Pull vfs writeback updates from Christian Brauner:
- Fix a race between cgroup_writeback_umount() and inode_switch_wbs()
When a container exits, a race between cgroup_writeback_umount() and
inode_switch_wbs()/cleanup_offline_cgwb() can trigger "VFS: Busy
inodes after unmount" followed by a use-after-free on percpu
counters.
There is a window between inode_prepare_wbs_switch() returning true
(having passed the SB_ACTIVE check and grabbed the inode) and the
subsequent wb_queue_isw() call: if cgroup_writeback_umount() observes
the global isw_nr_in_flight counter as non-zero but flush_workqueue()
finds nothing queued yet, it returns early - leaving a held inode
reference that blocks evict_inodes() and a later iput() that hits
freed percpu counters.
The race is closed by covering the window from
inode_prepare_wbs_switch() through wb_queue_isw() with an RCU
read-side critical section and synchronizing in the umount path.
On top of that the now-dead rcu_barrier() left over from the
queue_rcu_work() era is removed, and the global
synchronize_rcu()/flush_workqueue() pair is replaced with a per-sb
in-flight counter plus pin/unpin/drain helpers so umount no longer
serializes against switch activity on unrelated superblocks.
Under cgroup writeback churn on a 16 vCPU guest this takes umount
latency from ~92-138ms p50 down to ~5-8ms p50 and the cumulative cost
of cgroup_writeback_umount() from ~62ms to ~4us per call.
The initial race fix is kept separate and minimal so it backports
cleanly to stable trees that still queue switches via
queue_rcu_work().
- Improve write performance with RWF_DONTCACHE
Dirty DONTCACHE pages are now tracked per bdi_writeback so that the
writeback flusher can be kicked in a targeted fashion for
IOCB_DONTCACHE writes instead of relying on global writeback, and the
PG_dropbehind flag is preserved when a folio is split.
* tag 'vfs-7.2-rc1.writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
mm: kick writeback flusher for IOCB_DONTCACHE with targeted dirty tracking
mm: track DONTCACHE dirty pages per bdi_writeback
mm: preserve PG_dropbehind flag during folio split
writeback: use a per-sb counter to drain inode wb switches at umount
writeback: drop now-unnecessary rcu_barrier() in cgroup_writeback_umount()
writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs()
Pull vfs superblock updates from Christian Brauner:
"This retires sget().
CIFS plus the two ext4 KUnit tests (extents-test, mballoc-test) were
the last in-tree callers, and all three convert cleanly to sget_fc().
That lets sget() and its prototype come out, taking ~60 lines that
only existed to be kept in lockstep with sget_fc() on every
publish-path change"
* tag 'vfs-7.2-rc1.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: retire sget()
smb: client: convert cifs_smb3_do_mount() to sget_fc()
ext4: convert mballoc KUnit test to sget_fc()
ext4: convert extents KUnit test to sget_fc()
Pull openat2 updates from Christian Brauner:
"Features:
- Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
descriptor from an O_PATH file descriptor it is possible to use
openat(fd, ".", O_DIRECTORY) for directories, but other file types
require going through open("/proc/<pid>/fd/<nr>") and thus depend
on a functioning procfs.
With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
is set at path resolution time, allowing to reopen the file behind
the file descriptor directly. Selftests are included.
- Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
anything but regular files with the new EFTYPE error code.
This implements the "ability to only open regular files" feature
requested by userspace via uapi-group.org and protects services
from being redirected to fifos, device nodes, and friends.
All atomic_open implementations were audited for OPENAT2_REGULAR
handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
cifs/smb - these are the filesystems whose atomic_open can
encounter an existing non-regular file and would otherwise call
finish_open() on it or return a misleading error code.
The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
call finish_open() on freshly created files and use
finish_no_open() for lookup hits, letting the VFS catch non-regular
files via the do_open() safety net.
Cleanups:
- Migrate the openat2 selftests to the kselftest harness and move
them under selftests/filesystems/. The tests were written in the
early days of selftests' TAP support and the modern kselftest
harness is much easier to follow and maintain. The contents of the
tests are unchanged and the new emptypath tests are ported on top.
- Make the LAST_XXX last-type constants private to fs/namei.c. The
only user outside of fs/namei.c was ksmbd which only needs to know
whether the last component is a regular one, so
vfs_path_parent_lookup() now performs the LAST_NORM check
internally. The ints are replaced with a dedicated enum last_type"
* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: replace ints with enum last_type for LAST_XXX
vfs: make LAST_XXX private to fs/namei.c
selftests: openat2: port emptypath_test to kselftest harness
kselftest/openat2: test for OPENAT2_REGULAR flag
openat2: new OPENAT2_REGULAR flag support
openat2: introduce EFTYPE error code
selftest: add tests for O_EMPTYPATH
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
selftests: openat2: migrate to kselftest harness
selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
selftests: openat2: move helpers to header
selftests: move openat2 tests to selftests/filesystems/
Pull misc kernel updates from Christian Brauner:
"Fixes
- rhashtable: give each instance its own lockdep class
syzbot reported a circular locking dependency between ht->mutex and
fs_reclaim via the simple_xattrs rhashtable being torn down during
inode eviction.
The predicted deadlock cannot occur: rhashtable_free_and_destroy()
cancels the deferred worker before taking ht->mutex and
acquisitions on distinct rhashtables are on distinct mutexes.
Lockdep flags a cycle anyway because every ht->mutex in the kernel
shared the single static lockdep class from
rhashtable_init_noprof().
The lockdep key is lifted to a per-call-site static key so every
rhashtable instance gets its own class.
- selftests/clone3: fix misuse of the libcap library interface in the
cap_checkpoint_restore test and remove unused variables
- selftests/pid_namespace: compute the pid_max test limits
dynamically instead of hardcoding values below the kernel-enforced
minimum of PIDS_PER_CPU_MIN * num_possible_cpus() which made the
tests fail on machines with many possible CPUs
- selftests: fix the Makefile TARGETS entry for nsfs which wasn't
adjusted when the tests moved under filesystems/
Cleanups
- ipc/sem.c: use unsigned int for nsops to match the declaration in
syscalls.h"
* tag 'kernel-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/clone3: remove unused variables
selftests/clone3: fix libcap interface usage
ipc/sem.c: use unsigned int for nsops
selftests: Fix Makefile target for nsfs
rhashtable: give each instance its own lockdep class
selftests/pid_namespace: compute pid_max test limits dynamically
Pull task_exec_state updates from Christian Brauner:
"This introduces a new per-task task_exec_state structure and relocates
the dumpable mode and the user namespace captured at execve() from
mm_struct onto it. It stays attached to the task for its full
lifetime.
__ptrace_may_access() and several /proc owner and visibility checks
need to consult two pieces of state for any observable task, including
zombies that have already gone through exit_mm(): the dumpable mode
and the user namespace captured at execve(). Both live on mm_struct
today, which exit_mm() clears from the task long before the task is
reaped. A reader that races with do_exit() observes task->mm == NULL
and either fails the check or falls back to init_user_ns - which
denies legitimate access to non-dumpable zombies that were running in
a nested user namespace.
mm_struct loses ->user_ns and the dumpability bits in ->flags.
MMF_DUMPABLE_BITS is reserved so the MMF_DUMP_FILTER_* layout exposed
via /proc/<pid>/coredump_filter stays stable. task->user_dumpable and
its exit_mm() snapshot are removed.
task_exec_state is the privilege domain established by an execve().
Within a thread group it is shared via refcount; across thread groups
each task has its own:
- CLONE_VM siblings (thread-group members, io_uring workers)
refcount-share the parent's exec_state.
- Non-CLONE_VM clones (fork(), vfork() without CLONE_VM) allocate a
fresh exec_state inheriting the parent's dumpable mode and user_ns.
- execve() in the child allocates a fresh instance and installs it
under task_lock + exec_update_lock via task_exec_state_replace().
- Credential changes (setresuid, capset, ...) and
prctl(PR_SET_DUMPABLE) update dumpability on the current task's
exec_state, i.e., on the thread group's shared instance.
On top of this exec_mmap() no longer tears down the old mm while
holding exec_update_lock for writing and cred_guard_mutex. Neither
lock is needed for that: exec_update_lock only exists to make the mm
swap atomic with the later commit_creds() and all its readers operate
on the new mm; none looks at the detached old mm.
The cost was real: __mmput() runs exit_mmap() over the entire old
address space and can block in exit_aio() waiting for in-flight AIO,
so execve() of a large process blocked ptrace_attach() and every
exec_update_lock reader for the duration of the teardown.
The old mm is now stashed in bprm->old_mm and released from
setup_new_exec() after both locks are dropped, with a backstop in
free_bprm() for the error paths"
* tag 'kernel-7.2-rc1.task_exec_state' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
exec: free the old mm outside the exec locks
exec_state: relocate dumpable information
ptrace: add ptracer_access_allowed()
exec: introduce struct task_exec_state
sched/coredump: introduce enum task_dumpable
Pull vfs casefolding updates from Christian Brauner:
"This exposes the case folding behavior of local filesystems so that
file servers - nfsd, ksmbd, and user space file servers - can report
the actual behavior to clients instead of guessing.
Filesystems report case-insensitive and case-nonpreserving behavior
via new file_kattr flags in their fileattr_get implementations. fat,
exfat, ntfs3, hfs, hfsplus, xfs, cifs, nfs, vboxsf, and isofs are
wired up. Local filesystems that are not explicitly handled default to
the usual POSIX behavior of case-sensitive and case-preserving.
nfsd uses this to report case folding via NFSv3 PATHCONF and to
implement the NFSv4 FATTR4_CASE_INSENSITIVE and FATTR4_CASE_PRESERVING
attributes - both have been part of the NFS protocols for decades to
support clients on non-POSIX systems - and ksmbd reports it via
FS_ATTRIBUTE_INFORMATION. Exposing the information through the
fileattr uapi covers user space file servers.
The immediate motivation is interoperability: Windows NFS clients
hard-require servers to report case-insensitivity for Win32
applications to work correctly, and a client that knows the server is
case-insensitive can avoid issuing multiple LOOKUP/READDIR requests
searching for case variants.
The Linux NFS client already grew support for case-insensitive shares
years ago in support of the Hammerspace NFS server - negative dentry
caching must be disabled (a lookup for "FILE.TXT" failing must not
cache a negative entry when "file.txt" exists) and directory change
invalidation must drop cached case-folded name variants. Such servers
often operate in multi-protocol environments where a single file
service instance caters to both NFS and SMB clients, and nfsd needs to
report case folding properly to participate as a first-class citizen
there.
A follow-up series brings fixes for the initial work: the nfsd
case-info probe now uses kernel credentials, maps -ESTALE to
NFS3ERR_STALE, and has its cost capped across READDIR entries; the nfs
client avoids transiently zeroed case capability bits during the probe
and skips the pathconf probe when neither field is consumed; the
FS_CASEFOLD_FL semantics are clarified in the UAPI header; and the
tools UAPI headers are synced"
* tag 'vfs-7.2-rc1.casefold' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
nfsd: Cap case-folding probe cost across READDIR entries
nfsd: Map -ESTALE from case probe to NFS3ERR_STALE
nfsd: Use kernel credentials for case-info probe
fs: Clarify FS_CASEFOLD_FL semantics in UAPI header
nfs: Skip pathconf probe when neither field is consumed
nfs: Avoid transient zeroed case capability bits during probe
tools headers UAPI: Sync case-sensitivity flags from linux/fs.h
ksmbd: Report filesystem case sensitivity via FS_ATTRIBUTE_INFORMATION
nfsd: Implement NFSv4 FATTR4_CASE_INSENSITIVE and FATTR4_CASE_PRESERVING
nfsd: Report export case-folding via NFSv3 PATHCONF
isofs: Implement fileattr_get for case sensitivity
vboxsf: Implement fileattr_get for case sensitivity
nfs: Implement fileattr_get for case sensitivity
cifs: Implement fileattr_get for case sensitivity
xfs: Report case sensitivity in fileattr_get
hfsplus: Report case sensitivity in fileattr_get
hfs: Implement fileattr_get for case sensitivity
ntfs3: Implement fileattr_get for case sensitivity
exfat: Implement fileattr_get for case sensitivity
fat: Implement fileattr_get for case sensitivity
...
Pull vfs directory delegations from Christian Brauner:
"This contains the VFS prerequisites for supporting directory
delegations in nfsd via CB_NOTIFY callbacks.
The filelock core gains support for ignoring delegation breaks for
directory change events together with an inode_lease_ignore_mask()
helper, and fsnotify gains fsnotify_modify_mark_mask() and a
FSNOTIFY_EVENT_RENAME data type.
With this in place nfsd can request delegations on directories and set
up inotify watches to trigger sending CB_NOTIFY events to clients
instead of having every directory change break the delegation.
New tracepoints are added to fsnotify() and to the start of
break_lease(), and trace_break_lease_block() is passed the currently
blocking lease instead of the new one.
A follow-up fix moves the LEASE_BREAK_* flags out of
#ifdef CONFIG_FILE_LOCKING to fix the build for CONFIG_FILE_LOCKING=n
configurations"
* tag 'vfs-7.2-rc1.directory.delegations' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
filelock: move LEASE_BREAK_* flags out of #ifdef CONFIG_FILE_LOCKING
fsnotify: add FSNOTIFY_EVENT_RENAME data type
fsnotify: add fsnotify_modify_mark_mask()
fsnotify: new tracepoint in fsnotify()
filelock: add an inode_lease_ignore_mask helper
filelock: add a tracepoint to start of break_lease()
filelock: add support for ignoring deleg breaks for dir change events
filelock: pass current blocking lease to trace_break_lease_block() rather than "new_fl"
Pull vfs inode updates from Christian Brauner:
"This extends the lockless ->i_count handling.
iput() could already decrement any value greater than one locklessly
but acquiring a reference always required taking inode->i_lock. Now
acquiring a reference is lockless as long as the count was already at
least 1, i.e., only the 0->1 and 1->0 transitions take the lock.
This avoids the lock for the common cases of nfs calling into the
inode hash and btrfs using igrab(). Cleanup-wise icount_read_once() is
added to line up with inode_state_read_once() and the open-coded
->i_count loads across the tree are converted, and ihold() is
relocated and tidied up.
On top of that some stale lock ordering annotations are retired from
the inode hash code: iunique() no longer takes the hash lock since the
inode hash became RCU-searchable and s_inode_list_lock is no longer
taken under the hash lock either"
* tag 'vfs-7.2-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: retire stale lock ordering annotations from inode hash
fs: allow lockless ->i_count bumps as long as it does not transition 0->1
fs: relocate and tidy up ihold()
fs: add icount_read_once() and stop open-coding ->i_count loads
Pull exportfs updates from Christian Brauner:
"This cleans up the exportfs support for block-style layouts that
provide direct block device access: the operations for layout-based
block device access are split out of struct export_operations into a
separate header, ->commit_blocks() no longer takes a struct iattr
argument, and the way support for layout-based block device access is
detected is reworked.
nfsd's blocklayout code also stops honoring loca_time_modify. This is
preparation for supporting export of more than a single device per
file system"
* tag 'vfs-7.2-rc1.exportfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
exportfs,nfsd: rework checking for layout-based block device access support
exportfs: don't pass struct iattr to ->commit_blocks
exportfs: split out the ops for layout-based block device access
nfsd/blocklayout: always ignore loca_time_modify
Pull bpf filesystem kfunc fix from Christian Brauner:
"The bpf_set_dentry_xattr() and bpf_remove_dentry_xattr() kfuncs locked
the inode of the supplied dentry without checking whether the dentry
is negative.
Passing a negative dentry (e.g., from security_inode_create) caused a
NULL pointer dereference. Negative dentries now fail with EINVAL. The
WARN_ON(!inode) in the bpf xattr permission helpers is dropped as well
since it could be triggered the same way, amounting to a denial of
service on systems with panic_on_warn enabled"
* tag 'vfs-7.2-rc1.kfunc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a value the device
controls. A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.
Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do.
Fixes: 11ea3173d5 ("Input: add driver for Touchwin serial touchscreens")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260613-b4-disp-69921bfd-v1-1-82c036899959@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use an additional label so that a bit of common code can be better reused
at the end of this function implementation.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use an additional label so that a bit of exception handling can be better
reused at the end of this function implementation.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer.
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Cc: stable@kernel.org
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cifs_xattr_get() function returns type int, not ssize_t so
declare "rc" as int as well. This has no effect on runtime.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The CIFS FS_IOC_SETFLAGS path can set FS_COMPR_FL now, but it cannot
clear it again. This can be reproduced on a share backed by a filesystem
that supports compression, for example btrfs exported by Samba:
[compress_share]
vfs objects = btrfs
$ touch test.bin
$ chattr +c test.bin
$ lsattr test.bin
$ chattr -c test.bin
The final chattr -c fails with EOPNOTSUPP, and leaves the remote object
with the compressed attribute still set, because the client always sends
FSCTL_SET_COMPRESSION with COMPRESSION_FORMAT_DEFAULT. That is correct
for setting FS_COMPR_FL, but clearing FS_COMPR_FL requires sending
COMPRESSION_FORMAT_NONE.
Fix this by passing the requested compression state through the
set_compression operation. The SMB1 and SMB2 helpers no longer hard-code
COMPRESSION_FORMAT_DEFAULT.
When FS_COMPR_FL is set, send COMPRESSION_FORMAT_DEFAULT. When it is
cleared, send COMPRESSION_FORMAT_NONE. If the server accepts the request,
update the cached FILE_ATTRIBUTE_COMPRESSED bit under i_lock so
FS_IOC_GETFLAGS reports the new state.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Setting the compressed flag on a CIFS mount can fail with -EACCES:
[compress_share]
vfs objects = btrfs
$ touch test.bin
$ chattr +c test.bin
chattr: Permission denied while setting flags on test.bin
This can be reproduced against a Samba share backed by a filesystem that
supports compression, such as btrfs.
FS_IOC_SETFLAGS is issued on the file handle opened by userspace. chattr
opens the target read-only before setting FS_COMPR_FL, so the SMB client
currently sends FSCTL_SET_COMPRESSION on a handle that may not have
FILE_WRITE_DATA access. Samba requires FILE_WRITE_DATA for
FSCTL_SET_COMPRESSION and rejects the request.
Use the current handle only if it already has FILE_WRITE_DATA. Otherwise
try an existing writable handle for the inode. If none is available, open
a temporary FILE_WRITE_DATA handle for the compression request.
After FSCTL_SET_COMPRESSION succeeds, update the cached compressed
attribute immediately, matching how smb2_set_sparse() updates
FILE_ATTRIBUTE_SPARSE_FILE after a successful FSCTL_SET_SPARSE.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, repeated lsattr calls on a regular CIFS file without the
compressed attribute may show random flags:
$ touch test.bin
$ lsattr test.bin
s-S-ia-A-EjI---------m test.bin
$ lsattr test.bin
------d-cEjI---------m test.bin
The lsattr reproducer depends on the previous contents of its userspace
buffer, so it may not reproduce on every setup. A deterministic
reproducer is to initialize the ioctl argument before FS_IOC_GETFLAGS
on a file without the compressed attribute:
int flags = 0x7fffffff;
ioctl(fd, FS_IOC_GETFLAGS, &flags);
On an affected kernel, flags remains 0x7fffffff. With the fix, it is
set to 0.
This happens because when the cached inode does not have the compressed
bit set, the CIFS fallback path in FS_IOC_GETFLAGS returns success
without calling put_user() to write the zero flags value into the user
buffer. As a result, the caller observes stale contents from its own
buffer.
Fix this by always writing the visible flags value back to the user
buffer before returning success, even when the value is zero.
Fixes: 64a5cfa6db ("Allow setting per-file compression via SMB2/3")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a lease allows CIFS to use cached inode attributes, getattr may
return the locally cached attributes instead of revalidating them from
the server. After local writes extend a file, the write path updates the
file size, but i_blocks can remain based on the old allocation size.
For example, while the file is still open after two contiguous writes,
the local block count can remain smaller than the written range:
after first write: st_size = 4096, st_blocks = 7
after second write: st_size = 12288, st_blocks = 21
after close: st_size = 12288, st_blocks = 24
This can make a fully written file look sparse:
i_blocks * 512 < i_size
and can cause swap activation to reject a valid write-created swapfile
as having holes. This results in xfstests skipping swap-related tests
on CIFS mounts:
generic/472 [not run] swapfiles are not supported
generic/494 [not run] swapfiles are not supported
generic/497 [not run] swapfiles are not supported
generic/569 [not run] swapfiles are not supported
generic/636 [not run] swapfiles are not supported
generic/643 [not run] swapfiles are not supported
Update the local i_blocks estimate after successful writes, but only
when the write starts at or before the currently known allocated range.
This lets sequential writes grow i_blocks while avoiding treating
write-past-EOF holes as allocated.
Skip the local estimate for files that are already marked sparse, since
their allocation needs to come from the server rather than from a
contiguous-write estimate.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cifsd demultiplex thread can run and access tcp_ses before the parent
thread has finished populating tcp_ses, which the worker thread accesses
locklessly.
Also, the kthread_run macro may start the thread before returning the
thread pointer. Because the pointer is part of the structure that the
thread can access, if the kernel is preempted after the thread is spawned,
but before the thread pointer is populated and the thread attempts to exit,
it will sleep, waiting for a SIGKILL signal.
Fix this by moving creation of the thread to after all of tcp_ses'es
fields are populated, and spawning the thread last, using a split
kthread_create/wake_up_process logic.
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
parse_sid() only verified that the fixed SID header fit in the
returned security descriptor, but did not verify that the full SID
body described by num_subauth was present.
A malicious server can return a truncated owner or group SID whose
header lies within the descriptor buffer while sub_auth[] extends
past the end of the allocation, leading to an out-of-bounds read
when the client later parses or copies that SID.
Validate the full SID body in parse_sid(), centralize owner/group SID
lookup and bounds checking in sid_from_sd(), and use that validation
in parse_sec_desc(), build_sec_desc(), and copy_sec_desc() before
sub_auth[] is accessed.
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_swn_notify() looks up a witness registration by id under
cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's
cached tcon pointer. That pointer is not a lifetime reference, and it is
not a stable representative once cifs_get_swn_reg() lets multiple tcons
for the same net/share name share one registration id.
A same-share second mount can keep the cifs_swn_reg alive after the first
tcon unregisters and is freed. The registration then still points at the
freed first tcon, so taking tc_lock or incrementing tc_count through
swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while
holding cifs_swnreg_idr_mutex also violates the documented CIFS lock
order.
Fix this by making the registration store only the stable witness
identity: id, net name, share name, and notify flags. When a notify
arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex,
then find and pin a live witness tcon that currently matches the net/share
pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification
path uses that pinned tcon directly and drops the reference when done.
Registration and unregister messages now use the live tcon passed by the
caller instead of a cached tcon in the registration. The final unregister
send is folded into cifs_swn_unregister() while the registration is still
protected by cifs_swnreg_idr_mutex. This removes the previous
find/drop/reacquire raw-pointer window. The release path only removes the
idr entry and frees the stable identity strings.
This preserves the intended one-registration/many-tcon behavior: a
registration id represents a net/share pair, and notify handling acts on a
live representative selected at use time. It also preserves CLIENT_MOVE
ordering for the representative tcon because the old-IP unregister is sent
before cifs_swn_register() sends the new-IP register.
Fixes: fed979a7e0 ("cifs: Set witness notification handler for messages from userspace daemon")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Steve French <stfrench@microsoft.com>
Cifs files may be put into fileinfo_put_wq during umounting cifs.
After umount done, cifsFileInfo_put_final is called, which cause
following BUG:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 134.222152] list_lru_add+0x64/0x1a0
[ 134.222399] ? cifs_put_tcon+0x171/0x340 [cifs]
[ 134.222772] d_lru_add+0x44/0x60
[ 134.222997] dput+0x1fc/0x210
[ 134.223213] cifsFileInfo_put_final+0x11a/0x140 [cifs]
[ 134.223576] process_one_work+0x17c/0x320
[ 134.223843] worker_thread+0x188/0x280
[ 134.224084] ? __pfx_worker_thread+0x10/0x10
[ 134.224366] kthread+0xcc/0x100
[ 134.224576] ? __pfx_kthread+0x10/0x10
[ 134.224827] ret_from_fork+0x30/0x50
[ 134.225063] ? __pfx_kthread+0x10/0x10
[ 134.225328] ret_from_fork_asm+0x1b/0x30
This can be reproduce by following:
unshare -n bash -c "
mkdir -p ${CIFS_MNT}
ip netns attach root 1
ip link add eth0 type veth peer veth0 netns root
ip link set eth0 up
ip -n root link set veth0 up
ip addr add 192.168.0.2/24 dev eth0
ip -n root addr add 192.168.0.1/24 dev veth0
ip route add default via 192.168.0.1 dev eth0
ip netns exec root sysctl net.ipv4.ip_forward=1
ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o
${DEV} -j MASQUERADE
mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o
vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1
touch ${CIFS_MNT}/a.txt
ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o
${DEV} -j MASQUERADE
"
umount ${CIFS_MNT}
Fixes: 340cea84f6 ("cifs: open files should not hold ref on superblock")
Signed-off-by: Jian Zhang <zhangjian496@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Apply conflicting option validation consistently across all the new
mount API paths, for both mount and remount.
Some checks were only applied during initial mount validation, while
others were handled during option parsing, causing mount and
remount/reconfigure to behave differently.
Move the conflicting option checks into smb3_handle_conflicting_options()
and call it from the common validation paths, including for
multichannel/max_channels handling.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Today we do not invalidate the cached_dirent or the entire
parent cfid when a dentry in a dir has been removed/moved.
This change invalidates the parent cfid so that we don't serve
directory contents from the cache.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After Dynamic Address Assignment (DAA), there may be cases where
devices have been assigned dynamic addresses on the bus, but are not
successfully registered in the device model. This can happen, for
example, if errors occur during device addition, leaving the bus state
and software state inconsistent.
Introduce a reconciliation step to resolve such inconsistencies.
Scan all address slots marked as I3C devices by the bus, and compare
them against the set of devices currently registered. For any dynamic
address that is marked occupied but has no corresponding i3c_dev_desc,
probe for device presence using a GETSTATUS CCC.
Retry the probe (with exponential backoff delay) to handle transient NACK
conditions. If a device responds, register it via
i3c_master_add_i3c_dev_locked(). Otherwise, free the address
slot so it may be reused in future DAA operations.
Note, i3c_master_add_i3c_dev_locked() may fail (again), in which case the
dynamic address remains marked as occupied. A future DAA will try again.
This also handles a corner case where a device is assigned a dynamic
address but not successfully added, and subsequently loses that address
(e.g. due to power management). If DAA is run again, the device may
receive a new dynamic address while the old one remains marked as
occupied. Repeated occurrences of this scenario could eventually
exhaust the dynamic address space. The reconciliation step ensures that
stale addresses are detected and freed, preventing address leakage.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260612080107.11606-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Relocate i3c_master_do_daa_ext() and i3c_master_do_daa() so they appear
after i3c_master_add_i3c_dev_locked().
This ordering is required for upcoming changes where the DAA flow will
(indirectly) rely on i3c_master_add_i3c_dev_locked() functionality.
Reordering avoids forward dependency issues and keeps related code paths
logically arranged.
No functional change.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260612080107.11606-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
i3c_master_add_i3c_dev_locked() no longer leaves the address marked as
free on failure, so aborting the DAA sequence on its error is unnecessary.
Failure to register a discovered device does not invalidate the entire
Dynamic Address Assignment (DAA) procedure. Align with the behavior of
other I3C master drivers by ignoring errors from
i3c_master_add_i3c_dev_locked() and continuing enumeration.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260612080107.11606-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
i3c_master_add_i3c_dev_locked() is called after a device has already
been assigned a dynamic address. If the function fails, the address
remains marked as free and may be reallocated to another device,
leading to address conflicts on the bus.
Ensure the address is not marked as free on failure, by updating the
address slot state to prevent the address from being re-used.
Emit an error message to inform of the failure.
Opportunistically remove the !master check because it is impossible.
Note, directly resetting the device's dynamic address is no longer
an option, since Direct RSTDAA was deprecated from I3C starting from
version 1.1 and v1.1 (or later) target devices are meant to NACK it.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260612080107.11606-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Disabling IBIs currently returns the result of the DISEC CCC, causing
i3c_hci_disable_ibi() to fail if the transfer errors out.
However, the controller has already been programmed to reject IBIs by
setting DAT_0_SIR_REJECT, so the target’s IBIs are effectively disabled
from the host side regardless of the outcome of the DISEC command. At
this point, teardown of the IBI infrastructure can safely proceed even
if DISEC fails.
Note, from then on, the MIPI I3C HCI not only NACKs the target's IBI but
automatically sends another DISEC command.
Make i3c_hci_disable_ibi() resilient by ignoring the return value of
i3c_master_disec_locked() and always returning success.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260612080107.11606-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by
bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ
handler, which cannot take bus.lock. This allows concurrent device
addition/removal in the I3C core to modify the list while it is being
traversed, potentially leading to use-after-free or crashes.
Remove the dependency on the bus device list and introduce a dedicated
lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained
under hci->lock. Update the array when IBIs are enabled or disabled,
so that it always reflects the set of devices allowed to generate IBIs.
Also update when IBIs are freed, to cover the corner case when an IBI is
freed without first being disabled (e.g. oldedev in
i3c_master_add_i3c_dev_locked()).
Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new
array, and add a lockdep assertion to enforce that hci->lock is held
by callers.
Demote a message in PIO and DMA IBI handling, from an error to a debug
message, because there is a race window when the condition can arise
normally.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260612080107.11606-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Wire the MIPI I3C HCI driver into the I3C core Hot-Join framework to
allow targets to dynamically join the bus after initial DAA.
HCI hardware ACKs or NACKs Hot-Join requests based on
HC_CONTROL.HOT_JOIN_CTRL. This was previously left in the
NACK-and-DISEC state, effectively preventing Hot-Join. Implement
the ->enable_hotjoin() and ->disable_hotjoin() master operations
so the core and user space can control this policy at runtime.
Also issue broadcast ENEC HJ when enabling Hot-Join. This is required
because the controller may have previously DISEC'ed the Hot-Join
event, causing targets that were NACKed once to never retry.
Acknowledged Hot-Join requests are delivered as IBIs on the reserved
address 0x02. Update both the DMA and PIO IBI paths to recognise this
address and forward the event to i3c_master_queue_hotjoin().
To make Hot-Join usable by default, enable it once after the initial
DAA. This is gated by rpm_ibi_allowed, since otherwise keeping Hot-Join
enabled prevents runtime suspend. A new hj_init_done flag ensures this
one-time enablement is not repeated on subsequent DAAs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The existing i3c_master_enec_locked() wrapper always treats a NACKed
ENEC CCC as a failure (M2 error). However, broadcasting ENEC to enable
Hot-Join is legitimately useful even when no I3C devices are currently
present on the bus, in which case the broadcast will be NACKed and
should not be reported as an error.
The underlying helper i3c_master_enec_disec_locked() already accepts a
suppress_m2 flag that lets callers ignore such NACKs. Expose it so that
a subsequent patch enabling Hot-Join events can issue ENEC with M2
suppression.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Master drivers may invoke i3c_master_do_daa_ext() during resume to
re-run Dynamic Address Assignment. As well as assigning addresses to
any newly arrived devices, this restores the dynamic address of devices
that lost it across system suspend, so it has to run as part of the
controller's resume path.
A side effect of i3c_master_do_daa_ext() today is that it also
registers any newly discovered I3C devices with the driver model
inline, via i3c_master_register_new_i3c_devs(). Doing that from the
resume path is problematic: a hot-join-capable device may join the bus
during this same DAA, and registering it immediately would push driver
model work (probing, sysfs, etc.) into the controller's resume context,
where the rest of the system is not yet fully resumed and the
controller driver is still partway through its own resume sequence.
Decouple discovery from registration: add a reg_work work item to
struct i3c_master_controller and have i3c_master_do_daa_ext() queue it
on master->wq (the freezable workqueue) instead of calling
i3c_master_register_new_i3c_devs() directly. The worker performs the
registration only when the controller is not shutting_down, and is
cancelled alongside hj_work in i3c_master_shutdown(). Because wq is
freezable, any newly observed devices end up being registered after
the system has finished resuming.
i3c_master_register() also routes its initial post-bus-init registration
through reg_work, using flush_work() to keep probe-time behavior
synchronous. This keeps a single registration code path and ensures the
worker is the only writer of desc->dev.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The I3C core now installs an i3c_bus_type shutdown callback that
flushes master->hj_work (via i3c_master_shutdown()) before any driver's
platform shutdown hook runs. The explicit cancel_work_sync() in
dw_i3c_shutdown() is therefore redundant: by the time it executes, the
Hot-Join worker has already been cancelled, and the shutting_down gate
makes a new worker a no-op.
Remove the now-unneeded call. No functional change.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
System shutdown invokes each device's bus shutdown callback to quiesce
hardware, but the I3C bus type does not currently implement one. As a
result, on shutdown the controller's Hot-Join work and any in-flight
i3c_master_do_daa() can keep running (or be newly triggered) while the
rest of the system is being torn down.
A similar window exists at i3c_master_unregister() time: cancel_work_sync()
on hj_work prevents queued work from completing, but does not stop a
fresh Hot-Join IBI from re-queueing the worker, nor a concurrent sysfs
writer from toggling Hot-Join via i3c_set_hotjoin().
Introduce a single "shutting down" gate in the I3C core, set under the
bus maintenance lock so it is observed by any in-progress DAA path
before pending work is cancelled. Install an i3c_bus_type shutdown
callback that engages this gate for master devices during system
shutdown, and use the same gate in i3c_master_unregister() so both
paths get identical guarantees.
Once the gate is engaged, the Hot-Join worker, i3c_master_do_daa_ext()
and i3c_set_hotjoin() all bail out cleanly, so Hot-Join IBIs that race
with shutdown become no-ops, direct DAA callers see -ENODEV, and sysfs
writers can no longer re-enable Hot-Join through ops->enable_hotjoin()
while the controller is going away.
No functional change for the steady-state runtime path; the new checks
only take effect once the controller has been marked as shutting down.
Note, this patch depends on patch "i3c: master: Consolidate Hot-Join DAA
work in the core".
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Three master drivers (dw-i3c-master, i3c-master-cdns, svc-i3c-master)
each carry an essentially identical Hot-Join handler: a struct
work_struct embedded in their private state, a work function that just
calls i3c_master_do_daa() on the embedded i3c_master_controller, plus
matching INIT_WORK()/cancel_work_sync() boilerplate in probe/remove (and
shutdown for dw-i3c). The IBI/ISR paths then queue that work onto
master->wq, which already lives in the core.
Move this pattern into the I3C core:
- Add struct work_struct hj_work to struct i3c_master_controller and
initialise it in i3c_master_register() with a core-provided handler
i3c_master_hj_work_fn() that performs i3c_master_do_daa().
- Cancel the work in i3c_master_unregister() so all controllers get
correct teardown ordering against the workqueue for free.
- Export i3c_master_queue_hotjoin() as the single entry point drivers
call from their Hot-Join IBI handler.
Convert the three existing users to the new API: drop their private
hj_work fields, work functions, INIT_WORK() and cancel_work_sync()
calls, and replace the queue_work(master->wq, &drv->hj_work) call sites
with i3c_master_queue_hotjoin(&drv->base). The dw-i3c shutdown path
still needs to flush pending Hot-Join work before tearing down the
hardware, so it is updated to cancel master->base.hj_work directly.
No functional change intended: the work is still queued on the same
master->wq, runs the same i3c_master_do_daa(), and is cancelled at
controller teardown. Future Hot-Join improvements now only need to
be made in one place.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
i3c_set_hotjoin() dispatches the controller's enable_hotjoin() or
disable_hotjoin() op and updates master->hotjoin under
i3c_bus_normaluse_lock(). That lock is a read-side acquisition of
bus->lock (down_read()), so it does not exclude concurrent callers.
The hotjoin sysfs attribute can be opened multiple times, and writes
through different opens are not serialized. Two concurrent writers
to "hotjoin" can therefore race in i3c_set_hotjoin(), with the
controller op and the master->hotjoin store from one call interleaving
with the other. The hardware enable/disable state and the value reported
by hotjoin_show() can end up out of sync.
Take i3c_bus_maintenance_lock() instead. Toggling Hot Join enable
changes bus state and is conceptually a maintenance operation, so the
write-side acquisition of bus->lock is the appropriate lock and
serializes concurrent callers against each other and against other
maintenance operations.
Fixes: 317bacf960 ("i3c: master: add enable(disable) hot join in sys entry")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The I3C master workqueue (master->wq) is used to defer work that needs
thread context and the bus maintenance lock, most notably Hot Join
processing (which calls i3c_master_do_daa() to assign dynamic addresses
to newly joined devices).
Currently the workqueue keeps running across system suspend, which can
race with the suspend path:
- do_daa() may execute after the controller has been suspended,
issuing bus transactions on a powered-down or otherwise unusable
controller.
- New I3C devices can be enumerated and added to the bus mid-suspend,
registering driver model objects at a point where the I3C subsystem
and its consumers are not prepared to handle them.
Mark the workqueue WQ_FREEZABLE so its workers are frozen for the
duration of system suspend/hibernate and resumed afterwards. This
naturally defers any pending or newly queued Hot Join work until the
system (and the controller) is fully resumed, closing both races
without adding explicit suspend/resume synchronization in the master
drivers.
Update the kerneldoc for struct i3c_master_controller::wq to reflect
that the workqueue is freezable.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tests that:
- Quiet flag works on network rules
- Quiet flag applied to unrelated ports has no effect
- Denied access not in quiet_access_net is still logged
This is not as thorough as the fs tests, but given the shared logic it
should be sufficient. There is also no "optional" access for network
rules.
Signed-off-by: Tingmao Wang <m@maowtm.org>
Assisted-by: GitHub-Copilot:claude-opus-4.7 copilot-review
Link: https://patch.msgid.link/364fbd08081318d64bc23049d3a7721f0a3a3624.1781228815.git.m@maowtm.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Test various interactions of the quiet flag with filesystem rules:
- Non-optional access (tested with open and rename).
- Optional access (tested with truncate and ioctl).
- Behaviour around mounts matches with normal Landlock rules.
- Behaviour around disconnected directories matches with normal Landlock
rules (test expected behaviour of 9a868cdbe66a ("landlock: Fix
handling of disconnected directories") applied to the collected quiet
flag).
- Multiple layers works as expected.
Assisted-by: GitHub-Copilot:claude-opus-4.6 copilot-review
Signed-off-by: Tingmao Wang <m@maowtm.org>
Link: https://patch.msgid.link/0f304507dd3ebccc753e1580456bdfc909012357.1781228815.git.m@maowtm.org
[mic: Fix comment formatting]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Linus Torvalds
Bryam Vargas
Alexei Starovoitov
Manikandan Muralidharan
Uwe Kleine-König (The Capable Hub)
Markus Elfring
Dan Carpenter
Huiwen He
Fredric Cover
Qihang
Michael Bommarito
Jian Zhang
Henrique Carvalho
Shyam Prasad N
Adrian Hunter
Tingmao Wang