[ Upstream commit c8dbdc6e38 ]
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock.
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Closes: https://lore.kernel.org/all/OS7PR01MB13602B128BA1AD3FA38B6D1FFBC69A@OS7PR01MB13602.jpnprd01.prod.outlook.com/
Fixes: 06f502f57d ("leds: trigger: Introduce a NETDEV trigger")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://patch.msgid.link/20260222152601.1978655-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ adapted condition to preserve existing `!phy_driver_is_genphy_10g(phydev)` guard ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb868db5f4 ]
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers.
Cc: stable@vger.kernel.org
Fixes: a6fb8d5a8b ("gve: Tx path for DQO-QPL")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260220215324.1631350-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ netmem_dma_unmap_page_attrs() => dma_unmap_page() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a09dc10d13 ]
There are two places where ksmbd_vfs_kern_path_end_removing() needs to be
called in order to balance what the corresponding successful call to
ksmbd_vfs_kern_path_start_removing() has done, i.e. drop inode locks and
put the taken references. Otherwise there might be potential deadlocks
and unbalanced locks which are caught like:
BUG: workqueue leaked lock or atomic: kworker/5:21/0x00000000/7596
last function: handle_ksmbd_work
2 locks held by kworker/5:21/7596:
#0: ffff8881051ae448 (sb_writers#3){.+.+}-{0:0}, at: ksmbd_vfs_kern_path_locked+0x142/0x660
#1: ffff888130e966c0 (&type->i_mutex_dir_key#3/1){+.+.}-{4:4}, at: ksmbd_vfs_kern_path_locked+0x17d/0x660
CPU: 5 PID: 7596 Comm: kworker/5:21 Not tainted 6.1.162-00456-gc29b353f383b #138
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x5b
process_one_work.cold+0x57/0x5c
worker_thread+0x82/0x600
kthread+0x153/0x190
ret_from_fork+0x22/0x30
</TASK>
Found by Linux Verification Center (linuxtesting.org).
Fixes: d5fc1400a3 ("smb/server: avoid deadlock when linking with ReplaceIfExists")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ ksmbd_vfs_kern_path_end_removing() call -> ksmbd_vfs_kern_path_unlock() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec3cfd835f upstream.
The internal control command descriptor used for no-op commands includes a
Transaction ID (TID) field, but the no-op command constructed in
hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a
no-op descriptor without the expected TID.
This bug has gone unnoticed because the TID is currently not validated in
the no-op completion path, but the descriptor format requires it to be
present.
Add the missing TID field when generating a no-op descriptor so that its
layout matches the defined command structure.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6d586431a upstream.
The DMA dequeue path attempts to restart the ring after aborting an
in-flight transfer, but the current sequence is incomplete. The controller
must be brought out of the aborted state and the ring control registers
must be programmed in the correct order: first clearing ABORT, then
re-enabling the ring and asserting RUN_STOP to resume operation.
Add the missing controller resume step and update the ring control writes
so that the ring is restarted using the proper sequence.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffd32db826 upstream.
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching odr and turning buffer off just afterward, we are
losing the FIFO ODR change flag and ODR switch is blocked.
Fix the issue by force applying any waiting ODR change when turning
buffer off.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9f3a59313 upstream.
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching to the same odr value, we end up waiting for a
FIFO ODR flag that is never happening.
Fix the issue by doing nothing and exiting properly when we are
switching to the same ODR value.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91f950b4cb upstream.
The return value of pm_runtime_get_sync() is not checked, and the
function always returns success. This allows I2C mux operations to
proceed even when the device fails to resume.
Use pm_runtime_resume_and_get() and propagate its return value to
properly handle resume failures.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acc3949aab upstream.
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f55b9510cd upstream.
This function refers to the Bosch BME680 API as the source of the
calculation, but one of the constants does not match the Bosch
implementation. This appears to be a simple transposition of two digits,
resulting in a wait time that is too short. This can cause the following
'device measurement cycle incomplete' check to occasionally fail, returning
EBUSY to user space.
Adjust the constant to match the Bosch implementation and resolve the EBUSY
errors.
Fixes: 4241665e6e ("iio: chemical: bme680: Fix sensor data read operation")
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L521
Signed-off-by: Chris Spencer <spencercw@gmail.com>
Acked-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85e4614524 upstream.
The MCP4131 wiper address is shifted twice when preparing the SPI
command in mcp4131_write_raw().
The address is already shifted when assigned to the local variable
"address", but is then shifted again when written to data->buf[0].
This results in an incorrect command being sent to the device and
breaks wiper writes to the second channel.
Remove the second shift and use the pre-shifted address directly
when composing the SPI transfer.
Fixes: 22d199a539 ("iio: potentiometer: add driver for Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X")
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>#
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c8bf4b604 upstream.
The regmap_read_poll_timeout() uses ADF4377_0000_SOFT_RESET_R_MSK
twice instead of checking both SOFT_RESET_MSK (bit 0) and
SOFT_RESET_R_MSK (bit 7). This causes an incomplete reset status check.
The code first sets both SOFT_RESET and SOFT_RESET_R bits to 1 via
regmap_update_bits(), then polls for them to be cleared. Since we set
both bits before polling, we should be waiting for both to clear.
Fix by using both masks as done in regmap_update_bits() above.
Fixes: eda549e2e5 ("iio: frequency: adf4377: add support for ADF4377")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5187e03b81 upstream.
The DS442x DAC uses sign-magnitude encoding, so -128 cannot be represented
in hardware (7-bit magnitude).
Previously, passing -128 resulted in a truncated value that programmed
0mA (magnitude 0) instead of the expected maximum negative current,
effectively failing silently.
Reject -128 to avoid producing the wrong current.
Fixes: d632a2bd8f ("iio: dac: ds4422/ds4424 dac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f475ee0eb upstream.
If we failed to update the root we don't abort the transaction, which is
wrong since we already used the transaction to remove an item from the
uuid tree.
Fixes: dd5f9615fc ("Btrfs: maintain subvolume items in the UUID tree")
CC: stable@vger.kernel.org # 3.12+
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87f2c46003 upstream.
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.
Fix this by doing an early check for item overflow before starting a
transaction. This is also race safe because we are holding the subvol_sem
semaphore in exclusive (write) mode.
A test case for fstests will follow soon.
Fixes: dd5f9615fc ("Btrfs: maintain subvolume items in the UUID tree")
CC: stable@vger.kernel.org # 3.12+
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d1ababded upstream.
If we attempt to create several files with names that result in the same
hash, we have to pack them in same dir item and that has a limit inherent
to the leaf size. However if we reach that limit, we trigger a transaction
abort and turns the filesystem into RO mode. This allows for a malicious
user to disrupt a system, without the need to have administration
privileges/capabilities.
Reproducer:
$ cat exploit-hash-collisions.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster and require fewer file
# names that result in hash collision.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# List of names that result in the same crc32c hash for btrfs.
declare -a names=(
'foobar'
'%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC'
'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z'
'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4'
'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:'
'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO'
'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us'
'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY'
'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO'
'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU'
'Ono7avN5GjC:_6dBJ_'
'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am'
'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k'
'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2'
'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd'
'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm'
'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ'
'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky'
'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS'
'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz'
'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu'
'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN'
'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4='
'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn'
'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C'
'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW'
'8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc'
'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mCaaKGxb990jzaagRktDTyp'
'9hD2ApKa_t_7x-a@GCG28kY:7$M@5udI1myQ$x5udtggvagmCQcq9QXWRC5hoB0o-_zHQUqZI5rMcz_kbMgvN5jr63LeYA4Cj-c6F5Ugmx6DgVf@2Jqm%MafecpgooqreJ53P-QTS'
)
# Now create files with all those names in the same parent directory.
# It should not fail since a 4K leaf has enough space for them.
for name in "${names[@]}"; do
touch $MNT/$name
done
# Now add one more file name that causes a crc32c hash collision.
# This should fail, but it should not turn the filesystem into RO mode
# (which could be exploited by malicious users) due to a transaction
# abort.
touch $MNT/'W6tIm-VK2@BGC@IBfcgg6j_p:pxp_QUqtWpGD5Ok_GmijKOJJt'
# Check that we are able to create another file, with a name that does not cause
# a crc32c hash collision.
echo -n "hello world" > $MNT/baz
# Unmount and mount again, verify file baz exists and with the right content.
umount $MNT
mount $DEV $MNT
echo "File baz content: $(cat $MNT/baz)"
umount $MNT
When running the reproducer:
$ ./exploit-hash-collisions.sh
(...)
touch: cannot touch '/mnt/sdi/W6tIm-VK2@BGC@IBfcgg6j_p:pxp_QUqtWpGD5Ok_GmijKOJJt': Value too large for defined data type
./exploit-hash-collisions.sh: line 57: /mnt/sdi/baz: Read-only file system
cat: /mnt/sdi/baz: No such file or directory
File baz content:
And the transaction abort stack trace in dmesg/syslog:
$ dmesg
(...)
[758240.509761] ------------[ cut here ]------------
[758240.510668] BTRFS: Transaction aborted (error -75)
[758240.511577] WARNING: fs/btrfs/inode.c:6854 at btrfs_create_new_inode+0x805/0xb50 [btrfs], CPU#6: touch/888644
[758240.513513] Modules linked in: btrfs dm_zero (...)
[758240.523221] CPU: 6 UID: 0 PID: 888644 Comm: touch Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[758240.524621] Tainted: [W]=WARN
[758240.525037] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[758240.526331] RIP: 0010:btrfs_create_new_inode+0x80b/0xb50 [btrfs]
[758240.527093] Code: 0f 82 cf (...)
[758240.529211] RSP: 0018:ffffce64418fbb48 EFLAGS: 00010292
[758240.529935] RAX: 00000000ffffffd3 RBX: 0000000000000000 RCX: 00000000ffffffb5
[758240.531040] RDX: 0000000d04f33e06 RSI: 00000000ffffffb5 RDI: ffffffffc0919dd0
[758240.531920] RBP: ffffce64418fbc10 R08: 0000000000000000 R09: 00000000ffffffb5
[758240.532928] R10: 0000000000000000 R11: ffff8e52c0000000 R12: ffff8e53eee7d0f0
[758240.533818] R13: ffff8e57f70932a0 R14: ffff8e5417629568 R15: 0000000000000000
[758240.534664] FS: 00007f1959a2a740(0000) GS:ffff8e5b27cae000(0000) knlGS:0000000000000000
[758240.535821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[758240.536644] CR2: 00007f1959b10ce0 CR3: 000000012a2cc005 CR4: 0000000000370ef0
[758240.537517] Call Trace:
[758240.537828] <TASK>
[758240.538099] btrfs_create_common+0xbf/0x140 [btrfs]
[758240.538760] path_openat+0x111a/0x15b0
[758240.539252] do_filp_open+0xc2/0x170
[758240.539699] ? preempt_count_add+0x47/0xa0
[758240.540200] ? __virt_addr_valid+0xe4/0x1a0
[758240.540800] ? __check_object_size+0x1b3/0x230
[758240.541661] ? alloc_fd+0x118/0x180
[758240.542315] do_sys_openat2+0x70/0xd0
[758240.543012] __x64_sys_openat+0x50/0xa0
[758240.543723] do_syscall_64+0x50/0xf20
[758240.544462] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[758240.545397] RIP: 0033:0x7f1959abc687
[758240.546019] Code: 48 89 fa (...)
[758240.548522] RSP: 002b:00007ffe16ff8690 EFLAGS: 00000202 ORIG_RAX: 0000000000000101
[758240.566278] RAX: ffffffffffffffda RBX: 00007f1959a2a740 RCX: 00007f1959abc687
[758240.567068] RDX: 0000000000000941 RSI: 00007ffe16ffa333 RDI: ffffffffffffff9c
[758240.567860] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[758240.568707] R10: 00000000000001b6 R11: 0000000000000202 R12: 0000561eec7c4b90
[758240.569712] R13: 0000561eec7c311f R14: 00007ffe16ffa333 R15: 0000000000000000
[758240.570758] </TASK>
[758240.571040] ---[ end trace 0000000000000000 ]---
[758240.571681] BTRFS: error (device sdi state A) in btrfs_create_new_inode:6854: errno=-75 unknown
[758240.572899] BTRFS info (device sdi state EA): forced readonly
Fix this by checking for hash collision, and if the adding a new name is
possible, early in btrfs_create_new_inode() before we do any tree updates,
so that we don't need to abort the transaction if we cannot add the new
name due to the leaf size limit.
A test case for fstests will be sent soon.
Fixes: caae78e032 ("btrfs: move common inode creation code into btrfs_create_new_inode()")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4c7210d2f upstream.
parse_server_interfaces() initializes interface socket addresses with
CIFS_PORT. When the mount uses a non-default port this overwrites the
configured destination port.
Later, cifs_chan_update_iface() copies this sockaddr into server->dstaddr,
causing reconnect attempts to use the wrong port after server interface
updates.
Use the existing port from server->dstaddr instead.
Cc: stable@vger.kernel.org
Fixes: fe856be475 ("CIFS: parse and store info on iface queries")
Tested-by: Dr. Thomas Orgis <thomas.orgis@uni-hamburg.de>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d78840a6a3 upstream.
SMB2_write() places write payload in iov[1..n] as part of rq_iov.
smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message()
encrypts iov[1] in-place, replacing the original plaintext with
ciphertext. On a replayable error, the retry sends the same iov[1]
which now contains ciphertext instead of the original data,
resulting in corruption.
The corruption is most likely to be observed when connections are
unstable, as reconnects trigger write retries that re-send the
already-encrypted data.
This affects SFU mknod, MF symlinks, etc. On kernels before
6.10 (prior to the netfs conversion), sync writes also used
this path and were similarly affected. The async write path
wasn't unaffected as it uses rq_iter which gets deep-copied.
Fix by moving the write payload into rq_iter via iov_iter_kvec(),
so smb3_init_transform_rq() deep-copies it before encryption.
Cc: stable@vger.kernel.org #6.3+
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a7d2729dc upstream.
When user application requests O_DIRECT|O_SYNC along with O_CREAT on
open(2), CREATE_NO_BUFFER and CREATE_WRITE_THROUGH bits were missed in
CREATE request when performing an atomic open, thus leading to
potentially data integrity issues.
Fix this by setting those missing bits in CREATE request when
O_DIRECT|O_SYNC has been specified in cifs_do_create().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 560f763baa upstream.
The bounds check for brace_index happens after the array write.
While the current call pattern prevents an actual out-of-bounds
access (the previous call would have returned an error), the
write-before-check pattern is fragile and would become a real
out-of-bounds write if the error return were ever not propagated.
Move the bounds check before the array write so the function is
self-contained and safe regardless of caller behavior.
Link: https://lore.kernel.org/all/20260312191143.28719-3-objecting@objecting.org/
Fixes: ead1e19ad9 ("lib/bootconfig: Fix a bug of breaking existing tree nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1120a36bb1 upstream.
snprintf() returns the number of characters that would have been
written excluding the NUL terminator. Output is truncated when the
return value is >= the buffer size, not just > the buffer size.
When ret == size, the current code takes the non-truncated path,
advancing buf by ret and reducing size to 0. This is wrong because
the output was actually truncated (the last character was replaced by
NUL). Fix by using >= so the truncation path is taken correctly.
Link: https://lore.kernel.org/all/20260312191143.28719-4-objecting@objecting.org/
Fixes: 76db5a27a8 ("bootconfig: Add Extra Boot Config support")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cc7dd77a1 upstream.
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ]
Fixes: 6e1cb38a2a ("x64, x2apic/intr-remap: add x2apic support, including enabling interrupt-remapping")
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260306-x2apic-fix-v2-1-bee99c12efa3@sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39ebc8d7f5 upstream.
__xbc_open_brace() pushes entries with post-increment
(open_brace[brace_index++]), so brace_index always points one past
the last valid entry. xbc_verify_tree() reads open_brace[brace_index]
to report which brace is unclosed, but this is one past the last
pushed entry and contains stale/zero data, causing the error message
to reference the wrong node.
Use open_brace[brace_index - 1] to correctly identify the unclosed
brace. brace_index is known to be > 0 here since we are inside the
if (brace_index) guard.
Link: https://lore.kernel.org/all/20260312191143.28719-2-objecting@objecting.org/
Fixes: ead1e19ad9 ("lib/bootconfig: Fix a bug of breaking existing tree nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c527c7e03 upstream.
During online processing for a DASD device an IO operation is started to
determine the format of the device. CDL format contains specifically
sized blocks at the beginning of the disk.
For a PPRC secondary device no real IO operation is possible therefore
this IO request can not be started and this step is skipped for online
processing of secondary devices. This is generally fine since the
secondary is a copy of the primary device.
In case of an additional partition detection that is run after a swap
operation the format information is needed to properly drive partition
detection IO.
Currently the information is not passed leading to IO errors during
partition detection and a wrongly detected partition table which in turn
might lead to data corruption on the disk with the wrong partition table.
Fix by passing the format information from primary to secondary device.
Fixes: 413862caad ("s390/dasd: add copy pair swap capability")
Cc: stable@vger.kernel.org #6.1
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://patch.msgid.link/20260310142330.4080106-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40e9cd4ae8 upstream.
Quiesce and resume is a mechanism to suspend operations on DASD devices.
In the context of a controlled copy pair swap operation, the quiesce
operation is usually issued before the actual swap and a resume
afterwards.
During the swap operation, the underlying device is exchanged. Therefore,
the quiesce flag must be moved to the secondary device to ensure a
consistent quiesce state after the swap.
The secondary device itself cannot be suspended separately because there
is no separate block device representation for it.
Fixes: 413862caad ("s390/dasd: add copy pair swap capability")
Cc: stable@vger.kernel.org #6.1
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://patch.msgid.link/20260310142330.4080106-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 186ac39b8a upstream.
In xfs_qm_dqflush(), when a dquot flush fails due to corruption
(the out_abort error path), the original code removed the dquot log
item from the AIL before calling xfs_force_shutdown(). This ordering
introduces a subtle race condition that can lead to data loss after
a crash.
The AIL tracks the oldest dirty metadata in the journal. The position
of the tail item in the AIL determines the log tail LSN, which is the
oldest LSN that must be preserved for crash recovery. When an item is
removed from the AIL, the log tail can advance past the LSN of that item.
The race window is as follows: if the dquot item happens to be at
the tail of the log, removing it from the AIL allows the log tail
to advance. If a concurrent log write is sampling the tail LSN at
the same time and subsequently writes a complete checkpoint (i.e.,
one containing a commit record) to disk before the shutdown takes
effect, the journal will no longer protect the dquot's last
modification. On the next mount, log recovery will not replay the
dquot changes, even though they were never written back to disk,
resulting in silent data loss.
Fix this by calling xfs_force_shutdown() before xfs_trans_ail_delete()
in the out_abort path. Once the log is shut down, no new log writes
can complete with an updated tail LSN, making it safe to remove the
dquot item from the AIL.
Cc: stable@vger.kernel.org
Fixes: b707fffda6 ("xfs: abort consistently on dquot flush failure")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52a8a1ba88 upstream.
If the superblock doesn't list a log stripe unit, we set the incore log
roundoff value to 512. This leads to corrupt logs and unmountable
filesystems in generic/617 on a disk with 4k physical sectors...
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197.
XFS (sda1): failed to locate log tail
XFS (sda1): log mount/recovery failed: error -74
XFS (sda1): log mount failed
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Ending clean mount
...on the current xfsprogs for-next which has a broken mkfs. xfs_info
shows this...
meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=1 metadir=1
data = bsize=4096 blocks=2579968, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=4096 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=268435456 extents
= zoned=0 start=0 reserved=0
...observe that the log section has sectsz=4096 sunit=0, which means
that the roundoff factor is 512, not 4096 as you'd expect. We should
fix mkfs not to generate broken filesystems, but anyone can fuzz the
ondisk superblock so we should be more cautious. I think the inadequate
logic predates commit a6a65fef5e, but that's clearly going to
require a different backport.
Cc: stable@vger.kernel.org # v5.14
Fixes: a6a65fef5e ("xfs: log stripe roundoff is a property of the log")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3beefd3af upstream.
When retrans mount option was introduced, the default value was set
as 1. However, in the light of some bugs that this has exposed recently
we should change it to 0 and retain the old behaviour before this option
was introduced.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55f854dd5b upstream.
Commit c7159e960f ("usbnet: limit max_mtu based on device's hard_mtu")
capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While
this correctly prevents oversized packets on standard USB network
devices, it breaks the qmi_wwan driver.
qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on
the wwan0 interface to configure rx_urb_size via usbnet_change_mtu().
QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and
the USB receive buffers must be sized accordingly. With max_mtu capped
to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the
receive buffers remain small, and download speeds drop from >300 Mbps
to ~0.8 Mbps.
Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet
drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's
driver_info structures to restore the previous behavior for QMI devices,
while keeping the safety fix in place for all other usbnet drivers.
Fixes: c7159e960f ("usbnet: limit max_mtu based on device's hard_mtu")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/
Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Tested-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 029ae06743 upstream.
When a scatterlists table of a GEM shmem object of size 4 GB or more is
populated with pages allocated from a folio, unsigned int .length
attribute of a scatterlist may get overflowed if total byte length of
pages allocated to that single scatterlist happens to reach or cross the
4GB limit. As a consequence, users of the object may suffer from hitting
unexpected, premature end of the object's backing pages.
[278.780187] ------------[ cut here ]------------
[278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915]
...
[278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary)
[278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
[278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915]
...
[278.780786] Call Trace:
[278.780787] <TASK>
[278.780788] ? __apply_to_page_range+0x3e6/0x910
[278.780795] ? __pfx_remap_sg+0x10/0x10 [i915]
[278.780906] apply_to_page_range+0x14/0x30
[278.780908] remap_io_sg+0x14d/0x260 [i915]
[278.781013] vm_fault_cpu+0xd2/0x330 [i915]
[278.781137] __do_fault+0x3a/0x1b0
[278.781140] do_fault+0x322/0x640
[278.781143] __handle_mm_fault+0x938/0xfd0
[278.781150] handle_mm_fault+0x12c/0x300
[278.781152] ? lock_mm_and_find_vma+0x4b/0x760
[278.781155] do_user_addr_fault+0x2d6/0x8e0
[278.781160] exc_page_fault+0x96/0x2c0
[278.781165] asm_exc_page_fault+0x27/0x30
...
That issue was apprehended by the author of a change that introduced it,
and potential risk even annotated with a comment, but then never addressed.
When adding folio pages to a scatterlist table, take care of byte length
of any single scatterlist not exceeding max_segment.
Fixes: 0b62af28f2 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14809
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260224094944.2447913-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 06249b4e69)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f22702dc0 upstream.
The DSI frequency must be in the range:
(CHA_DSI_CLK_RANGE * 5 MHz) <= DSI freq < ((CHA_DSI_CLK_RANGE + 1) * 5 MHz)
So the register value should point to the lower range value, but
DIV_ROUND_UP() rounds the division to the higher range value, resulting in
an excess of 1 (unless the frequency is an exact multiple of 5 MHz).
For example for a 437100000 MHz clock CHA_DSI_CLK_RANGE should be 87 (0x57):
(87 * 5 = 435) <= 437.1 < (88 * 5 = 440)
but current code returns 88 (0x58).
Fix the computation by removing the DIV_ROUND_UP().
Fixes: ceb515ba29 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-1-2e15f5a9a6a0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3646ff2878 upstream.
If discovery has failed for any reason (such as no support for a block)
then there is no need to unwind all the IP blocks in fini. In this
condition there can actually be failures during the unwind too.
Reset num_ip_blocks to zero during failure path and skip the unnecessary
cleanup path.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fae5984296)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Lunn
Ankit Garg
Khairul Anuar Romli
Fedor Pchelkin
Eric Dumazet
Eric Biggers
John Ripple
Adrian Hunter
Yasin Lee
Jean-Baptiste Maneyrol
Antoniu Miclaus
Nuno Sá
Chris Spencer
Lukas Schmid
SeungJu Cheon
Oleksij Rempel
Filipe Manana
Henrique Carvalho
Bharath SM
Paulo Alcantara
Josh Law
Shashank Balaji
Junxiao Bi
Stefan Haberland
Long Li
Darrick J. Wong
Carlos Maiolino
Shyam Prasad N
Laurent Vivier
Calvin Owens
Andrei-Alexandru Tachici
Thomas Fourier
Janusz Krzysztofik
Luca Ceresoli
Mario Limonciello
Alysa Liu
Yang Wang