Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df ("uprobe: Wire up uretprobe system call")
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This way uprobe_unregister() and uprobe_apply() can use "struct uprobe *"
rather than inode + offset. This simplifies the code and allows to avoid
the unnecessary find_uprobe() + put_uprobe() in these functions.
TODO: uprobe_unregister() still needs get_uprobe/put_uprobe to ensure that
this uprobe can't be freed before up_write(&uprobe->register_rwsem).
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240801132734.GA8803@redhat.com
It doesn't make any sense to have 2 versions of _register(). Note that
trace_uprobe_enable(), the only user of uprobe_register(), doesn't need
to check tu->ref_ctr_offset to decide which one should be used, it could
safely pass ref_ctr_offset == 0 to uprobe_register_refctr().
Add this argument to uprobe_register(), update the callers, and kill
uprobe_register_refctr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240801132728.GA8800@redhat.com
test_dev_cgroup is defined as a standalone test program, and so is not
executed in CI.
Convert it to test_progs framework so it is tested automatically in CI, and
remove the old test. In order to be able to run it in test_progs, /dev/null
must remain usable, so change the new test to test operations on devices
1:3 as valid, and operations on devices 1:5 (/dev/zero) as invalid.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-2-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_dev_cgroup currently loads a small bpf program allowing any access on
urandom and zero devices, disabling access to any other device. It makes
migrating this test to test_progs impossible, since this one manipulates
extensively /dev/null.
Allow /dev/null manipulation in dev_cgroup program to make its usage in
test_progs framework possible. Update test_dev_cgroup.c as well to match
this change while it has not been removed.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-1-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Linux 5.1 implemented 64-bit time types and related syscalls to address the
Y2038 problem generally across archs. Userspace handling of Y2038 varies
with the libc however. While musl libc uses 64-bit time across all 32-bit
and 64-bit platforms, GNU glibc uses 64-bit time on 64-bit platforms but
defaults to 32-bit time on 32-bit platforms unless they "opt-in" to 64-bit
time or explicitly use 64-bit syscalls and time structures.
One specific area is the standard setsockopt() call, SO_TIMESTAMPNS option
used for timestamping, and the related output 'struct timespec'. GNU glibc
defaults as above, also exposing the SO_TIMESTAMPNS_NEW flag to explicitly
use a 64-bit call and 'struct __kernel_timespec'. Since these are not
exposed or needed with musl libc, their use in tc_redirect.c leads to
compile errors building for mips64el/musl:
tc_redirect.c: In function 'rcv_tstamp':
tc_redirect.c:425:32: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
425 | cmsg->cmsg_type == SO_TIMESTAMPNS_NEW)
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
tc_redirect.c:425:32: note: each undeclared identifier is reported only once for each function it appears in
tc_redirect.c: In function 'test_inet_dtime':
tc_redirect.c:491:49: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
491 | err = setsockopt(listen_fd, SOL_SOCKET, SO_TIMESTAMPNS_NEW,
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
However, using SO_TIMESTAMPNS_NEW isn't strictly needed, nor is Y2038 being
explicitly tested. The timestamp checks in tc_redirect.c are simple: the
packet receive timestamp is non-zero and processed/handled in less than 5
seconds.
Switch to using the standard setsockopt() call and SO_TIMESTAMPNS option to
ensure compatibility across glibc and musl libc. In the worst-case, there
is a 5-second window 14 years from now where tc_redirect tests may fail on
32-bit systems. However, we should reasonably expect glibc to adopt a
64-bit mandate rather than the current "opt-in" policy before the Y2038
roll-over.
Fixes: ce6f6cffae ("selftests/bpf: Wait for the netstamp_needed_key static key to be turned on")
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/031d656c058b4e55ceae56ef49c4e1729b5090f3.1722244708.git.tony.ambardar@gmail.com
Typically stdin, stdout, stderr are treated as reserved identifiers under
ISO/ANSI C and libc implementations further define these as macros, both in
glibc and musl <stdio.h>.
However, while glibc defines:
...
/* Standard streams. */
extern FILE *stdin; /* Standard input stream. */
extern FILE *stdout; /* Standard output stream. */
extern FILE *stderr; /* Standard error output stream. */
/* C89/C99 say they're macros. Make them happy. */
#define stdin stdin
#define stdout stdout
#define stderr stderr
...
musl instead uses (legally):
...
extern FILE *const stdin;
extern FILE *const stdout;
extern FILE *const stderr;
#define stdin (stdin)
#define stdout (stdout)
#define stderr (stderr)
...
The latter results in compile errors when the names are reused as fields of
'struct test_env' and elsewhere in test_progs.[ch] and reg_bounds.c.
Rename the fields to stdout_saved and stderr_saved to avoid many errors
seen building against musl, e.g.:
In file included from test_progs.h:6,
from test_progs.c:5:
test_progs.c: In function 'print_test_result':
test_progs.c:237:21: error: expected identifier before '(' token
237 | fprintf(env.stdout, "#%-*d %s:", TEST_NUM_WIDTH, test->test_num, test->test_name);
| ^~~~~~
test_progs.c:237:9: error: too few arguments to function 'fprintf'
237 | fprintf(env.stdout, "#%-*d %s:", TEST_NUM_WIDTH, test->test_num, test->test_name);
| ^~~~~~~
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ZqR2DuHdBXPX%2Fyx8@kodidev-ubuntu/
Link: https://lore.kernel.org/bpf/684ea17548e237f39dfb3f7a3d33450069015b21.1722244708.git.tony.ambardar@gmail.com
Include GNU <execinfo.h> header only with glibc and provide weak, stubbed
backtrace functions as a fallback in test_progs.c. This allows for non-GNU
replacements while avoiding compile errors (e.g. with musl libc) like:
test_progs.c:13:10: fatal error: execinfo.h: No such file or directory
13 | #include <execinfo.h> /* backtrace */
| ^~~~~~~~~~~~
test_progs.c: In function 'crash_handler':
test_progs.c:1034:14: error: implicit declaration of function 'backtrace' [-Werror=implicit-function-declaration]
1034 | sz = backtrace(bt, ARRAY_SIZE(bt));
| ^~~~~~~~~
test_progs.c:1045:9: error: implicit declaration of function 'backtrace_symbols_fd' [-Werror=implicit-function-declaration]
1045 | backtrace_symbols_fd(bt, sz, STDERR_FILENO);
| ^~~~~~~~~~~~~~~~~~~~
Fixes: 9fb156bb82 ("selftests/bpf: Print backtrace on SIGSEGV in test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/aa6dc8e23710cb457b278039d0081de7e7b4847d.1722244708.git.tony.ambardar@gmail.com
Compiling lwt_reroute.c with GCC 12.3 for mips64el/musl-libc yields errors:
In file included from .../include/arpa/inet.h:9,
from ./test_progs.h:18,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:11,
from tools/testing/selftests/bpf/prog_tests/lwt_reroute.c:52:
.../include/netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../include/linux/icmp.h:24,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:9:
.../include/linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../include/netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../include/linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
These errors occur because <linux/in6.h> is included before <netinet/in.h>,
bypassing the Linux uapi/libc compat mechanism's partial musl support. As
described in [1] and [2], fix these errors by including <netinet/in.h> in
lwt_reroute.c before any uapi headers.
[1]: commit c0bace7984 ("uapi libc compat: add fallback for unsupported libcs")
[2]: https://git.musl-libc.org/cgit/musl/commit/?id=04983f227238
Fixes: 6c77997bc6 ("selftests/bpf: Add lwt_xmit tests for BPF_REROUTE")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bd2908aec0755ba8b75f5dc41848b00585f5c73e.1722244708.git.tony.ambardar@gmail.com
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Fixes: 7c8dce4b16 ("bpftool: Make skeleton C code compilable with C++ compiler")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Fixes: 3fbfadce60 ("bpf: Fix test_lru_sanity5() in test_lru_map.c")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
Current code parses arguments with strtok_r() using a construct like
char *state = NULL;
while ((next = strtok_r(state ? NULL : input, ",", &state))) {
...
}
where logic assumes the 'state' var can distinguish between first and
subsequent strtok_r() calls, and adjusts parameters accordingly. However,
'state' is strictly internal context for strtok_r() and no such assumptions
are supported in the man page. Moreover, the exact behaviour of 'state'
depends on the libc implementation, making the above code fragile.
Indeed, invoking "./test_progs -t <test_name>" on mips64el/musl will hang,
with the above code in an infinite loop.
Similarly, we see strange behaviour running 'veristat' on mips64el/musl:
$ ./veristat -e file,prog,verdict,insns -C two-ok add-failure
Can't specify more than 9 stats
Rewrite code using a counter to distinguish between strtok_r() calls.
Fixes: 61ddff373f ("selftests/bpf: Improve by-name subtest selection logic in prog_tests")
Fixes: 394169b079 ("selftests/bpf: add comparison mode to veristat")
Fixes: c8bc5e0509 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/392d8bf5559f85fa37926c1494e62312ef252c3d.1722244708.git.tony.ambardar@gmail.com
Use the POSIX version of basename() to allow compilation against non-gnu
libc (e.g. musl). Include <libgen.h> ahead of <string.h> to enable using
functions from the latter while preferring POSIX over GNU basename().
In veristat.c, rely on strdupa() to avoid basename() altering the passed
"const char" argument. This is not needed in xskxceiver.c since the arg
is mutable and the program exits immediately after usage.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/0fd3c9f3c605e6cba33504213c9df287817ade04.1722244708.git.tony.ambardar@gmail.com
In prog_tests/test_global_maps_resize.c, we test various use cases for
resizing global maps. Commit 7244100e0389 ("libbpf: Don't take direct
pointers into BTF data from st_ops") updated libbpf to not store pointers
to volatile BTF data, which for some users, was causing a UAF when resizing
a datasec array.
Let's ensure we have coverage for resizing datasec arrays with struct_ops
progs by also including a struct_ops map and struct_ops prog in the
test_global_map_resize skeleton. The map is automatically loaded, so we
don't need to do anything other than add it to the BPF prog being tested
to get the coverage.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240725032214.50676-1-void@manifault.com
test_xdp_veth.sh tests that XDP return codes work as expected, by bringing
up multiple veth pairs isolated in different namespaces, attaching specific
xdp programs to each interface, and ensuring that the whole chain allows to
ping one end interface from the first one. The test runs well but is
currently not integrated in test_progs, which prevents it from being run
automatically in the CI infrastructure.
Rewrite it as a C test relying on libbpf to allow running it in the CI
infrastructure. The new code brings up the same network infrastructure and
reuses the same eBPF programs as test_xdp_veth.sh, for which skeletons are
already generated by the bpf tests makefile.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-2-23bdba21b2f9@bootlin.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
xdp_redirect_map.c is a bpf program used by test_xdp_veth.sh, which is not
handled by the generic test runner (test_progs). To allow converting this
test to test_progs, the corresponding program must be updated to allow
handling it through skeletons generated by bpftool and libbpf.
Update programs section names to allow to manipulate those with libbpf.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-1-23bdba21b2f9@bootlin.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Fixes: 9e5bd1f763 ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/crypto_sanity.c:10:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from crypto_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 91541ab192 ("selftests: bpf: crypto skcipher algo selftests")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/bpf/911293968f424ad7b462d8805aeb3baee8f4985b.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/decap_sanity.c:9:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from decap_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 70a00e2f1d ("selftests/bpf: Test bpf_skb_adjust_room on CHECKSUM_PARTIAL")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e986ba2d7edccd254b54f7cd049b98f10bafa8c3.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/icmp.h>' which is already provided in
'lwt_helpers.h'. This avoids errors seen compiling for mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from lwt_redirect.c:51:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../linux/icmp.h:24,
from lwt_redirect.c:50:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 43a7c3ef8a ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/3869dda876d5206d2f8d4dd67331c739ceb0c7f8.1721713597.git.tony.ambardar@gmail.com
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
Fixes: 6bcd39d366 ("selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/11c3af75a7eb6bcb7ad9acfae6a6f470c572eb82.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 1f4f80fed2 ("selftests/bpf: test_progs: convert test_tcp_rtt")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
Fixes: ae173a9157 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
Fixes: 580d656d80 ("selftests/bpf: Add kfree_skb raw_tp test")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr', with members 'doff' and 'urg_ptr', is
not exposed by musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
parse_tcp_hdr_opt.c:18:21: error: 'struct tcphdr' has no member named 'urg_ptr'
18 | .pk6_v6.tcp.urg_ptr = 123,
| ^~~~~~~
parse_tcp_hdr_opt.c:19:21: error: 'struct tcphdr' has no member named 'doff'
19 | .pk6_v6.tcp.doff = 9, /* 16 bytes of options */
| ^~~~
Fixes: cfa7b01189 ("selftests/bpf: tests for using dynptrs to parse skb and xdp buffers")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ac5440213c242c62cb4e0d9e0a9cd5058b6a31f6.1721713597.git.tony.ambardar@gmail.com
Update ns_current_pid_tgid.c to use '#include <fcntl.h>' and avoid compile
error against mips64el/musl libc:
In file included from .../prog_tests/ns_current_pid_tgid.c:14:
.../include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
cc1: all warnings being treated as errors
Fixes: 09c02d553c ("bpf, selftests: Fold test_current_pid_tgid_new_ns into test_progs.")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8bdc869749177b575025bf69600a4ce591822609.1721713597.git.tony.ambardar@gmail.com
Explicitly include '<linux/build_bug.h>' to fix errors seen compiling with
gcc targeting mips64el/musl-libc:
user_ringbuf.c: In function 'test_user_ringbuf_loop':
user_ringbuf.c:426:9: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
426 | BUILD_BUG_ON(total_samples <= c_max_entries);
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e5a9df51c7 ("selftests/bpf: Add selftests validating the user ringbuf")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b28575f9221ec54871c46a2e87612bb4bbf46ccd.1721713597.git.tony.ambardar@gmail.com
Include <limits.h> in 'bench.h' to provide a UINT_MAX definition and avoid
multiple compile errors against mips64el/musl-libc like:
benchs/bench_local_storage.c: In function 'parse_arg':
benchs/bench_local_storage.c:40:38: error: 'UINT_MAX' undeclared (first use in this function)
40 | if (ret < 1 || ret > UINT_MAX) {
| ^~~~~~~~
benchs/bench_local_storage.c:11:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
10 | #include <test_btf.h>
+++ |+#include <limits.h>
11 |
seen with bench_local_storage.c, bench_local_storage_rcu_tasks_trace.c, and
bench_bpf_hashmap_lookup.c.
Fixes: 7308748925 ("selftests/bpf: Add benchmark for local_storage get")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f64a9d9fcff40a7fca090a65a68a9b62a468e16.1721713597.git.tony.ambardar@gmail.com
Add a "bpf_util.h" include to avoid the following error seen compiling for
mips64el with musl libc:
bench.c: In function 'find_benchmark':
bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration]
590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 8e7c2a023a ("selftests/bpf: Add benchmark runner infrastructure")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bc4dde77dfcd17a825d8f28f72f3292341966810.1721713597.git.tony.ambardar@gmail.com
The addition of general support for unprivileged tests in test_loader.c
breaks building test_verifier on non-glibc (e.g. musl) systems, due to the
inclusion of glibc extension '<error.h>' in 'unpriv_helpers.c'. However,
the header is actually not needed, so remove it to restore building.
Similarly for sk_lookup.c and flow_dissector.c, error.h is not necessary
and causes problems, so drop them.
Fixes: 1d56ade032 ("selftests/bpf: Unprivileged tests for test_loader.c")
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Fixes: 0905beec9f ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/5664367edf5fea4f3f4b4aec3b182bcfc6edff9c.1721713597.git.tony.ambardar@gmail.com
Existing code calls getsockname() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
bpf_iter_setsockopt.c: In function 'get_local_port':
bpf_iter_setsockopt.c:98:30: error: passing argument 2 of 'getsockname' from incompatible pointer type [-Werror=incompatible-pointer-types]
98 | if (!getsockname(fd, &addr, &addrlen))
| ^~~~~
| |
| struct sockaddr_in6 *
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17,
from bpf_iter_setsockopt.c:5:
.../sys/socket.h:391:23: note: expected 'struct sockaddr * restrict' but argument is of type 'struct sockaddr_in6 *'
391 | int getsockname (int, struct sockaddr *__restrict, socklen_t *__restrict);
| ^
cc1: all warnings being treated as errors
This compiled under glibc only because the argument is declared to be a
"funky" transparent union which includes both types above. Explicitly cast
the argument to allow compiling for both musl and glibc.
Fixes: eed92afdd1 ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/f41def0f17b27a23b1709080e4e3f37f4cc11ca9.1721713597.git.tony.ambardar@gmail.com
Cast 'rlim_t' argument to match expected type of printf() format and avoid
compile errors seen building for mips64el/musl-libc:
In file included from map_tests/sk_storage_map.c:20:
map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free':
map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=]
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ^~~~~~~~~~~~~~~~~~~~~~~
415 | rlim_new.rlim_cur, errno);
| ~~~~~~~~~~~~~~~~~
| |
| rlim_t {aka long long unsigned int}
./test_maps.h:12:24: note: in definition of macro 'CHECK'
12 | printf(format); \
| ^~~~~~
map_tests/sk_storage_map.c:414:68: note: format string is defined here
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ~~^
| |
| long unsigned int
| %llu
cc1: all warnings being treated as errors
Fixes: 51a0e301a5 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com
Use pid_t rather than __pid_t when allocating memory for 'worker_pids' in
'struct test_env', as this is its declared type and also avoids compile
errors seen building against musl libc on mipsel64:
test_progs.c:1738:49: error: '__pid_t' undeclared (first use in this function); did you mean 'pid_t'?
1738 | env.worker_pids = calloc(sizeof(__pid_t), env.workers);
| ^~~~~~~
| pid_t
test_progs.c:1738:49: note: each undeclared identifier is reported only once for each function it appears in
Fixes: 91b2c0afd0 ("selftests/bpf: Add parallelism to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/c6447da51a94babc1931711a43e2ceecb135c93d.1721713597.git.tony.ambardar@gmail.com
Tests for no_caller_saved_registers processing logic
(see verifier.c:match_and_mark_nocsr_pattern()):
- a canary positive test case;
- a canary test case for arm64 and riscv64;
- various tests with broken patterns;
- tests with read/write fixed/varying stack access that violate nocsr
stack access contract;
- tests with multiple subprograms;
- tests using nocsr in combination with may_goto/bpf_loop,
as all of these features affect stack depth;
- tests for nocsr stack spills below max stack depth.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add annotations __arch_x86_64, __arch_arm64, __arch_riscv64
to specify on which architecture the test case should be tested.
Several __arch_* annotations could be specified at once.
When test case is not run on current arch it is marked as skipped.
For example, the following would be tested only on arm64 and riscv64:
SEC("raw_tp")
__arch_arm64
__arch_riscv64
__xlated("1: *(u64 *)(r10 - 16) = r1")
__xlated("2: call")
__xlated("3: r1 = *(u64 *)(r10 - 16);")
__success
__naked void canary_arm64_riscv64(void)
{
asm volatile (
"r1 = 1;"
"*(u64 *)(r10 - 16) = r1;"
"call %[bpf_get_smp_processor_id];"
"r1 = *(u64 *)(r10 - 16);"
"exit;"
:
: __imm(bpf_get_smp_processor_id)
: __clobber_all);
}
On x86 it would be skipped:
#467/2 verifier_nocsr/canary_arm64_riscv64:SKIP
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a macro __xlated("...") for use with test_loader tests.
When such annotations are present for the test case:
- bpf_prog_get_info_by_fd() is used to get BPF program after all
rewrites are applied by verifier.
- the program is disassembled and patterns specified in __xlated are
searched for in the disassembly text.
__xlated matching follows the same mechanics as __msg:
each subsequent pattern is matched from the point where
previous pattern ended.
This allows to write tests like below, where the goal is to verify the
behavior of one of the of the transformations applied by verifier:
SEC("raw_tp")
__xlated("1: w0 = ")
__xlated("2: r0 = &(void __percpu *)(r0)")
__xlated("3: r0 = *(u32 *)(r0 +0)")
__xlated("4: exit")
__success __naked void simple(void)
{
asm volatile (
"call %[bpf_get_smp_processor_id];"
"exit;"
:
: __imm(bpf_get_smp_processor_id)
: __clobber_all);
}
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The call stack for validate_case() function looks as follows:
- test_loader__run_subtests()
- process_subtest()
- run_subtest()
- prepare_case(), which does 'tester->next_match_pos = 0';
- validate_case(), which increments tester->next_match_pos.
Hence, each subtest is run with next_match_pos freshly set to zero.
Meaning that there is no need to persist this variable in the
struct test_loader, use local variable instead.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Adjust disasm_helpers.c:disasm_insn() to account for the following
part of the verifier.c:jit_subprogs:
for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) {
/* ... */
if (!bpf_pseudo_call(insn))
continue;
insn->off = env->insn_aux_data[i].call_imm;
subprog = find_subprog(env, i + insn->off + 1);
insn->imm = subprog;
}
Where verifier moves offset of the subprogram to the insn->off field.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
struct bpf_insn *disasm_insn(struct bpf_insn *insn, char *buf, size_t buf_sz);
Disassembles instruction 'insn' to a text buffer 'buf'.
Removes insn->code hex prefix added by kernel disassembly routine.
Returns a pointer to the next instruction
(increments insn by either 1 or 2).
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The following tests are added to verifier_ldsx.c:
- sign extension of data/data_end/data_meta for tcx programs.
The actual checking is in bpf_skb_is_valid_access() which
is called by sk_filter, cg_skb, lwt, tc(tcx) and sk_skb.
- sign extension of data/data_end/data_meta for xdp programs.
- sign extension of data/data_end for flow_dissector programs.
All newly-added tests have verification failure with message
"invalid bpf_context access". Without previous patch, all these
tests succeeded verification.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240723153444.2430365-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Make log output incorrectly shows 'test_maps' as the binary name for every
'CLNG-BPF' build step, apparently picking up the last value defined for the
$(TRUNNER_BINARY) variable. Update the 'CLANG_BPF_BUILD_RULE' variants to
fix this confusing output.
Current output:
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs] access_map_in_map.skel.h
...
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h
...
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h
After fix:
CLNG-BPF [test_progs] access_map_in_map.bpf.o
GEN-SKEL [test_progs] access_map_in_map.skel.h
...
CLNG-BPF [test_progs-no_alu32] access_map_in_map.bpf.o
GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h
...
CLNG-BPF [test_progs-cpuv4] access_map_in_map.bpf.o
GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h
Fixes: a5d0c26a27 ("selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing")
Fixes: 89ad7420b2 ("selftests/bpf: Drop the need for LLVM's llc")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240720052535.2185967-1-tony.ambardar@gmail.com
Arnd Bergmann
Oleg Nesterov
Jiri Olsa
Alexis Lothoré (eBPF Foundation)
Andrii Nakryiko
Tony Ambardar
Jiri Olsa
David Vernet
Ihor Solodrai
Eduard Zingerman
Yonghong Song