Add the MSI Vector A16 HX A8WHG (board MS-15MM) to the DMI quirk table
to enable DMIC support. This laptop uses an AMD Ryzen 9 7945HX (Dragon
Range) with the ACP6x audio coprocessor (rev 0x62) and a Realtek ALC274
codec. The built-in digital microphone is connected via the ACP PDM
interface and requires this DMI entry to be activated.
Tested on MSI Vector A16 HX A8WHG with kernel 6.8.0-107 (Ubuntu 24.04).
DMIC capture device appears as 'acp6x' and records audio correctly.
Signed-off-by: Ihor Uzlov <igor.uzlov@gmail.com>
Link: https://patch.msgid.link/20260410094553.24654-1-igor.uzlov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This codec driver depended on the legacy GPIO API, and nothing
in the kernel is defining the platform data, so get rid of this.
Two in-kernel device trees are defining this codec using
undocumented device tree properties, so support these for now.
The same properties can be defined using software nodes if board
files are desired. The device tree use the "-gpio" rather than
"-gpios" suffix but the GPIO DT parser will deal with that.
Since there may be out of tree users, migrate to GPIO descriptors,
drop the platform data that is unused, and assign the dac_clk the
value that was used in all platforms found in a historical dig,
and support setting the clock to the PLL using the undocumented
device tree property.
Add some menuconfig so the codec can be selected and tested.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260409-asoc-uda1380-v3-1-b3d5a53f31be@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Another round of SDCA fixes a couple of fix to the IRQ cleanup
from Richard, and a minor tweak to the IRQ handling from me.
In irq_enable_flags() and sdca_irq_disable() there is a NULL
check on the interrupt data pointer, however this is just pulled
from an array so can never be NULL. This was likely left over
from an earlier version that looked up the data in a different
way. Replace the check with checking for the IRQ itself being
non-zero.
Whilst here also drop the sdca_interrupt structure down into
the loop within the function to better match the style of the
rest of the code in this file.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260409164328.3999434-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix inverted cleanup of the SoundWire IRQ and the function drivers
that use it.
The devm cleanup function to call sdca_dev_unregister_functions() was
being registered at the end of class_sdw_probe(). The bus core
creates the parent SoundWire IRQ handler after class_sdw_probe() has
returned, and it registers a devm cleanup handler at the same time.
This led to a cleanup inversion where the devm cleanup for the parent
Soundwire IRQ runs before the handler that removes the function drivers.
So the parent IRQ is destroyed before the function drivers had a chance
to do any cleanup and remove their IRQ handlers.
Move the registrations of the function driver cleanup into
class_boot_work() after the function drivers are registered, so that it
runs before the cleanup of the parent SoundWire IRQ handler.
Fixes: 2d877d0659 ("ASoC: SDCA: Add basic SDCA class driver")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260409164328.3999434-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Hisilicon hi6210 I2S controller hardware binding from
legacy plain text to modern YAML dt-schema format.
During the conversion, the order of the dma-names properties in the
example was corrected to "tx", "rx" to match the official property
description, resolving a contradiction in the original text binding.
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260327092106.4233-1-chaitanya.msabnis@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ensure that all interrupt handlers are unregistered before the parent
regmap_irq is unregistered.
sdca_irq_cleanup() was only called from the component_remove(). If the
module was loaded and removed without ever being component probed the
FDL interrupts would not be unregistered and this would hit a WARN
when devm called regmap_del_irq_chip() during the removal of the
parent IRQ.
Fixes: 4e53116437 ("ASoC: SDCA: Fix errors in IRQ cleanup")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260408093835.2881486-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The STM32 SAI driver do not set the clock strobing bit (CKSTR) for DSP_A,
DSP_B and LEFT_J formats, causing data to be sampled on the wrong BCLK
edge when SND_SOC_DAIFMT_NB_NF is used.
Per ALSA convention, NB_NF requires sampling on the rising BCLK edge.
The STM32MP25 SAI reference manual states that CKSTR=1 is required for
signals received by the SAI to be sampled on the SCK rising edge.
Without setting CKSTR=1, the SAI samples on the falling edge, violating
the NB_NF convention. For comparison, the NXP FSL SAI driver correctly
sets FSL_SAI_CR2_BCP for DSP_A, DSP_B and LEFT_J, consistent with its
I2S handling.
This patch adds SAI_XCR1_CKSTR for DSP_A, DSP_B and LEFT_J in
stm32_sai_set_dai_fmt which was verified empirically with a cs47l35 codec.
RIGHT_J (LSB) is not investigated and addressed by this patch.
Note: the STM32 I2S driver (stm32_i2s_set_dai_fmt) may have the same issue
for DSP_A mode, as I2S_CGFR_CKPOL is not set. This has not been verified
and is left for a separate investigation.
Signed-off-by: Tomasz Merta <tommerta@gmail.com>
Link: https://patch.msgid.link/20260408084056.20588-1-tommerta@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the driver only performs a hardware reset during the I2C probe
sequence. To ensure all internal states of the codec are properly cleared
without affecting the configuration registers, a software reset is also
required.
According to the hardware specification, writing to the Software Reset
register (R01) twice will reset all internal states safely.
This patch adds the nau8325_software_reset() function, executes it right
after the hardware reset in the probe function, and marks the R01 register
as writeable in the regmap configuration.
Signed-off-by: Neo Chang <YLCHANG2@nuvoton.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260408052639.187149-1-YLCHANG2@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixed PCM device numbering is required for acp pdm dmic pcm device
to have a common UCM changes.
Set the 'use_dai_pcm_id' flag true in acp pdm dma driver for acp 6.3
platform. This will fix the pcm device numbering based on dai_link->id.
Fixes: 33cea6bbe4 ("ASoC: amd: add acp6.2 pdm platform driver")
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Fixes: tag.
Link: https://patch.msgid.link/20260403100624.676953-1-syed.sabakareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The input parameter requirement for snd_pcm_format_physical_with is
snd_pcm_format_t,but params->codec.format is __u32, resulting in a
mismatch error:
sparse warnings: (new ones prefixed by >>)
>> sound/soc/intel/avs/probes.c:147:58: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected restricted snd_pcm_format_t [usertype] format @@ got unsigned int [usertype] format @@
sound/soc/intel/avs/probes.c:147:58: sparse: expected restricted snd_pcm_format_t [usertype] format
sound/soc/intel/avs/probes.c:147:58: sparse: got unsigned int [usertype] format
So here, the format is cast to snd_pcm_format_t.
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512190032.hnwn9mCV-lkp@intel.com/
Link: https://patch.msgid.link/20260325021752.238203-1-songxiebing@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Bard Liao <yung-chuan.liao@linux.intel.com> says:
To make sure find_acpi_adr_device can work well when some of the
endpoints are missing and do not map 1:1 to codec_info_list.
IRQs are enabled through sdca_irq_populate() from component probe
using devm_request_threaded_irq(), this however means the IRQs can
persist if the sound card is torn down. Some of the IRQ handlers
store references to the card and the kcontrols which can then
fail. Some detail of the crash was explained in [1].
Generally it is not advised to use devm outside of bus probe, so
the code is updated to not use devm. The IRQ requests are not moved
to bus probe time as it makes passing the snd_soc_component into
the IRQs very awkward and would the require a second step once the
component is available, so it is simpler to just register the IRQs
at this point, even though that necessitates some manual cleanup.
Link: https://lore.kernel.org/linux-sound/20260310183829.2907805-1-gaggery.tsai@intel.com/ [1]
Fixes: b126394d9e ("ASoC: SDCA: Generic interrupt support")
Reported-by: Gaggery Tsai <gaggery.tsai@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260316141449.2950215-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF compressed offload path accepts codec parameters in
sof_compr_set_params() and forwards them to firmware as
extended data in the SOF IPC stream params message.
However, sof_compr_get_params() still returns success without
filling the snd_codec structure. Since the compress core allocates
that structure zeroed and copies it back to userspace on success,
SNDRV_COMPRESS_GET_PARAMS returns an all-zero codec description
even after the stream has been configured successfully.
The stale TODO in this callback conflates get_params() with capability
discovery. Supported codec enumeration belongs in get_caps() and
get_codec_caps(). get_params() should report the current codec settings.
Cache the codec accepted by sof_compr_set_params() in the per-stream SOF
compress state and return it from sof_compr_get_params().
Fixes: 6324cf901e ("ASoC: SOF: compr: Add compress ops implementation")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260325-sof-compr-get-params-v1-1-0758815f13c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2458adb8f9 ("SoC: simple-card-utils: set 0Hz to sysclk when
shutdown") sends a 0Hz sysclk request during stream shutdown to clear
codec rate constraints. The rt5640 codec forwards this 0Hz to
clk_set_rate(), which can cause clock controller firmware faults on
platforms where MCLK is SoC-driven (e.g. Tegra) and 0Hz falls below
the hardware minimum rate.
Handle the 0Hz case by clearing the internal sysclk state and
returning early, avoiding the invalid clk_set_rate() call.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260406090547.988966-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
Pull perf fix from Ingo Molnar:
- Fix potential bad container_of() in intel_pmu_hw_config() (Ian
Rogers)
* tag 'perf-urgent-2026-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Pull irq fix from Ingo Molnar:
- Fix RISC-V APLIC irqchip driver setup errors on ACPI systems (Jessica
Liu)
* tag 'irq-urgent-2026-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Restrict genpd notifier to device tree only
In eb_lookup_vma(), the code checks that the context vm matches before
incrementing the i915 vma usage count, but for the non-matching case it
didn't clear the non-matching vma pointer, so it would then mistakenly
be returned, causing potential UaF and refcount issues.
Reported-by: Yassine Mounir <sosohero200@gmail.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix TLB uniquification for systems with TLB not initialised by
firmware
- Fix allocation in TLB uniquification
- Fix SiByte cache initialisation
- Check uart parameters from firmware on Loongson64 systems
- Fix clock id mismatch for Ralink SoCs
- Fix GCC version check for __mutli3 workaround
* tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: mm: Allocate tlb_vpn array atomically
MIPS: mm: Rewrite TLB uniquification for the hidden bit feature
MIPS: mm: Suppress TLB uniquification on EHINV hardware
MIPS: Always record SEGBITS in cpu_data.vmbits
MIPS: Fix the GCC version check for `__multi3' workaround
MIPS: SiByte: Bring back cache initialisation
mips: ralink: update CPU clock index
MIPS: Loongson64: env: Check UARTs passed by LEFI cautiously
Pull char/misc/iio driver fixes from Greg KH:
"Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding"
things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues"
* tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
Documentation: fix two typos in latest update to the security report howto
Documentation: clarify the mandatory and desirable info for security reports
Documentation: explain how to find maintainers addresses for security reports
Documentation: minor updates to the security contacts
.get_maintainer.ignore: add myself
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
nvmem: imx: assign nvmem_cell_info::raw_len
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
misc: fastrpc: possible double-free of cctx->remote_heap
comedi: dt2815: add hardware detection to prevent crash
comedi: runflags cannot determine whether to reclaim chanlist
comedi: Reinit dev->spinlock between attachments to low-level drivers
comedi: me_daq: Fix potential overrun of firmware buffer
comedi: me4000: Fix potential overrun of firmware buffer
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
gpib: fix use-after-free in IO ioctl handlers
gpib: lpvo_usb: fix memory leak on disconnect
gpib: Fix fluke driver s390 compile issue
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
lis3lv02d: fix kernel-doc warnings
...
Pull tty fixes from Greg KH:
"Here are two small tty vt fixes for 7.0-rc7 to resolve some reported
issues with the resize ability of the alt screen buffer. Both of these
have been in linux-next all week with no reported issues"
* tag 'tty-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: resize saved unicode buffer on alt screen exit after resize
vt: discard stale unicode buffer on alt screen exit after resize
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
EXPECT_EQ() expands to multiple lines, breaking up one-line if
statements. This issue was not present in the patch on the mailing list
but was instead introduced by the maintainer when attempting to fix up
checkpatch warnings. Add braces around EXPECT_EQ() to avoid the error
even though checkpatch suggests them to be removed:
validate_v_ptrace.c:626:17: error: ‘else’ without a previous ‘if’
Fixes: 3789d5eecd ("selftests: riscv: verify syscalls discard vector context")
Fixes: 30eb191c89 ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 849f05ae1e ("selftests: riscv: verify ptrace accepts valid vector csr values")
Signed-off-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Reviewed-and-tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Link: https://patch.msgid.link/20260309-fix_selftests-v2-2-9d5a553a531e@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
In set_tagged_addr_ctrl(), when PR_TAGGED_ADDR_ENABLE is not set, pmlen
is correctly set to 0, but it forgets to reset pmm. This results in the
CPU pmm state not corresponding to the software pmlen state.
Fix this by resetting pmm along with pmlen.
Fixes: 2e17430858 ("riscv: Add support for the tagged address ABI")
Signed-off-by: Zishun Yi <vulab@iscas.ac.cn>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://patch.msgid.link/20260322160022.21908-1-vulab@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Similar as commit 284922f4c5 ("x86: uaccess: don't use runtime-const
rewriting in modules") does, make riscv's runtime const not usable by
modules too, to "make sure this doesn't get forgotten the next time
somebody wants to do runtime constant optimizations". The reason is
well explained in the above commit: "The runtime-const infrastructure
was never designed to handle the modular case, because the constant
fixup is only done at boot time for core kernel code."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260221023731.3476-1-jszhang@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Jack Yu
Charles Keepax
Ihor Uzlov
Linus Walleij
Qinghua Zhao
Mark Brown
Richard Fitzgerald
Chaitanya Sabnis
Shenghao Ding
Syed Saba Kareem
Maciej Strozek
Kuninori Morimoto
Tomasz Merta
Kai Vehmanen
Neo Chang
Cezary Rojewski
songxiebing
Cássio Gabriel
Mark Pearson
Marek Vasut
Ravi Hothi
Sheetal
Linus Torvalds
Sunil V L
Charlie Jenkins
Paul Walmsley
Zishun Yi
Jisheng Zhang