Firmware 2417 for the Scarlett 4th Gen 2i2 moved the direct monitor
gain parameter by 4 bytes, from offset 0x2a0 to 0x2a4, breaking the
"Direct Monitor X Mix Y" controls.
Special-case the offset in the get/set config helpers when the
running firmware is 2417 or later.
Fixes: 4e809a2996 ("ALSA: scarlett2: Add support for Solo, 2i2, and 4i4 Gen 4")
Cc: <stable@vger.kernel.org>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/ahIWTueUlWA5xiV+@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cs35l56_hda_read_acpi() gets an allocated ACPI _SUB string from
acpi_get_subsystem_id(). On success, that string is used to create the
firmware system name.
Several error paths after the _SUB lookup can return without releasing
the allocated string. This includes speaker ID lookup errors other than
-ENOENT, and errors after a firmware system name has been allocated.
Use scoped cleanup for the temporary _SUB string and make
cs35l56->system_name device-managed. This releases the temporary _SUB
string on every error path and lets devres release the firmware system
name on probe failure and device removal.
Fixes: 6f03b446cb ("ALSA: hda: cs35l56: Add support for speaker id")
Fixes: 40b1c2f9b2 ("ALSA: hda/cs35l56: Workaround bad dev-index on Lenovo Yoga Book 9i GenX")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260522-alsa-cs35l56-system-name-leak-v4-1-a6154dd09cd9@gmail.com
The BIOS on the Lenovo Yoga Slim 7 14AGP11 (AMD Ryzen AI / Kraken
Point chassis; board LNVNB161216, product 83QS) programs the PCI
subsystem ID of the HDA function as 17aa:0000. As a result no entry
in alc269_fixup_tbl[] matches via SND_PCI_QUIRK, the fixup falls back
to the generic auto-routing path, and the bass speaker pin is left
mis-routed. Laptop speakers sound noticeably thin.
The codec's own internal subsystem ID register reports 0x17aa394c
correctly, so an HDA_CODEC_QUIRK entry (which matches on the codec
SSID rather than on the PCI SSID) binds the chassis to the existing
ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN fixup. This mirrors the same
workaround already in place for the closely-related Yoga 7 2-in-1
14AKP10 and 16AKP10 entries earlier in the table.
With this change the kernel log goes from
ALC287: picked fixup for PCI SSID 17aa:0000
to
ALC287: picked fixup alc287-yoga9-bass-spk-pin
and speaker routing matches what the firmware intended. Verified by
the reporter against the equivalent modprobe override
(model=,alc287-yoga9-bass-spk-pin).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221438
Signed-off-by: Kris Kater <kris@kater.nu>
Link: https://patch.msgid.link/20260522060902.9423-1-kris@kater.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The comment for the pin configuration 0x21 in the fixup
ALC299_FIXUP_PREDATOR_SPK states "use as headset mic, without its own
jack detect", but the fixup name and the actual usage indicate that the
pin is meant to be used as internal speaker. Correct the comment to
avoid confusion.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260522060742.1384390-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The register DSP event queue is updated under parser->lock, but
snd_motu_register_dsp_message_parser_count_event() reads pull_pos and
push_pos without the lock.
snd_motu_register_dsp_message_parser_copy_event() also reads both queue
positions before taking the lock.
Protect these accesses with parser->lock as well. This keeps the hwdep
poll/read path consistent with the producer side and with the cached
meter/parameter accessors.
Fixes: 634ec0b290 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260521-alsa-firewire-motu-event-locking-v1-1-708e1c2b5e56@gmail.com
ASoC: Fixes for v7.1
A bigger batch of fixes than usual due to -next not happeing last week,
this is mostly stuff for laptops - a lot of quirks and small fixes,
mainly for x86 and SoundWire. Nothing too big or exciting individually,
just two week's worth.
For PTL onwards Cirrus are intending to rely on function topologies,
rather than using a match table for each system type. Remove this
unnecessary match table entry. Having the match entries can
mean that systems match when they should use function topologies
instead, resulting in incorrect audio configurations. Although,
admittedly this is not too likely with this 6x amp configuration
as those are quite rare, but best to follow best practice.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For PTL onwards Cirrus are intending to rely on function
topologies, rather than using a match table for each system
type. Chrome systems tend to have custom magic in the topology
and thus need to load a specific file. This causes problems as
these system can have the same layout as generic laptops causing
the match to apply to other laptops. Add a DMI quirk that forces
these matches to only apply to specific devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite cs_amp_create_debugfs() so that dput() will be called on
a valid dentry returned from debugfs_lookup().
The pointer returned from debugfs_lookup() must be released by dput().
The pointer returned from debugfs_create_dir() does not need to be
passed to dput().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: cdd27fa329 ("ASoC: cs-amp-lib: Add helpers for factory calibration")
Link: https://patch.msgid.link/20260521122511.987322-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When calculating data->count replace the incorrect sizeof(data) with use
of struct_offset().
The faulty sizeof(data) was incorrectly calculating the size of the
pointer instead of the size of the struct pointed to. As it happens, both
values are 8 on a 64-bit CPU. In the unlikely event of using this code on
a 32-bit CPU the number of available bytes would be calculated 4 larger
than is actually available.
Instead of changing to sizeof(*data) it has been replaced by
struct_offset() because it has better chance of detecting these sorts of
typos. Also the offset of the data[] array is actually what we want to know
here anyway.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2b62e66626 ("ASoC: cs-amp-lib: Add function to write calibration to UEFI")
Link: https://patch.msgid.link/20260521122511.987322-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use flush_work() instead of cancel_work_sync() to terminate pending IRQ
work in cs35l56_sdw_remove(). And flush_work() again after masking the
interrupts to flush any queueing that was racing with the masking. This is
the same sequence as cs35l56_sdw_system_suspend().
cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering-
down before the interrupt status can be read and handled. The work releases
this pm_runtime. So cancelling it, instead of flushing, could leave an
unbalanced pm_runtime.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
seq_ump_process_event() borrows client->out_rfile.output without
synchronizing with the first-open and last-close transition in
seq_ump_client_open() and seq_ump_client_close().
The last output unuse can therefore drop opened[STR_OUT] to zero and
release the rawmidi file while an in-flight event_input callback is still
inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream
runtime exposed to teardown before the write path has taken its own
buffer reference.
Add a per-client rwlock for the event_input-visible output file. Publish
a newly opened output file under the write side, and hold the read side
from the output lookup through snd_rawmidi_kernel_write(). The last
output close copies and clears the visible output file under the write
side, then drops the lock and releases the saved rawmidi file. Use
IRQ-safe rwlock guards because event_input can also be reached from
atomic sequencer delivery.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: event_input path path B label: last unuse path
1. seq_ump_process_event() reads 1. seq_ump_client_close()
client->out_rfile.output. drops opened[STR_OUT] to zero.
2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release()
has not yet pinned runtime. closes the output file.
3. The writer continues using 3. close_substream() frees
the borrowed substream. substream->runtime.
This keeps the output substream and runtime alive for the full
event_input write while keeping rawmidi release outside the rwlock.
KASAN reproduced this as a slab-use-after-free in
snd_rawmidi_kernel_write1(), with allocation through
seq_ump_use()/snd_seq_port_connect() and free through
seq_ump_unuse()/snd_seq_port_disconnect().
Suggested-by: Takashi Iwai <tiwai@suse.de>
Validation reproduced this kernel report:
KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400
RIP: 0033:0x7f5528af837f
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_rawmidi_kernel_write1+0x9d/0x400 (?:?)
__asan_load8+0x82/0xb0 (?:?)
update_stack_state+0x1ef/0x2d0 (?:?)
snd_rawmidi_kernel_write+0x1a/0x20 (?:?)
seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82)
__snd_seq_deliver_single_event+0x8a/0xe0 (?:?)
snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?)
lock_acquire+0x14e/0x2e0 (?:?)
find_held_lock+0x31/0x90 (?:?)
snd_seq_port_use_ptr+0xa6/0xe0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
do_raw_read_unlock+0x32/0xa0 (?:?)
_raw_read_unlock+0x26/0x50 (?:?)
snd_seq_deliver_single_event+0x45c/0x4b0 (?:?)
snd_seq_deliver_event+0x10d/0x1b0 (?:?)
snd_seq_client_enqueue_event+0x192/0x240 (?:?)
snd_seq_write+0x2cd/0x450 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
security_file_permission+0x51/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
__fget_files+0x12b/0x220 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__rcu_read_unlock+0x74/0x2d0 (?:?)
__fget_files+0x135/0x220 (?:?)
ksys_write+0x15a/0x180 (?:?)
rcu_is_watching+0x24/0x60 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Link: https://patch.msgid.link/20260520103249.3048345-1-rollkingzzc@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_hwdep_write() rejects writes when offset + count is greater than
or equal to the selected flash segment size. That incorrectly treats a
write ending exactly at the end of the segment as out of space, although
the last byte written is still within the segment.
Split invalid argument checks from the segment-space check, keep
zero-length writes as no-ops, and compare count against the remaining
segment size. This permits exact-end writes and avoids relying on
offset + count before deciding whether the request is in bounds.
Fixes: 1abfbd3c95 ("ALSA: scarlett2: Add support for uploading new firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260519-alsa-scarlett2-flash-write-boundary-v1-1-b550480e92da@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pending irq work might be still floating while the assigned stream
has been already closed, which may lead to UAF, especially when
another async work for fasync is involved.
For addressing this, extend the hda_controller_ops for allowing the
extra cleanup procedure that is specific to the controller driver, and
make sure to cancel and sync the pending irq work at each PCM close
before releasing the resources.
Reported-by: Jake Lamberson <lamberson.jake@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-2-tiwai@suse.de
Currently, the delayed IRQ handling for PCM streams is managed in a
single work embedded in hda_intel, but this is basically a per-stream
thing. Due to the single work, we can't cancel the work properly at
closing each stream, for example.
For making the IRQ pending work to be stream-based, this patch changes
the following:
- An extended version of azx_dev (i.e. the hd-audio stream object) is
defined for snd-hda-intel
- The irq_pending flag and irq_pending_work are moved to
hda_intel_stream, so that they can be hda-intel stream specific
- The stream creation and assignment are refactored so that
snd-hda-intel can handle individually;
the snd-hda-intel specific workaround for stream tags is also moved
to snd-hda-intel itself instead of the common code
- The irq pending work is canceled properly at free / shutdown
While we're at it, changed the bit field flag to bool, as the bit
field doesn't help much in our case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-1-tiwai@suse.de
find_format_descriptor() walks the class-specific interface extras by
advancing with bLength. It rejects descriptors that extend past the
remaining buffer, but it does not reject descriptor lengths smaller than
a USB descriptor header.
Reject too-short descriptors before using bLength to advance the local
scan. This keeps the UA-101 parser robust against malformed descriptor
data and matches the usual USB descriptor walking rules.
Fixes: 63978ab3e3 ("sound: add Edirol UA-101 support")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260519-alsa-ua101-desc-len-v1-1-4307d1a5e054@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_seq_create_port() walks client->ports_list_head looking for
the ordered insertion point and on loop fall-through passes
&p->list to list_add_tail():
list_for_each_entry(p, &client->ports_list_head, list) {
if (p->addr.port == port) {
kfree(new_port);
return -EBUSY;
}
if (p->addr.port > num)
break;
...
}
list_add_tail(&new_port->list, &p->list);
When the loop walks all entries without break (e.g., the new
port sorts last), p is past-the-end. &p->list aliases
&client->ports_list_head (the list head) via container_of offset
cancellation, so the insert lands at the list tail. That is the
intended behaviour, but the access is undefined per C11 even
though it works in practice.
Track an explicit insert_before pointer initialised to the list
head and overwritten to &p->list only when the loop breaks
early. The observable behaviour is unchanged.
Fixes: 9244b2c307 ("[ALSA] alsa core: convert to list_for_each_entry*")
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260518194023.1667857-3-maoyixie.tju@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_timer_dev_register() walks snd_timer_list looking for the
ordered insertion point and on loop fall-through passes
&timer1->device_list to list_add_tail():
list_for_each_entry(timer1, &snd_timer_list, device_list) {
...
break; /* on found-position */
...
}
list_add_tail(&timer->device_list, &timer1->device_list);
When the loop walks all entries without break, timer1 is
past-the-end. &timer1->device_list aliases &snd_timer_list (the
list head) via container_of offset cancellation, so the insert
lands at the list tail. That is the intended behaviour, but the
access is undefined per C11 even though it works in practice.
Track an explicit insert_before pointer initialised to the list
head and overwritten to &timer1->device_list only when the loop
breaks early. The observable behaviour is unchanged.
Fixes: 9244b2c307 ("[ALSA] alsa core: convert to list_for_each_entry*")
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260518194023.1667857-2-maoyixie.tju@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the SAI peripheral is left in a running state by the bootloader,
the driver can experience an interrupt storm during probe that prevents
successful initialization. This occurs because the current code registers
the IRQ handler before resetting the hardware to a known state.
The issue manifests as:
- Continuous interrupts firing immediately after devm_request_irq()
- Driver probe failure or system hang
- Error messages about unhandled interrupts
This is particularly problematic on systems where U-Boot or other
bootloaders enable SAI for boot-time audio feedback or diagnostics
and don't properly disable it before handing control to Linux.
Fix this by reordering the probe sequence:
1. Add fsl_sai_reset_hw() to clear TCSR/RCSR control registers,
which disables the transmitter/receiver and all interrupt sources
2. Move devm_request_irq() to after hardware initialization
This ensures the SAI is in a clean reset state before the interrupt
handler can be invoked, preventing the storm while maintaining proper
error handling and cleanup paths.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260512065252.75859-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP Z66 G6 14 inch laptop uses the ALC236 codec with subsystem ID
0x103c:8df7. Without a quirk entry, the PCI SSID falls back to the
generic 0x103c:0000 fixup, which does not configure the mute/micmute
LED GPIOs correctly.
Add the SND_PCI_QUIRK entry for this model using
ALC236_FIXUP_HP_GPIO_LED, matching the surrounding HP EliteBook G12
entries (0x8dec-0x8dfe) which share the same ALC236 codec and GPIO LED
layout.
Signed-off-by: Minxi Hou <houminxi@gmail.com>
Link: https://patch.msgid.link/20260518031542.2899188-1-houminxi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull tracing fixes from Steven Rostedt:
- Add more functions to the remote allowed list
randconfig found more functions that are allowed for the remote code
for s390 and arm. Add them to the allowed list.
- Fix remote_test error path
If one of the simple ring buffers fails to load, the code is supposed
to rollback its initialized buffers. Instead of rolling back the
buffers for the failed load, it uses the global variable and rolls
back all the successfully loaded buffers.
* tag 'trace-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix desc in error path for the trace remote test module
ring-buffer remote: Avoid unexpected symbol warnings (arm, s390)
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect.
Fixes: 3e385c0d6c ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Roth <michael.roth@amd.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 fix from Ingo Molnar:
- Fix x86 boot crash for non-kjump kexecs (David Woodhouse)
* tag 'x86-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kexec: Push kjump return address even for non-kjump kexec
Pull timer fix from Ingo Molnar:
- Fix potential garbage reads in the vDSO gettimeofday code
(Thomas Weißschuh)
* tag 'timers-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/gettimeofday: Reload sequence counter after switch to time page in do_aux()
Pull IRQ fixes from Ingo Molnar:
- Fix use-after-free in irq_work_single() on PREEMPT_RT (Jiayuan Chen)
- Don't call add_interrupt_randomness() for NMIs in
handle_percpu_devid_irq() (Mark Rutland)
- Remove unused function in the ath79-cpu irqchip driver causing LKP
CI build warnings (Rosen Penev)
- Fix IRQ allocation/teardown leakage regressions in the GICv5 irqchip
driver (Sascha Bischoff)
- Fix an IRQ trigger type regression in the Meson S4 SoC irqchip driver
(Xianwei Zhao)
- Fix CPU offlining regression in the RiscV IMSIC irqchip driver
(Yong-Xuan Wang)
* tag 'irq-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
irqchip/riscv-imsic: Clear interrupt move state during CPU offlining
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
irqchip/ath79-cpu: Remove unused function
genirq/chip: Don't call add_interrupt_randomness() for NMIs
irqchip/gic-v5: Allocate ITS parent LPIs as a range
irqchip/gic-v5: Support range allocation for LPIs
irqchip/gic-v5: Move LPI allocation into the LPI domain
Pull RISC-V fixes from Paul Walmsley:
"Relatively low-impact fixes. Probably the most notable one is that we
no longer ask the monitor-mode firmware to delegate misaligned access
handling to the kernel by default, since the kernel code needs
significant improvement to match the functionality of the firmware.
This change avoids functional problems at some cost in performance,
but shouldn't affect any system with misaligned access handling in
hardware.
- Disable satp register probing when no5lvl is specified on the
kernel command line
- Fix a CFI-related issue with the misaligned access speed
measurement code
- Reduce the CFI shadow stack size limit from 4GB to 2GB (following
ARM64 GCS)
- Prevent the kernel from requesting delegation of misaligned access
faults unless a new Kconfig option, RISCV_SBI_FWFT_DELEGATE_MISALIGNED,
is enabled. This will depend on CONFIG_NONPORTABLE until the
deficiencies of the kernel misaligned access fixup code are fixed
- Fix some potential uninitialized memory accesses in error paths in
compat_riscv_gpr_set() and compat_restore_sigcontext()
- Fix a bug in the RISC-V MIPS vendor errata patching code where a
logical-and was used in place of a bitwise-and
- Drop some unnecessary code in riscv_fill_hwcap_from_isa_string()
- Use macros for isa2hwcap indices in riscv_fill_hwcap(), rather than
open-coding them
- Fix some documentation typos (one affecting 'make htmldocs')"
* tag 'riscv-for-linus-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: misaligned: Make enabling delegation depend on NONPORTABLE
riscv: Docs: fix unmatched quote warning
riscv: cfi: reduce shadow stack size limit from 4GB to 2GB
riscv: cpufeature: Use pre-defined ISA ext macros to index isa2hwcap
riscv: mm: Fixup no5lvl failure when vaddr is invalid
riscv: Fix register corruption from uninitialized cregs on error
riscv: errata: Fix bitwise vs logical AND in MIPS errata patching
Documentation: riscv: cmodx: fix typos
riscv: cpufeature: Drop this_hwcap clear in T-Head vector workaround
riscv: Define __riscv_copy_{,vec_}{words,bytes}_unaligned() using SYM_TYPED_FUNC_START
During initialisation in remote_test_load(), if one of the
simple_ring_buffer fails to initialise, the error path attempts to
rollback initialised buffers. However, the rollback incorrectly uses the
global pointer to the trace descriptor, which is only set upon
successful load completion. Fix the error path by using the local
pointer to the descriptor.
Link: https://patch.msgid.link/20260515201616.337469-1-vdonnefort@google.com
Fixes: ea908a2b79 ("tracing: Add a trace remote module for testing")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
base-commit: 5d6919055d
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull powerpc fixes from Madhavan Srinivasan:
- Fix preempt count leak in sysfs show paths
- Fix error handling in pika_dtm_thread
- Remove pmac_low_i2c_{lock,unlock}()
- Enable all windfarms by default
- Fix dead default for GUEST_STATE_BUFFER_TEST
- Remove redundant preempt_disable|enable() calls from
arch_irq_work_raise()
Thanks to Aboorva Devarajan, Ally Heev, Amit Machhiwal, Bart Van Assche,
Christophe Leroy, Christophe Leroy (CS GROUP), Dan Carpenter, Gautam
Menghani, Harsh Prateek Bora, Julian Braha, Krzysztof Kozlowski, Linus
Walleij, Ma Ke, Ritesh Harjani (IBM), and Sayali Patil
* tag 'powerpc-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise()
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
powerpc: fix dead default for GUEST_STATE_BUFFER_TEST
powerpc/powermac: Remove pmac_low_i2c_{lock,unlock}()
powerpc/warp: Fix error handling in pika_dtm_thread
powerpc: 82xx: fix uninitialized pointers with free attribute
powerpc/g5: Enable all windfarms by default
Sashiko reports:
lm90_alert() executes in the smbus alert context and calls
lm90_update_confreg() to disable the hardware alert line, without
acquiring hwmon_lock.
Concurrently, sysfs write operations (such as lm90_write_convrate) hold
the hwmon_lock, temporarily modify data->config, and then restore it.
If an alert interrupt occurs concurrently with a sysfs write, the sysfs
path will overwrite the alert handler's modifications to data->config
and the hardware register.
This unintentionally re-enables the hardware alert line while the alarm is
still active, causing an interrupt storm.
Add the missing lock to lm90_alert() to solve the problem.
Fixes: 7a1d220ccb ("hwmon: (lm90) Introduce function to update configuration register")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
In lm90_probe(), the devm action to cancel the alert_work and report_work
(lm90_restore_conf) is registered in lm90_init_client() before
devm_hwmon_device_register_with_info() is called.
Because devm executes cleanup actions in reverse order during module
unbind or probe failure, the hwmon device is unregistered and freed first.
If lm90_alert_work() or lm90_report_alarms() runs in the window between
the hwmon device being freed and the delayed works being cancelled,
lm90_update_alarms() will dereference the freed data->hwmon_dev here.
Fix the problem by canceling the workers separately after registering
the hwmon device and before registering the interrupt handler. This ensures
that the workers are canceled after interrupts are disabled and before
the hwmon device is released. Add "shutdown" flag to indicate that device
shutdown is in progress to prevent workers from being re-armed.
Fixes: f6d0775119 ("hwmon: (lm90) Rework alarm/status handling")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Mirror of Mark Brown's ASoC: hdac_hdmi rate-limit patch (commit
[lkml.kernel.org/lkml/2025/6/13/1380]) for the generic snd_parse_eld()
helper used by ASoC hdmi-codec.
When a HDMI sink is disconnected (e.g. a board with two HDMI outputs and
only one cable), userspace audio servers like PipeWire keep probing the
disconnected card and trigger:
HDMI: Unknown ELD version 0
at every probe — easily 30+ messages per burst on rk3588. The same
applies to malformed ELD (MNL out of range). Both conditions are
expected when no sink is attached; rate-limit the dev_info() so the
kernel ring buffer does not fill up.
Signed-off-by: Francesco Saverio Pavone <pavone.lawyer@gmail.com>
Link: https://patch.msgid.link/20260516141244.21801-1-pavone.lawyer@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Zhang Heng
Edson Juliano Drosdeck
Geoffrey D. Bennett
Cássio Gabriel
Kris Kater
Takashi Iwai
Jeongjun Park
Charles Keepax
Balamurugan C
Jairaj Arava
Mark Brown
Richard Fitzgerald
Peter Ujfalusi
Zhang Cen
Marius Hoch
Robertus Diawan Chris
Maoyi Xie
Shengjiu Wang
Minxi Hou
Linus Torvalds
Aryan Kushwaha
Carlos López
Vincent Donnefort
Guenter Roeck
Francesco Saverio Pavone