smc_listen_out() reads lsmc->sk.sk_state without the listener lock,
then acquires lock_sock_nested() only after the check passes. This
opens a window where smc_close_active() can transition the listener
to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept
queue, and release the lock, all between the lockless read and the
delayed lock acquisition:
smc_listen_work (smc_hs_wq) smc_close_active()
------------------------------- -------------------------
release_sock(child)
if (sk_state == SMC_LISTEN) TRUE
lock_sock(listener)
sk_state = SMC_CLOSED
smc_close_cleanup_listen()
release_sock(listener)
flush_work(tcp_listen_work)
lock_sock_nested(listener)
smc_accept_enqueue(listener, child) /* child enqueued on dead listener */
smc_close_active() flushes only tcp_listen_work. Work items already
dispatched onto smc_hs_wq for the CLC handshake continue running
unguarded. smc_accept_enqueue() takes a sock_hold() on the child that
is never released, so the child smc_sock, its clcsock, and the
reference all leak. A remote peer that opens TCP connections while the
server calls close() can exhaust kernel memory.
Move lock_sock_nested() to before the sk_state check so that the test
and the enqueue are atomic under the listener lock.
Fixes: fd57770dd1 ("net/smc: wait for pending work before clcsock release_sock")
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260803070701.126339-1-sidraya@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I am already listed as a maintainer for the HNS3 and HIBMCGE drivers,
but not for the broader Hisilicon Network Subsystem entry, whose file
pattern covers drivers/net/ethernet/hisilicon/ (e.g. the legacy hns
driver). As a result, patches to those files are not CC'd to me.
Add myself alongside Jian Shen to help maintain these legacy Hisilicon
ethernet drivers and ensure patches in this tree are routed to me.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Jian Shen <shenjian15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260804130554.871716-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler.
Fixes: cc21191b58 ("dibs: Move data path to dibs layer")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Link: https://patch.msgid.link/20260730124227.167829-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 4f61f133f3 ("net: tap: NULL pointer derefence in
dev_parse_header_protocol when skb->dev is null") fixed a crash in
tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb().
This is required because virtio_net_hdr_to_skb() may invoke
dev_parse_header_protocol(), which dereferences skb->dev. Without the
assignment, a NULL pointer dereference can occur.
However, tap_get_user_xdp() still parses the virtio-net header before
assigning skb->dev. When the vhost TX path passes an XDP buffer containing
a GSO virtio-net header but the protocol is set to zero on purpose,
tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev
is still NULL, resulting in a crash.
Fix this by looking up the tap device and assigning skb->dev before calling
tun_vnet_hdr_to_skb(), matching the ordering already used in
tap_get_user(). Preserve the existing RCU read-side critical section across
dev_queue_xmit().
Fixes: 924a9bc362 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260802224612.264563-1-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the
quoted inner IPv6 packet, and then passes the clone to icmpv6_send().
The clone still carries the outer packet's inet6_skb_parm in skb->cb.
If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao
remains non-zero after skb_pull(). icmpv6_send() later calls
mip6_addr_swap(), which uses that stale dsthao offset against the quoted
inner packet. A malformed inner destination-options header can then make
the HAO lookup and address swap run past the end of the quoted packet
and corrupt skb_shared_info.
Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the
reply path does not reuse metadata left by the outer IPv6 stack.
Fixes: e490d1d85c ("[IPV6] IP6TUNNEL: Split out generic routine in ip6ip6_err().")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/fe1a5e765fbca88d69391887f0ed26a19e3e4d39.1785736562.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ncsi_send_cmd_nl() takes the number of bytes to copy from the
attacker-controlled ncsi_pkt_hdr.length field of the in-band packet
header, while the source buffer is the NCSI_ATTR_DATA netlink
attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr).
The two length sources are never cross-checked: only
nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced.
With hdr->length set larger than the attribute payload (up to 65535
against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies
past the end of the netlink attribute buffer with unsafe_memcpy(),
leaking up to ~64KB of kernel heap memory into the transmitted NCSI
command packet. The destination skb is sized by the declared payload,
so the write side does not overflow - this is a pure OOB read /
information leak, reachable with CAP_NET_ADMIN on systems with a
registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where
NET_NCSI=y is standard).
Reject commands whose declared payload extends past the end of the
data attribute.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab.
Fixes: 9771b8ccdf ("net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command")
Reported-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20260803043618.3210301-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired.
Fixes: 3accf47627 ("mac802154: Handle basic beaconing")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/e9a3909c7a6281967961773ca841e860b8ecf40e.1785596603.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Incoming skbs passing through netfilter flowtable offload hooks (or XFRM
offload path) might already carry a ref-counted dst_entry assigned during
earlier RX or routing steps.
Calling skb_dst_set_noref() when skb already holds a ref-counted dst
overwrites skb->_skb_refdst, leaking the previous dst_entry reference
count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in
skb_dst_check_unset():
WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170
WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234
WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864
Drop any existing dst_entry reference with skb_dst_drop(skb) before
setting the non-referenced flowtable destination.
Fixes: 2a79fd3908 ("netfilter: nf_flow_table: attach dst to skbs")
Reported-by: syzbot+76d4e3a055aec3b007ec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a71b141.9511d2ce.1fc5b9.033b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20260804093328.1831847-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through
far more pending Fast Open requests than it was configured for.
This only shows up with SO_REUSEPORT listener migration, where closing a
listener hands its still-pending TFO children over to a surviving one.
fastopenq.qlen is charged in tcp_fastopen_create_child() when the child
is created and uncharged in reqsk_fastopen_remove() when the handshake
completes. The uncharge follows rsk_listener of the request the child
points at, and inet_reqsk_clone() has repointed the child at a new
request owned by the new listener, so the ++ and the -- land on two
different sockets. The new listener's qlen drifts negative and its
limit no longer binds.
Charge the new listener during migration, like reqsk_queue_migrated()
already does for queue->young and queue->qlen.
Fixes: 54b92e8419 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260803061739.134737-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Partial pull of the nf-26-07-31 tag
Pablo says:
====================
The following patchset contains Netfilter/IPVS fixes net, this
includes fixes for ebtables nflog target, ipset hash type,
IPVS kthread estimator
1) Prevent IPVS kthread estimator from draining the est_temp_list
when netns is being dismantled. From Zhiling Zou.
2) Missing module nflog refcount bump from ebtables nflog target from
.checkentry path. Similar dependency exists already in xt_NFLOG and
nft_log. From Chengfeng Ye.
3) Use RCU to fix ipset bookkeeping of cidr values on weakly-ordered
architectures. From Jozsef Kadlecsik.
4) Use atomic64_t for set->ext_size in ipset to fix parallel inserts
and deletes racing on updating it. From Jozsef Kadlecsik.
5) Add small wrappers for hash and bucket size to prepare the update
of ipset hash set types to rhashtable, from Florian Westphal.
6) Add mtype_del_cidr_all() and use it to prepare the migration of
ipset hash types to rhashtable. From Florian Westphal.
7) Replace existing ipset call_rcu() based destruction with rcu_work
api also to ease the transition to rhashtable. Also from Florian.
8) Avoid reading the IPv4 ihl field multiple times to prevent local
attacker to cause out-of-bounds write in ip_vs_nat_icmp(), from
Julian Anastasov.
9) Restore the checksum validations that could be needed by the IPVS
FORWARD hook. Also from Julian.
====================
Link: https://patch.msgid.link/20260731151806.849724-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In sctp_process_asconf(), when sctp_make_asconf_ack() fails to allocate
the ASCONF_ACK chunk due to memory pressure, the code jumps to the
done label where asoc->peer.addip_serial is unconditionally incremented.
This leaves the peer's ASCONF (serial N) unacknowledged while the local
endpoint now expects serial N+1. When the peer retransmits serial N, it
falls into the serial < addip_serial + 1 branch ,
which attempts to look up a cached ACK for serial N. No cached ACK
exists since the allocation failed, so the retransmission is silently
discarded. The peer eventually times out and ABORTs the association.
Move the addip_serial increment inside the if (asconf_ack) block so that
the serial number is only advanced when the ASCONF_ACK is successfully
created and cached. This way, on allocation failure, the serial number
is unchanged and the peer's retransmitted ASCONF will be correctly
re-processed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260804025514.241767-1-l1138897701@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Bug fixes
This series include 3 bug fixes:
1. queue start bug fix on the VNIC's default ring. 2 refactoring
patches preceed the actual bug fix.
2. Bug fix for TPA data corruption seen on some ARM systems.
3. PTP PPS setting bug fix.
====================
Link: https://patch.msgid.link/20260731190937.807270-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing driver logic is always turning on PTP_CLK_REQ_PPS
regardless of the "on" parameter passed to bnxt_ptp_enable().
During shutdown, PTP_CLK_REQ_PPS may be turned off and this
bug will do the opposite and may trigger a PCIe PTM request TLP.
On some systems this can trigger a PCIe AER.
Fix it by properly configuring PTP_CLK_REQ_PPS based on the "on"
parameter.
Fixes: 9e518f2580 ("bnxt_en: 1PPS functions to configure TSIO pins")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Keegan Freyhof <keegan.freyhof@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption.
Fixes: bfcd8d791e ("bnxt_en: Add fast path logic for TPA on 57500 chips.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each VNIC has a default RX ring. The purpose of the default RX ring
is to provide a destination for any packets that cannot be parsed by
the RSS logic. Up until now, the default RX ring is always Ring 0.
We neglected to take care of this default RX ring when adding the
queue restart feature. If ring 0 (default ring) is re-started, it
may now have a new FW ring ID after freeing the old one and
allocating a new one. The VNIC now may have a stale default ring
and it may generate an internal exception. This exception may
appear in dmesg:
FW reported unknown error type 10
The best way to resolve this issue is to use a more appropriate
ring for the default ring instead of always ring 0. Ring 0 may not
even be in the RSS table, especially on a new RSS context.
This patch adds the logic to determine and store the proper default
RX ring for a VNIC. For an RSS VNIC, the default ring is the lowest
ring number in the RSS table. The next patch will add proper logic
to update the VNIC if the default ring changes after queue restart.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_queue_start() deactivates and re-activates all channels but closes
only the queue being restarted. mlx5e_activate_txqsq() then
unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters
of channels that kept their in-flight TX WQEs. The next completion then
over-charges and trips the BUG_ON() in dql_completed():
kernel BUG at lib/dynamic_queue_limits.c:99!
RIP: 0010:dql_completed+0x23d/0x280
Call Trace:
<IRQ>
mlx5e_poll_tx_cq+0x668/0xa60
mlx5e_napi_poll+0x5b/0x7b0
net_rx_action+0x15a/0x580
Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc).
In the case that reset is skipped, the outstanding WQEs will eventually
complete and rebalance the dql. The dql->limit is carried across the
reset.
Fixes: b2588ea40e ("net/mlx5e: Implement queue mgmt ops and single channel swap")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260803-mlx5-bql-v3-1-a30d4c66fe1d@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovs_flow_cmd_new() preallocates the optional reply skb before it takes
ovs_mutex and before it knows which existing flow will be updated.
That is normally fine because the skb is sized from the request flow
identifier. That identifier also becomes the inserted flow's identifier.
For updates, however, a request with a UFID may miss the UFID lookup and
then fall back to the flow key lookup. That lookup can legitimately find
an existing key-identified flow. UFIDs are optional and the flow key is
the primary identifier.
For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's
identifier, not the request identifier used for the preallocation. A short
request UFID can therefore leave too little room for the key identifier.
The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the
update path.
Once the update target has been resolved, reallocate the reply skb if the
matched flow needs a larger reply than the request identifier allowed. Do
this before replacing the actions so the request can still fail cleanly if
the rare extra allocation fails.
Fixes: 74ed7ab926 ("openvswitch: Add support for unique flow IDs.")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/f7bbd3c30ce81a39156e226b3872d73abed21d2f.1785644623.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnge_fix_rings_count() returns 0 on success or a negative errno on failure
However, bnge_adjust_rings() stores its return value in a u16 variable,
causing negative error codes such as -ENOMEM to be converted to a large
positive value.
Use an int for the return code variable so that error values are
preserved and propagated correctly.
Fixes: 627c67f038 ("bng_en: Add resource management support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Link: https://patch.msgid.link/20260801100923.1498570-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yangyu Chen says:
====================
net: atlantic: fix two ring teardown leaks
These are the two fixes from the page_pool conversion series [1],
resent against net as requested in the review of that series. The
page_pool conversion itself stays in net-next and is not part of this
posting; it depends on these fixes, but they stand on their own.
Both patches are unchanged from [1] apart from the collected
Reviewed-by tags, and each carries a Fixes tag and a Cc: stable with
the affected range (patch 1: v4.11+, patch 2: v5.2+). They apply and
were build- and runtime-tested independently of each other and of the
conversion.
Patch 1: aq_vec_deinit() drains the TX rings with a single
aq_ring_tx_clean() call, which is capped at AQ_CFG_TX_CLEAN_BUDGET
descriptors and stops at hw_head, frozen once the hardware and NAPI
have been stopped. Everything beyond that keeps its skb or xdp_frame
when the interface goes down and is lost when the buffer ring is
freed.
Patch 2: aq_ring_rx_deinit() only walks [sw_head, sw_tail). Since the
page reuse strategy was added, a cleaned RX buffer keeps its page for
reuse and refill is batched, so consumed but not yet reposted slots
accumulate in the [sw_tail, sw_head) gap and their pages and DMA
mappings are never released.
Reproduction logs for both leaks (as page_pool stalled shutdowns,
which is how they become visible) are in the notes of the respective
patches.
[1] https://lore.kernel.org/lkml/tencent_1F173E0FC1606D2AC704DC9C98AF10984607@qq.com/
====================
Link: https://patch.msgid.link/tencent_29B860317921D68DE77C718242DA418EB608@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to
hardware. Since the page reuse strategy was added, a cleaned RX buffer
keeps its page (and its DMA mapping) in the ring for reuse, and refill
is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES
slots are free. Slots that were consumed but not yet reposted therefore
sit in the complementary [sw_tail, sw_head) gap with a live page, and
the deinit walk never visits them: up to a refill batch worth of pages
and DMA mappings leak on every interface down.
Walk the whole ring instead and release whatever is still there. Also
bail out if the buffer ring is already gone: a partial
aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so
aq_ptp_ring_deinit() still gets here on the unwind path.
Cc: stable@vger.kernel.org # v5.2+
Fixes: 46f4c29d9d ("net: aquantia: optimize rx performance by page reuse strategy")
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/tencent_607CBA8237DA438E36B844318B21538DE008@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean()
call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and
stops at hw_head, which no longer moves once aq_vec_stop() has stopped
the hardware and NAPI. Completed descriptors beyond the budget and
everything still posted in [hw_head, sw_tail) keep their skb or
xdp_frame when the interface goes down: aq_vec_ring_free() then frees
the buffer ring and the references are lost for good.
Today this is a silent memory leak on every interface down under
TX/XDP_TX load. With the conversion of the RX path to page_pool posted
for net-next it becomes much more visible: XDP_TX frames carry fragment
references on the RX ring's page_pool, so a single stranded frame keeps
the pool's inflight count above zero forever. page_pool_destroy() then
never completes, the pool is leaked together with its pages, and
"page_pool_release_retry() stalled pool shutdown" is warned every 60
seconds from that point on, on every ifdown, XDP detach or ring resize
under XDP_TX load.
Bring back aq_ring_tx_deinit() as it was before the removal and use it
for teardown again, with one extension: TX rings can hold xdp_frames
nowadays, so release those too. They are returned with
xdp_return_frame() since this runs in process context.
Fixes: eb36bedf28 ("net: aquantia: remove function aq_ring_tx_deinit")
Cc: stable@vger.kernel.org # v4.11+
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/tencent_EEDC35FAF2750A3A6A0B39BAE0E2C484860A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the referenced commit, changing the MTU on a running interface no
longer disconnects and reconnects the PHY; __stmmac_release() merely
stops phylink, which also suspends the PHY (BMCR power-down) when WoL
is not enabled. __stmmac_open() then performs the DMA software reset in
stmmac_hw_setup() before phylink_start() resumes the PHY again.
IEEE 802.3 22.2.4.1.5 allows a PHY to stop its receive clock while
powered down, and stmmac requires a running receive clock for the DMA
software reset to complete (the phylink config sets mac_requires_rxc).
On such setups, e.g. the RK3566-based Home Assistant Green with an
RTL8211F-VD PHY in RGMII mode, any runtime MTU change now times out and
leaves the interface dead:
rk_gmac-dwmac fe010000.ethernet end0: Failed to reset the dma
rk_gmac-dwmac fe010000.ethernet end0: stmmac_hw_setup: DMA engine initialization failed
rk_gmac-dwmac fe010000.ethernet end0: __stmmac_open: Hw setup failed
rk_gmac-dwmac fe010000.ethernet end0: failed reopening the interface after MTU change
In the field this is triggered by NetworkManager applying an MTU while
activating the connection, breaking networking entirely. The same
regression has also been reported on i.MX8MP and reproduced on SoCFPGA
based systems.
Resume the PHY in __stmmac_open() before the hardware setup, making it
the counterpart of the phylink_stop() in __stmmac_release(), like
stmmac_resume() already does for the same reason. phylink_start() also
resumes the PHY, but only after stmmac_hw_setup(), and it cannot be
moved before the hardware setup since it may bring the link up
immediately from a workqueue, racing with the initialization (see the
comment in stmmac_resume()). For the regular ndo_open path the PHY has
just been attached and is not suspended, in which case
phylink_prepare_resume() does nothing.
Fixes: db299a0c09 ("net: stmmac: move PHY handling out of __stmmac_open()/release()")
Link: https://github.com/home-assistant/operating-system/issues/4858
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260803095156.132827-1-stefan@agner.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antonio Quartulli says:
====================
Included fixes:
* use rcu_dereference_bh() instead of rcu_access_pointer() where the
pointer is actually dereferenced
* ensure TCP global variables are initialized before they can be
accessed via netlink (e.g. when attaching a TCP socket)
* actually disable IPv4 redirects on multipeer interfaces (the
previous attempt was a no-op and did not survive netns moves)
* hash a floated peer by its transport identity only, consistently
with the add and lookup paths
* zero the sockaddr padding before learning a floated endpoint so it
does not leak into the by_transp_addr hash key
* ensure the socket is owned by ovpn before dereferencing
sk_user_data
* rehash a peer in the by_transp_addr table when its remote endpoint
is updated via CMD_PEER_SET
* avoid re-adding to the hashtables a peer that was concurrently
removed (use-after-free)
* limit keepalive values to one day to avoid overflowing the
delayed-work delay on 32-bit systems
* add the missing rtnl_link_ops->get_size callback so link messages
account for the nested mode attribute
* tag 'ovpn-net-20260730' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: fix incorrect use of rcu_access_pointer()
ovpn: ensure TCP vars are initialized first
ovpn: disable IPv4 redirects on MP interfaces
ovpn: hash floated peer by transport identity only
ovpn: zero-initialize sockaddr before learning a floated endpoint
ovpn: ensure socket is owned by ovpn before deref sk_user_data
ovpn: rehash peer in by_transp_addr table on CMD_PEER_SET
ovpn: skip rehash for peers already removed from by_id
ovpn: limit keepalive values to one day
ovpn: add missing rtnl_link_ops->get_size callback
====================
Link: https://patch.msgid.link/20260730094624.4102963-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a3 (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits.
Fixes: 8814c4b533 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260803122758.666112-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another challenge with unlocked filters.
There is a short window in tc_new_tfilter where a tcf_proto can be found
and briefly referenced by a totally unrelated, unlocked classifier's request
and cause a race.
Feng created a poc which created this race with two threads, one creating a
u32 filter and other a flower filter in the same chain/prio:
1. Both threads enter tc_new_tfilter, both find the chain empty, both
drop filter_chain_lock
2. u32 finishes tcf_proto_create("u32") first, calls
tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain
3. flower finishes tcf_proto_create("flower") later, calls
tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp
already there, takes a reference on it, destroys flower's own tp_new
and returns u32_tp to the caller.
Flower then hits the kind mismatch check (because it requested for kind
"flower" but tp->ops->kind is "u32") and goes through the errout path
which calls tcf_proto_put() on u32_tp. If the u32 thread has already
gone through its own errout (its change() call failed on the PoC's empty
options) and dropped its create and insert refs, flower's put is the
last one and drops u32_tp's refcnt to zero.
At this point tp->ops->destroy() runs in a context that never took
rtnl_lock. When that happens, it might cause a UAF like the following
(illustrated by the PoC):
[ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393)
[ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524
Call Trace:
u32_init (net/sched/cls_u32.c:393)
tc_new_tfilter (net/sched/cls_api.c:2378)
Allocated by task 526:
u32_init (net/sched/cls_u32.c:378)
tc_new_tfilter (net/sched/cls_api.c:2378)
Freed by task 522:
kfree
u32_destroy (net/sched/cls_u32.c:662)
tcf_proto_destroy (net/sched/cls_api.c:446)
tcf_proto_put (net/sched/cls_api.c:459)
tc_new_tfilter (net/sched/cls_api.c:2459)
Fix this by having tcf_proto_destroy() take rtnl_lock around
tp->ops->destroy() for locked classifiers whenever rtnl is not held.
To explain why I used a temp variable "not_lockless" I'd like to point to a
semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here
for future cleanup if deemed necessary):
The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are
redundant sources of truth for whether rtnl_lock is held. Among the nine
classifier destroy(..rtnl_held..) callbacks, only flower consults the
rtnl_held parameter which it propagates to tc_setup_cb_destroy()
and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic,
fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy()
(u32, bpf, mall) hardcode true always instead of forwarding the parameter.
A future cleanup should remove the rtnl_held parameter from the destroy callback
signature entirely and have callers rely solely on their knowledge whether
they are running in an unlocked context.
Fixes: 12db03b65c ("net: sched: extend proto ops to support unlocked classifiers")
Reported-by: Feng Xue <feng.xue@outlook.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260801125632.360365-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header.
Fixes: 217ac77a3c ("openvswitch: allow L3 netdev ports")
Reported-by: AutonomousCodeSecurity@microsoft.com
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260730222006.118652-1-blbllhy@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
packet_set_ring() updates the RX ring state under sk_receive_queue.lock,
but used to publish the tpacket receive mode through po->prot_hook.func
after releasing that lock. packet_poll() and packet_recvmsg() can then
run the pressure clearing path after the ring has been cleared while
still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference
stale or NULL ring storage.
Move the existing receive hook assignment into the same
sk_receive_queue.lock section as the ring state update. Keep the
assignment otherwise unchanged, including on TX ring reconfiguration, to
avoid adding behavior changes that are not required for the fix.
Serialize packet_recvmsg() pressure clearing with the same queue lock
only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear
and the socket has moved away from tpacket_rcv, packet_set_ring() has
already detached the socket and waited for synchronize_net(), so no new
packet input can set the flag again.
packet_poll() already holds sk_receive_queue.lock, so it uses the new
unlocked helper directly.
Fixes: 2ccdbaa6d5 ("packet: rollover lock contention avoidance")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Link: https://patch.msgid.link/f90b5688311fa278d1361ea8c6be0bf25967d591.1785247446.git.zihanx@nebusec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The sch_cake ACK filter parses packets to find the TCP header and filter
duplicated ACKs if the flow is backlogged. The parsing code contains a
WARN_ON(1) which can be triggered by a malformed IP header in certain
cases. Depending on the system configuration, this leads either to
either spamming dmesg with warnings, or a panic if panic_on_warn is set.
The code already correctly skips the offending packet in the branch that
triggers the warning, so the WARN_ON itself doesn't really serve any
purpose. So just drop it altogether to avoid the inconvenient side
effects.
Fixes: 8b7138814f ("sch_cake: Add optional ACK filter")
Reported-by: Zhiling Zou <zhilinz@nebusec.ai>
Reported-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260729191417.45665-1-toke@toke.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__skb_udp_tunnel_segment() gets the UDP header before ensuring the
tunnel header is in the skb head. If the pull reallocates skb->head,
the saved UDP header pointer is no longer valid.
Get the UDP header after the pull to avoid a potential use-after-free.
Fixes: dbef491ebe ("udp: Use uh->len instead of skb->len to compute checksum in segmentation")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20260730093554.68127-1-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by
a user-supplied length (udata_len) without checking a lower bound, then
set udata_offset to a fixed non-zero value and pass both to a reply
callback. The callback bounds-checks the copy with
if ((udata_len - udata_offset) < len)
Both fields are u32, so a udata_len smaller than udata_offset makes the
subtraction wrap and the check pass, and the following memcpy() writes
past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from
kzalloc(), which the existing NULL check does not catch.
Reject buffers smaller than udata_offset before allocating, so the
callback subtraction can no longer underflow.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260730142216.218309-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present.
Fixes: d15662682d ("ipv4: Allow ipv6 gateway with ipv4 routes")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/6f53fa797fcaeb26966432ed7ae9bb87c4961f37.1785411220.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_rx_splice() passes pages to splice_to_pipe() before taking the
references that cover the lifetime of each splice entry. In the
VM-backed RMB path, splice_to_pipe() may drop unqueued entries through
smc_rx_spd_release(), while queued entries are released later via the
pipe buffer callback.
The old post-splice accounting also derives the number of queued VM pages
from an offset mutated while building the descriptor, and a multi-page
splice pairs one sock_hold() with multiple sock_put() calls.
Take the page and socket references for every candidate entry before
splice_to_pipe(), and drop the matching private state, page reference,
and socket reference from smc_rx_spd_release() for entries that never
get queued. This fixes a refcount imbalance that can underflow page
refcounts and trigger a use-after-free.
Fixes: 9014db202c ("smc: add support for splice()")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Co-developed-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Daming Li <d4n.for.sec@gmail.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260730145552.360287-2-enjou1224z@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If allocation of auxr_dev fails during auxiliary device setup, the error
path calls auxiliary_device_uninit(), which eventually invokes
bnge_aux_dev_release().
The release callback unconditionally dereferences aux_priv->auxr_dev->pdev
to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated
on this failure path, the dereference results in a NULL pointer exception
Retrieve the parent bnge_dev from the auxiliary device's parent instead of
auxr_dev, and free auxr_dev only when it was successfully allocated. This
allows the release callback to correctly clean up partially initialized
auxiliary devices.
Fixes: 8ac050ec3b ("bng_en: Add RoCE aux device support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Link: https://patch.msgid.link/20260731192301.1427645-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the interface has NETIF_F_SG enabled and skb_linearize() fails in
ax88179_tx_fixup(), the function returns NULL without freeing the skb.
usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop
(info->flags does not set FLAG_MULTI_PACKET for this driver), jumping
to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`.
Because tx_fixup() returned NULL, the local skb variable in
usbnet_start_xmit() is NULL, so the original skb is never freed — a
memory leak on every TX frame whose linearization fails (i.e. under
memory pressure).
Free the skb before returning, matching the error handling already used
for the pskb_expand_head() failure path in the same function.
Fixes: 16b1c4e01c ("net: usb: ax88179_178a: add TSO feature")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Link: https://patch.msgid.link/20260729030436.3420477-1-cong.yi@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stanislav Fomichev says:
====================
xsk: harden TX metadata validation against races
Cen Zhang reported a KASAN out-of-bounds read when AF_XDP is configured
with a TX metadata area smaller than struct xsk_tx_metadata. The metadata
is also shared with user space, so reading its flags more than once can
produce inconsistent validation and processing decisions.
Require enough space for the flags and one request field, validate the
launch-time field against the configured metadata length, and use one
snapshot of the flags while processing each request. Carry the validated
decision through completion handling so later user-space changes cannot
enable an unrequested completion timestamp.
Reported-by: AutonomousCodeSecurity@microsoft.com
Reported-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Link: https://lore.kernel.org/netdev/20260720155210.34229-1-blbllhy@gmail.com/
====================
Link: https://patch.msgid.link/20260727161959.885642-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xsk_tx_metadata_request() must validate metadata with
xsk_buff_valid_tx_metadata(), which is defined in xdp_sock_drv.h. Move the
helper there before adding that dependency. All callers already include
the destination header, so this has no functional effect.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Launch-time metadata extends beyond the first 16 bytes of struct
xsk_tx_metadata. Reject the request when the registered metadata area does
not contain the complete field.
Snapshot the validated flags for the generic transmit path and use that
snapshot for request and completion processing, avoiding inconsistent
decisions if user space changes the flags concurrently.
Note that only xsk_skb_metadata is properly using the flags,
__xsk_buff_get_metadata ignores them. Next commits address that.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
User space can change metadata flags after request processing. Rereading
them during completion can therefore make the kernel write a timestamp
that was not requested when the packet was submitted.
Clear the metadata pointer during request processing unless timestamp
completion is requested. Completion handling can then use the pointer
itself instead of rereading the flags.
On the mlx5 multi-packet WQE path metadata is evaluated per batch:
xsk_tx_metadata_request() runs only for the descriptor that starts a
session, just like the checksum offload that is applied once through the
shared WQE. Only that descriptor's pointer is reset, so completion
handling can record a timestamp for the other descriptors of the session
regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays
inside the metadata area; the single-WQE, other zero-copy, and generic
paths reset the pointer per descriptor and are unaffected.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Completion handling needs to know whether a timestamp was requested when
the metadata was processed. Let xsk_tx_metadata_request() update the
caller's metadata pointer so that decision can be carried forward without
rereading user-controlled flags.
This only changes the interface; behavior remains unchanged.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Weiming Shi says:
====================
vsock/virtio: fix worker access after virtqueue teardown
Virtio-vsock workers can remain queued while freeze deletes the
virtqueues. This series prevents workers delayed across freeze and
restore from retaining pointers to deleted queues, and prevents the RX
worker from refilling its queue after teardown.
====================
Link: https://patch.msgid.link/cover.1785352330.git.bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b917507e5a ("vsock/virtio: stop workers during the .remove()")
made the RX worker jump to its common exit when rx_run is clear. That
exit still refills the RX queue when the buffer count is low, so work
queued across virtio_vsock_vqs_del() can add buffers after the virtqueues
have been deleted.
BUG: KASAN: slab-use-after-free in virtqueue_add_sgs
Read of size 4 by task kworker/0:1
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796)
virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332)
virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Freed by task 141:
kfree (mm/slub.c:6566)
vp_del_vq (drivers/virtio/virtio_pci_common.c:259)
vp_del_vqs (drivers/virtio/virtio_pci_common.c:285)
virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912)
virtio_device_freeze (drivers/virtio/virtio.c:658)
virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601)
pci_pm_freeze (drivers/pci/pci-driver.c:1098)
device_suspend (drivers/base/power/main.c:1968)
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Jump to a no-refill exit when rx_run is clear, leaving the normal exit
to replenish a running queue.
Fixes: b917507e5a ("vsock/virtio: stop workers during the .remove()")
Cc: stable@vger.kernel.org
Reported-by: Xiang Mei <xmei5@asu.edu>
Link: https://lore.kernel.org/r/20260727035804.1860862-1-bestswngs@gmail.com
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/f9c8c1d64cad9d262f305d02ffe164c2f900fadf.1785352330.git.bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a small memory leak in bnxt_queue_mem_alloc:
when bnxt_alloc_rx_agg_bmap() succeeds
but bnxt_alloc_one_tpa_info() later fails,
the rx_agg_bmap allocated by bnxt_alloc_rx_agg_bmap()
is not freed in the fallthrough cleanup cases.
Free the rx_agg_bmap in the err_free_rx_agg_ring case
and initialize clone->rx_agg_bmap = NULL earlier in the function
to allow for safe fallthrough.
Fixes: bd649c5cc9 ("bnxt_en: handle tpa_info in queue API implementation")
Signed-off-by: Will Chen <will.chen.tty@gmail.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260729220132.1256924-1-will.chen.tty@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
