mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-09-22 09:34:56 +02:00
1346d00e1bdfd4067f92bc14e8a6131a01de4190
1101723
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
1346d00e1b |
powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
The HAVE_IRQ_EXIT_ON_IRQ_STACK option tells generic code that irq_exit() is called while still running on the hard irq stack (hardirq_ctx[] in the powerpc code). Selecting the option means the generic code will *not* switch to the softirq stack before running softirqs, because the code is already running on the (mostly empty) hard irq stack. But since commit |
||
|
|
a1b29ba2f2 |
powerpc/kasan: Silence KASAN warnings in __get_wchan()
The following KASAN warning was reported in our kernel.
BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
Read of size 4 at addr d216f958 by task ps/14437
CPU: 3 PID: 14437 Comm: ps Tainted: G O 5.10.0 #1
Call Trace:
[daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
[daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
[daa63908] [c035d6bc] kasan_report+0x1ac/0x218
[daa63948] [c00496e8] get_wchan+0x188/0x250
[daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
[daa63b98] [c0455ac8] proc_single_show+0x98/0x170
[daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
[daa63c38] [c03cb47c] seq_read+0x1dc/0x290
[daa63d68] [c037fc94] vfs_read+0x164/0x510
[daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
[daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
--- interrupt: c00 at 0x8fa8f4
LR = 0x8fa8cc
The buggy address belongs to the page:
page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
flags: 0x0()
raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
^
d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
After looking into this issue, I find the buggy address belongs
to the task stack region. It seems KASAN has something wrong.
I look into the code of __get_wchan in x86 architecture and
find the same issue has been resolved by the commit
|
||
|
|
743cdb7bd0 |
powerpc/kasan: Mark more real-mode code as not to be instrumented
This marks more files and functions that can possibly be called in real mode as not to be instrumented by KASAN. Most were found by inspection, except for get_pseries_errorlog() which was reported as causing a crash in testing. Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoX1kZPnmUX4RZEK@cleo |
||
|
|
6112bd00e8 |
Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman: - Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT) - Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later) - Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ - Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later - Drop support for system call instruction emulation - Many other small features and fixes Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng. * tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/64: Include cache.h directly in paca.h powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set powerpc/xics: Include missing header powerpc/powernv/pci: Drop VF MPS fixup powerpc/fsl_book3e: Don't set rodata RO too early powerpc/microwatt: Add mmu bits to device tree powerpc/powernv/flash: Check OPAL flash calls exist before using powerpc/powermac: constify device_node in of_irq_parse_oldworld() powerpc/powermac: add missing g5_phy_disable_cpu1() declaration selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch" powerpc: Enable the DAWR on POWER9 DD2.3 and above powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask powerpc: Fix all occurences of "the the" selftests/powerpc/pmu/ebb: remove fixed_instruction.S powerpc/platforms/83xx: Use of_device_get_match_data() powerpc/eeh: Drop redundant spinlock initialization powerpc/iommu: Add missing of_node_put in iommu_init_early_dart powerpc/pseries/vas: Call misc_deregister if sysfs init fails powerpc/papr_scm: Fix leaking nvdimm_events_map elements ... |
||
|
|
907bb57aa7 |
Merge tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Pretty big this time. Mostly due to (nice) Renesas refactorings.
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting
both GPIO and pin control, improving a bunch of drivers in the
process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and
started to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas
drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into
proper sub-drivers"
* tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits)
pinctrl: apple: Use a raw spinlock for the regmap
pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs
pinctrl: intel: Fix kernel doc format, i.e. add return sections
dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'
pinctrl: starfive: Make the irqchip immutable
pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10
dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings
pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation
dt-bindings: pinctrl: rockchip: increase max amount of device functions
dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'
dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names
dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config
dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU
pinctrl: qcom: spmi-gpio: Add pm6125 compatible
dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible
pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl
pinctrl: intel: make irq_chip immutable
pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
...
|
||
|
|
ca7984dff9 |
Revert "crypto: poly1305 - cleanup stray CRYPTO_LIB_POLY1305_RSIZE"
This reverts commit |
||
|
|
9d004b2f4f |
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
|
||
|
|
a9f94826e4 |
Merge tag 'clang-format-for-linus-v5.19-rc1' of https://github.com/ojeda/linux
Pull clang-format updates from Miguel Ojeda: "clang-format modernization and cleanups. A few changes from Brian Norris and Mickaël Salaün to start taking advantage of some clang-format 11 features, plus a few cleanups and the usual update of the macro list" * tag 'clang-format-for-linus-v5.19-rc1' of https://github.com/ojeda/linux: clang-format: Fix space after for_each macros clang-format: Fix goto labels indentation clang-format: Update to clang-format >= 6 clang-format: Extend the for_each list with tools/ clang-format: Simplify command with `sort -u` clang-format: Use POSIX locale for `sort` clang-format: Update with v5.18-rc7's `for_each` macro list |
||
|
|
d075c0c1be |
Merge tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Test in-place en/decryption with two sglists in testmgr - Fix process vs softirq race in cryptd Algorithms: - Add arm64 acceleration for sm4 - Add s390 acceleration for chacha20 Drivers: - Add polarfire soc hwrng support in mpsf - Add support for TI SoC AM62x in sa2ul - Add support for ATSHA204 cryptochip in atmel-sha204a - Add support for PRNG in caam - Restore support for storage encryption in qat - Restore support for storage encryption in hisilicon/sec" * tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume() crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY crypto: qat - add support for 401xx devices crypto: qat - re-enable registration of algorithms crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag crypto: qat - add param check for DH crypto: qat - add param check for RSA crypto: qat - remove dma_free_coherent() for DH crypto: qat - remove dma_free_coherent() for RSA crypto: qat - fix memory leak in RSA crypto: qat - add backlog mechanism crypto: qat - refactor submission logic crypto: qat - use pre-allocated buffers in datapath crypto: qat - set to zero DH parameters before free crypto: s390 - add crypto library interface for ChaCha20 crypto: talitos - Uniform coding style with defined variable crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey() crypto: cryptd - Protect per-CPU resource by disabling BH. crypto: sun8i-ce - do not fallback if cryptlen is less than sg length crypto: sun8i-ce - rework debugging ... |
||
|
|
bf272460d7 |
Merge tag '5.19-rc-smb3-client-fixes-updated' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client updates from Steve French: - multichannel fixes to improve reconnect after network failure - improved caching of root directory contents (extending benefit of directory leases) - two DFS fixes - three fixes for improved debugging - an NTLMSSP fix for mounts t0 older servers - new mount parm to allow disabling creating sparse files - various cleanup fixes and minor fixes pointed out by coverity * tag '5.19-rc-smb3-client-fixes-updated' of git://git.samba.org/sfrench/cifs-2.6: (24 commits) smb3: remove unneeded null check in cifs_readdir cifs: fix ntlmssp on old servers cifs: cache the dirents for entries in a cached directory cifs: avoid parallel session setups on same channel cifs: use new enum for ses_status cifs: do not use tcpStatus after negotiate completes smb3: add mount parm nosparse smb3: don't set rc when used and unneeded in query_info_compound smb3: check for null tcon cifs: fix minor compile warning Add various fsctl structs Add defines for various newer FSCTLs smb3: add trace point for oplock not found cifs: return the more nuanced writeback error on close() smb3: add trace point for lease not found issue cifs: smbd: fix typo in comment cifs: set the CREATE_NOT_FILE when opening the directory in use_cached_dir() cifs: check for smb1 in open_cached_dir() cifs: move definition of cifs_fattr earlier in cifsglob.h cifs: print TIDs as hex ... |
||
|
|
aef1ff1592 |
Merge tag 'jfs-5.19' of https://github.com/kleikamp/linux-shaggy
Pull jfs updates from David Kleikamp: "One bug fix and some code cleanup" * tag 'jfs-5.19' of https://github.com/kleikamp/linux-shaggy: fs/jfs: Remove dead code fs: jfs: fix possible NULL pointer dereference in dbFree() |
||
|
|
35cdd8656e |
Merge tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
|
||
|
|
ea6c3bc6ed |
Merge tag 'mfd-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support
- Add support for {Power,Home} Keys to MediaTek MT6359
- Add support for SC2730 to Spreadtrum SPRD SC27XX SPI
- Add support for additional Alder Lake-P I2C Controllers to Intel
LPSS PCI
Fix-ups:
- Convert GPIO to GPIOD (hi655x-pmic)
- Only register devices that exist (cros_ec_dev)
- Remove unused code (syscon, reg-mux)
- Rework .remove() API to return void (twl-core, rt4831)
- Trivial - whitespace, spelling, coding style (tps65218,
sprd-sc27xx-spi, google,cros-ec)
- DT binding changes (samsung,exynos5433-lpass, rockchip,rk805,
rockchip,rk808, rockchip,rk809, rockchip,rk817, rockchip,rk818,
wlf,arizona)
Bug Fixes:
- Fix error handling bugs (ipaq-micro, davinci_voicecodec)"
* tag 'mfd-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: cros-ec: Fix a typo in description
dt-bindings: mfd: wlf,arizona: Add spi-max-frequency
mfd: rt4831: Improve error reporting for problems during .remove()
mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()
mfd: intel-lpss: Add support for ADL-P i2c6 and i2c7
dt-bindings: mfd: rk808: Convert bindings to yaml
mfd: twl4030: Make twl4030_exit_irq() return void
mfd: twl6030: Make twl6030_exit_irq() return void
dt-bindings: mfd: samsung,exynos5433-lpass: Fix 'dma-channels/requests' properties
mfd: sprd: Jugle {of,spi}_device_id tables into numerical order
mfd: sprd: Add SC2730 PMIC to SPI device ID table
dt-bindings: Drop undocumented i.MX iomuxc-gpr bindings in examples
mfd: cros_ec_dev: Only register PCHG device if present
mfd: mt6397-core: Add resources for PMIC keys for MT6359
mfd: mt6359: Add missing defines necessary for mtk-pmic-keys support
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
mfd: hi655x-pmic: Replace legacy gpio interface for gpiod interface
mfd: tps65218: Fix trivial typo in comment
|
||
|
|
6b0e34a030 |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
|
||
|
|
3cc30140db |
Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)
- Log E820 clipping better (Bjorn Helgaas)
- Add kernel cmdline options to enable/disable E820 clipping (Hans de
Goede)
- Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
usable address space for touchpads, Thunderbolt devices, etc (Hans
de Goede)
- Disable E820 clipping by default starting in 2023 (Hans de Goede)
PCI device hotplug:
- Include files to remove implicit dependencies (Christophe Leroy)
- Only put Root Ports in D3 if they can signal and wake from D3 so
AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)
Power management:
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
it's unused otherwise (Krzysztof Kozlowski)
- Power up devices completely, including anything platform firmware
needs to do, during runtime resume (Rafael J. Wysocki)
- Move pci_resume_bus() to PM callbacks so we observe the required
bridge power-up delays (Rafael J. Wysocki)
- Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)
- Split pci_raw_set_power_state() between pci_power_up() and a new
pci_set_low_power_state() (Rafael J. Wysocki)
- Set current_state to D3cold if config read returns ~0, indicating
the device is not accessible (Rafael J. Wysocki)
- Do not call pci_update_current_state() from pci_power_up() so BARs
and ASPM config are restored correctly (Rafael J. Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split pci_power_up() to pci_set_full_power_state() to avoid some
redundant operations (Rafael J. Wysocki)
- Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)
- Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)
- Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
Wysocki)
Virtualization:
- Acquire device lock before config space access lock to avoid AB/BA
deadlock with sriov_numvfs_store() (Yicong Yang)
Error handling:
- Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
leave permanently set (Kuppuswamy Sathyanarayanan)
Peer-to-peer DMA:
- Whitelist Intel Skylake-E Root Ports regardless of which devfn they
are (Shlomo Pongratz)
ASPM:
- Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
can be enabled (Mika Westerberg)
Cadence PCIe controller driver:
- Set up device-specific register to allow PTM Responder to be
enabled by the normal architected bit (Christian Gmeiner)
- Override advertised FLR support since the controller doesn't
implement FLR correctly (Parshuram Thombare)
Cadence PCIe endpoint driver:
- Correct bitmap size for the ob_region_map of outbound window usage
(Dan Carpenter)
Freescale i.MX6 PCIe controller driver:
- Fix PERST# assertion/deassertion so we observe the required delays
before accessing device (Francesco Dolcini)
Freescale Layerscape PCIe controller driver:
- Add "big-endian" DT property (Hou Zhiqiang)
- Update SCFG DT property (Hou Zhiqiang)
- Add "aer", "pme", "intr" DT properties (Li Yang)
- Add DT compatible strings for ls1028a (Xiaowei Bao)
Intel VMD host bridge driver:
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
Marvell MVEBU PCIe controller driver:
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali
Rohár)
MediaTek PCIe controller driver:
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
MediaTek PCIe Gen3 controller driver:
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
and mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
NVIDIA Tegra194 PCIe controller driver:
- Drop tegra194 MSI register save/restore, which is unnecessary since
the DWC core does it (Jisheng Zhang)
Qualcomm PCIe controller driver:
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for
MSM8996/APQ8096 platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry
Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding
(Dmitry Baryshkov)
Rockchip PCIe controller driver:
- Fix bitmap size when searching for free outbound region (Dan
Carpenter)
Rockchip DesignWare PCIe controller driver:
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
because it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
Synopsys DesignWare PCIe controller driver:
- Return error instead of success if DMA mapping of MSI area fails
(Jiantao Zhang)
Miscellaneous:
- Change pci_set_dma_mask() documentation references to
dma_set_mask() (Alex Williamson)"
* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
x86/PCI: Disable E820 reserved region clipping starting in 2023
x86/PCI: Disable E820 reserved region clipping via quirks
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
PCI: microchip: Fix potential race in interrupt handling
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: vmd: Revert
|
||
|
|
8291eaafed |
Merge tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton: - Two follow-on fixes for the post-5.19 series "Use pageblock_order for cma and alloc_contig_range alignment", from Zi Yan. - A series of z3fold cleanups and fixes from Miaohe Lin. - Some memcg selftests work from Michal Koutný <mkoutny@suse.com> - Some swap fixes and cleanups from Miaohe Lin - Several individual minor fixups * tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits) mm/shmem.c: suppress shift warning mm: Kconfig: reorganize misplaced mm options mm: kasan: fix input of vmalloc_to_page() mm: fix is_pinnable_page against a cma page mm: filter out swapin error entry in shmem mapping mm/shmem: fix infinite loop when swap in shmem error at swapoff time mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range mm/swapfile: fix lost swap bits in unuse_pte() mm/swapfile: unuse_pte can map random data if swap read fails selftests: memcg: factor out common parts of memory.{low,min} tests selftests: memcg: remove protection from top level memcg selftests: memcg: adjust expected reclaim values of protected cgroups selftests: memcg: expect no low events in unprotected sibling selftests: memcg: fix compilation mm/z3fold: fix z3fold_page_migrate races with z3fold_map mm/z3fold: fix z3fold_reclaim_page races with z3fold_free mm/z3fold: always clear PAGE_CLAIMED under z3fold page lock mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc" mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc ... |
||
|
|
77fb622de1 |
Merge tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton: "Six hotfixes. The page_table_check one from Miaohe Lin is considered a minor thing so it isn't marked for -stable. The remainder address pre-5.19 issues and are cc:stable" * tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/page_table_check: fix accessing unmapped ptep kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add] mm/page_alloc: always attempt to allocate at least one page during bulk allocation hugetlb: fix huge_pmd_unshare address update zsmalloc: fix races between asynchronous zspage free and page migration Revert "mm/cma.c: remove redundant cma_mutex lock" |
||
|
|
6f664045c8 |
Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton: "The non-MM patch queue for this merge window. Not a lot of material this cycle. Many singleton patches against various subsystems. Most notably some maintenance work in ocfs2 and initramfs" * tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits) kcov: update pos before writing pc in trace function ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock fs/ntfs: remove redundant variable idx fat: remove time truncations in vfat_create/vfat_mkdir fat: report creation time in statx fat: ignore ctime updates, and keep ctime identical to mtime in memory fat: split fat_truncate_time() into separate functions MAINTAINERS: add Muchun as a memcg reviewer proc/sysctl: make protected_* world readable ia64: mca: drop redundant spinlock initialization tty: fix deadlock caused by calling printk() under tty_port->lock relay: remove redundant assignment to pointer buf fs/ntfs3: validate BOOT sectors_per_clusters lib/string_helpers: fix not adding strarray to device's resource list kernel/crash_core.c: remove redundant check of ck_cmdline ELF, uapi: fixup ELF_ST_TYPE definition ipc/mqueue: use get_tree_nodev() in mqueue_get_tree() ipc: update semtimedop() to use hrtimer ipc/sem: remove redundant assignments ... |
||
|
|
8bdc2a1901 |
crypto: poly1305 - cleanup stray CRYPTO_LIB_POLY1305_RSIZE
When CRYPTO_LIB_POLY1305 is unset, CRYPTO_LIB_POLY1305_RSIZE is still set in the Kconfig, cluttering things. Fix this by making CRYPTO_LIB_POLY1305_RSIZE depend on CRYPTO_LIB_POLY1305. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
e68b823ab0 |
arm64/hugetlb: Fix building errors in huge_ptep_clear_flush()
Fix the arm64 build error which was caused by commit |
||
|
|
189b0ddc24 |
pipe: Fix missing lock in pipe_resize_ring()
pipe_resize_ring() needs to take the pipe->rd_wait.lock spinlock to
prevent post_one_notification() from trying to insert into the ring
whilst the ring is being replaced.
The occupancy check must be done after the lock is taken, and the lock
must be taken after the new ring is allocated.
The bug can lead to an oops looking something like:
BUG: KASAN: use-after-free in post_one_notification.isra.0+0x62e/0x840
Read of size 4 at addr ffff88801cc72a70 by task poc/27196
...
Call Trace:
post_one_notification.isra.0+0x62e/0x840
__post_watch_notification+0x3b7/0x650
key_create_or_update+0xb8b/0xd20
__do_sys_add_key+0x175/0x340
__x64_sys_add_key+0xbe/0x140
do_syscall_64+0x5c/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported by Selim Enes Karaduman @Enesdex working with Trend Micro Zero
Day Initiative.
Fixes:
|
||
|
|
44a48081fc |
smb3: remove unneeded null check in cifs_readdir
Coverity pointed out an unneeded check.
Addresses-Coverity: 1518030 ("Null pointer dereferences")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
|
|
fa020a2b87 |
mm/shmem.c: suppress shift warning
mm/shmem.c:1948 shmem_getpage_gfp() warn: should '(((1) << 12) / 512) << folio_order(folio)' be a 64 bit type? On i386, so an unsigned long is 32-bit, but i_blocks is a 64-bit blkcnt_t. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Jessica Clarke <jrtc27@jrtc27.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
0710d0122a |
mm: Kconfig: reorganize misplaced mm options
After commits |
||
|
|
fbf4df0699 |
mm: kasan: fix input of vmalloc_to_page()
When print virtual mapping info for vmalloc address, it should pass
the addr not page, fix it.
Link: https://lkml.kernel.org/r/20220525120804.38155-1-wangkefeng.wang@huawei.com
Fixes:
|
||
|
|
1c56343258 |
mm: fix is_pinnable_page against a cma page
Pages in the CMA area could have MIGRATE_ISOLATE as well as MIGRATE_CMA so
the current is_pinnable_page() could miss CMA pages which have
MIGRATE_ISOLATE. It ends up pinning CMA pages as longterm for the
pin_user_pages() API so CMA allocations keep failing until the pin is
released.
CPU 0 CPU 1 - Task B
cma_alloc
alloc_contig_range
pin_user_pages_fast(FOLL_LONGTERM)
change pageblock as MIGRATE_ISOLATE
internal_get_user_pages_fast
lockless_pages_from_mm
gup_pte_range
try_grab_folio
is_pinnable_page
return true;
So, pinned the page successfully.
page migration failure with pinned page
..
.. After 30 sec
unpin_user_page(page)
CMA allocation succeeded after 30 sec.
The CMA allocation path protects the migration type change race using
zone->lock but what GUP path need to know is just whether the page is on
CMA area or not rather than exact migration type. Thus, we don't need
zone->lock but just checks migration type in either of (MIGRATE_ISOLATE
and MIGRATE_CMA).
Adding the MIGRATE_ISOLATE check in is_pinnable_page could cause rejecting
of pinning pages on MIGRATE_ISOLATE pageblocks even though it's neither
CMA nor movable zone if the page is temporarily unmovable. However, such
a migration failure by unexpected temporal refcount holding is general
issue, not only come from MIGRATE_ISOLATE and the MIGRATE_ISOLATE is also
transient state like other temporal elevated refcount problem.
Link: https://lkml.kernel.org/r/20220524171525.976723-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
|
ba6851b45d |
mm: filter out swapin error entry in shmem mapping
There might be swapin error entries in shmem mapping. Filter them out to avoid "Bad swap file entry" complaint. Link: https://lkml.kernel.org/r/20220519125030.21486-6-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
6cec2b95da |
mm/shmem: fix infinite loop when swap in shmem error at swapoff time
When swap in shmem error at swapoff time, there would be a infinite loop in the while loop in shmem_unuse_inode(). It's because swapin error is deliberately ignored now and thus info->swapped will never reach 0. So we can't escape the loop in shmem_unuse(). In order to fix the issue, swapin_error entry is stored in the mapping when swapin error occurs. So the swapcache page can be freed and the user won't end up with a permanently mounted swap because a sector is bad. If the page is accessed later, the user process will be killed so that corrupted data is never consumed. On the other hand, if the page is never accessed, the user won't even notice it. Link: https://lkml.kernel.org/r/20220519125030.21486-5-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reported-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
7b49514fa1 |
mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
Once the MADV_FREE operation has succeeded, callers can expect they might get zero-fill pages if accessing the memory again. Therefore it should be safe to delete the hwpoison entry and swapin error entry. There is no reason to kill the process if it has called MADV_FREE on the range. Link: https://lkml.kernel.org/r/20220519125030.21486-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
14a762dd19 |
mm/swapfile: fix lost swap bits in unuse_pte()
This is observed by code review only but not any real report. When we turn off swapping we could have lost the bits stored in the swap ptes. The new rmap-exclusive bit is fine since that turned into a page flag, but not for soft-dirty and uffd-wp. Add them. Link: https://lkml.kernel.org/r/20220519125030.21486-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: NeilBrown <neilb@suse.de> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
9f186f9e5f |
mm/swapfile: unuse_pte can map random data if swap read fails
Patch series "A few fixup patches for mm", v4. This series contains a few patches to avoid mapping random data if swap read fails and fix lost swap bits in unuse_pte. Also we free hwpoison and swapin error entry in madvise_free_pte_range and so on. More details can be found in the respective changelogs. This patch (of 5): There is a bug in unuse_pte(): when swap page happens to be unreadable, page filled with random data is mapped into user address space. In case of error, a special swap entry indicating swap read fails is set to the page table. So the swapcache page can be freed and the user won't end up with a permanently mounted swap because a sector is bad. And if the page is accessed later, the user process will be killed so that corrupted data is never consumed. On the other hand, if the page is never accessed, the user won't even notice it. Link: https://lkml.kernel.org/r/20220519125030.21486-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220519125030.21486-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
f079a020ba |
selftests: memcg: factor out common parts of memory.{low,min} tests
The memory protection test setup and runtime is almost equal for memory.low and memory.min cases. It makes modification of the common parts prone to mistakes, since the protections are similar not only in setup but also in principle, factor the common part out. Past exceptions between the tests: - missing memory.min is fine (kept), - test_memcg_low protected orphaned pagecache (adapted like test_memcg_min and we keep the processes of protected memory running). The evaluation in two tests is different (OOM of allocator vs low events of protégés), this is kept different. Link: https://lkml.kernel.org/r/20220518161859.21565-6-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> CC: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: David Vernet <void@manifault.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
6a35919005 |
selftests: memcg: remove protection from top level memcg
The reclaim is triggered by memory limit in a subtree, therefore the testcase does not need configured protection against external reclaim. Also, correct respective comments. Link: https://lkml.kernel.org/r/20220518161859.21565-5-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: David Vernet <void@manifault.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
f10b6e9a8e |
selftests: memcg: adjust expected reclaim values of protected cgroups
The numbers are not easy to derive in a closed form (certainly mere protections ratios do not apply), therefore use a simulation to obtain expected numbers. Link: https://lkml.kernel.org/r/20220518161859.21565-4-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: David Vernet <void@manifault.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
1d09069f53 |
selftests: memcg: expect no low events in unprotected sibling
This is effectively a revert of commit
|
||
|
|
ff3b72a5d6 |
selftests: memcg: fix compilation
Patch series "memcontrol selftests fixups", v2.
Flushing the patches to make memcontrol selftests check the events
behavior we had consensus about (test_memcg_low fails).
(test_memcg_reclaim, test_memcg_swap_max fail for me now but it's present
even before the refactoring.)
The two bigger changes are:
- adjustment of the protected values to make tests succeed with the given
tolerance,
- both test_memcg_low and test_memcg_min check protection of memory in
populated cgroups (actually as per Documentation/admin-guide/cgroup-v2.rst
memory.min should not apply to empty cgroups, which is not the case
currently. Therefore I unified tests with the populated case in order to to
bring more broken tests).
This patch (of 5):
This fixes mis-applied changes from commit
|
||
|
|
943fb61dd6 |
mm/z3fold: fix z3fold_page_migrate races with z3fold_map
Think about the below scenario:
CPU1 CPU2
z3fold_page_migrate z3fold_map
z3fold_page_trylock
...
z3fold_page_unlock
/* slots still points to old zhdr*/
get_z3fold_header
get slots from handle
get old zhdr from slots
z3fold_page_trylock
return *old* zhdr
encode_handle(new_zhdr, FIRST|LAST|MIDDLE)
put_page(page) /* zhdr is freed! */
but zhdr is still used by caller!
z3fold_map can map freed z3fold page and lead to use-after-free bug. To
fix it, we add PAGE_MIGRATED to indicate z3fold page is migrated and soon
to be released. So get_z3fold_header won't return such page.
Link: https://lkml.kernel.org/r/20220429064051.61552-10-linmiaohe@huawei.com
Fixes:
|
||
|
|
04094226d6 |
mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
Think about the below scenario:
CPU1 CPU2
z3fold_reclaim_page z3fold_free
spin_lock(&pool->lock) get_z3fold_header -- hold page_lock
kref_get_unless_zero
kref_put--zhdr->refcount can be 1 now
!z3fold_page_trylock
kref_put -- zhdr->refcount is 0 now
release_z3fold_page
WARN_ON(!list_empty(&zhdr->buddy)); -- we're on buddy now!
spin_lock(&pool->lock); -- deadlock here!
z3fold_reclaim_page might race with z3fold_free and will lead to pool lock
deadlock and zhdr buddy non-empty warning. To fix this, defer getting the
refcount until page_lock is held just like what __z3fold_alloc does. Note
this has the side effect that we won't break the reclaim if we meet a soon
to be released z3fold page now.
Link: https://lkml.kernel.org/r/20220429064051.61552-9-linmiaohe@huawei.com
Fixes:
|
||
|
|
4a1c383910 |
mm/z3fold: always clear PAGE_CLAIMED under z3fold page lock
Think about the below race window: CPU1 CPU2 z3fold_reclaim_page z3fold_free test_and_set_bit PAGE_CLAIMED failed to reclaim page z3fold_page_lock(zhdr); add back to the lru list; z3fold_page_unlock(zhdr); get_z3fold_header page_claimed=test_and_set_bit PAGE_CLAIMED clear_bit(PAGE_CLAIMED, &page->private); if (!page_claimed) /* it's false true */ free_handle is not called free_handle won't be called in this case. So z3fold_buddy_slots will leak. Fix it by always clear PAGE_CLAIMED under z3fold page lock. Link: https://lkml.kernel.org/r/20220429064051.61552-8-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
6cf9a34967 |
mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
When doing z3fold page reclaim or migration, the page is removed from unbuddied list. If reclaim or migration succeeds, it's fine as page is released. But in case it fails, the page is not put back into unbuddied list now. The page will be leaked until next compaction work, reclaim or migration is done. Link: https://lkml.kernel.org/r/20220429064051.61552-7-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
f4bad643c1 |
revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
Revert commit
|
||
|
|
2c0f351434 |
mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
If trylock_page fails, the page won't be non-lru movable page. When this page is freed via free_z3fold_page, it will trigger bug on PageMovable check in __ClearPageMovable. Throw warning on failure of trylock_page to guard against such rare case just as what zsmalloc does. Link: https://lkml.kernel.org/r/20220429064051.61552-5-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
df6f0f1d0c |
mm/z3fold: remove buggy use of stale list for allocation
Currently if z3fold couldn't find an unbuddied page it would first try to pull a page off the stale list. But this approach is problematic. If init z3fold page fails later, the page should be freed via free_z3fold_page to clean up the relevant resource instead of using __free_page directly. And if page is successfully reused, it will BUG_ON later in __SetPageMovable because it's already non-lru movable page, i.e. PAGE_MAPPING_MOVABLE is already set in page->mapping. In order to fix all of these issues, we can simply remove the buggy use of stale list for allocation because can_sleep should always be false and we never really hit the reusing code path now. Link: https://lkml.kernel.org/r/20220429064051.61552-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
7c61c35bbd |
mm/z3fold: fix possible null pointer dereferencing
alloc_slots could fail to allocate memory under heavy memory pressure. So
we should check zhdr->slots against NULL to avoid future null pointer
dereferencing.
Link: https://lkml.kernel.org/r/20220429064051.61552-3-linmiaohe@huawei.com
Fixes:
|
||
|
|
4c6bdb3640 |
mm/z3fold: fix sheduling while atomic
Patch series "A few fixup patches for z3fold".
This series contains a few fixup patches to fix sheduling while atomic,
fix possible null pointer dereferencing, fix various race conditions and
so on. More details can be found in the respective changelogs.
This patch (of 9):
z3fold's page_lock is always held when calling alloc_slots. So gfp should
be GFP_ATOMIC to avoid "scheduling while atomic" bug.
Link: https://lkml.kernel.org/r/20220429064051.61552-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220429064051.61552-2-linmiaohe@huawei.com
Fixes:
|
||
|
|
86d28b0709 |
mm: split free page with properly free memory accounting and without race
In isolate_single_pageblock(), free pages are checked without holding zone
lock, but they can go away in split_free_page() when zone lock is held.
Check the free page and its order again in split_free_page() when zone lock
is held. Recheck the page if the free page is gone under zone lock.
In addition, in split_free_page(), the free page was deleted from the page
list without changing free page accounting. Add the missing free page
accounting code.
Fix the type of order parameter in split_free_page().
Link: https://lore.kernel.org/lkml/20220525103621.987185e2ca0079f7b97b856d@linux-foundation.org/
Link: https://lkml.kernel.org/r/20220526231531.2404977-2-zi.yan@sent.com
Fixes:
|
||
|
|
9b209e557d |
mm: page-isolation: skip isolated pageblock in start_isolate_page_range()
start_isolate_page_range() first isolates the first and the last
pageblocks in the range and ensure pages across range boundaries are split
during isolation. But it missed the case when the range is <= a pageblock
and the first and the last pageblocks are the same one, so the second
isolate_single_pageblock() will always fail. To fix it, skip the
pageblock isolation in second isolate_single_pageblock().
Link: https://lkml.kernel.org/r/20220526231531.2404977-1-zi.yan@sent.com
Fixes:
|
||
|
|
24c8e27e63 |
mm/page_table_check: fix accessing unmapped ptep
ptep is unmapped too early, so ptep could theoretically be accessed while
it's unmapped. This might become a problem if/when CONFIG_HIGHPTE becomes
available on riscv.
Fix it by deferring pte_unmap() until page table checking is done.
[akpm@linux-foundation.org: account for ptep alteration, per Matthew]
Link: https://lkml.kernel.org/r/20220526113350.30806-1-linmiaohe@huawei.com
Fixes:
|
||
|
|
3e35142ef9 |
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.
Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1
[akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h]
Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
|
c572e4888a |
mm/page_alloc: always attempt to allocate at least one page during bulk allocation
Peter Pavlisko reported the following problem on kernel bugzilla 216007. When I try to extract an uncompressed tar archive (2.6 milion files, 760.3 GiB in size) on newly created (empty) XFS file system, after first low tens of gigabytes extracted the process hangs in iowait indefinitely. One CPU core is 100% occupied with iowait, the other CPU core is idle (on 2-core Intel Celeron G1610T). It was bisected to |