After a successful auxiliary_device_init(), aux_dev->dev.release
(xe_nvm_release_dev()) is responsible for the kfree(nvm). When
there is failure with auxiliary_device_add(), driver will call
auxiliary_device_uninit(), which call put_device(). So that the
.release callback will be triggered to free the memory associated
with the auxiliary_device.
Move the kfree(nvm) into the auxiliary_device_init() failure path
and remove the err goto path to fix below error.
"
[ 13.232905] ==================================================================
[ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe]
[ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273
[ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary)
...
[ 13.233125] Call Trace:
[ 13.233126] <TASK>
[ 13.233127] dump_stack_lvl+0x7f/0xc0
[ 13.233132] print_report+0xce/0x610
[ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0
[ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe]
...
"
v2: drop err goto path. (Alexander)
Fixes: 7926ba2143 ("drm/xe: defer free of NVM auxiliary container to device release callback")
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Brian Nguyen <brian3.nguyen@intel.com>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suggested-by: Brian Nguyen <brian3.nguyen@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260120183239.2966782-7-shuicheng.lin@intel.com
(cherry picked from commit a3187c0c2b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
For parallel exec queues, xe_exec_ioctl() copied the batch buffer address
array from userspace without checking num_batch_buffer.
If user creates a sync-only exec that doesn't use the address field, the
exec will fail with -EFAULT.
Add num_batch_buffer check to skip the copy, and the exec could be executed
successfully.
Here is the sync-only exec:
struct drm_xe_exec exec = {
.extensions = 0,
.exec_queue_id = qid,
.num_syncs = 1,
.syncs = (uintptr_t)&sync,
.address = 0, /* ignored for sync-only */
.num_batch_buffer = 0, /* sync-only */
};
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260122214053.3189366-2-shuicheng.lin@intel.com
(cherry picked from commit 4761791c1e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Pull SCSI fixes from James Bottomley:
"Only one core change, the rest are drivers.
The core change reorders some state operations in the error handler to
try to prevent missed wake ups of the error handler (which can halt
error processing and effectively freeze the entire system)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
scsi: core: Wake up the error handler when final completions race against each other
scsi: storvsc: Process unsupported MODE_SENSE_10
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
Pull keys fix from Jarkko Sakkinen.
* tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes for 6.19-rc7 that resolve
some reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues"
* tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Fix not set tty->port race condition
serial: 8250_pci: Fix broken RS485 for F81504/508/512
serial: qcom_geni: Fix BT failure regression on RB2 platform
Pull i2c fix from Wolfram Sang:
- k1: drop wrong IRQF_ONESHOT from IRQ request to fix genirq warning
* tag 'i2c-for-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: spacemit: drop IRQF_ONESHOT flag from IRQ request
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
References:
[1] trustedcomputinggroup.org/wp-content/uploads/
Trusted-Platform-Module-2.0-Library-Part-3-Version-184_pub.pdf
Fixes: 6e9722e9a7 ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
Pull NTB fix from Jon Mason:
"Bug fix for uninitialized mutex in ntb transport"
* tag 'ntb-6.19-bugfixes' of https://github.com/jonmason/ntb:
ntb: transport: Fix uninitialized mutex
Pull tracing fixes from Steven Rostedt:
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single
event that can display fields from both events as well as the time
delta that took place between the events. It can also pass a
stacktrace from the first event so that it can be displayed by the
synthetic event (this is useful to get a stacktrace of a task
scheduling out when blocked and recording the time it was blocked
for).
A synthetic event can also connect an existing synthetic event to
another event. An issue was found that if the first synthetic event
had a stacktrace as one of its fields, and that stacktrace field was
passed to the new synthetic event to be displayed, it would crash the
kernel. This was due to the stacktrace not being saved as a
stacktrace but was still marked as one. When the stacktrace was read,
it would try to read an array but instead read the integer metadata
of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stacktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses
are greater than 2GB apart it could lead to truncation and cause a
bad search result. Use normal compares instead of a subtraction
between addresses to calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two
different types that hold the argument array. The macro
FGRAPH_ENTRY_ARGS() is used to find the correct arguments from the
given type. One location was missed and still referenced the
arguments directly via entry->args and could produce the wrong value
depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
* tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/tracepoint-update: Fix memory leak in add_string() on failure
function_graph: Fix args pointer mismatch in print_graph_retval()
tracing: Avoid possible signed 64-bit truncation
tracing: Fix crash on synthetic stacktrace field usage
Pull driver core fixes from Danilo Krummrich:
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks
* tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: driver: drop device private data post unbind
rust: driver: add DriverData type to the DriverLayout trait
rust: driver: add DEVICE_DRIVER_OFFSET to the DriverLayout trait
rust: driver: introduce a DriverLayout trait
rust: auxiliary: add Driver::unbind() callback
rust: i2c: do not drop device private data on shutdown()
rust: irq: always inline functions using build_assert with arguments
rust: io: always inline functions using build_assert with arguments
Pull timer fixes from Ingo Molnar:
- Fix auxiliary timekeeper update & locking bug
- Reduce the sensitivity of the clocksource watchdog,
to fix false positive measurements that marked the
TSC clocksource unstable
* tag 'timers-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Reduce watchdog readout delay limit to prevent false positives
timekeeping: Adjust the leap state for the correct auxiliary timekeeper
Pull scheduler fixes from Ingo Molnar:
- Fix PELT clock synchronization bug when entering idle
- Disable the NEXT_BUDDY feature, as during extensive testing
Mel found that the negatives outweigh the positives
- Make wakeup preemption less aggressive, which resulted in
an unreasonable increase in preemption frequency
* tag 'sched-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Revert force wakeup preemption
sched/fair: Disable scheduler feature NEXT_BUDDY
sched/fair: Fix pelt clock sync when entering idle
Pull perf events fixes from Ingo Molnar:
- Fix mmap_count warning & bug when creating a group member event
with the PERF_FLAG_FD_OUTPUT flag
- Disable the sample period == 1 branch events BTS optimization
on guests, because BTS is not virtualized
* tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Do not enable BTS for guests
perf: Fix refcount warning on event->mmap_count increment
Pull irq fixes from Ingo Molnar:
- Fix spurious interrupts during resume in the renesas-rzv2h driver
- Fix a 32+ bit physical memory truncation bug in the gic-v3-its driver
* tag 'irq-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Avoid truncating memory addresses
irqchip/renesas-rzv2h: Prevent TINT spurious interrupt during resume
Pull arm64 kvm fixes from Paolo Bonzini:
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Invert KVM_PGTABLE_WALK_HANDLE_FAULT to fix pKVM walkers
KVM: arm64: Don't blindly set set PSTATE.PAN on guest exit
KVM: arm64: nv: Respect stage-2 write permssion when setting stage-1 AF
KVM: arm64: Remove unused vcpu_{clear,set}_wfx_traps()
KVM: arm64: Remove unused parameter in synchronize_vcpu_pstate()
KVM: arm64: Remove extra argument for __pvkm_host_{share,unshare}_hyp()
KVM: arm64: Inject UNDEF for a register trap without accessor
KVM: arm64: Copy FGT traps to unprotected pKVM VCPU on VCPU load
KVM: arm64: Fix EL2 S1 XN handling for hVHE setups
KVM: arm64: gic: Check for vGICv3 when clearing TWI
KVM/arm64 fixes for 6.19
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
The hw clock gating register sequence consists of register value pairs
that are written to the GPU during initialisation.
The a690 hwcg sequence has two GMU registers in it that used to amount
to random writes in the GPU mapping, but since commit 188db3d7fe
("drm/msm/a6xx: Rebase GMU register offsets") they trigger a fault as
the updated offsets now lie outside the mapping. This in turn breaks
boot of machines like the Lenovo ThinkPad X13s.
Note that the updates of these GMU registers is already taken care of
properly since commit 40c297eb24 ("drm/msm/a6xx: Set GMU CGC
properties on a6xx too"), but for some reason these two entries were
left in the table.
Fixes: 5e7665b5e4 ("drm/msm/adreno: Add Adreno A690 support")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Fixes: 188db3d7fe ("drm/msm/a6xx: Rebase GMU register offsets")
Patchwork: https://patchwork.freedesktop.org/patch/695778/
Message-ID: <20251221164552.19990-1-johan@kernel.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
(cherry picked from commit dcbd2f8280)
Pull kbuild fixes from Nicolas Schier:
- Reduce possible complications when cross-compiling by increasing use
of ${NM} in check-function-names.sh
- Fix static linking of nconf
* tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig: fix static linking of nconf
kbuild: prefer ${NM} in check-function-names.sh
Pull s390 fixes from Heiko Carstens:
- Add $(DISABLE_KSTACK_ERASE) to vdso compile flags to fix compile
errors with old gcc versions
- Fix path to s390 chacha implementation in vdso selftests, after
vdso64 has been renamed to vdso
- Fix off-by-one bug in APQN limit calculation
- Discard .modinfo section from decompressor image to fix SecureBoot
* tag 's390-6.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot/vmlinux.lds.S: Ensure bzImage ends with SecureBoot trailer
s390/ap: Fix wrong APQN fill calculation
selftests: vDSO: getrandom: Fix path to s390 chacha implementation
s390/vdso: Disable kstack erase
Pull arm64 fixes from Catalin Marinas:
- A set of fixes for FPSIMD/SVE/SME state management (around signal
handling and ptrace) where a task can be placed in an invalid state
- __nocfi added to swsusp_arch_resume() to avoid a data abort on
resuming from hibernate
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Set __nocfi on swsusp_arch_resume()
arm64/fpsimd: signal: Fix restoration of SVE context
arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA
arm64/fpsimd: ptrace: Fix SVE writes on !SME systems
Pull smb server fixes from Steve French:
- Use the original nents value for ib_dma_unmap_sg(), preventing
potential memory corruption in the RDMA transport layer
- Fix a naming discrepancy in the kernel-doc for
ksmbd_vfs_kern_path_start_removing() as identified by sparse static
analysis
- Reset smb_direct_port to its default value during initialization to
ensure the correct port is used when switching between different RDMA
device types without module reload
* tag 'v6.19-rc6-server-fixes' of git://git.samba.org/ksmbd:
smb: server: reset smb_direct_port = SMB_DIRECT_PORT_INFINIBAND on init
smb: server: fix comment for ksmbd_vfs_kern_path_start_removing()
ksmbd: smbd: fix dma_unmap_sg() nents
Pull PCI fixes from Bjorn Helgaas:
- Fix the pci_do_resource_release_and_resize() failure path, which
clobbered the intended failure return value (Ilpo Järvinen)
- Restore resizable BAR size before value because the size determines
which bits are writable; this fixes i915 and xe regressions (Ilpo
Järvinen)
* tag 'pci-v6.19-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix Resizable BAR restore order
PCI: Fix BAR resize rollback path overwriting ret
Pull x86 platform driver fixes from Ilpo Järvinen:
- acer-wmi:
- Extend support for Acer Nitro AN515-58
- Fix missing capability check
- amd/wbrf: Fix memory leak in wbrf_record()
- asus-armoury:
- Fix GA403U* matching
- Fix FA608UM TDP data
- Add many models
- asus-wmi: Move OOBE presence check outside deprecation ifdef
- hp-bioscfg:
- Fix kernel panic in GET_INSTANCE_ID macro
- Fix kobject warnings for empty attribute names
- Correct GUID to uppercase (lowercase letter prevented autoloading
the module)
- mellanox: Fix SN5640/SN5610 LED platform data
- docs:
- alienware-wmi: Typo fix
- amd_hsmp: Fix document link
* tag 'platform-drivers-x86-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: acer-wmi: Fix missing capability check
platform/x86: acer-wmi: Extend support for Acer Nitro AN515-58
platform/x86: asus-armoury: add support for GA403WW
platform/x86: asus-armoury: keep the list ordered alphabetically
platform/x86: asus-armoury: add support for G835L
platform/x86: asus-armoury: fix ppt data for FA608UM
platform/x86: hp-bioscfg: Fix automatic module loading
platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro
platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names
platform/x86: asus-wmi: fix sending OOBE at probe
platform/x86: asus-armoury: add support for FA617XT
platform/x86: asus-armoury: add support for FA401UV
platform/x86: asus-armoury: add support for GV302XV
platform/x86: asus-armoury: Add power limits for Asus G513QY
platform/x86/amd: Fix memory leak in wbrf_record()
platform/mellanox: Fix SN5640/SN5610 LED platform data
docs: fix PPR for AMD EPYC broken link
docs: alienware-wmi: fix typo
platform/x86: asus-armoury: add support for GA403UV
asus-armoury: fix ppt data for GA403U* renaming to GA403UI
...
Pull pmdomain fixes from Ulf Hansson:
- imx: Remove incorrect reset/clock mask for 8mq vpu
- rockchip: Fix initial state of PM domain
* tag 'pmdomain-v6.19-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain:rockchip: Fix init genpd as GENPD_STATE_ON before regulator ready
pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu
Pull MMC fixes from Ulf Hansson:
- rtsx_pci_sdmmc: Fix signal voltage switch
- sdhci-of-dwcmshc:
- A couple of fixes for Eswin EIC7700
- Fix support for HS200/HS400 mode
* tag 'mmc-v6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-dwcmshc: Fix DMA 128MB boundary for Eswin EIC7700
mmc: sdhci-of-dwcmshc: Fix init for AXI clock for Eswin EIC7700
mmc: rtsx_pci_sdmmc: implement sdmmc_card_busy function
mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode
Pull block fixes from Jens Axboe:
- A set of selftest fixes for ublk
- Fix for a pid mismatch in ublk, comparing PIDs in different
namespaces if run inside a namespace
- Fix for a regression added in this release with polling, where the
nvme tcp connect code would spin forever
- Zoned device error path fix
- Tweak the blkzoned uapi additions from this kernel release, making
them more easily discoverable
- Fix for a regression in bcache with bio endio handling added in this
release
* tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
bcache: use bio cloning for detached device requests
blk-mq: use BLK_POLL_ONESHOT for synchronous poll completion
selftests/ublk: fix garbage output in foreground mode
selftests/ublk: fix error handling for starting device
selftests/ublk: fix IO thread idle check
block: make the new blkzoned UAPI constants discoverable
ublk: fix ublksrv pid handling for pid namespaces
block: Fix an error path in disk_update_zone_resources()
Pull io_uring fixes from Jens Axboe:
- Fix for a potential leak of an iovec, if a specific cleanup path is
used and the rw_cache is full at the time of the call
- Fix for a regression added in this cycle, where waitid should be
using prober release/acquire semantics for updating the wait queue
head
- Check for the cancelation bit being set for every work item processed
by io-wq, not just at the start of the loop. Has no real practical
implications other than to shut up syzbot doing crazy things that
grossly overload a system, hence slowing down ring exit
- A few selftest additions, updating the mini_liburing that selftests
use
* tag 'io_uring-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
selftests/io_uring: support NO_SQARRAY in miniliburing
selftests/io_uring: add io_uring_queue_init_params
io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop
io_uring/waitid: fix KCSAN warning on io_waitid->head
io_uring/rw: free potentially allocated iovec on cache put failure
Pull iommu fixes from Joerg Roedel:
- AMD IOMMU: Fix potential NULL-ptr dereference in error path
of amd_iommu_probe_device()
- Generic IOMMUPT: Fix another compiler issue seen with older
compiler versions
- Fix signedness issue in ARM IO-PageTable code
* tag 'iommu-fixes-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/io-pgtable-arm: fix size_t signedness bug in unmap path
iommupt: Make it clearer to the compiler that pts.level == 0 for single page
iommu/amd: Fix error path in amd_iommu_probe_device()
When realloc() fails in add_string(), the function returns -1 but leaves
*vals pointing to the previously allocated memory. This can cause memory
leaks in callers like make_trace_array() that return on error without
freeing the partially built array.
Fix this by freeing *vals and setting it to NULL when realloc() fails.
This makes the error handling self-contained in add_string() so callers
don't need to handle cleanup on failure.
This bug is found by my static analysis tool and my code review.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: e30f8e61e2 ("tracing: Add a tracepoint verification check at build time")
Link: https://patch.msgid.link/20260119114542.1714405-1-geoffreyhe2@gmail.com
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When funcgraph-args and funcgraph-retaddr are both enabled, many kernel
functions display invalid parameters in trace logs.
The issue occurs because print_graph_retval() passes a mismatched args
pointer to print_function_args(). Fix this by retrieving the correct
args pointer using the FGRAPH_ENTRY_ARGS() macro.
Link: https://patch.msgid.link/20260112021601.1300479-1-dolinux.peng@gmail.com
Fixes: f83ac7544f ("function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When creating a synthetic event based on an existing synthetic event that
had a stacktrace field and the new synthetic event used that field a
kernel crash occurred:
~# cd /sys/kernel/tracing
~# echo 's:stack unsigned long stack[];' > dynamic_events
~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger
~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger
The above creates a synthetic event that takes a stacktrace when a task
schedules out in a non-running state and passes that stacktrace to the
sched_switch event when that task schedules back in. It triggers the
"stack" synthetic event that has a stacktrace as its field (called "stack").
~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events
~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger
~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger
The above makes another synthetic event called "syscall_stack" that
attaches the first synthetic event (stack) to the sys_exit trace event and
records the stacktrace from the stack event with the id of the system call
that is exiting.
When enabling this event (or using it in a historgram):
~# echo 1 > events/synthetic/syscall_stack/enable
Produces a kernel crash!
BUG: unable to handle page fault for address: 0000000000400010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:trace_event_raw_event_synth+0x90/0x380
Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f
RSP: 0018:ffffd2670388f958 EFLAGS: 00010202
RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0
RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50
R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010
R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90
FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __tracing_map_insert+0x208/0x3a0
action_trace+0x67/0x70
event_hist_trigger+0x633/0x6d0
event_triggers_call+0x82/0x130
trace_event_buffer_commit+0x19d/0x250
trace_event_raw_event_sys_exit+0x62/0xb0
syscall_exit_work+0x9d/0x140
do_syscall_64+0x20a/0x2f0
? trace_event_raw_event_sched_switch+0x12b/0x170
? save_fpregs_to_fpstate+0x3e/0x90
? _raw_spin_unlock+0xe/0x30
? finish_task_switch.isra.0+0x97/0x2c0
? __rseq_handle_notify_resume+0xad/0x4c0
? __schedule+0x4b8/0xd00
? restore_fpregs_from_fpstate+0x3c/0x90
? switch_fpu_return+0x5b/0xe0
? do_syscall_64+0x1ef/0x2f0
? do_fault+0x2e9/0x540
? __handle_mm_fault+0x7d1/0xf70
? count_memcg_events+0x167/0x1d0
? handle_mm_fault+0x1d7/0x2e0
? do_user_addr_fault+0x2c3/0x7f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reason is that the stacktrace field is not labeled as such, and is
treated as a normal field and not as a dynamic event that it is.
In trace_event_raw_event_synth() the event is field is still treated as a
dynamic array, but the retrieval of the data is considered a normal field,
and the reference is just the meta data:
// Meta data is retrieved instead of a dynamic array
str_val = (char *)(long)var_ref_vals[val_idx];
// Then when it tries to process it:
len = *((unsigned long *)str_val) + 1;
It triggers a kernel page fault.
To fix this, first when defining the fields of the first synthetic event,
set the filter type to FILTER_STACKTRACE. This is used later by the second
synthetic event to know that this field is a stacktrace. When creating
the field of the new synthetic event, have it use this FILTER_STACKTRACE
to know to create a stacktrace field to copy the stacktrace into.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260122194824.6905a38e@gandalf.local.home
Fixes: 00cf3d672a ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull spi fixes from Mark Brown:
"One new device ID, plus a few fixes.
The most substantial of the fixes is for the Cadence driver which in
at least some instantiations requires transmit data to drive data
through the IP"
* tag 'spi-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel-pci: Add support for Nova Lake SPI serial flash
spi: spi-cadence: enable SPI_CONTROLLER_MUST_TX
spi: hisi-kunpeng: Fixed the wrong debugfs node name in hisi_spi debugfs initialization
spi: spi-sprd-adi: Fix double free in probe error path
Pull regulator fix from Mark Brown:
"A trivial fix adding a missing memory allocation check"
* tag 'regulator-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fp9931: Add missing memory allocation check
Pull regmap fixes from Mark Brown:
"A couple of small fixes, one error handling one and another for misuse
of the hwspinlock API"
* tag 'regmap-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix race condition in hwspinlock irqsave routine
regmap: maple: free entry on mas_store_gfp() failure
Dave Airlie
Shuicheng Lin
Nitin Gote
Tvrtko Ursulin
Linus Torvalds
Srish Srinivasan
gongqi
feng
Dan Williams
Wolfram Sang
Paolo Bonzini
Johan Hovold
Weigang He
Donglin Peng
Ian Rogers
Steven Rostedt