The XFRM compat layer (CONFIG_XFRM_USER_COMPAT) translates 32-bit xfrm
netlink and setsockopt messages into the native 64-bit layout. It is
only needed on architectures where the 32-bit and 64-bit ABIs disagree
on u64 alignment, which the kernel encodes as COMPAT_FOR_U64_ALIGNMENT.
That symbol is defined only by arch/x86. XFRM_USER_COMPAT depends on it,
so the translator can never be built on any other architecture,
including arm64, which still provides a 32-bit compat ABI (CONFIG_COMPAT)
for AArch32 EL0 userspace. On arm64 the AArch32 EABI already aligns u64
to 8 bytes, identical to the AArch64 ABI, so no translation is required
and the native code path is correct for 32-bit tasks.
However, xfrm_user_rcv_msg() and xfrm_user_policy() gate on
in_compat_syscall() alone and then call xfrm_get_translator(), which
returns NULL when no translator is registered. On arm64 that is always
the case, so every xfrm netlink message and the XFRM_POLICY setsockopt
issued by a 32-bit task returns -EOPNOTSUPP. A 32-bit userspace process
on arm64 (and on any other arch with CONFIG_COMPAT but without
COMPAT_FOR_U64_ALIGNMENT) therefore cannot configure XFRM state or
policy through the XFRM_USER netlink API, and cannot use the XFRM_POLICY
setsockopt path, because both fail before reaching the native parser.
The translator series replaced the blanket compat rejection with a
translator lookup. That made the path usable on x86 when the translator
is available, but left architectures that cannot build the translator
permanently rejected even when their compat layout already matches the
native layout. Let those architectures use the native parser instead.
Gate the translator requirement on COMPAT_FOR_U64_ALIGNMENT instead of
on in_compat_syscall() alone. Gating on the ABI property rather than on
CONFIG_XFRM_USER_COMPAT is deliberate: on x86 with IA32_EMULATION=y but
XFRM_USER_COMPAT=n, a 32-bit task must still be rejected rather than
routed through the native parser, which would misread genuinely
4-byte-aligned x86-32 messages. COMPAT_FOR_U64_ALIGNMENT is the ABI
property that makes the XFRM translator mandatory.
Only the receive/input direction needs the guard. The send, dump and
notification paths already call the translator as "if (xtr) { ... }"
with no error on NULL, so on arches without a translator they no-op and
the kernel emits native 64-bit-layout messages, which is what an AArch32
task expects.
Tested on Juniper SRX hardware: with the fix, 32-bit IPsec userspace
netlink and XFRM_POLICY setsockopt operations that previously failed
with -EOPNOTSUPP now succeed; x86 behaviour is unchanged by inspection.
Fixes: 5106f4a8ac ("xfrm/compat: Add 32=>64-bit messages translator")
Fixes: 96392ee5a1 ("xfrm/compat: Translate 32-bit user_policy from sockptr")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add mmc0 node for the DWCMSHC SDHCI controller with basic configuration
(disabled by default) and fixed clock definition in bstc1200.dtsi.
Enable mmc0 with board-specific configuration including 8-bit bus
width and reserved SRAM bounce buffer on the CDCU1.0 ADAS 4C2G board.
The bounce buffer in reserved SRAM addresses hardware constraints
where the eMMC controller cannot access main system memory through
SMMU due to a hardware bug, and all DRAM is located outside the
4GB boundary.
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
Acked-by: Gordon Ge <gordon.ge@bst.ai>
Signed-off-by: Gordon Ge <gordon.ge@bst.ai>
The sensor->data_pkt buffer is used exclusively to store incoming
hardware data during the attention handler, where it is entirely
overwritten by either memcpy() or rmi_read_block(). Therefore,
there is no need to zero-initialize it during probe.
Switch to devm_kmalloc() to avoid the unnecessary memset overhead.
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260505045952.1570713-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Change reg_size from unsigned long to u32 to save space and ensure
consistent size across 32-bit and 64-bit architectures, and use
DECLARE_BITMAP() for subpacket_map.
Also pack the structure by rearranging the members to avoid holes,
and use size_add() to prevent potential integer overflows when
calculating the total size of registers.
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260505045952.1570713-13-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently, rmi_create_function() allocates memory for the rmi_function
structure, but rmi_register_function() initializes the device via
device_initialize(). This split of ownership makes error handling in
rmi_create_function() confusing because the caller must be aware that
if rmi_register_function() fails, it has already called put_device() to
clean up the memory.
To make the memory lifecycle explicit and fix potential leaks cleanly
introduce rmi_alloc_function() to handle memory allocation and device
initialization, and make the caller of rmi_register_function()
responsible for cleanup.
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260505045952.1570713-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The presence map is only used during the parsing of the register
descriptor, so we can make it a local variable instead of storing it
in struct rmi_register_descriptor.
Also fix the spelling of the constant and the variable name (presence
instead of presense).
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260505045952.1570713-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
attn_fifo is allocated as part of struct rmi_driver_data using
devm_kzalloc in rmi_driver_probe. However, it is never initialized.
A zero-initialized kfifo has its mask set to 0, which effectively
limits its capacity to 1 element instead of the declared 16.
This can lead to lost attention data and memory leaks of the attention
data payload if multiple attention events are received before the
threaded interrupt handler can process them.
Initialize attn_fifo using INIT_KFIFO after allocating rmi_driver_data.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The number of registers in the RMI4 register descriptor is populated
by counting the bits in the presence map using bitmap_weight(). Since
the presence map can contain up to 256 bits (RMI_REG_DESC_PRESENSE_BITS),
storing this count in a u8 can overflow to 0 if all 256 bits are set.
Change the num_registers field in struct rmi_register_descriptor
from u8 to u16 to prevent potential integer overflow and ensure safe
processing of devices reporting large descriptors.
Fixes: 2b6a321da9 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260505045952.1570713-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When reading the register descriptor, the base address is incremented by
1 to read the presence register block. However, after reading the
presence register block, the address is incorrectly incremented by only
1 byte (++addr) instead of the actual size of the presence block
(size_presence_reg). This causes the subsequent structure block read to
read from the wrong memory location if the presence block is larger than
1 byte.
Fix this by advancing the address by size_presence_reg.
Fixes: 2b6a321da9 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260505045952.1570713-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- fix oops in suspend/shutdown without display (Jani)
- RAS fixes (Raag)
- Use HW_ERR prefix in log (Raag)
- include all registered queues in TLB invalidation (Tangudu)
- Fix refcount leak in xe_range_tree in error paths (Wentao)
- fix job timeout recovery for unstarted jobs and kernel queues (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/aitt8ZkYmxIT9cdP@gsse-cloud1.jf.intel.com
The timeout error path in tegra_se_host1x_submit() returns without
calling host1x_job_put(), while all other paths (success, submit
error, pin error) properly release the job reference through the
job_put label. Since host1x_job_alloc() initializes the reference
count and host1x_job_put() is required to drop it, omitting it on
timeout causes a permanent refcount leak.
Fix this by redirecting the timeout return to the existing job_put
label, ensuring the job reference and any associated syncpt
references are consistently released.
Cc: stable@vger.kernel.org
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the rng module is removed the default RNG will be leaked.
Call crypto_del_default_rng to free it if possible.
Fixes: 7cecadb7cc ("crypto: rng - Do not free default RNG when it becomes unused")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hmac(sha256), hmac(sha384) and cts(cbc(aes)) algorithms have been
marked as FIPS allowed for years. Mark the respective authenc()
constructions per RFC 8009 ("AES Encryption with HMAC-SHA2 for
Kerberos 5") as such as well.
SP 800-57 Part 3 Rev. 1 from Jan 2015 [1] links the draft of what
became RFC 8009 in Oct 2016 as approved in section 6.3 Procurement
Guidance (item/recommendation 3).
[1] https://csrc.nist.gov/pubs/sp/800/57/pt3/r1/final
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The starfive_trng_read() function acquires a runtime PM reference
via pm_runtime_get_sync() but fails to release it on two error
paths. If starfive_trng_wait_idle() or starfive_trng_cmd() returns
an error, the function exits without calling
pm_runtime_put_sync_autosuspend(), leaving the runtime PM usage
counter permanently elevated and preventing the device from entering
runtime suspend.
Refactor the function to use a unified error path that calls
pm_runtime_put_sync_autosuspend() before returning.
Cc: stable@vger.kernel.org
Fixes: c388f458bc ("hwrng: starfive - Add TRNG driver for StarFive SoC")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
atmel_ecdh_init_tfm() always allocates ctx->fallback, so it is never
NULL in atmel_ecdh_max_size(). Remove the dead code and return
crypto_kpp_maxsize() directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg_cleanup error path used list[i] instead of list[j] when unmapping
DMA buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one.
Fixes: c694b23329 ("crypto: cavium - Add the Virtual Function driver for CPT")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg_cleanup path used list[i] instead of list[j] when unmapping DMA
buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one.
Fixes: 10b4f09491 ("crypto: marvell - add the Virtual Function driver for CPT")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the deprecated irq_of_parse_and_map() call with the modern
platform_get_irq() in the probe function. This also improves error
handling: platform_get_irq() returns a negative errno on failure,
whereas irq_of_parse_and_map() returned 0.
Change the irq field in struct crypto4xx_core_device from u32 to int
to match the return type of platform_get_irq().
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove sun4i_ss_rng, as it is insecure and unused:
- It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing
locking and has a buffer overflow. sun4i_ss_prng_generate() fails to
fill the entire buffer with cryptographic random bytes, because it
rounds the destination length down and also doesn't actually wait for
the hardware to be ready before pulling bytes from it.
- No user of this code is known. It's usable only theoretically via the
"rng" algorithm type of AF_ALG. But userspace actually just uses the
actual Linux RNG (/dev/random etc) instead. And rng_algs don't
contribute entropy to the actual Linux RNG either. (This may have
been confused with hwrng, which does contribute entropy.)
The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen
and discovered by Atuin - Automated Vulnerability Discovery Engine
There's no point in fixing all these vulnerabilities individually when
this is unused code, so let's just remove it.
Fixes: b8ae5c7387 ("crypto: sun4i-ss - support the Security System PRNG")
Cc: stable@vger.kernel.org
Reported-by: Tianchu Chen <flynnnchen@tencent.com>
Closes: https://lore.kernel.org/r/af749a8447bd7f0e9dd26ca6c87e9c6afecb09d9@linux.dev/
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since this file just implements a hwrng driver, move it into
drivers/char/hw_random/. Rename the kconfig option accordingly as well.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In aggregation modes (e.g. --per-socket, --per-die, etc.), a counter
might not be scheduled or counted on specific aggregate groups if it was
not assigned to the CPUs belonging to those groups. However, the
printout() check triggers the "print_free_counters_hint" logic
unconditionally for any supported counter with a missing count. This
results in a false "Some events weren't counted. Try disabling the NMI
watchdog" warning.
Furthermore, the NMI watchdog only reserves performance counters on core
PMUs. Uncore PMU events (e.g. CHA, IMC) are not affected by the NMI
watchdog, but their failures also falsely triggered this warning.
This warning was originally introduced in commit 02d492e5dc ("perf
stat: Issue a HW watchdog disable hint")
To fix this, restrict setting of print_free_counters_hint to only
trigger for core PMU events by checking counter->pmu and
counter->pmu->is_core.
Example before/after:
$ perf stat -M lpm_miss_lat --metric-only --per-socket -a -- sleep 1
Before:
Performance counter stats for 'system wide':
ns lpm_miss_lat_rem ns lpm_miss_lat_loc
S0 126 202.3 207.9
S1 126 231.9 259.3
1.006029831 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
After:
Performance counter stats for 'system wide':
ns lpm_miss_lat_rem ns lpm_miss_lat_loc
S0 126 202.3 207.9
S1 126 231.9 259.3
1.006029831 seconds time elapsed
Assisted-by: Gemini:gemini-next
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: Add support for HCI_LE_Set_Host_Feature [v2]
- SMP: Use AES-CMAC library API
- sockets: convert to getsockopt_iter
- Add SPDX id lines to some source files
drivers:
- btintel_pcie: Support Product level reset
- btintel_pcie: Add support for smart trigger dump
- btintel_pcie: Add 50 ms delay before MAC init on BlazarIW
- btintel_pcie: Separate coredump work from RX work
- btmtk: add event filter to filter specific event
- btrtl: fix RTL8761B/BU broken LE extended scan
- btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
- btusb: Add Realtek RTL8922AE VID/PID 0bda/d923
- btusb: MT7922: Add VID/PID 0e8d/223c
- btusb: MT7925: Add VID/PID 0e8d/8c38
- btusb: Add support for TP-Link TL-UB250
- btusb: Add Mercusys MA530 for Realtek RTL8761BUV
- btusb: Add TP-Link UB600 for Realtek 8761BUV
- btusb: Add support for Intel Lizard Peak 2 (0x8087:0x0040)
- btusb: Add USB ID 2c4e:0128 for Mercusys MA60XNB
- btusb: MT7925: Add VID/PID 13d3/3609
* tag 'for-net-next-2026-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (49 commits)
Bluetooth: btintel_pcie: Separate coredump work from RX work
Bluetooth: btmtksdio: fix infinite loop in btmtksdio_txrx_work()
Bluetooth: qca: Add BT FW build version to kernel log
Bluetooth: vhci: validate devcoredump state before side effects
Bluetooth: L2CAP: validate connectionless PSM length
Bluetooth: hci: validate codec capability element length
Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref
Bluetooth: btintel_pcie: Load IOSF debug regs by controller variant
Bluetooth: btintel_pcie: Add 50 ms delay before MAC init on BlazarIW
Bluetooth: Add SPDX id lines to some source files
Bluetooth: btintel_pcie: Add support for smart trigger dump
Bluetooth: hci_h5: reset hci_uart::priv in the close() method
Bluetooth: btusb: clean up probe error handling
Bluetooth: btusb: fix wakeup irq devres lifetime
Bluetooth: btusb: fix wakeup source leak on probe failure
Bluetooth: btusb: fix use-after-free on marvell probe failure
Bluetooth: btusb: fix use-after-free on registration failure
Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path
Bluetooth: hci_core: Fix UAF in hci_unregister_dev()
Bluetooth: hci_event: fix simultaneous discovery stuck in FINDING
...
====================
Link: https://patch.msgid.link/20260611183358.176776-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Heidelberg says:
====================
NFC updates for net-next 20260611
- nxp-nci: Add ISO15693 support
- nxp-nci: treat -ENXIO in IRQ thread as no data available
- nci: uart: Constify struct tty_ldisc_ops
- trf7970a: fix comment typos
- Use named initializers for struct i2c_device_id
- MAINTAINERS: Update address for David Heidelberg
* tag 'nfc-net-next-20260611' of https://codeberg.org/linux-nfc/linux:
MAINTAINERS: Update address for David Heidelberg
nfc: Use named initializers for struct i2c_device_id
nfc: nxp-nci: treat -ENXIO in IRQ thread as no data available
nfc: nxp-nci: Add ISO15693 support
nfc: nci: uart: Constify struct tty_ldisc_ops
nfc: trf7970a: fix comment typos
====================
Link: https://patch.msgid.link/1aed7555-3d24-413c-b284-bc85fdd33055@ixit.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document the Inter-Processor Communication Controller on the Qualcomm
Maili Platform, which will be used to route interrupts across various
subsystems found on the SoC.
Signed-off-by: Chunkai Deng <chunkai.deng@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Michael Bommarito says:
====================
tipc: fix netlink gate and receive-path bugs
This is v4 of the public TIPC series. The only change from v3 is in
patch 1: TIPC_NL_MEDIA_SET now uses GENL_UNS_ADMIN_PERM like the other
mutators, instead of GENL_ADMIN_PERM, so the whole series uses the
namespace-aware CAP_NET_ADMIN check that matches the legacy TIPC netlink
path. Patches 2 and 3 are unchanged.
Patch 1 gives the TIPCv2 mutating generic-netlink operations the admin
gate the legacy API already has, so a local unprivileged process can no
longer change TIPC state. Patch 2 drops CONN_ACK messages that
acknowledge more outstanding sends than exist, preventing the
snt_unacked underflow. Patch 3 rejects peer bindings with lower > upper,
which would otherwise leak binding-table memory.
====================
Link: https://patch.msgid.link/20260610124003.3831170-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc_update_nametbl() inserts a binding advertised by a peer node using
the lower and upper service-range bounds taken directly from the wire,
without checking that lower <= upper. The local bind path validates the
ordering (tipc_uaddr_valid()), but the name-distribution path does not.
A binding with lower > upper is inserted at the far end of the
service-range rbtree (keyed on lower) where no lookup or withdrawal can
ever match it (service_range_foreach_match() requires sr->lower <= end).
The publication, its service_range node and the augmented rbtree entry
are then leaked for the lifetime of the namespace, and there is no
per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings.
Reject inverted ranges in the network path as well. A peer node can
otherwise leak unbounded binding-table memory by sending PUBLICATION
items with lower > upper.
Fixes: 37922ea4a3 ("tipc: permit overlapping service ranges in name table")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260610124003.3831170-4-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count
from the unsigned 16-bit send counter snt_unacked without checking that it
does not exceed the number of messages actually outstanding:
tsk->snt_unacked -= msg_conn_ack(hdr);
msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK
message. If the ack count is larger than snt_unacked, the subtraction
wraps to a near-maximum value, leaving tsk_conn_cong() permanently true
and starving the connection of further transmits.
Validate the ACK count at the start of the CONN_ACK block and drop the
message if it acknowledges more messages than are outstanding. A peer (or,
for a local connection, the connected peer socket) can otherwise wedge a
TIPC connection's send side by sending an oversized connection ack.
Fixes: 10724cc7bb ("tipc: redesign connection-level flow control")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260610124003.3831170-3-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TIPCv2 registers mutating generic-netlink operations without admin
permission flags. Generic netlink only checks CAP_NET_ADMIN when an
operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local
unprivileged process can currently change TIPC state through commands
such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and
bearer enable/disable.
The legacy TIPC netlink API already checks netlink_net_capable(...,
CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators
the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which
maps to the same namespace-aware CAP_NET_ADMIN check that
netlink_net_capable() performs, so the behaviour matches the legacy
path and keeps working for CAP_NET_ADMIN holders in a non-initial user
namespace (containers).
A QEMU/KASAN repro run as uid/gid 65534 with zero effective
capabilities previously succeeded in changing the network id and node
identity, setting and flushing key material, and enabling/disabling a
UDP bearer. With this patch applied the same operations fail with
-EPERM.
Fixes: 0655f6a863 ("tipc: add bearer disable/enable to new netlink api")
Link: https://lore.kernel.org/all/20260604163102.2658553-1-dominik.czarnota@trailofbits.com/
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260610124003.3831170-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sanman Pradhan
Albert Yang
Dmitry Torokhov
Dave Airlie
Eric Dumazet
Wentao Liang
Herbert Xu
Ilya Dryomov
Thorsten Blum
Felix Gu
Bartosz Golaszewski
Rosen Penev
Eric Biggers
Dave Jiang
Chun-Tse Shao
James Clark
Jakub Kicinski
Chunkai Deng
Jens Axboe
Michael Bommarito