplish
the same thing and avoid having to wait on a fence
preventing any issues with pipeline syncs during
queue resets.

Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 16:59:59 -05:00
Alex Deucher c8cf9ddc54 drm/amdgpu: avoid a warning in timedout job handler
Only set an error on the fence if the fence is not
signalled.  We can end up with a warning if the
per queue reset path signals the fence and sets an error
as part of the reset, but fails to recover.

Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 16:59:59 -05:00
Pratap Nirujogi 0288a345f1 drm/amd/amdgpu: Fix SMU warning during isp suspend-resume
ISP mfd child devices are using genpd and the system suspend-resume
operations between genpd and amdgpu parent device which uses only
runtime suspend-resume are not in sync.

Linux power manager during suspend-resume resuming the genpd devices
earlier than the amdgpu parent device. This is resulting in the below
warning as SMU is in suspended state when genpd attempts to resume ISP.

WARNING: CPU: 13 PID: 5435 at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:398 smu_dpm_set_power_gate+0x36f/0x380 [amdgpu]

To fix this warning isp suspend-resume is handled as part of amdgpu
parent device suspend-resume instead of genpd sequence. Each ISP MFD
child device is marked as dev_pm_syscore_device to skip genpd
suspend-resume and use pm_runtime_force api's to suspend-resume
the devices when callbacks from amdgpu are received.

Co-developed-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 16:59:59 -05:00
Taimur Hassan c29935e409 drm/amd/display: Promote DC to 3.2.364
This version brings along the following updates:

 - Add frame skip feature support flag.
 - Add sink EDID data null check.
 - Update function name to link_detect_connection_type_analog.
 - Fix mismatched unlock for DMUB HW lock in HWSS fast path.
 - Fix P010, NV12, YUY2 scale down by four times failure.
 - Fix and reenable UPDATE_V3_FLOW_NEW_CONTEXT_MINIMAL.
 - Consolidate dmub fb info to a single struct.
 - Add new fields to fams2 config.
 - Update timing source enums.
 - Add signal type check for dcn401 get_phyd32clk_src.
 - Fix dsc eDP issue.
 - Remove unnecessary divider update flag.
 - Update dc_connection_dac_load to dc_connection_analog_load.
 - Check NULL before calling dac_load_detection.
 - Replace log macro for analog display detection.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 16:59:59 -05:00
Alex Hung 2b39d48a0a drm/amd/display: Replace log macro for analog display detection
link detection should use LINK_INFO() macro.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 16:59:59 -05:00
Alex Hung 179176134b drm/amd/display: Check NULL before calling dac_load_detection
dac_load_detection can be NULL in some scenario, so checking it before
calling.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 16:59:59 -05:00
Alex Hung 57c8690a84 drm/amd/display: Update dc_connection_dac_load to dc_connection_analog_load
Update to a more accurate name dc_connection_analog_load.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05 16:59:59 -05:00