Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
This patchset has 4 fixes and some enhancements to the Elite DSP driver
support.
Fixes includes
- setting correct flags for expected behaviour of appl_ptr
- fix closing of copp instances
- fix buffer alignment.
- fix state checks before closing asm stream
Enhancements include:
- adding q6asm_get_hw_pointer and ack callback support
- simplify code via __free(kfree) mechanism.
- use spinlock guards
- few cleanups discovered during doing above 2.
There is another set of updates comming soon, which will add support
for early memory mapping and few more modules support in audioreach.
For record path, multiple read requests are queued to dsp in advance.
However when data stream is closed, the pending read requests are rejected
by the dsp and a response is sent to the driver, this case is not handled
in the driver resulting in errors like below
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
This is same for both write and eos.
Fix this by allowing ASM_DATA_CMD_READ_V2, ASM_DATA_CMD_EOS and
ASM_DATA_CMD_WRITE_V2 as expected response.
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A matching Common object post processing instance is normally resused
across multiple streams. However currently we close this on DSP
even though there is a refcount on this copp object, this can result in
below error.
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
Fix this by addressing moving the adm_close to copp_kref destructor
callback.
Fixes: 7b20b2be51 ("ASoC: qdsp6: q6adm: Add q6adm driver")
Cc: Stable@vger.kernel.org
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two virtual multiplexers are now part of the alsa routing.
The "DMIC M1 Mux" now sits between the primary digital mics
"DMICL"/"DMICR" and the virtual multiplexer "DMIC Mux". And
"DMIC M2 Mux" sits between the secondary digital mics
"DMIC2L"/"DMIC2R" and the audio out interfaces
"AIFOUT2L"/"AIFOUT2R". This patch makes sure that the M1 and
M2 mics can be switched On/Off independently, by default both
will be enabled.
Signed-off-by: Sharique Mohammad <sharq0406@gmail.com>
Link: https://patch.msgid.link/20251103091648.771947-1-sharq0406@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct fsl_spdif_soc_data' and 'struct snd_kcontrol_new' are not modified
in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
53548 25576 128 79252 13594 sound/soc/fsl/fsl_spdif.o
After:
=====
text data bss dec hex filename
54828 24296 128 79252 13594 sound/soc/fsl/fsl_spdif.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/5fe08f028395a6c6f50d11eee8fdb4a90b1f68ab.1762151503.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The two digital mics M1(primary digital mic) and M2(secondary digital
mic) work independently of one another. It means they could be switched
On or Off independently of one another. To control their On or Off
state, with this patch creating two virtual multiplexer widgets
"DMIC M1 Mux" and "DMIC M2 Mux", with two options "Enable" and "Disable".
Signed-off-by: Sharique Mohammad <sharq0406@gmail.com>
Link: https://patch.msgid.link/20251103091447.771793-1-sharq0406@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull spi fix from Mark Brown:
"One new device ID for an Intel SoC"
* tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel: Add support for Oak Stream SPI serial flash
Pull regulator fix from Mark Brown:
"A simple fix for a missed part of an API conversion in the bd718x7
driver"
* tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bd718x7: Fix voltages scaled by resistor divider
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
Pull misc x86 fixes from Ingo Molnar:
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants
* tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
x86/cpu: Add/fix core comments for {Panther,Nova} Lake
x86/CPU/AMD: Extend Zen6 model range
x86/build: Disable SSE4a
x86/fpu: Ensure XFD state on signal delivery
x86/CPU/AMD: Add RDSEED fix for Zen5
x86/microcode/AMD: Limit Entrysign signature checking to known generations
Pull perf event fixes from Ingo Molnar:
"Miscellaneous fixes and CPU model updates:
- Fix an out-of-bounds access on non-hybrid platforms in the Intel
PMU DS code, reported by KASAN
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version"
* tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake
perf/x86/intel: Add PMU support for WildcatLake
perf/x86/intel: Fix KASAN global-out-of-bounds warning
Pull objtool fix from Ingo Molnar:
"Fix objtool warning when faced with raw STAC/CLAC instructions"
* tag 'objtool-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix skip_alt_group() for non-alternative STAC/CLAC
Pull xfs fixes from Carlos Maiolino:
"Just a single bug fix (and documentation for the issue)"
* tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document another racy GC case in xfs_zoned_map_extent
xfs: prevent gc from picking the same zone twice
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Fix bug where make menuconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
When building with CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y, there is a series
of errors from the various versions of clear_page() not having __kcfi_typeid_
symbols.
$ cat kernel/configs/repro.config
CONFIG_CFI=y
# CONFIG_LTO_NONE is not set
CONFIG_LTO_CLANG_FULL=y
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean defconfig repro.config bzImage
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_rep
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_rep)
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_orig
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_orig)
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_erms
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_erms)
With full LTO, it is possible for LLVM to realize that these functions never
have their address taken (as they are only used within an alternative, which
will make them a direct call) across the whole kernel and either drop or skip
generating their kCFI type identification symbols.
clear_page_{rep,orig,erms}() are defined in clear_page_64.S with
SYM_TYPED_FUNC_START as a result of
2981557cb0 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI"),
as exported functions are free to be called indirectly thus need kCFI type
identifiers.
Use KCFI_REFERENCE with these clear_page() functions to force LLVM to see
these functions as address-taken and generate then keep the kCFI type
identifiers.
Fixes: 2981557cb0 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI")
Closes: https://github.com/ClangBuiltLinux/linux/issues/2128
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patch.msgid.link/20251013-x86-fix-clear_page-cfi-full-lto-errors-v1-1-d69534c0be61@kernel.org
Pull drm fixes from Simona Vetter:
"Looks like stochastics conspired to make this one a bit bigger, but
nothing scary at all. Also first examples of the new Link: tags, yay!
Next week Dave should be back.
Drivers:
- mediatek: uaf in unbind, fixes -rc2 boot regression
- radeon: devm conversion fixes
- amdgpu: VPE idle handler, re-enable DM idle optimization, DCN3,
SMU, vblank, HDP eDP, powerplay fixes for fiji/iceland
- msm: bunch of gem error path fixes, gmu fw parsing fix, dpu fixes
- intel: fix dmc/dc6 asserts on ADL-S
- xe: fix xe_validation_guard(), wake device handling around gt reset
- ast: fix display output on AST2300
- etnaviv: fix gpu flush
- imx: fix parallel bridge handling
- nouveau: scheduler locking fix
- panel: fixes for kingdisplay-kd097d04 and sitronix-st7789v
Core Changes:
- CI: disable broken sanity job
- sysfb: fix NULL pointer access
- sched: fix SIGKILL handling, locking for race condition
- dma_fence: better timeline name for signalled fences"
* tag 'drm-fixes-2025-10-31' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/ast: Clear preserved bits from register output value
drm/imx: parallel-display: add the bridge before attaching it
drm/imx: parallel-display: convert to devm_drm_bridge_alloc() API
drm/panel: kingdisplay-kd097d04: Disable EoTp
drm/panel: sitronix-st7789v: fix sync flags for t28cp45tn89
drm/xe: Do not wake device during a GT reset
drm/xe: Fix uninitialized return value from xe_validation_guard()
drm/msm/dpu: Fix adjusted mode clock check for 3d merge
drm/msm/dpu: Disable broken YUV on QSEED2 hardware
drm/msm/dpu: Require linear modifier for writeback framebuffers
drm/msm/dpu: Fix pixel extension sub-sampling
drm/msm/dpu: Disable scaling for unsupported scaler types
drm/msm/dpu: Propagate error from dpu_assign_plane_resources
drm/msm/dpu: Fix allocation of RGB SSPPs without scaling
drm/msm: dsi: fix PLL init in bonded mode
drm/i915/dmc: Clear HRR EVT_CTL/HTP to zero on ADL-S
drm/amd/display: Fix incorrect return of vblank enable on unconfigured crtc
drm/amd/display: Add HDR workaround for a specific eDP
drm/amdgpu: fix SPDX header on cyan_skillfish_reg_init.c
drm/amdgpu: fix SPDX header on irqsrcs_vcn_5_0.h
...
Pull pci fixes from Bjorn Helgaas:
- Restore custom qcom ASPM enablement code so L1 PM Substates are
enabled as they were in v6.17 even though the PCI core now enables
just L0s and L1 by default (Bjorn Helgaas)
- Size prefetchable bridge windows only when they actually exist, to
avoid a WARN_ON() regression (Ilpo Järvinen)
* tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Do not size non-existing prefetchable window
Revert "PCI: qcom: Remove custom ASPM enablement code"
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
pbus_size_mem() should only be called for bridge windows that exist but
__pci_bus_size_bridges() may point 'pref' to a resource that does not exist
(has zero flags) in case of non-root buses.
When prefetchable bridge window does not exist, the same non-prefetchable
bridge window is sized more than once which may result in duplicating
entries into the realloc_head list. Duplicated entries are shown in this
log and trigger a WARN_ON() because realloc_head had residual entries after
the resource assignment algorithm:
pci 0000:00:03.0: [11ab:6820] type 01 class 0x060400 PCIe Root Port
pci 0000:00:03.0: PCI bridge to [bus 00]
pci 0000:00:03.0: bridge window [io 0x0000-0x0fff]
pci 0000:00:03.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:03.0: bridge window [mem 0x00200000-0x003fffff] to [bus 02] add_size 200000 add_align 200000
pci 0000:00:03.0: bridge window [mem 0x00200000-0x003fffff] to [bus 02] add_size 200000 add_align 200000
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe03fffff]: assigned
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe03fffff]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/pci/setup-bus.c:2373 pci_assign_unassigned_root_bus_resources+0x1bc/0x234
Check resource flags of 'pref' and only size the prefetchable window if the
resource has the IORESOURCE_PREFETCH flag.
Fixes: ae88d0b9c5 ("PCI: Use pbus_select_window_for_type() during mem window sizing")
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Closes: https://lore.kernel.org/r/51e8cf1c62b8318882257d6b5a9de7fdaaecc343.camel@gmail.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Link: https://patch.msgid.link/20251027132423.8841-1-ilpo.jarvinen@linux.intel.com
Shuming Fan
Peter Ujfalusi
Mark Brown
Srinivas Kandagatla
Ranganath V N
Baojun Xu
HariKrishna Sagala
Dan Carpenter
Sharique Mohammad
Christophe JAILLET
Linus Torvalds
Josh Poimboeuf
Jakub Horký
Nathan Chancellor
Ilpo Järvinen