xHCI hardware maintains its endpoint state between add_endpoint()
and drop_endpoint() calls followed by successful check_bandwidth().
So does the driver.
Core may call endpoint_disable() during xHCI endpoint life, so don't
clear host_ep->hcpriv then, because this breaks endpoint_reset().
If a driver calls usb_set_interface(), submits URBs which make host
sequence state non-zero and calls usb_clear_halt(), the device clears
its sequence state but xhci_endpoint_reset() bails out. The next URB
malfunctions: USB2 loses one packet, USB3 gets Transaction Error or
may not complete at all on some (buggy?) HCs from ASMedia and AMD.
This is triggered by uvcvideo on bulk video devices.
The code was copied from ehci_endpoint_disable() but it isn't needed
here - hcpriv should only be NULL on emulated root hub endpoints.
It might prevent resetting and inadvertently enabling a disabled and
dropped endpoint, but core shouldn't try to reset dropped endpoints.
Document xhci requirements regarding hcpriv. They are currently met.
Fixes: 18b74067ac ("xhci: Fix use-after-free regression in xhci clear hub TT implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A previous patch renamed the temporary variable holding the value read
from the PORTSC register from 'temp' to 'portsc'. This patch follows up
by updating the parameter names of all helper functions called from
xhci_hub_control() that receive a PORTSC value, as well as the functions
they call.
Function changed:
xhci_get_port_status()
L xhci_get_usb3_port_status()
L xhci_hub_report_usb3_link_state()
L xhci_del_comp_mod_timer()
xhci_get_ext_port_status()
xhci_port_state_to_neutral()
xhci_clear_port_change_bit()
xhci_port_speed()
The reason for the rename is to differentiate between port
status/change bit to be written to PORTSC and replying to hub-class
USB requests. Each of them use their specific macros.
Use "portsc" name for PORTSC values and "status" for values intended
for replying to hub-class USB request.
A dedicated structure for USB hub port status responses
('struct usb_port_status' from ch11.h) exists and will be integrated in
a later patch.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-21-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code handling U1/U2 timeout updates reads and modifies the PORTPMSC
register using the generic 'temp' variable, which is also used for
PORTSC. This makes the code hard to read and increases the risk of mixing
up register contents.
Introduce a dedicated 'portpmsc' variable for PORTPMSC accesses and use
it in both U1 and U2 timeout handlers. This makes the intent clearer and
keeps register operations logically separated.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xhci driver uses two different sources for Port Link State (PLS):
1. The PLS field in the PORTSC register (bits 8:5).
2. The PLS value encoded in bits 15:8 of the USB request wIndex,
received by xhci_hub_control().
While both represent similar link states, they differ in a few details,
for example, xHCI's Resume State. Because of these differences, the xhci
driver defines its own set of PLS macros in xhci-port.h, which are intended
to be used when reading and writing PORTSC. The generic USB Chapter 11
macros in ch11.h should only be used when parsing or replying to hub-class
USB requests.
To avoid mixing these two representations and prevent incorrect state
reporting, replace all uses of Chapter 11 PLS macros with the xHCI
versions when interacting with the PORTSC register.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In Set Port Feature requests, the upper byte of 'wIndex' encodes
feature-specific parameters. The current code reads these upper bits in
an early pre-processing block, and then the same feature is handled again
later in the main switch statement. This results in duplicated condition
checks and makes the control flow harder to follow.
Move all feature-specific extraction of 'wIndex' upper bits into the
main SetPortFeature logic so that each feature is handled in exactly one
place. This reduces duplication, makes the handling clearer, and keeps
'wIndex' parsing local to the code that actually uses the values.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several helper functions take a parameter named 'wIndex', but the
value they receive is not the raw USB request wIndex field. The only
function that actually processes the USB hub request parameter is
xhci_hub_control(), which extracts the relevant port number (and other
upper-byte fields) before passing them down.
To avoid confusion between the USB request parameter and the derived
0-based port index, rename all such function parameters from 'wIndex'
to 'portnum'. This improves readability and makes the call intentions
clearer.
When a function accept struct 'xhci_port' pointer, use its port number
instead.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB request parameter 'wIndex' is a 16-bit field whose meaning depends
on the request type. For hub port operations, only bits 7:0 encode the port
number (1..MaxPorts). Despite this, the current code extracts the port
number into 'portnum1' while also modifying and using 'wIndex' directly as
a 0-based port index. This dual use is both confusing and error-prone,
since 'wIndex' is not always a pure port number.
Clean this up by deriving a single 0-based 'portnum' from 'wIndex' and
using it throughout the function. The original 'wIndex' value is no longer
modified or treated as a port number. This also matches existing xhci code.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On resume from S4 (power loss after suspend/hibernation), the xHCI
driver previously freed, reallocated, and fully reinitialized all
data structures. Most of this is unnecessary because the data is
restored from a saved image; only the xHCI registers lose their values.
This patch optimizes S4 resume by performing only a host controller
reset, which includes:
* Freeing or clearing runtime-created data.
* Rewriting xHCI registers.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve debug output for suspend failures, particularly when the controller
handshake does not complete. This will become important as upcoming patches
significantly rework the resume path, making more detailed suspend-side
messages valuable for debugging.
Add an explicit check of the Save/Restore Error (SRE) flag after a
successful Save State (CSS) operation. The xHCI specification
(note in section 4.23.2) states:
"After a Save or Restore State operation completes, the
Save/Restore Error (SRE) flag in USBSTS should be checked to
ensure the operation completed successfully."
Currently, the SRE error is only observed and warning is printed.
This patch does not introduce deeper error handling, as the correct
response is unclear and changes to suspend behavior may risk regressions
once the resume path is updated.
Additionally, simplify and clean up the suspend USBSTS CSS/SSS
handling code, improving readability and quirk handling for AMD
SNPS xHC controllers that occasionally do not clear the SSS bit.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move ring initialization from xhci_ring_alloc() to xhci_ring_init().
Call xhci_ring_init() after xhci_ring_alloc(); in the future,
it can also be used to re-initialize the ring during resume.
Additionally, remove xhci_dbg_trace() from xhci_mem_init(). The command
ring's first segment DMA address is now printed during the trace call in
xhci_ring_init().
This refactoring lays also the groundwork for eventually replacing:
* xhci_dbc_ring_init()
* xhci_clear_command_ring()
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce xhci_rh_bw_cleanup() to release all bandwidth tracking
structures associated with xHCI roothub ports.
The new helper clears:
* TT bandwidth entries
* Per-interval endpoint lists
This refactors and consolidates the existing per-port cleanup logic
previously embedded in xhci_mem_cleanup(), reducing duplication and
making the teardown sequence easier to follow.
The helper will also be reused for upcoming S4 resume handling.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A Restore Error or Host Controller Error indicates that the host controller
failed to resume after suspend. In such cases, the xhci driver is fully
re-initialized, similar to a post-hibernation scenario.
The existing error check is only relevant when 'power_lost' is false.
If 'power_lost' is true, a Restore or Controller error has no effect:
no warning is printed and the 'power_lost' state remains unchanged.
Move the entire error check into the if '!power_lost' condition
to make this dependency explicit and simplify the resume logic.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function compliance_mode_recovery_timer_init() is called from
xhci_init() because the Compliance Mode Recovery Timer (CMRT) must be set
up before xhci_run() when the xhci driver is re-initialized.
To handle this case, the boolean flag 'comp_timer_running' was introduced
to track whether xhci_run() had already been called, ensuring that
xhci_resume() would not invoke compliance_mode_recovery_timer_init()
a second time.
This can be simplified by moving the 'done' label in xhci_resume() to
after the compliance_mode_recovery_timer_init() call. With this change,
the timer initialization runs only when the xhci driver has not been
re-initialized, making the 'comp_timer_running' flag unnecessary and
allowing it to be removed.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace kernel USB speed numbers with xHCI protocol IDs expected by HW.
They are numerically equal up to high speed, but instead of SuperSpeed
we were querying SuperSpeed+.
Gen1 hardware rejects such commands with TRB Error, which resulted in
zero available bandwidth being shown.
While at that, report failures properly. No attempt made at "tunneling"
all possible comp codes through errno, debugfs users may inspect the
result through event-ring/trbs.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USBSTS is mostly RW1C, so to clear EINT we should write just this
one bit. Remove pointless code which ORs the bit with current value
of the register, even though the bit is already known to be set,
and writes the result back, which clears all active RW1C flags.
We used to inadvertently clear PCD and SRE in this way. PCD isn't
used by the driver and SRE is only used at resume, so clearing them
should make no difference. Don't clear them anymore.
Tested by connecting and mounting a storage device on a few HCs.
Before: xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000000
xhci_irq USBSTS 0x00000008 EINT -> 0x00000000
After: xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000010 PCD
xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000010 PCD
Some flags are RsvdZ - should be written as zero regardless of the
value read, so technically it was a bug. But no problems are known.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip_pad_iso() repositions ISO frame data within the transfer buffer
via memmove(). Neither the source offset (actualoffset, derived by
subtracting wire-supplied actual_length values) nor the destination
offset (iso_frame_desc[i].offset, taken directly from the wire) is
bounds-checked.
If a crafted actual_length wraps actualoffset negative through the
subtraction (see patch 2/3 for the root cause), the memmove source
points before the allocation - slab OOB read, data returned to
userspace.
Independently, iso_frame_desc[i].offset is never validated against
transfer_buffer_length. Setting offset past the end of the buffer
gives a fully controlled OOB write into whatever sits next in the
slab - confirmed with offset=400 on a 392-byte buffer, 64-byte write.
Add bounds checks for both the source and destination ranges before
each memmove call. Use unsigned comparisons after the sign check on
actualoffset to avoid signed/unsigned conversion surprises.
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-3-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip_recv_iso() sums each frame's actual_length into an int
accumulator without checking the individual values first:
total_length += urb->iso_frame_desc[i].actual_length;
A malicious server can send actual_length = 0xFFFFFFFC for one frame
and a small value for the other, making the signed sum wrap around to
match urb->actual_length. The sanity check passes, and usbip_pad_iso()
later computes a negative actualoffset, feeding it to memmove() as a
source pointer - reads before the allocation, leaked to userspace via
USBDEVFS_REAPURB.
Reject any frame whose actual_length exceeds transfer_buffer_length
(one frame can't carry more data than the whole buffer), and widen the
accumulator to u32 so that many moderately-large frames can't wrap it
either.
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-2-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip_recv_iso() computes the iso descriptor buffer size as:
int size = np * sizeof(*iso);
where np comes straight from the wire (urb->number_of_packets, set by
usbip_pack_ret_submit() before we get here). With np = 0x10000001 and
sizeof(*iso) == 16 the product is 0x100000010 which truncates to 16 on
a 32-bit int. kzalloc(16) succeeds but the following receive loop
writes np * 16 bytes into it - game over.
USBIP_MAX_ISO_PACKETS (1024) already exists in usbip_common.h for the
submit path but was never enforced on the receive side.
Clamp np to [1, USBIP_MAX_ISO_PACKETS] and switch to kcalloc() so
the allocator itself can catch overflows in the future. Fold the
existing np == 0 early return into the new bounds check.
usbip_pack_ret_submit() already copied the bogus np into
urb->number_of_packets before we run, so just returning -EPROTO is
not enough - processcompl() in the HCD will still iterate that many
iso_frame_desc entries when it completes the failed URB. Zero out
urb->number_of_packets before bailing to prevent that secondary crash
(confirmed on 6.12.0, processcompl+0x63 with CR2 in unmapped slab).
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-1-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces support for operating the Cadence USBSSP (cdnsp)
controller in a peripheral-only mode, bypassing the Dual-Role Device (DRD)
logic.
The change in BAR indexing (from BAR 2 to BAR 1) is a direct
consequence of switching from 64-bit to 32-bit addressing in the
Peripheral-only configuration.
Tested on PCI platform with Device-only configuration. Platform-side
changes are included to support the PCI glue layer's property injection.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Link: https://patch.msgid.link/20260331-device_only-v1-1-00378b80365c@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the USB authentication extensions to the
uapi chapter 9 declarations, so that user space tools
correctly operate on the descriptor and commands.
This is necessary for sniffing and debugging in gadget
mode to correctly work, even though the kernel
does not use these requests in host mode.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260319144715.2957358-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The top-level part defines variable number of clocks and interrupts, and
each "if:then:" block narrows them. It however narrows only the
maxItems leaving minItems undefined, which then takes different values
depending on dtschema being used.
Recommended style is to avoid ambiguity in such case, thus if top-level
part has broad constraints, then each "if:then:" must specify both upper
and lower limits.
Add missing constraints, mostly minItems but also maxItems for one
variant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260323-dt-bindings-snps-qcom-dwc3-cleanup-v2-2-3bcd37c0a5b5@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman
Michal Pecio
Niklas Neronin
Oliver Neukum
Kelvin Mbogo
Pawel Laszczak
Amit Sunil Dhamne
Michael Zimmermann
Yixun Lan
Krzysztof Kozlowski